[Milch-Zahnerhaltung am Limit (?)].

Das kongenitale Fehlen von Milchzähnen ist ein Problem. Mit Ausnahme der dritten Molaren sind die zweiten Unterkiefer-Prämolaren (2.5-4.5%) am häufigsten betroffen. Der Erhalt des Vorgängerzahnes ist eine Möglichkeit, den Platz zu erhalten und die definitive prothetische Entscheidung hinauszuzögern. Eine Literaturübersicht fand pathologiefreie Überlebensraten von 82-89 % über einen Zeitraum von 5-13 Jahren. Neben Karies und Gingivitis stellen eine Infraokklusion oder Wurzelresorption typische biologische Komplikationen dar.

Tooth preservation and "the treatable or hopeless tooth": Re-thinking a concept / Zahnerhaltung und «Der behandlungsunwürdige oder hoffnungslose Zahn¼: Ein Konzept, das man überdenken sollte?

The masticatory organ is at the center of dental practice. Tooth loss, regarded as an organ failure, is a core dispute in our profession, as it more often than not does not happen spon-taneously but is influenced by the dentist's treatment plan. Despite the prosthetic possibili-ties of tooth replacement, efforts should be made to preserve as many teeth as possible. Decisions between tooth preservation and extraction are complex and have far-reaching consequences. This article discusses this problem using a clinical case study of a 43-year-old female patient with pronounced localized periodontitis. After a comprehensive diagnosis and treatment planning, a daring regenerative therapy was carried out to try to preserve the tooth. The case shows that even seemingly hopeless teeth can be successfully treated syn-chronously using modern therapeutic approaches. Initial literature data supports the possi-bility of preserving severely compromised teeth in the long term in compliant patients. An integrative treatment approach based on individual patient factors and modern regenerative techniques may well be a viable alternative to tooth extraction and prosthetic restoration, albeit not inexpensive and uncomplicated. This communication emphasizes the need for precise diagnostics, a comprehensive treatment plan, and honest communication with pa-tients about the prospects of success and possible risks, and highlights the strengths of con-sistent tooth preservation.

Maintaining periodontally compromised teeth seems more cost-effective than replacing them with dental implants.

DESIGN: A systematic appraisal without statistical aggregation. DATA SOURCES: The researchers utilized Ovid (Medline), Embase, Web of Science, and CINAHL databases. They performed a comprehensive literature search, which concluded in July 2023. References of selected studies and systematic reviews were examined for additional relevant articles. STUDY SELECTION: The review included studies (randomized controlled trials [RCTs], systematic reviews [SRs], narrative reviews, retrospective studies, cross-sectional studies, case series, case reports) discussing the cost-effectiveness of preserving teeth versus replacing them with implants in patients with severe periodontal disease. Non-English publications, letters, conference abstracts, and brief reports were excluded. DATA EXTRACTION AND SYNTHESIS: Two reviewers independently screened titles and abstracts using a systematic review screening tool, resolving conflicts with a third reviewer. The extracted data included study design, patient demographics, treatment details, economic models, costs, and clinical implications. Quality was assessed using Joanna Briggs Institute (JBI) critical appraisal tools, with scores converted to percentages. RESULTS: A total of 633 studies were identified for periodontal treatment, with 9 included after screening, while 114 studies were identified for dental implants, of which 3 were included after screening. The included studies were published between 2008 and 2018, predominantly from Germany, and mainly comprised retrospective designs, along with some prospective and model-based analyses. Follow-up periods ranged from 36 months to 33 years. Treatment costs were found to increase with disease severity, with surgical treatments being more expensive than nonsurgical ones, and supportive periodontal treatment (SPT) representing the highest cost share in periodontal treatment. Maintaining implants proved more costly than maintaining teeth, especially in cases of peri-implantitis. For chronic periodontitis, total treatment costs per tooth were €222 ± €98 over 18.7 years, and for aggressive periodontitis, €267 ± €148 over 16.9 years. Regular SPT cost €806 per tooth per year over 28.7 years, with significant cost variations across studies. A 2013 study found that maintaining implants was five times costlier than maintaining teeth, particularly if peri-implantitis developed. A 2018 study indicated that implant-supported crowns (ISCs) were the most expensive therapy. Only one study directly compared costs within the same patient, finding periodontal treatment to be more cost-effective than implants. Costs also increased with irregular SPT, aggressive periodontitis, and specialist treatments compared to regular SPT, chronic periodontitis, and treatments by general dental practitioners. The quality of included studies scored between 45% and 84.6%, indicating moderate to high quality, with methodological issues including unclear strategies for handling confounding factors and incomplete follow-up. CONCLUSIONS: Implants are effective for replacing missing teeth but are associated with higher long-term costs and complications. Maintaining periodontally compromised teeth is generally more cost-effective, therefore, maintenance costs and potential complications should be carefully considered in treatment planning. There is a need for studies comparing the long-term cost-effectiveness of saving teeth compared to replacing them with implants, considering several variables for informed clinical decision-making.

