Unsupervised machine-learning algorithms for the identification of clinical phenotypes in the osteoarthritis initiative database.

OBJECTIVES: Osteoarthritis (OA) is a complex disease comprising diverse underlying patho-mechanisms. To enable the development of effective therapies, segmentation of the heterogenous patient population is critical. This study aimed at identifying such patient clusters using two different machine learning algorithms. METHODS: Using the progression and incident cohorts of the Osteoarthritis Initiative (OAI) dataset, deep embedded clustering (DEC) and multiple factor analysis with clustering (MFAC) approaches, including 157 input-variables at baseline, were employed to differentiate specific patient profiles. RESULTS: DEC resulted in 5 and MFAC in 3 distinct patient phenotypes. Both identified a "comorbid" cluster with higher body mass index (BMI), relevant burden of comorbidity and low levels of physical activity. Both methods also identified a younger and physically more active cluster and an elderly cluster with functional limitations, but low disease impact. The additional two clusters identified with DEC were subgroups of the young/physically active and the elderly/physically inactive clusters. Overall pain trajectories over 9 years were stable, only the numeric rating scale (NRS) for pain showed distinct increase, while physical activity decreased in all clusters. Clusters showed different (though non-significant) trajectories of joint space changes over the follow-up period of 8 years. CONCLUSION: Two different clustering approaches yielded similar patient allocations primarily separating complex "comorbid" patients from healthier subjects, the latter divided in young/physically active vs elderly/physically inactive subjects. The observed association to clinical (pain/physical activity) and structural progression could be helpful for early trial design as strategy to enrich for patients who may specifically benefit from disease-modifying treatments.

Angiopoietin-like 3-derivative LNA043 for cartilage regeneration in osteoarthritis: a randomized phase 1 trial.

Osteoarthritis (OA) is a common, debilitating, chronic disease with no disease-modifying drug approved to date. We discovered LNA043-a derivative of angiopoietin-like 3 (ANGPTL3)-as a potent chondrogenesis inducer using a phenotypic screen with human mesenchymal stem cells. We show that LNA043 promotes chondrogenesis and cartilage matrix synthesis in vitro and regenerates hyaline articular cartilage in preclinical OA and cartilage injury models in vivo. LNA043 exerts at least part of these effects through binding to the fibronectin receptor, integrin α5ß1 on mesenchymal stem cells and chondrocytes. In a first-in-human (phase 1), randomized, double-blinded, placebo-controlled, single ascending dose, single-center trial ( NCT02491281 ; sponsored by Novartis Pharmaceuticals), 28 patients with knee OA were injected intra-articularly with LNA043 or placebo (3:1 ratio) either 2 h, 7 d or 21 d before total knee replacement. LNA043 met its primary safety endpoint and showed short serum pharmacokinetics, cartilage penetration and a lack of immunogenicity (secondary endpoints). Post-hoc transcriptomics profiling of cartilage revealed that a single LNA043 injection reverses the OA transcriptome signature over at least 21 d, inducing the expression of hyaline cartilage matrix components and anabolic signaling pathways, while suppressing mediators of OA progression. LNA043 is a novel disease-modifying OA drug candidate that is currently in a phase 2b trial ( NCT04864392 ) in patients with knee OA.

Relationship between tendon structure, stiffness, gait patterns and patient reported outcomes during the early stages of recovery after an Achilles tendon rupture.

After an Achilles tendon (AT) injury, the decision to return to full weightbearing for the practice of sports or strenuous activities is based on clinical features only. In this study, tendon stiffness and foot plantar pressure, as objective quantitative measures that could potentially inform clinical decision making, were repeatedly measured in 15 patients until 3 months after the AT rupture by using shear wave elastography (SWE) and wearable insoles, respectively. Meanwhile, patient reported outcomes assessing the impact on physical activity were evaluated using the Achilles Tendon Total Rupture Score (ATRS). At week-2 post-injury, stiffness of the injured tendon varied from 6.00 ± 1.62 m/s (mean ± SD) close to the rupture to 8.91 ± 2.29 m/s when measured more distally. While near complete recovery was observed in distal and middle regions at week-8, the shear wave velocity in the proximal region recovered to only 65% of the contralateral value at week-12. In a parallel pre-clinical study, the tendon stiffness measured in vivo by SWE in a rat model was found to be strongly correlated with ex vivo values of the Young's modulus, which attests to the adequacy of SWE for these measures. The insole derived assessment of the plantar pressure distribution during walking showed slight sub-optimal function of the affected foot at week-12, while the ATRS score recovered to a level of 59 ± 16. Significant correlations found between tendon stiffness, insole variables and distinct ATRS activities, suggest clinical relevance of tendon stiffness and foot plantar pressure measurements. These results illustrate how an alteration of the AT structure can impact daily activities of affected patients and show how digital biomarkers can track recovery in function over time.

