Orientation and stability of a bi-functional aromatic organic molecular adsorbate on silicon.

In this work we combine scanning tunneling microscopy, near-edge X-ray absorption fine structure spectroscopy, X-ray photoemission spectroscopy and density functional theory to resolve a long-standing confusion regarding the adsorption behaviour of benzonitrile on Si(001) at room temperature. We find that a trough-bridging structure is sufficient to explain adsorption at low coverages. At higher coverages when steric hindrance prevents the phenyl ring lying flat on the surface, the 2+2 cycloaddition structure dominates.

Reaction paths of phosphine dissociation on silicon (001).

Using density functional theory and guided by extensive scanning tunneling microscopy (STM) image data, we formulate a detailed mechanism for the dissociation of phosphine (PH3) molecules on the Si(001) surface at room temperature. We distinguish between a main sequence of dissociation that involves PH2+H, PH+2H, and P+3H as observable intermediates, and a secondary sequence that gives rise to PH+H, P+2H, and isolated phosphorus adatoms. The latter sequence arises because PH2 fragments are surprisingly mobile on Si(001) and can diffuse away from the third hydrogen atom that makes up the PH3 stoichiometry. Our calculated activation energies describe the competition between diffusion and dissociation pathways and hence provide a comprehensive model for the numerous adsorbate species observed in STM experiments.

Ba termination of Ge(001) studied with STM.

We use controlled annealing to tune the interfacial properties of a sub-monolayer and monolayer coverages of Ba atoms deposited on Ge(001), enabling the generation of either of two fundamentally distinct interfacial phases, as revealed by scanning tunneling microscopy. Firstly we identify the two key structural phases associated with this adsorption system, namely on-top adsorption and surface alloy formation, by performing a deposition and annealing experiment at a coverage low enough (∼0.15 ML) that isolated Ba-related features can be individually resolved. Subsequently we investigate the monolayer coverage case, of interest for passivation schemes of future Ge based devices, for which we find that the thermal evaporation of Ba onto a Ge(001) surface at room temperature results in on-top adsorption. This separation (lack of intermixing) between Ba and Ge layers is retained through successive annealing steps to temperatures of 470, 570, 670 and 770 K although a gradual ordering of the Ba layer is observed at 570 K and above, accompanied by a decrease in Ba layer density. Annealing above 770 K produces the 2D surface alloy phase accompanied by strain relief through monolayer height trench formation. An annealing temperature of 1070 K sees a further change in surface morphology but retention of the 2D surface alloy characteristic. These results are discussed in view of their possible implications for future semiconductor integrated circuit technology.

Quantum engineering at the silicon surface using dangling bonds.

Individual atoms and ions are now routinely manipulated using scanning tunnelling microscopes or electromagnetic traps for the creation and control of artificial quantum states. For applications such as quantum information processing, the ability to introduce multiple atomic-scale defects deterministically in a semiconductor is highly desirable. Here we use a scanning tunnelling microscope to fabricate interacting chains of dangling bond defects on the hydrogen-passivated silicon (001) surface. We image both the ground-state and the excited-state probability distributions of the resulting artificial molecular orbitals, using the scanning tunnelling microscope tip bias and tip-sample separation as gates to control which states contribute to the image. Our results demonstrate that atomically precise quantum states can be fabricated on silicon, and suggest a general model of quantum-state fabrication using other chemically passivated semiconductor surfaces where single-atom depassivation can be achieved using scanning tunnelling microscopy.

Charge density waves in the graphene sheets of the superconductor CaC(6).

Graphitic systems have an electronic structure that can be readily manipulated through electrostatic or chemical doping, resulting in a rich variety of electronic ground states. Here we report the first observation and characterization of electronic stripes in the highly electron-doped graphitic superconductor, CaC(6), by scanning tunnelling microscopy and spectroscopy. The stripes correspond to a charge density wave with a period three times that of the Ca superlattice. Although the positions of the Ca intercalants are modulated, no displacements of the carbon lattice are detected, indicating that the graphene sheets host the ideal charge density wave. This provides an exceptionally simple material-graphene-as a starting point for understanding the relation between stripes and superconductivity. Furthermore, our experiments suggest a strategy to search for superconductivity in graphene, namely in the vicinity of striped 'Wigner crystal' phases, where some of the electrons crystallize to form a superlattice.

Electronic effects of single H atoms on Ge(001) revisited.

The adsorption of isolated H atoms on the Ge(001) surface is studied using density functional theory (DFT) and scanning tunneling microscopy (STM). Two stable adsorption positions that are found in DFT correspond to H atom attachment to an up-or down-buckled Ge dimer atom, respectively. Surprisingly, in the case where H bonds to the down-buckled Ge atom, we find that there is a redistribution of a unit of charge which leaves the net charge of the doubly occupied dangling bond of the unreacted Ge atom intact. This configuration is found to be the more stable of the two structures. Comparison to filled- and empty-state STM images confirms that this lowest energy structure is observed at room temperature. These results represent a fundamentally different picture of the physics and chemistry of H adsorption to Ge(001) compared with previous work.

Electronic effects induced by single hydrogen atoms on the Ge(001) surface.