Comparison of clinical parameters of peri-implantitis and parameters related to tissue macrophage sensitization on TiO2.

OBJECTIVE: Dental implants show impressive survival and like rates, but peri-implantitis is a frequent inflammatory disease which affects the implant-surrounding tissues. While biofilms on the implant surface is considered its etiologic reason, several risk factors determine the pace of progression of peri-implant bone loss. Some risk factors are generally accepted while others are still unconfirmed and a matter of ongoing discussion. Among the latter, tissue macrophage sensitization on TiO2 has gained scientific interest in recent years. The aim of the present case-control study was to test for potential associations between clinically manifest peri-implantitis and MS related parameters. MATERIALS AND METHODS: In patients with implants affected by peri-implantitis in the test group and healthy implants in the control group clinical parameters (peri-implant pocket depths (PPD) and bleeding on probing (BOP) were measured. Samples of aMMP-8 were taken from the entrance of the peri-implant sulcus and bacterial samples were collected from the sulcus. Blood samples were obtained from the basilic vein to assess MA-related laboratory parameters. Potential correlations between clinical and laboratory parameters were tested by multiple regression (p < 0.05). RESULTS: No statistically significant correlations were found between clinical or bacteriological findings and laboratory parameters were found. CONCLUSIONS: Based on the findings of this study elevated MA-related laboratory parameters do not appear to be linked to peri-implantitis. CLINICAL RELEVANCE: Sensitization on TiO2 is not associated with clinical symptoms of peri-implantitis.

Injectable Platelet-Rich Fibrin and Advanced Platelet-Rich Fibrin Demonstrate Enhanced Anti-Biofilm Effect Compared to Enamel Matrix Derivatives on Decontaminated Titanium Surfaces.

BACKGROUND: The search for effective antimicrobial agents to mitigate peri-implant infections remains a crucial aspect of implant dentistry. This study aimed to evaluate and compare the antimicrobial efficacy of i-PRF, A-PRF+, and enamel matrix derivative (EMD) on decontaminated rough and smooth titanium (Ti) discs. MATERIALS AND METHODS: Rough and smooth Ti discs were coated with multispecies biofilm and thoroughly debrided using a chitosan-bristled brush. Subsequently, i-PRF, A-PRF+, and EMD were applied. Untreated discs served as control. Residual adherent bacteria present on the treated Ti discs were visualized by SEM and quantified using culture technique, and colony-forming units (CFUs) were measured after 48 h and 7 days. RESULTS: i-PRF demonstrated better antimicrobial effectiveness on both smooth and rough implant surfaces as compared to A-PRF+ and EMD (p < 0.001). In all the experimental groups, smooth Ti discs displayed a greater reduction in microbes compared to rough Ti discs when treated with the biologics. The major reduction in CFU values was determined after seven days. CONCLUSIONS: i-PRF as a regenerative material may also be suitable for decontaminating implant surfaces, which could influence tissue healing and regenerative outcomes positively.

In vitro and in vivo investigation of antibacterial silver nanoparticles functionalized bone grafting substitutes.

Infection is a major concern in surgery involving grafting and should be considered thoroughly when designing biomaterials. There is considerable renewed interest in silver nanoparticles (AgNPs) owing to their ability to potentiate antibacterial properties against multiple bacterial strains. This study aimed to develop two antibacterial bone regenerative scaffolds by integrating AgNPs in bovine bone particles (BBX) (Product 1), and a light cross-linked hydrogel GelMA (Product 2). The constructs were characterized using scanning electron microscopy. Metabolic activity of osteoblasts and osteoclasts on the constructs was investigated using PrestoBlue™. Disk diffusion assay was conducted to test the antibacterial properties. The regenerative capacity of the optimized AgNP functionalized BBX and GelMA were tested in a rabbit cranial 6 mm defect model. The presence of AgNPs appears to enhance proliferation of osteoblasts compared to AgNP free controls in vitro. We established that AgNPs can be used at a 100 µg dose that inhibits bacteria, with minimal adverse effects on the bone cells. Our rabbit model revealed that both the BBX and GelMA hydrogels loaded AgNPs were biocompatible with no signs of necrosis or inflammatory response. Grafts functionalized with AgNPs can provide antibacterial protection and simultaneously act as a scaffold for attachment of bone cells.