Correction to: Bone defect reconstruction with a novel biomaterial containing calcium phosphate and aluminum oxide reinforcement.

An amendment to this paper has been published and can be accessed via the original article.

Effects of Interleukin-1ß Inhibition on Incident Hip and Knee Replacement : Exploratory Analyses From a Randomized, Double-Blind, Placebo-Controlled Trial.

BACKGROUND: Osteoarthritis is a common inflammatory disorder with no disease-modifying therapies. Whether inhibition of interleukin-1ß (IL-1ß) can reduce the consequences of large joint osteoarthritis is unclear. OBJECTIVE: To determine whether IL-1ß inhibition with canakinumab reduces incident total hip or knee replacement (THR/TKR). DESIGN: Exploratory analysis of a randomized trial. (ClinicalTrials.gov: NCT01327846). SETTING: 1091 clinical sites in 39 countries. PARTICIPANTS: 10 061 CANTOS (Canakinumab Anti-inflammatory Thrombosis Outcomes Study) participants. INTERVENTION: Random allocation to placebo or canakinumab (50, 150, or 300 mg) subcutaneously once every 3 months. MEASUREMENTS: The primary and secondary outcomes were time to first incident THR/TKR and time to first occurrence of an osteoarthritis-related adverse event (AE). Data were obtained through blinded ascertainment of trial clinical and safety databases. RESULTS: Median follow-up was 3.7 years. For the individual canakinumab dose groups, compared with placebo, hazard ratios (HRs) for incident THR/TKR during follow-up were 0.60 (95% CI, 0.38 to 0.95) for the 50-mg group, 0.53 (CI, 0.33 to 0.84) for the 150-mg group, and 0.60 (CI, 0.38 to 0.93) for the 300-mg group. Thus, in the pooled canakinumab groups, compared with the placebo group, incidence rates for THR/TKR were 0.31 and 0.54 events per 100 person-years (HR, 0.58 [CI, 0.42 to 0.80]; P = 0.001), respectively. The HR for the secondary end point of osteoarthritis-related AEs was 0.73 (CI, 0.61 to 0.87). Similar findings were observed in analyses restricted to participants with a history of osteoarthritis. LIMITATION: Because the parent trial was not designed to examine the efficacy of IL-1ß inhibitors in osteoarthritis, information on structural joint outcomes was not collected. CONCLUSION: Findings from this exploratory analysis of a randomized controlled trial support further investigation of IL-1ß inhibition for treatment of large joint osteoarthritis. PRIMARY FUNDING SOURCE: Novartis Pharmaceuticals.

Bone defect reconstruction with a novel biomaterial containing calcium phosphate and aluminum oxide reinforcement.

