Video-based learning of coping strategies for common errors improves laparoscopy training-a randomized study.

AIMS: The aim of this study was to investigate whether shifting the focus to solution orientation and developing coping strategies for common errors could increase the efficiency of laparoscopic training and influence learning motivation. The concept of coping has been particularly defined by the psychologist Richard Lazarus [Lazarus and Folkman in Stress, appraisal, and coping, Springer publishing company, New York, 1984]. Based on this model, we examined the use of observational learning with a coping model for its effectiveness as a basic teaching model in laparoscopic training. METHODS: 55 laparoscopically naive medical students learned a standardized laparoscopic knot tying technique with video-based instructions. The control group was only offered a mastery video that showed the ideal technique and was free from mistakes. The intervention group was instructed on active error analysis and watched freely selectable videos of common errors including solution strategies (coping model) in addition to the mastery videos. RESULTS: There was no statistically significant difference between the intervention and control groups for number of knot tying attempts until proficiency was reached (18.8 ± 5.5 vs. 21.3 ± 6.5, p = 0.142). However, there was a significantly higher fraction of knots achieving technical proficiency in the intervention group after first use of the coping model (0.7 ± 0.1 vs. 0.6 ± 0.2, p = 0.026). Additionally, the proportion of blinded attempts that met the criteria for technical proficiency was significantly higher for the intervention group at 60.9% vs. 38.0% in control group (p = 0.021). The motivational subscore "interest" of the validated score on current motivation (QCM) was significantly higher for the intervention group (p = 0.032), as well as subjective learning benefit (p = 0.002) and error awareness (p < 0.001). CONCLUSION: Using video-based learning of coping strategies for common errors improves learning motivation and understanding of the technique with a significant difference in its qualitative implementation in laparoscopy training. The ability to think in a solution-oriented, independent way is necessary in surgery in order to recognize and adequately deal with technical difficulties and complications.

Serious gaming and virtual reality in the multimodal training of laparoscopic inguinal hernia repair: a randomized crossover study.

BACKGROUND: The aim of this study was to assess the transferability of surgical skills for the laparoscopic hernia module between the serious game Touch Surgery™ (TS) and the virtual reality (VR) trainer Lap Mentor™. Furthermore, this study aimed to collect validity evidence and to discuss "sources of validity evidence" for the findings using the laparoscopic inguinal hernia module on TS. METHODS: In a randomized crossover study, medical students (n = 40) in their clinical years performed laparoscopic inguinal hernia modules on TS and the VR trainer. TS group started with "Laparoscopic Inguinal Hernia Module" on TS (phase 1: Preparation, phase 2: Port Placement and Hernia Repair), performed the module first in training, then in test mode until proficiency was reached. VR group started with "Inguinal Hernia Module" on the VR trainer (task 1: Anatomy Identification, task 2: Incision and Dissection) and also performed the module until proficiency. Once proficiency reached in the first modality, the groups performed the other training modality until reaching proficiency. Primary endpoint was the number of attempts needed to achieve proficiency for each group for each task/phase. RESULTS: Students starting with TS needed significantly less attempts to reach proficiency for task 1 on the VR trainer than students who started with the VR trainer (TS = 2.7 ± 0.6 vs. VR = 3.2 ± 0.7; p = 0.028). No significant differences for task 2 were observed between groups (TS = 2.3 ± 1.1 vs. VR = 2.1 ± 0.8; p = 0.524). For both phases on TS, no significant skill transfer from the VR trainer to TS was observed. Aspects of validity evidence for the module on TS were collected. CONCLUSION: The results show that TS brought additional benefit to improve performances on the VR trainer for task 1 but not for task 2. Skill transfer from the VR trainer to TS could not be shown. VR and TS should thus be used in combination with TS first in multimodal training to ensure optimal training conditions.

Telestration with augmented reality for visual presentation of intraoperative target structures in minimally invasive surgery: a randomized controlled study.