A proof of concept on implant-supported bilateral cantilever bridges: The T-Bridge approach.

The concept of bilateral cantilevers on a single central implant (T-design) for three-unit implant-supported fixed dental prostheses (ISFDPs) has not been explored nor tested. This technical hypothesis aimed to explore the feasibility of such an approach as a cost-effective alternative to conventional treatments. Careful considerations regarding implant diameter, length, ideal position, occlusal scheme, and bone remodeling are essential to ensure adequate support, stability, and prevention of complications. In this proof of concept, we present a preliminary case with this novel design to replace missing posterior teeth in a patient with narrow bone conditions. In addition, a series of planned investigations and preliminary results, including preclinical studies, are presented to illustrate our concept and its potential clinical implications. Clinically, after two-year follow-up, healthy and stable peri-implant tissues around the ISFDP exemplarily demonstrated excellent stability, functionality, and comfort, which is supported by acceptable fracture resistance data in vitro, suggesting indeed the practical potential and suitability. Thus, we claim that such a treatment modality has the at least theoretical potential to revolutionize implant dentistry by providing innovative and cost-effective treatment options for patients with partial ISFDPs in very specific cases. Of course, further research and evaluations are necessary to validate the clinical implications of this innovative hypothesis. Implementing the 3-on-1 T-bridge approach in partial ISFDPs could offer a promising alternative to traditional methods. If proven successful, this technique may lead to significant advancements in clinical practice, providing a less invasive cost-effective treatment option.

[Autologous platelet concentrates in regenerative dentistry - A narrative literature review. Part II: clinical application of PRF in periodontology and implantology].

The clinical impact of platelet-rich fibrin (PRF) and plasma rich in growth factors (PRGF®) respectively has been studied extensively in the field of regenerative dentistry during the last two decades. Literature supports evidence for additional benefits in regenerative periodontal therapy, alveolar ridge preservation, management of extraction sockets, implantology including guided bone regeneration as well as defect management in oral surgery. Regarding gingival wound healing and soft tissue regeneration, there is sufficient evidence for their positive effects which have been confirmed in several systematic reviews. The effects seem less clear in conjunction with osseous regenerative treatments, where the inter-study heterogenity in terms of different PRF-protocols, indications and application forms might hinder a systematic comparison. Nevertheless there is evidence that PRF might have beneficial effects on hard-tissue or its regeneration respectively.For being able to facilitate conclusions in systematic reviews, precise reporting of the used PRF-protocols is mandatory for future (clinical) research in the field of autologous platelet concentrates.

[Autologous platelet concentrates in regenerative dentistry - A narrative literature review. Part I: Theoretical and legal aspects of the PR(G)F application].

The use of autologous platelet concentrates (APC) such as platelet-rich fibrin (PRF) and/or plasma rich in growth factors (PRGF®) is considered an established treatment modality in re-generative dentistry. The possibility of delivering growth factors over aclinically relevant time of several days seems particularly interesting in the context of wound healing.The growing body of evidence in the field of APC requires a continuous and actual knowledge of the literature for being able to make evidence-based treatment recommendations with a realistic assessment of possible advantages of this technology.PR(G)F can be applied in solid or liquid form, pure or in combination with other biomaterials. Both appear to be reasonable, depending on the clinical indication and/or desired treatment outcomes. Because of the many different factors that can affect the PR(G)F products final characteristics, a basic understanding of these parameters is desirable for choosing the most suitable product and/or optimizing its clinical application. This review aims to provide an over-view of relevant theoretical, practical, legal and biologic aspects of APCs.

Assessing the Impact of Various Decontamination Instruments on Titanium and Zirconia Dental Implants: An In Vitro Study.