BACKGROUND: Reconstruction of metaphyseal fractures represents a clinical challenge for orthopedic surgeons. Especially in osteoporotic bone, these fractures are frequently accompanied by osseous substance defects. In order to ensure rapid mobilization of patients, high stability requirements must be met by osteosynthesis. Various bone graft materials have been introduced in the past, such as autologous bone or exogenous bone substitute materials. These are used as bone void fillers or as augmentation techniques to ensure safe fixation of osteosynthesis. New calcium phosphate-based bone void-filling materials could be a promising alternative to autologous bone or to the currently and widely used polymethylmethacrylate (PMMA)-based cement. The aim of this study was to evaluate a novel paste-like bone void filler in vivo and in vitro with regard to biocompatibility and osteoconductivity. METHODS: In addition to in vitro testing of cell compatibility using pre-osteoblasts (MC3T3-E1), 35 Wistar rats were treated in vivo with implantation of various material mixtures based on calcium phosphate and aluminum oxide reinforcement in a metaphyseal drill hole defect. After 4 weeks, an examination by micro-computed tomography (µCT) and histology was performed. RESULTS: The in vitro analysis showed good biocompatibility with a high cell survival of osteoblasts. In the in vivo experiments, a significantly higher bone ingrowth compared to the empty defect was shown by µCT and histological analysis. Here, the group receiving material reinforced with aluminum oxide (Al2O3) showed a bone volume/tissue volume (BV/TV) of 89.19% compared to a BV/TV of 83.14% for the empty defect (p = 0.0013). In the group treated with a polysaccharide matrix, no increase in BV/TV was observed given a mean ratio of 80.14%. Scoring of histological sections did not reveal a significant difference between CaP and CaP that was substituted with Al2O3. CONCLUSION: The results of this study show an encouraging first step towards the development of new pasty, bone void-filling materials. We demonstrated that a new paste-like bone-filling material, based on calcium phosphate granulates and aluminum oxide to provide strength, exhibits good biocompatibility and osteoconductivity. Further biomechanical test in an osteoporotic animal model will have to be performed, to prove feasibility in metaphyseal defects.

Bone regeneration of minipig mandibular defect by adipose derived mesenchymal stem cells seeded tri-calcium phosphate- poly(D,L-lactide-co-glycolide) scaffolds.

Reconstruction of bone defects represents a serious issue for orthopaedic and maxillofacial surgeons, especially in extensive bone loss. Adipose-derived mesenchymal stem cells (ADSCs) with tri-calcium phosphates (TCP) are widely used for bone regeneration facilitating the formation of bone extracellular matrix to promote reparative osteogenesis. The present study assessed the potential of cell-scaffold constructs for the regeneration of extensive mandibular bone defects in a minipig model. Sixteen skeletally mature miniature pigs were divided into two groups: Control group and scaffolds seeded with osteogenic differentiated pADSCs (n = 8/group). TCP-PLGA scaffolds with or without cells were integrated in the mandibular critical size defects and fixed by titanium osteosynthesis plates. After 12 weeks, ADSCs seeded scaffolds (n = 7) demonstrated significantly higher bone volume (34.8% ± 4.80%) than scaffolds implanted without cells (n = 6, 22.4% ± 9.85%) in the micro-CT (p < 0.05). Moreover, an increased amount of osteocalcin deposition was found in the test group in comparison to the control group (27.98 ± 2.81% vs 17.10 ± 3.57%, p < 0.001). In conclusion, ADSCs seeding on ceramic/polymer scaffolds improves bone regeneration in large mandibular defects. However, further improvement with regard to the osteogenic capacity is necessary to transfer this concept into clinical use.

Decreased Expression of the Human Urea Transporter SLC14A1 in Bone is Induced by Cytokines and Stimulates Adipogenesis of Mesenchymal Progenitor Cells.

The human urea transporter SLC14A1 (HUT11/UT-B) has been suggested as a marker for the adipogenic differentiation of bone cells with a relevance for bone diseases. We investigated the function of SLC14A1 in different cells models from bone environment. SLC14A1 expression and cytokine production was investigated in bone cells obtained from patients with osteoporosis. Gene and protein expression of SLC14A1 was studied during adipogenic or osteogenic differentiation of human mesenchymal progenitor cells (hMSCs) and of the single-cell-derived hMSC line (SCP-1), as well as in osteoclasts and chondrocytes. Localization was determined by histochemical methods and functionality by urea transport experiments. Expression of SLC14A1 mRNA was lower in cells from patients with osteoporosis that produced high levels of cytokines. Accordingly, when adding a combination of cytokines to SCP-1 SLC14A1 mRNA expression decreased. SLC14A1 mRNA expression decreased after both osteogenic and more pronounced adipogenic stimulation of hMSCs and SCP-1 cells. The highest SLC14A1 expression was determined in undifferentiated cells, lowest in chondrocytes and osteoclasts. Downregulation of SLC14A1 by siRNA resulted in an increased expression of interleukin-6 and interleukin-1 beta as well as adipogenic markers. Urea influx through SLC14A1 increased expression of osteogenic markers, adipogenic markers were suppressed. SLC14A1 protein was localized in the cell membrane and the cytoplasm. Summarizing, the SLC14A1 urea transporter affects early differentiation of hMSCs by diminishing osteogenesis or by favoring adipogenesis, depending on its expression level. Therefore, SLC14A1 is not unequivocally an adipogenic marker in bone. Our findings suggest an involvement of SLC14A1 in bone metabolism and inflammatory processes and disease-dependent influences on its expression.

