Contemporaneous cell spreading and phagocytosis: magneto-resistive real-time monitoring of membrane competing processes.

Adhesion and spreading of cells strongly depend on the properties of the underlying surface, which has significant consequences in long-term cell behavior adaption. This relationship is important for the understanding of both biological functions and their bioactivity in disease-related applications. Employing our magnetic lab-on-a-chip system, we present magnetoresistive-based real-time and label-free detection of cellular phagocytosis behavior during their spreading process on particle-immobilized sensor surfaces. Cell spreading experiments carried out on particle-free and particle-modified surfaces reveal a delay in spreading rate after an elapsed time of about 2.2h for particle-modified surfaces due to contemporaneous cell membrane loss by particle phagocytosis. Our associated magnetoresistive measurements show a high uptake rate at early stages of cell spreading, which decreases steadily until it reaches saturation after an average elapsed time of about 100 min. The corresponding cellular average uptake rate during the entire cell spreading process accounts for three particles per minute. This result represents a four times higher phagocytosis efficiency compared to uptake experiments carried out for confluently grown cells, in which case cell spreading is already finished and, thus, excluded. Furthermore, other dynamic cell-surface interactions at nano-scale level such as cell migration or the dynamics of cell attachment and detachment are also addressable by our magnetic lab-on-a-chip approach.

Magnetoresistive-based real-time cell phagocytosis monitoring.

The uptake of large particles by cells (phagocytosis) is an important factor in cell biology and also plays a major role in biomedical applications. So far, most methods for determining the phagocytic properties rely on cell-culture incubation and end-point detection schemes. Here, we present a lab-on-a-chip system for real-time monitoring of magnetic particle uptake by human fibroblast (NHDF) cells. It is based on recording the time evolution of the average position and distribution of magnetic particles during phagocytosis by giant-magnetoresistive (GMR) type sensors. We employ particles with a mean diameter of 1.2 µm and characterize their phagocytosis-relevant properties. Our experiments at physiological conditions reveal a cellular uptake rate of 45 particles per hour and show that phagocytosis reaches saturation after an average uptake time of 27.7h. Moreover, reference phagocytosis experiments at 4°C are carried out to mimic environmental or disease related inhibition of the phagocytic behavior, and our measurements clearly show that we are able to distinguish between cell-membrane adherent and phagocytosed magnetic particles. Besides the demonstrated real-time monitoring of phagocytosis mechanisms, additional nano-biointerface studies can be realized, including on-chip cell adhesion/spreading as well as cell migration, attachment and detachment dynamics. This versatility shows the potential of our approach for providing a multifunctional platform for on-chip cell analysis.

Artificial cilia of magnetically tagged polymer nanowires for biomimetic mechanosensing.

Polymeric nanowires of polypyrrole have been implemented as artificial cilia on giant-magneto-resistive multilayer sensors for a biomimetic sensing approach. The arrays were tagged with a magnetic material, the stray field of which changes relative to the underlying sensor as a consequence of mechanical stimuli which are delivered by a piezoactuator. The principle resembles balance sensing in mammals. Measurements of the sensor output voltage suggest a proof of concept at frequencies of around 190 kHz and a tag thickness of ∼300 nm. Characterization was performed by scanning electron microscopy and magnetic force microscopy. Micromagnetic and finite-element simulations were conducted to assess basic sensing aspects.

Magnetic particles as markers and carriers of biomolecules.

The detection and manipulation of biomolecules on a common platform is of considerable interest not only for application in devices such as diagnostic tools but also for basic research in biological and medical systems. A promising approach is the utilisation of magnetic particles as markers and carriers for biomolecules. The principle functionality of this approach is demonstrated by the authors. Magnetic particles used as markers can be detected by highly sensitive magnetoresistive sensors resulting in a purely electronic signal. A direct comparison with the standard fluorescence method reveals the advantages of using the magnetic particles. In addition, magnetic particles used as carriers can be manipulated on-chip via currents running through especially designed line patterns. Some current drawbacks and future aspects are discussed. The combination of sensing and manipulating magnetic particles is a promising choice for future integrated lab-on-a-chip systems.

Detection and manipulation of biomolecules by magnetic carriers.

The detection and manipulation of single molecules on a common platform would be of great interest for basic research of biological or chemical systems. A promising approach is the application of magnetic carriers. The principles are demonstrated in this contribution. It is shown that paramagnetic beads can be detected by highly sensitive magnetoresistive sensors yielding a purely electronic signal. Different configurations are discussed. The capability of the sensors to detect even single markers is demonstrated by a model experiment. In addition, the paramagnetic beads can be used as carriers for biomolecules. They can be manipulated on-chip via currents running through specially designed line patterns. Thus, magnetic markers in combination with magnetoresistive sensors are a promising choice for future integrated lab-on-a-chip systems.

Analysing a magnetic molecule detection system--computer simulation.

The detection of single molecules, e.g. in biology is possible by marking the interesting molecules with magnetic beads and detect the influence of the beads on giant magnetoresistance (GMR)/tunnel magnetoresistance (TMR)/spin valve (SV) sensors. The development of suitable multilayers has been studied experimentally as well as theoretically in order to optimize the sensor parameters. A finite difference (FD) method including the usually used contributions to the total energy [exchange, antiferromagnetically (af) coupling, anisotropy and magnetostatic] is used for the simulation with additional contributions to the local field according to the stray fields of the beads. In this work, we will show the results of micromagnetic calculations of the magnetization behavior of GMR/TMR sensors considering also the interaction between the domains in the magnetic layers of the sensor and the bead area. We can present first calculations where the bead particles (signal source) and the magnetic layers (sensor device) are considered as a whole magnetic ensemble.

Comparison of a prototype magnetoresistive biosensor to standard fluorescent DNA detection.

We present a comparative analysis of a magnetoresistive biosensor to standard fluorescent DNA detection. The biosensor consists of giant magnetoresistive (GMR) type Cu/Ni(80)Fe(20) multilayers in the second antiferromagnetic coupling maximum. Each of the 206 elements of the magnetoresistive biosensor is patterned into a spiral-shaped line that can cover the area of a typical DNA spot (70 microm diameter). The probe DNA is assembled on top of the sensor elements in different concentrations ranging from 16 pg/microl to 10 ng/microl. Complementary biotin-labeled analyte DNA is hybridized to the probe DNA at a concentration of 10 ng/microl. A number of different commercially available magnetic microspheres are investigated to determine the most appropriate markers. The experimental comparison shows that the relative sensitivity of the magnetoresistive biosensor is superior to the fluorescent detection at low probe DNA concentrations.

Ultrahigh-density nanowire arrays grown in self-assembled diblock copolymer templates.

We show a simple, robust, chemical route to the fabrication of ultrahigh-density arrays of nanopores with high aspect ratios using the equilibrium self-assembled morphology of asymmetric diblock copolymers. The dimensions and lateral density of the array are determined by segmental interactions and the copolymer molecular weight. Through direct current electrodeposition, we fabricated vertical arrays of nanowires with densities in excess of 1.9 x 10(11) wires per square centimeter. We found markedly enhanced coercivities with ferromagnetic cobalt nanowires that point toward a route to ultrahigh-density storage media. The copolymer approach described is practical, parallel, compatible with current lithographic processes, and amenable to multilayered device fabrication.