This study investigates the impact of various instrumentation techniques on material removal and surface changes in titanium (Ti)- and zirconia (Zr) implant discs. Ti- and Zr discs were subjected to standardized experiments using various instruments including airflow, ultrasound, carbide, and diamond burs. Instrumentation was performed for 60 s with continuous automatic motion. Abrasion and changes in surface roughness were assessed using profilometry, while scanning electron microscopy was used to examine morphological changes and particle size. Carbide burs predominantly caused abrasion on Ti discs, while diamond burs caused more abrasion on Zr discs. The Ti discs were more susceptible to surface changes. However, among the materials tested, machined Zr discs treated with diamond burs produced the largest particle. In certain cases, a statistical significance (p < 0.05) was observed between the groups, while in others, there was no considerable difference among the means (p > 0.05). These results highlighted the statistical significance of our findings. These results found diverse alterations in surface characteristics of Ti- and Zr discs due to different instruments, with carbide and diamond burs causing notable effects. The findings highlight the need for a careful balance between promoting healing and minimizing harm during implantoplasty.

In vivo healing of low temperature deproteinized bovine bone xenograft in a rabbit cranial model.

The physicochemical properties of grafting materials affect the quality of the osteointegration, resorption rate, and the new bone (NB) formation. This study assessed the physicochemical properties and integration of a low temperature deproteinized bovine bone xenograft (BBX), referred to as optimized MoaBone® (OMB). This novel BBX was physiochemically characterized both pre and post chemical bleaching and sterilization by gamma irradiation. OMB was compared to two commercial BBX; Bio-Oss® (BO) and MoaBone® (MB) using a rabbit cranial model. Residual graft and NB were quantified using histology and micro-computed tomography. Results showed that chemical treatment and gamma irradiation had limited effect on the surface texture. A significant decrease in the collagen content was detected post chemical treatment and in the carbonate content post gamma irradiation. There was no evidence of inflammatory infiltrate, necrosis, or connective tissue encapsulation, and a significant increase of NB in all grafted sites as compared to untreated defects could be observed. However, there was no statistically significant difference between the grafted sites. We conclude that chemical treatment and terminal sterilization strongly impact the final graft's properties. OMB graft showed equivalence with BO for in vivo bone formation and potentially results in lower levels of graft retention.

LONG-TERM OUTCOMES OF IMPLANT PLACEMENT VERSUS TOOTH PRESERVATION IN PERIODONTALLY COMPROMISED TEETH MAY BE COMPARABLE.

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Sarafidou K, Lazaridi I, Gotsis S, Kirmanidou Y, Vasilaki D, Hirayama H, Michalakis K. Tooth preservation vs. extraction and implant placement in periodontally compromised patients: A systematic review and analysis of studies. J Prosthodont. 2022 Oct;31(8):e87-e99. doi:10.1111/jopr.13560. Epub 2022 Aug 2. PMID: 35794083 SOURCE OF FUNDING: No external funding was received for this research. TYPE OF STUDY/DESIGN: Systematic review (without meta-analysis).

Air powder waterjet technology using erythritol or glycine powders in periodontal or peri-implant prophylaxis and therapy: A consensus report of an expert meeting.

OBJECTIVES: To attain a collective expert opinion on the use of air powder waterjet technology (APWT) with erythritol and glycine powders in the prophylaxis and therapy of periodontal and peri-implant diseases. MATERIAL AND METHODS: In the first step, a modified one-round online Delphi survey including 44 five-point Likert scale questions was conducted among a group of 10 expert clinicians and researchers with thorough knowledge and experience in this topic. In the second step, the single questions and the survey results were discussed during a meeting, and consensus statements were formulated, respectively. RESULTS: An agreement was reached on most items, especially opinions supporting glycine and erythritol powders as favorable with respect to efficiency, safety, and comfort. More scientific evidence is needed to support the improvement in clinical attachment on teeth and implants, especially when APWT with erythritol is used. In addition, APWT needs more long-term evaluation and studies in terms of microbiome/microbiological effects as well as effects on the inflammatory response on natural teeth and implants, also in light of a guided biofilm therapy concept. CONCLUSIONS: In line with the expert opinions and supported by the evidence, it was concluded that the use of APWT with erythritol and glycine powders in nonsurgical periodontal and peri-implant therapy and prophylaxis is patient compliant and efficient.

Bacterial contamination of air and surfaces during dental procedures-An experimental pilot study using Staphylococcus aureus.