Continuous Digital Monitoring of Walking Speed in Frail Elderly Patients: Noninterventional Validation Study and Longitudinal Clinical Trial.

BACKGROUND: Digital technologies and advanced analytics have drastically improved our ability to capture and interpret health-relevant data from patients. However, only limited data and results have been published that demonstrate accuracy in target indications, real-world feasibility, or the validity and value of these novel approaches. OBJECTIVE: This study aimed to establish accuracy, feasibility, and validity of continuous digital monitoring of walking speed in frail, elderly patients with sarcopenia and to create an open source repository of raw, derived, and reference data as a resource for the community. METHODS: Data described here were collected as a part of 2 clinical studies: an independent, noninterventional validation study and a phase 2b interventional clinical trial in older adults with sarcopenia. In both studies, participants were monitored by using a waist-worn inertial sensor. The cross-sectional, independent validation study collected data at a single site from 26 naturally slow-walking elderly subjects during a parcours course through the clinic, designed to simulate a real-world environment. In the phase 2b interventional clinical trial, 217 patients with sarcopenia were recruited across 32 sites globally, where patients were monitored over 25 weeks, both during and between visits. RESULTS: We have demonstrated that our approach can capture in-clinic gait speed in frail slow-walking adults with a residual standard error of 0.08 m per second in the independent validation study and 0.08, 0.09, and 0.07 m per second for the 4 m walk test (4mWT), 6-min walk test (6MWT), and 400 m walk test (400mWT) standard gait speed assessments, respectively, in the interventional clinical trial. We demonstrated the feasibility of our approach by capturing 9668 patient-days of real-world data from 192 patients and 32 sites, as part of the interventional clinical trial. We derived inferred contextual information describing the length of a given walking bout and uncovered positive associations between the short 4mWT gait speed assessment and gait speed in bouts between 5 and 20 steps (correlation of 0.23) and longer 6MWT and 400mWT assessments with bouts of 80 to 640 steps (correlations of 0.48 and 0.59, respectively). CONCLUSIONS: This study showed, for the first time, accurate capture of real-world gait speed in slow-walking older adults with sarcopenia. We demonstrated the feasibility of long-term digital monitoring of mobility in geriatric populations, establishing that sufficient data can be collected to allow robust monitoring of gait behaviors outside the clinic, even in the absence of feedback or incentives. Using inferred context, we demonstrated the ecological validity of in-clinic gait assessments, describing positive associations between in-clinic performance and real-world walking behavior. We make all data available as an open source resource for the community, providing a basis for further study of the relationship between standardized physical performance assessment and real-world behavior and independence.

Growth factor-mediated augmentation of long bones: evaluation of a BMP-7 loaded thermoresponsive hydrogel in a murine femoral intramedullary injection model.