AIMS: In minimally invasive surgery (MIS), intraoperative guidance has been limited to verbal communication without direct visual guidance. Communication issues and mistaken instructions in training procedures can hinder correct identification of anatomical structures on the MIS screen. The iSurgeon system was developed to provide visual guidance in the operating room by telestration with augmented reality (AR). METHODS: Laparoscopic novices (n = 60) were randomized in two groups in a cross-over design: group 1 trained only with verbal guidance first and then with additional telestration with AR on the operative screen and vice versa for group 2. Training consisted of laparoscopic basic training and subsequently a specifically designed training course, including a porcine laparoscopic cholecystectomy (LC). Outcome included time needed for training, performance with Global Operative Assessment of Laparoscopic Skills (GOALS), and Objective Structured Assessment of Technical Skills (OSATS) score for LC, complications, and subjective workload (NASA-TLX questionnaire). RESULTS: Telestration with AR led to significantly faster total training time (1163 ± 275 vs. 1658 ± 375 s, p < 0.001) and reduced error rates. LC on a porcine liver was performed significantly better (GOALS 21 ± 5 vs. 18 ± 4, p < 0.007 and OSATS 67 ± 11 vs. 61 ± 8, p < 0.015) and with less complications (13.3% vs. 40%, p < 0.020) with AR. Subjective workload and stress were significantly reduced during training with AR (33.6 ± 12.0 vs. 30.6 ± 12.9, p < 0.022). CONCLUSION: Telestration with AR improves training success and safety in MIS. The next step will be the clinical application of telestration with AR and the development of a mobile version for remote guidance.

Virtual reality simulation in robot-assisted surgery: meta-analysis of skill transfer and predictability of skill.

BACKGROUND: The value of virtual reality (VR) simulators for robot-assisted surgery (RAS) for skill assessment and training of surgeons has not been established. This systematic review and meta-analysis aimed to identify evidence on transferability of surgical skills acquired on robotic VR simulators to the operating room and the predictive value of robotic VR simulator performance for intraoperative performance. METHODS: MEDLINE, Cochrane Central Register of Controlled Trials, and Web of Science were searched systematically. Risk of bias was assessed using the Medical Education Research Study Quality Instrument and the Newcastle-Ottawa Scale for Education. Correlation coefficients were chosen as effect measure and pooled using the inverse-variance weighting approach. A random-effects model was applied to estimate the summary effect. RESULTS: A total of 14 131 potential articles were identified; there were eight studies eligible for qualitative and three for quantitative analysis. Three of four studies demonstrated transfer of surgical skills from robotic VR simulators to the operating room measured by time and technical surgical performance. Two of three studies found significant positive correlations between robotic VR simulator performance and intraoperative technical surgical performance; quantitative analysis revealed a positive combined correlation (r = 0.67, 95 per cent c.i. 0.22 to 0.88). CONCLUSION: Technical surgical skills acquired through robotic VR simulator training can be transferred to the operating room, and operating room performance seems to be predictable by robotic VR simulator performance. VR training can therefore be justified before operating on patients.

Functional outcomes after laparoscopic versus robotic-assisted rectal resection: a systematic review and meta-analysis.