OBJECTIVE: The oral cavity contains numerous microorganisms, including antimicrobial-resistant bacteria. These microorganisms can be transmitted via respiratory particles from patients to healthcare providers and vice versa during dental care. We evaluated the spread of Staphylococcus aureus during standardized dental procedures using different scaling devices and rinsing solutions. METHODS: During systematic therapy for dental biofilm removal (guided biofilm therapy), using an airflow or ultrasound device to a model simulation head. Staphylococcus aureus suspension was injected into the mouth of the model to mimic saliva. Different suction devices (conventional saliva ejector or a prototype) and rising solutions (water or chlorhexidine) were used. To assess contamination with S. aureus, an air-sampling device was placed near the oral cavity and samples of surface areas were collected. RESULTS: S. aureus was only detected by air sampling when the conventional saliva ejector with airflow was used. No growth was observed during treatments with the ultrasonic piezo instrument or the prototype suction device. Notably, a rinsing solution of chlorhexidine digluconate decreased the bacterial load compared to water. Surface contamination was rarely detected (1 of 120 samples). CONCLUSIONS: Although our findings indicate potential airborne bacterial transmission during routine prophylactic procedures, specific treatment options during biofilm removal appear to reduce air contamination. These options include ultrasonic piezo devices or the prototype suction device. The use of chlorhexidine reduced the CFU counts of S. aureus detected by air sampling. Surface contamination during dental procedures was a rare occurrence.

Description of a new laboratory evaluation method of interdental brush abrasion as a clinical hazard.

OBJECTIVES: To simulate the abrasive potential of an interdental brush when applied with toothpastes and prophylactic gels/solutions in a novel laboratory brushing simulation set-up. METHODS: A brushing device was customized to treat dentin samples mimicking a simplified interdental space with an interdental brush (ISO 2). The brushing, that is, 7200 strokes for 1 h, was performed with artificial saliva (control), a povidone-iodine solution, and slurries of chlorhexidine and fluoride gels as well as three toothpastes with different RDA values ranging from 29 to 100, respectively. The loss of dentin was profilometrically assessed and compared with ANOVA and Fishers LSD. RESULTS: While artificial saliva as control, the solution and the gel slurries showed no measurable dentin loss, toothpastes resulted in a measurable linear surface damage with respect to the actual intrinsic RDA values and ranged from 12.6 to 26.5 µm (p < 0.001). CONCLUSIONS: Any interdental cleaning product should be tailored and carefully instructed. Any over- and misuse should be avoided, which applies especially to the use of interdental brushes in combination with abrasive toothpastes.

Properties of three collagen scaffolds in comparison with native connective tissue: an in-vitro study.

PURPOSE: To evaluate collagen scaffolds (CS) in terms of their in vitro resorption behavior, surface structure, swelling behavior, and mechanical properties in physiologically simulated environments, compared with porcine native connective tissue. MATERIALS AND METHODS: Three test materials-one porcine collagen matrix (p-CM), two acellular dermal matrices (porcine = p-ADM, allogenic = a-ADM)-and porcine native connective tissue (p-CTG) as a control material were examined for resorption in four solutions using a high-precision scale. The solutions were artificial saliva (AS) and simulated body fluid (SBF), both with and without collagenase (0.5 U/ml at 37 °C). In addition, the surface structures of CS were analyzed using a scanning electron microscope (SEM) before and after exposure to AS or SBF. The swelling behavior of CS was evaluated by measuring volume change and liquid absorption capacity in phosphate-buffered saline (PBS). Finally, the mechanical properties of CS and p-CTG were investigated using cyclic compression testing in PBS. RESULTS: Solutions containing collagenase demonstrated high resorption rates with significant differences (p < 0.04) between the tested materials after 4 h, 8 h and 24 h, ranging from 54.1 to 100% after 24 h. SEM images revealed cross-linked collagen structures in all untreated specimens. Unlike a-ADM, the scaffolds of p-CM and p-ADM displayed a flake-like structure. The swelling ratio and fluid absorption capacity per area ranged from 13.4 to 25.5% among the test materials and showed following pattern: p-CM > a-ADM > p-ADM. P-CM exhibited higher elastic properties than p-ADM, whereas a-ADM, like p-CTG, were barely compressible and lost structural integrity under increasing pressure. CONCLUSIONS AND CLINICAL IMPLICATIONS: Collagen scaffolds vary significantly in their physical properties, such as resorption and swelling behavior and elastic properties, depending on their microstructure and composition. When clinically applied, these differences should be taken into consideration to achieve the desired outcomes.