The properties of an isolated dangling bond formed by the chemisorption of a single hydrogen atom on a dimer of the Ge(001) surface are investigated by first-principles density functional theory (DFT) calculations, and scanning tunneling microscopy (STM) measurements. Two stable atomic configurations of the Ge-Ge-H hemihydride with respect to the neighboring bare Ge-Ge dimers are predicted by DFT. For both configurations, the unpaired electron of the HGe(001) system is found to be delocalized over the surface, rendering the isolated dangling bond of the hemihydride unoccupied. However, local surface charge accumulation, such as may occur during STM imaging, leads to the localization of two electrons onto the hemihydride dangling bond. The calculated surface densities of states for one of the charged Ge-Ge-H hemihydride configurations are found to be in good agreement with atomic-resolution STM measurements on n-type Ge(001). Comparison with a Si-Si-H hemihydride of the Si(001) surface shows similarities in structural properties, but substantial differences in electronic properties.

Valence surface electronic states on Ge(001).

The optical, electrical, and chemical properties of semiconductor surfaces are largely determined by their electronic states close to the Fermi level (E{F}). We use scanning tunneling microscopy and density functional theory to clarify the fundamental nature of the ground state Ge(001) electronic structure near E{F}, and resolve previously contradictory photoemission and tunneling spectroscopy data. The highest energy occupied surface states were found to be exclusively back bond states, in contrast to the Si(001) surface, where dangling bond states also lie at the top of the valence band.

Single P and As dopants in the Si(001) surface.

Using first-principles density functional theory, we discuss doping of the Si(001) surface by a single substitutional phosphorus or arsenic atom. We show that there are two competing atomic structures for isolated Si-P and Si-As heterodimers, and that the donor electron is delocalized over the surface. We also show that the Si atom dangling bond of one of these heterodimer structures can be progressively charged by additional electrons. It is predicted that surface charge accumulation as a result of tip-induced band bending leads to structural and electronic changes of the Si-P and Si-As heterodimers which could be observed experimentally. Scanning tunneling microscopy (STM) measurements of the Si-P heterodimer on a n-type Si(001) surface reveal structural characteristics and a bias-voltage dependent appearance, consistent with these predictions. STM measurements for the As:Si(001) system are predicted to exhibit similar behavior to P:Si(001).

Phosphine dissociation on the Si(001) surface.

Density functional calculations are performed to identify features observed in STM experiments after phosphine (PH3) dosing of the Si(001) surface. On the basis of a comprehensive survey of possible structures, energetics, and simulated STM images, three prominent STM features are assigned to structures containing surface bound PH2, PH, and P, respectively. Collectively, the assigned features outline for the first time a detailed mechanism of PH3 dissociation and P incorporation on Si(001).

Atomically precise placement of single dopants in si.

We demonstrate the controlled incorporation of P dopant atoms in Si(001), presenting a new path toward the creation of atomic-scale electronic devices. We present a detailed study of the interaction of PH3 with Si(001) and show that it is possible to thermally incorporate P atoms into Si(001) below the H-desorption temperature. Control over the precise spatial location at which P atoms are incorporated was achieved using STM H lithography. We demonstrate the positioning of single P atoms in Si with approximately 1 nm accuracy and the creation of nanometer wide lines of incorporated P atoms.

Progress in silicon-based quantum computing.

We review progress at the Australian Centre for Quantum Computer Technology towards the fabrication and demonstration of spin qubits and charge qubits based on phosphorus donor atoms embedded in intrinsic silicon. Fabrication is being pursued via two complementary pathways: a 'top-down' approach for near-term production of few-qubit demonstration devices and a 'bottom-up' approach for large-scale qubit arrays with sub-nanometre precision. The 'top-down' approach employs a low-energy (keV) ion beam to implant the phosphorus atoms. Single-atom control during implantation is achieved by monitoring on-chip detector electrodes, integrated within the device structure. In contrast, the 'bottom-up' approach uses scanning tunnelling microscope lithography and epitaxial silicon overgrowth to construct devices at an atomic scale. In both cases, surface electrodes control the qubit using voltage pulses, and dual single-electron transistors operating near the quantum limit provide fast read-out with spurious-signal rejection.

Safety of chemonucleolysis. Adverse effects reported in the United States, 1982-1991.

This survey covers 121 "serious" and "unexpected" adverse events after treatment with chymodiactin (chymopapain for injection) among approximately 135,000 patients in the United States. They were reported to the Food and Drug Administration (FDA) within 15 days of notification of the manufacturer between 1982 and the end of 1991. They included fatal anaphylaxis (seven cases), infections (24 cases), hemorrhage (32 cases), and neurologic (32 cases) and miscellaneous (15 cases) events, with a mortality rate of 0.019%. Anaphylactic reactions reported in a postmarketing survey can be attributed to chymopapain itself and infections to lack of asepsis during its administration. The causes of other adverse reactions cannot be as clearly defined, but many are unlikely to have been due to chymopapain or its administration. More careful selection of patients and closer attention to technique during chemonucleolysis have dramatically reduced the incidence of these adverse events, which occur far less frequently than after diskectomy.