Surgical resection is crucial for curative treatment of rectal cancer. Through multidisciplinary treatment, including radiochemotherapy and total mesorectal excision, survival has improved substantially. Consequently, more patients have to deal with side effects of treatment. The most recently introduced surgical technique is robotic-assisted surgery (RAS) which seems equally effective in terms of oncological control compared to laparoscopy. However, RAS enables further advantages which maximize the precision of surgery, thus providing better functional outcomes such as sexual function or contience without compromising oncological results. This review was done according to the PRISMA and AMSTAR-II guidelines and registered with PROSPERO (CRD42018104519). The search was planned with PICO criteria and conducted on Medline, Web of Science and CENTRAL. All screening steps were performed by two independent reviewers. Inclusion criteria were original, comparative studies for laparoscopy vs. RAS for rectal cancer and reporting of functional outcomes. Quality was assessed with the Newcastle-Ottawa scale. The search retrieved 9703 hits, of which 51 studies with 24,319 patients were included. There was a lower rate of urinary retention (non-RCTs: Odds ratio (OR) [95% Confidence Interval (CI)] 0.65 [0.46, 0.92]; RCTs: OR[CI] 1.29[0.08, 21.47]), ileus (non-RCTs: OR[CI] 0.86[0.75, 0.98]; RCTs: OR[CI] 0.80[0.33, 1.93]), less urinary symptoms (non-RCTs mean difference (MD) [CI] - 0.60 [- 1.17, - 0.03]; RCTs: - 1.37 [- 4.18, 1.44]), and higher quality of life for RAS (only non-RCTs: MD[CI]: 2.99 [2.02, 3.95]). No significant differences were found for sexual function (non-RCTs: standardized MD[CI]: 0.46[- 0.13, 1.04]; RCTs: SMD[CI]: 0.09[- 0.14, 0.31]). The current meta-analysis suggests potential benefits for RAS over laparoscopy in terms of functional outcomes after rectal cancer resection. The current evidence is limited due to non-randomized controlled trials and reporting of functional outcomes as secondary endpoints.

Endoscopic versus surgical treatment for infected necrotizing pancreatitis: a systematic review and meta-analysis of randomized controlled trials.

OBJECTIVE: To compare outcomes of endoscopic and surgical treatment for infected necrotizing pancreatitis (INP) based on results of randomized controlled trials (RCT). BACKGROUND: Treatment of INP has changed in the last two decades with adoption of interventional, endoscopic and minimally invasive surgical procedures for drainage and necrosectomy. However, this relies mostly on observational studies. METHODS: We performed a systematic review following Cochrane and PRISMA guidelines and AMSTAR-2 criteria and searched CENTRAL, Medline and Web of Science. Randomized controlled trails that compared an endoscopic treatment to a surgical treatment for patients with infected walled-off necrosis and included one of the main outcomes were eligible for inclusion. The main outcomes were mortality and new onset multiple organ failure. Prospero registration ID: CRD42019126033 RESULTS: Three RCTs with 190 patients were included. Intention to treat analysis showed no difference in mortality. However, patients in the endoscopic group had statistically significant lower odds of experiencing new onset multiple organ failure (odds ratio (OR) confidence interval [CI] 0.31 [0.10, 0.98]) and were statistically less likely to suffer from perforations of visceral organs or enterocutaneous fistulae (OR [CI] 0.31 [0.10, 0.93]), and pancreatic fistulae (OR [CI] 0.09 [0.03, 0.28]). Patients with endoscopic treatment had a statistically significant lower mean hospital stay (Mean difference [CI] - 7.86 days [- 14.49, - 1.22]). No differences in bleeding requiring intervention, incisional hernia, exocrine or endocrine insufficiency or ICU stay were apparent. Overall certainty of evidence was moderate. CONCLUSION: There seem to be possible benefits of endoscopic treatment procedure. Given the heterogenous procedures in the surgical group as well as the low amount of randomized evidence, further studies are needed to evaluate the combination of different approaches and appropriate timepoints for interventions.

Learning Curves of Laparoscopic Roux-en-Y Gastric Bypass and Sleeve Gastrectomy in Bariatric Surgery: a Systematic Review and Introduction of a Standardization.

BACKGROUND: The most commonly performed bariatric procedures are laparoscopic Roux-en-Y gastric bypass (RYGB) and sleeve gastrectomy (LSG). Impact of learning curves on operative outcome has been well shown, but the necessary learning curves have not been clearly defined. This study provides a systematic review of the literature and proposes a standardization of phases of learning curves for RYGB and LSG. METHODS: A systematic literature search was performed using PubMed, Web of Science, and CENTRAL databases. All studies specifying a number or range of approaches to characterize the learning curve for RYGB and LSG were selected. RESULTS: A total of 28 publications related to learning curves for 27,770 performed bariatric surgeries were included. Parameters used to determine the learning curve were operative time, complications, conversions, length of stay, and blood loss. Learning curve range was 30-500 (RYGB) and 30-200 operations (LSG) according to different definitions and respective phases of learning curves. Learning phases described the number of procedures necessary to achieve predefined skill levels, such as competency, proficiency, and mastery. CONCLUSIONS: Definitions of learning curves for bariatric surgery are heterogeneous. Introduction of the three skill phases competency, proficiency, and mastery is proposed to provide a standardized definition using multiple outcome variables to enable better comparison in the future. These levels are reached after 30-70, 70-150, and up to 500 RYGB, and after 30-50, 60-100, and 100-200 LSG. Training curricula, previous laparoscopic experience, and high procedure volume are hallmarks for successful outcomes during the learning curve.