A conceptual review on reconstructive peri-implantitis therapy: Challenges and opportunities.

OBJECTIVES: The current strategies to reconstruct lost peri-implant tissues due to the disease have been largely unpredictable. The aim of this conceptual review is to discuss relevant biological and biomechanical challenges of applying reconstructive means to treat peri-implantitis. Additionally, opportunities to improve treatment predictability are presented. MATERIAL AND METHODS: A narrative review was conducted to fulfill the aim. RESULTS: The four interrelated negative conditions hampering effective reconstruction are: inferior tissue perfusion, unfavorable bone topography, ineffective surface treatment, and unstable wound. First, peri-implant tissues resemble scars with reduced cellularity and vascularity, coupled with the absence of the periodontal ligament plexuses and the avascular implant and biomaterials, maintaining primary closure is a challenge, which is critical for regeneration. Second, defect morphology and bone topography surrounding implants determine the reconstructive potential. Unfortunately, noncontained defects are frequently encountered, with a combination of suprabony (horizontal bone loss) and infrabony (vertical usually involving circumferential bone loss) defects. Third, current attempts for implant surface decontamination are insufficient due to inaccessible macrostructure and rough surfaces in the micro-scale. Histologic evaluation has shown bacteria aggregation and calcified deposits around implants. Lastly, wound stability is difficult to achieve due to inherent soft tissue biomechanical quality and quantity deficiencies and mobile bone particulates. Opportunities to tackle the abovementioned challenges include the use of novel imaging technologies, such as high-frequency dental ultrasound and laser speckle imaging to evaluate tissue perfusion, soft tissue quality/quantity, and bone topography pre-surgically. The use of the operating microscope could allow better visualization and removal of etiologic factors. Strategies to improve soft tissue quality may include preoperative control of soft tissue inflammation and the potential use of biologics. Methods such as fixation to stabilize the biomaterials could be beneficial. CONCLUSIONS: A more nuanced understanding of the current challenges and opportunities can lead to more effective preoperative and postoperative care protocols, ultimately improving the success rate of reconstructive procedures.

[Direct adhesive reconstructions for restoration of posterior teeth with erosive tooth wear]. / Direkte Restaurationstechnik im Seitenzahnbereich zur Versorgung von erosionsbedingtem Zahnhartsubstanzverlust.

The restorative treatment of dental hard tissue loss, e.g., due to erosion, and the rehabilitation of the original vertical bite dimension confronts the dentist with problems when implementing the therapy. Traditionally, this therapy is conducted with laboratory-fabricated workpieces made of ceramics which usually require a preparation of the remaining tooth substance and also causes high costs for the patient. Therefore, alternative methods should be considered. This article presents the use of direct adhesive composite restorations as a way of reconstructing a dentition severely altered by erosion. To reconstruct the occlusal surfaces, transfer splints are used that are made on the basis of individual wax-up models. The procedure described is a well-researched and proven method for restoring teeth with erosion-related loss of hard tooth substance. As with all new procedures, there will be a certain learning curve for the practical dentist after which high-quality restorations can be implemented with this technique.

Efficient cleaning of a macro-structured micro-rough dental implant shoulder with a new coronal vertical groove design: A technical note.

This evaluation assessed the influence of a new implant shoulder design on cleanability using a now established in-vitro study model. Eight test (Botticelli, Di Meliora AG, Basel, Switzerland) and eight control implants (T3 Osseotite, ZimVie, Winterthur, Switzerland), were embedded in standardized defects in simulated bone. The implant surfaces were painted to be visually distinguishable and debrided with ultrasonic instruments (US) and an air powder waterjet device (AIR). Uncleaned implants served as positive controls. After the standardized cleaning, the implants were photographed and divided into three zones (upper marginal shoulder zone (A); lower marginal shoulder zone (B); fully threaded sub-shoulder zone (C)), and analyzed with an image processing software. On test implants, AIR was almost 100% efficacious compared to 80-90% with US, in both upper zones (A/B). In control implants, results of both AIR and US were almost 100% in zone A, but only 55-75% in zone B. In both implants, AIR showed statistically significant higher efficacy than US (P<0.05). Within the limitations of the present in-vitro model, a new macro-structured micro-rough dental implant shoulder with a new coronal vertical groove design shows similar cleanability in comparison to a smooth and machined surface.