BACKGROUND: Due to our aging population, an increase in proximal femur fractures can be expected, which is associated with impaired activities of daily living and a high risk of mortality. These patients are also at a high risk to suffer a secondary osteoporosis-related fracture on the contralateral hip. In this context, growth factors could open the field for regenerative approaches, as it is known that, i.e., the growth factor BMP-7 (bone morphogenetic protein 7) is a potent stimulator of osteogenesis. Local prophylactic augmentation of the proximal femur with a BMP-7 loaded thermoresponsive hydrogel during index surgery of an osteoporotic fracture could be suitable to reduce the risk of further osteoporosis-associated secondary fractures. The present study therefore aims to test the hypothesis if a BMP-7 augmented hydrogel is an applicable carrier for the augmentation of non-fractured proximal femurs. Furthermore, it needs to be shown that the minimally invasive injection of a hydrogel into the mouse femur is technically feasible. METHODS: In this study, male C57BL/6 mice (n = 36) received a unilateral femoral intramedullary injection of either 100 µl saline, 100 µl 1,4 Butan-Diisocyanat (BDI)-hydrogel, or 100 µl hydrogel loaded with 1 µg of bone morphogenetic protein 7. Mice were sacrificed 4 and 12 weeks later. The femora were submitted to high-resolution X-ray tomography and subsequent histological examination. RESULTS: Analysis of normalized CtBMD (Cortical bone mineral density) as obtained by X-ray micro-computed tomography analysis revealed significant differences depending on the duration of treatment (4 vs 12 weeks; p < 0.05). Furthermore, within different anatomically defined regions of interest, significant associations between normalized TbN (trabecular number) and BV/TV (percent bone volume) were noted. Histology indicated no signs of inflammation and no signs of necrosis and there were no cartilage damages, no new bone formations, or new cartilage tissues, while BMP-7 was readily detectable in all of the samples. CONCLUSIONS: In conclusion, the murine femoral intramedullary injection model appears to be feasible and worth to be used in subsequent studies that are directed to examine the therapeutic potential of BMP-7 loaded BDI-hydrogel. Although we were unable to detect any significant osseous effects arising from the mode or duration of treatment in the present trial, the effect of different concentrations and duration of treatment in an osteoporotic model appears of interest for further experiments to reach translation into clinic and open new strategies of growth factor-mediated augmentation.

A laser-cutting-based manufacturing process for the generation of three-dimensional scaffolds for tissue engineering using Polycaprolactone/Hydroxyapatite composite polymer.

A manufacturing process for sheet-based stacked scaffolds (SSCs) based on laser-cutting (LC) was developed. The sheets consist of Polycaprolactone/Hydroxyapatite (PCL/HA) composite material. Single sheets were cut from a PCL/HA foil and stacked to scaffolds with interconnecting pores of defined sizes. HA quantities up to 50% were processable with high reproducibility, while the accuracy was dependent on the applied laser power. The smallest achievable pore sizes were about 40 µm, while the smallest stable solid structures were about 125 µm. The human mesenchymal stem cell line SCP-1 was cultured on the manufactured PCL/HA scaffolds. The cells developed a natural morphology and were able to differentiate to functional osteoblasts. The generation of PCL/HA SSCs via LC offers new possibilities for tissue engineering (TE) approaches. It is reliable and fast, with high resolution. The SSC approach allows for facile cell seeding and analysis of cell fate within the three-dimensional cell culture, thus allowing for the generation of functional tissue constructs.

Validity of accelerometry in step detection and gait speed measurement in orthogeriatric patients.

BACKGROUND: Mobile accelerometry is a powerful and promising option to capture long-term changes in gait in both clinical and real-world scenarios. Increasingly, gait parameters have demonstrated their value as clinical outcome parameters, but validation of these parameters in elderly patients is still limited. OBJECTIVE: The aim of this study was to implement a validation framework appropriate for elderly patients and representative of real-world settings, and to use this framework to test and improve algorithms for mobile accelerometry data in an orthogeriatric population. METHODS: Twenty elderly subjects wearing a 3D-accelerometer completed a parcours imitating a real-world scenario. High-definition video and mobile reference speed capture served to validate different algorithms. RESULTS: Particularly at slow gait speeds, relevant improvements in accuracy have been achieved. Compared to the reference the deviation was less than 1% in step detection and less than 0.05 m/s in gait speed measurements, even for slow walking subjects (< 0.8 m/s). CONCLUSION: With the described setup, algorithms for step and gait speed detection have successfully been validated in an elderly population and demonstrated to have improved performance versus previously published algorithms. These results are promising that long-term and/or real-world measurements are possible with an acceptable accuracy even in elderly frail patients with slow gait speeds.

Tenomodulin regulates matrix remodeling of mouse tendon stem/progenitor cells in an ex vivo collagen I gel model.