Regulation of transpirational water loss in Quercus suber trees in a Mediterranean-type ecosystem.

Sap flux density in branches, leaf transpiration, stomatal conductance and leaf water potentials were measured in 16-year-old Quercus suber L. trees growing in a plantation in southern Portugal to understand how evergreen Mediterranean trees regulate water loss during summer drought. Leaf specific hydraulic conductance and leaf gas exchange were monitored during the progressive summer drought to establish how changes along the hydraulic pathway influence shoot responses. As soil water became limiting, leaf water potential, stomatal conductance and leaf transpiration declined significantly. Predawn leaf water potential reflected soil water potential measured at 1-m depth in the rhizospheres of most trees. The lowest predawn leaf water potential recorded during this period was -1.8 MPa. Mean maximum stomatal conductance declined from 300 to 50 mmol m(-2) s(-1), reducing transpiration from 6 to 2 mmol m(-2) s(-1). Changes in leaf gas exchange were attributed to reduced soil water availability, increased resistances along the hydraulic pathway and, hence, reduced leaf water supply. There was a strong coupling between changes in soil water content and stomatal conductance as well as between stomatal conductance and leaf specific hydraulic conductance. Despite significant seasonal differences among trees in predawn leaf water potential, stomatal conductance, leaf transpiration and leaf specific hydraulic conductance, there were no differences in midday leaf water potentials. The strong regulation of changes in leaf water potential in Q. suber both diurnally and seasonally is achieved through stomatal closure, which is sensitive to changes in both liquid and vapor phase conductance. This sensitivity allows for optimization of carbon and water resource use without compromising the root-shoot hydraulic link.

Element partitioning: the role of melt structure and composition.

We segregated coexisting gabbroic and granitic melts by centrifuging them at high pressures and temperatures and measured the trace element compositions of the melts by laser ablation inductively coupled plasma mass spectrometry. Our results demonstrate that the effect of melt structure contributes about one order of magnitude to crystal/melt partition coefficients. Partitioning of alkali and alkaline earth elements strongly depends on field strength: Amphoteric and lone pair electron elements partition into the polymerized granitic melt; and rare earth, transition, and high field strength elements coordinated by nonbridging oxygens partition remarkably similar into the gabbroic melt. A regular solution model predicts these effects.

Physiological and morphological responses to water stress in two Acacia species from contrasting habitats.

Container-grown seedlings of Acacia tortilis Forsk. Hayne and A. xanthophloea Benth. were watered either every other day (well watered) or every 7 days (water-stressed) for 1 year in a greenhouse. Total plant dry mass (T(dm)), carbon allocation and water relations were measured monthly. Differences in leaf area (LA) accounted for differences in T(dm) between the species, and between well-watered and water-stressed plants. Reduction in LA as a result of water stress was attributed to reduced leaf initiation, leaf growth rate and leaf size. When subjected to prolonged water stress, Acacia xanthophloea wilted more rapidly than A. tortilis and, unlike A. tortilis, lost both leaves and branches. These differences between species were attributed to differences in the allocation of carbon between leaves and roots and in the ability to adjust osmotically. Rapid recovery in A. xanthophloea following the prolonged water-stress treatment was attributed to high cell wall elasticity. Previous exposure to water stress contributed to water-stress resistance and improved recovery after stress.

Molecule intrinsic minimal basis sets. I. Exact resolution of ab initio optimized molecular orbitals in terms of deformed atomic minimal-basis orbitals.