Tenomodulin (Tnmd) is predominantly expressed in tendon and ligament tissues. Loss of Tnmd in mice leads to a profound phenotype in vitro, characterized by reduced self-renewal but increased senescence of mouse tendon stem/progenitor cells (mTSPCs), as well as in vivo, by significantly impaired early tendon healing. Interestingly, injuried Achilles tendons from Tnmd-deficient mice showed inferior tendon repair, which was characterized by less contracted fibrovascular scars with disorganized matrix composition in comparison to wild type (WT) mice at day 8 after injury. To better understand Tnmd role in tendon repair, here we implemented an ex vivo three-dimensional (3D) collagen gel model and investigated whether Tnmd knockout affects the collagen contraction of mTSPCs. TSPCs were isolated from WT and Tnmd knockout (KO) tendons at 6, 9, 12, and 18 months of age. Adhesion assay demonstrated that loss of Tnmd in mTSPCs resulted in reduced adhesion to collagen type I. Quantitative time-dependent analysis revealed that Tnmd-deficient mTSPCs of all ages have significantly reduced capacity to contract collagen matrix in comparison to WT cells. Furthermore, 18 months old mTSPCs of both genotypes showed lower collagen contractility than cells obtained from 6, 9, and 12 months old animals, demonstrating an overall effect of organismal aging on matrix remodeling. Nevertheless, both cell types had a similar survival rate for the 5 days of cultivation within the gels. Lastly, quantitative PCR for 48 different genes revealed that the knockout of Tnmd majorly affected the gene expression profile of mTSPCs, as several transcription factors, tendon matrix, collagen cross-linking, and lineage maker genes were down-regulated. Taken together, our results clearly demonstrated that loss of Tnmd in mTSPCs led to profoundly altered gene expression profile, insufficient adhesion to collagen type I, and impaired ability to contract the extracellular matrix.

Quantifying Functional Difference in Centre of Pressure Post Achilles Tendon Rupture using Sensor Insoles.

Significant advances are being made to instrument and more objectively quantify gait and mobility assessment, treatment and rehabilitation. Wearable, inertial, optical and location-based technologies are proposed as scalable soutions, suited to both clinic and home-based settings, that can provide clinically meaningful insights into gait and mobility. In this paper, sensorised insoles are shown to provide the means to measure where pressure is distributed through each foot for each step, while it is in contact with the ground. Through profiling the points through which pressure is applied over each step and comparing changes between the affected and healthy limbs, insights into biomechanical foot dysfunction are shown for a patient population which may inform assessment, treatment and rehabilitation. This paper proposes a series of sensor-agnostic metrics derived from sensorised insoles to quantify foot mobility over a series of steps in a patient population. Differences in these metrics are shown between the affected and unaffected foot in a cohort of patients 8 weeks post Achilles tendon rupture.

DigitalROM: Development and validation of a system for assessment of shoulder range of motion.

Assessing shoulder mobility is traditionally performed by a clinician using a goniometer, however this method suffers from inter-rater reliability issues. Wearable inertial sensors, image-based systems and 3D-cameras are proposed to objectively quantify shoulder range of motion (ROM). Standardised data collection platforms are required to ensure the consistency of measurements. This paper describes DigitalROM, a Microsoft Kinect 3D camera based system, and a standardised data collection protocol for shoulder ROM assessment optimised for multi-centre clinical trial deployments. DigitalROM is shown to compare very well against image-based ground truth measures (R2= 0.98 and RMSE≤7°) and shows slightly better performance than inertial sensor based ROM measurements (R2= 0.96 and RMSE≤9°). Additionally, DigitalROM offers the ability to ensure patient adherence to the movement protocol during data collection.

Characterization of human telomerase reverse transcriptase immortalized anterior cruciate ligament cell lines.

BACKGROUND: The anterior-cruciate-ligament (ACL) contains mesenchymal stem cells (ACL-MSCs), suggesting the feasibility of regenerative treatments of this tissue. The immortalization of isolated cells results in cell-lines applicable to develop cell-based therapies. Immortal cell lines eliminate the need for frequent cell isolation from donor tissues. The objective of this study was to characterize cell lines that were generated from isolated ACL-MSCs using TERT gene transfer. METHODS: We isolated ACL-MSCs from human ACLs derived at the time of ACL reconstruction surgery or total knee arthroplasty. We generated cell lines and compared them to non-immortalized ACL-MSCs. We assessed the cellular morphology and we detected surface antigen expression. The resistance to senescence was inferred using the beta galactosidase activity. Histology, immunohistochemistry, and reverse transcriptase polymerase chain reaction (RT-PCR) were used to evaluate the multilineage differentiation capacity. RESULTS: The morphology of hTERT-ACL-MSCs was similar to ACL up to the last assessment at passage eight. We detected a strong surface expression of CD44, CD90, CD105, and STRO-1 in hTERT-ACL-MSCs. No substantial reduction in the ATP activity was observed in hTERT-ACL-MSCs. CONCLUSION: Cell lines generated from ACL-MSCs maintain their morphology, surface antigen expression profile, and proliferative capacity; while markers of senescence appear to be reduced. These cell-lines maintained their multilineage differentiation capacity. The demonstrated model systems can be used for further development of new cell-based regenerative approaches in anterior cruciate ligament research, which may lead to new therapeutic strategies in the future.

A Perfusion Bioreactor System for Cell Seeding and Oxygen-Controlled Cultivation of Three-Dimensional Cell Cultures.

Bioreactor systems facilitate three-dimensional (3D) cell culture by coping with limitations of static cultivation techniques. To allow for the investigation of proper cultivation conditions and the reproducible generation of tissue-engineered grafts, a bioreactor system, which comprises the control of crucial cultivation parameters in independent-operating parallel bioreactors, is beneficial. Furthermore, the use of a bioreactor as an automated cell seeding tool enables even cell distributions on stable scaffolds. In this study, we developed a perfusion microbioreactor system, which enables the cultivation of 3D cell cultures in an oxygen-controlled environment in up to four independent-operating bioreactors. Therefore, perfusion microbioreactors were designed with the help of computer-aided design, and manufactured using the 3D printing technologies stereolithography and fused deposition modeling. A uniform flow distribution in the microbioreactor was shown using a computational fluid dynamics model. For oxygen measurements, microsensors were integrated in the bioreactors to measure the oxygen concentration (OC) in the geometric center of the 3D cell cultures. To control the OC in each bioreactor independently, an automated feedback loop was developed, which adjusts the perfusion velocity according to the oxygen sensor signal. Furthermore, an automated cell seeding protocol was implemented to facilitate the even distribution of cells within a stable scaffold in a reproducible way. As proof of concept, the human mesenchymal stem cell line SCP-1 was seeded on bovine cancellous bone matrix of 1 cm3 and cultivated in the developed microbioreactor system at different oxygen levels. The oxygen control was capable to maintain preset oxygen levels ±0.5% over a cultivation period of several days. Using the automated cell seeding procedure resulted in evenly distributed cells within a stable scaffold. In summary, the developed microbioreactor system enables the cultivation of 3D cell cultures in an automated and thus reproducible way by providing up to four independently operating, oxygen-controlled bioreactors. In combination with the automated cell seeding procedure, the bioreactor system opens up new possibilities to conduct more reproducible experiments to investigate optimal cultivation parameters and to generate tissue-engineering grafts in an oxygen-controlled environment.

In Vitro Comparison of 2D-Cell Culture and 3D-Cell Sheets of Scleraxis-Programmed Bone Marrow Derived Mesenchymal Stem Cells to Primary Tendon Stem/Progenitor Cells for Tendon Repair.

The poor and slow healing capacity of tendons requires novel strategies to speed up the tendon repair process. Hence, new and promising developments in tendon tissue engineering have become increasingly relevant. Previously, we have established a tendon progenitor cell line via ectopic expression of the tendon-related basic helix-loop-helix (bHLH) transcription factor Scleraxis (Scx) in human bone marrow mesenchymal stem cells (hMSC-Scx). The aim of this study was to directly compare the characteristics of hMSC-Scx cells to that of primary human tendon stem/progenitors cells (hTSPCs) via assessment of self-renewal and multipotency, gene marker expression profiling, in vitro wound healing assay and three-dimensional cell sheet formation. As expected, hTSPCs were more naive than hMSC-Scx cells because of higher clonogenicity, trilineage differentiation potential, and expression of stem cell markers, as well as higher mRNA levels of several gene factors associated with early tendon development. Interestingly, with regards to wound healing, both cell types demonstrate a comparable speed of scratch closure, as well as migratory velocity and distance in various migration experiments. In the three-dimensional cell sheet model, hMSC-Scx cells and hTSPCs form compact tendinous sheets as histological staining, and transmission electron microscopy shows spindle-shaped cells and collagen type I fibrils with similar average diameter size and distribution. Taken together, hTSPCs exceed hMSC-Scx cells in several characteristics, namely clonogenicity, multipotentiality, gene expression profile and rates of tendon-like sheet formation, whilst in three-dimensional cell sheets, both cell types have comparable in vitro healing potential and collagenous composition of their three-dimensional cell sheets, making both cell types a suitable cell source for tendon tissue engineering and healing.