A method is presented for expressing the occupied self-consistent-field (SCF) orbitals of a molecule exactly in terms of chemically deformed atomic minimal-basis-set orbitals that deviate as little as possible from free-atom SCF minimal-basis orbitals. The molecular orbitals referred to are the exact SCF orbitals, the free-atom orbitals referred to are the exact atomic SCF orbitals, and the formulation of the deformed "quasiatomic minimal-basis-sets" is independent of the calculational atomic orbital basis used. The resulting resolution of molecular orbitals in terms of quasiatomic minimal basis set orbitals is therefore intrinsic to the exact molecular wave functions. The deformations are analyzed in terms of interatomic contributions. The Mulliken population analysis is formulated in terms of the quasiatomic minimal-basis orbitals. In the virtual SCF orbital space the method leads to a quantitative ab initio formulation of the qualitative model of virtual valence orbitals, which are useful for calculating electron correlation and the interpretation of reactions. The method is applicable to Kohn-Sham density functional theory orbitals and is easily generalized to valence MCSCF orbitals.

Molecule intrinsic minimal basis sets. II. Bonding analyses for Si4H6 and Si2 to Si10.

The method, introduced in the preceding paper, for recasting molecular self-consistent field (SCF) or density functional theory (DFT) orbitals in terms of intrinsic minimal bases of quasiatomic orbitals, which differ only little from the optimal free-atom minimal-basis orbitals, is used to elucidate the bonding in several silicon clusters. The applications show that the quasiatomic orbitals deviate from the minimal-basis SCF orbitals of the free atoms by only very small deformations and that the latter arise mainly from bonded neighbor atoms. The Mulliken population analysis in terms of the quasiatomic minimal-basis orbitals leads to a quantum mechanical interpretation of small-ring strain in terms of antibonding encroachments of localized molecular-orbitals and identifies the origin of the bond-stretch isomerization in Si4H6. In the virtual SCF/DFT orbital space, the method places the qualitative notion of virtual valence orbitals on a firm basis and provides an unambiguous ab initio identification of the frontier orbitals.

Foot force direction in an isometric pushing task: prediction by kinematic and musculoskeletal models.

The abilities of a kinematic model and a muscle model of the human lower limb to predict the stereotyped direction of the muscular component of foot force produced by seated subjects in a static task were tested and compared. Human subjects ( n=11) performed a quasi-static, lower-limb pushing task against an instrumented bicycle pedal, free to rotate about its own axis, but with the crank fixed. Each pushing trial consisted of applying a force from the resting level to a force magnitude target with the right foot. Ten force target magnitudes were used (200, 250, ..., 650 N) along with 12 pedal positions. For each pushing effort, the muscular contribution to the measured foot force was determined from push onset to peak attained force. This segment was well characterized by a straight line across subjects, pedal positions, and force target magnitudes. The linear nature of the muscular component allowed a characteristic direction to be determined for each trial. A three-joint (hip, knee, and ankle) and a two-joint (hip and knee) net joint torque optimization was applied to a sagittal-plane kinematic model to predict the characteristic force direction. A musculoskeletal model was also used to create a feasible force space (FFS) for the lower limb. This FFS represents the range of possible forces the lower limb could theoretically produce. From this FFS, the direction of the maximum feasible foot force was determined and compared with the characteristic direction of subject performance. The muscle model proved to be the most effective in predicting subject force direction, followed by the three-joint and two-joint net joint torques optimizations. Similarities between the predictions of the kinematic and muscle model were also found.

The construction and interpretation of MCSCF wavefunctions.

The multiconfiguration self-consistent field (MCSCF) method offers the most general approach to the computation of chemical reactions and multiple electronic states. This review discusses the design of MCSCF wavefunctions for treating these problems and the interpretation of the resulting orbitals and configurations. In particular, localized orbitals are convenient both for selection of the appropriate active space and for understanding the computed results. The computational procedures for optimizing these wavefunctions and the techniques for recovery of dynamical correlation energy are reviewed.