IL-6, IL-1ß, and TNF-α only in combination influence the osteoporotic phenotype in Crohn's patients via bone formation and bone resorption.

BACKGROUND: Crohn´s disease (CD) is associated with a higher prevalence of osteoporosis. The pathogenesis of bone affliction remains controversial, especially if inflammatory cytokines or glucocorticoid therapy are the main contributors. In postmenopausal osteoporosis, bone resorption is induced by IL-6, IL-1ß and TNF-α. In contrast, in children with CD, IL-6 exclusively decreased bone formation without affecting bone resorption. OBJECTIVES: The objective of this study was to further clarify the pathophysiology of bone affliction in adult patients with CD with the use of an osteoblast and osteoclast cell model. MATERIAL AND METHODS: Inflammatory cytokines IL-6, IL-1ß, and TNF-α were measured in adult CD patients' serum. Mean values of these cytokines were applied with or without dexamethasone to the human cell line SCP-1 (osteoblastic cell model). Also, the effect of cytokines on primary human osteoclast differentiation and activity was determined. RESULTS: The combined cytokine application increased the receptor activator of NF-κB ligand/osteoprotegerin (RANKL/OPG) ratio 2-fold after 2 and 14 days. Additional application of dexamethasone to SCP-1 cells further increased the RANKL/OPG ratio 3-fold, but decreased IL-6 and IL-1ß expression to 10% and 50%, respectively. TNF-α expression was maximally suppressed to 16% by dexamethasone in the presence of cytokines. In osteoclasts, the combined cytokine treatment decreased expression of characteristic genes to approx. 30%, while increasing osteoclast resorption activity to 148%. In addition, a cytokine stimulated osteoblast cell culture-generated supernatant stimulated osteoclast resorption activity by 170%. CONCLUSIONS: Our results suggest that IL-6, IL-1ß, and TNF-α only in combination induced osteoclaststimulating activity represented by the RANKL/OPG ratio in osteoblasts. Dexamethasone further increased this effect in osteoblasts, while decreasing cytokine expression. The results in osteoclasts support a direct and osteoblast-mediated effect on bone resorption. Our in vitro results differentiate for the first time the effect of cytokines on bone turnover as measured in adult CD patients from the additional dexamethasone effect on osteoblasts as part of the pathophysiology of osteoporosis.

Functionalized thermosensitive hydrogel combined with tendon stem/progenitor cells as injectable cell delivery carrier for tendon tissue engineering.

Thermosensitive hydrogels have been studied for potential application as promising alternative cell carriers in cell-based regenerative therapies. In this study, a thermosensitive butane diisocyanate (BDI)-collagen hydrogel (BC hydrogel) was designed as an injectable cell delivery carrier of tendon stem/progenitor cells (TSPCs) for tendon tissue engineering. We functionalized the BDI hydrogel with the addition of 20% (v/v) collagen I gel to obtain the thermosensitive BC hydrogel, which was then seeded with TSPCs derived from human Achilles tendons. The BC hydrogel compatibility and TSPC behavior and molecular response to the 3D hydrogel were investigated. Collagen (COL) I gel served as a control group. Our findings demonstrated that the BC hydrogel was thermosensitive, and hardened above 25 °C. It supported TSPC survival, proliferation, and metabolic activity with satisfactory dimension stability and biocompatibility, as revealed by gel contraction assay, live/dead staining, DNA quantification, and resazurin metabolic assay. Phalloidin-based visualization of F-actin demonstrated that the TSPCs were stretched within COL I gel with classical spindle cell shapes; similar cell morphologies were also found in the BC hydrogel. The gene expression profile of TSPCs in the BC hydrogel was comparable with that in COL I gel. Moreover, the BC hydrogel supported capillary-like structure formation by human umbilical vein endothelial cells (HUVECs) in the hydrogel matrix. Taken together, these results suggest that the thermosensitive BC hydrogel holds great potential as an injectable cell delivery carrier of TSPCs for tendon tissue engineering.