2022 National Occupational Injury Research Symposium (NOIRS): Preventing workplace injuries in a changing world.

About NOIRS: The National Occupational Injury Research Symposium (NOIRS) is the only conference solely dedicated to occupational injury research and prevention. The 8th NOIRS, sponsored by the National Institute for Occupational Safety and Health (NIOSH) and several partners, was held on May 10-12, 2022. NOIRS was held entirely virtually in response to concerns of the COVID-19 pandemic and honoring the symposium theme "Preventing Workplace Injuries in a Changing World." About this Special Issue: The intent of this issue is to highlight the breadth of high-quality presentations at NOIRS, and to make them available to those who did not participate in the conference. This issue includes three short communication articles and nine research articles. Featured research articles in this special issue span a wide variety of methods, data sources, and worker populations. They address leading and emerging causes and contributors to occupational injury in a range of industries and occupations. Concluding Remarks: We hope that this special issue provides readers with a view into some of the research presented at the 2022 NOIRS. We also hope the articles are useful for research and practice, and thinking toward the future.

Analysis of single nucleotide polymorphisms in chronic beryllium disease.

Sarcoidosis and chronic beryllium disease (CBD) are phenocopies, however the latter one has a clear trigger factor that is beryllium exposure. This study analyses single nucleotide polymorphisms (SNPs) in a large cohort for beryllium-exposed persons. SNPs were chosen for their relevance in sarcoidosis. Even though one of largest cohorts of beryllium-exposed persons was analysed, no statistically relevant association between any SNP and CBD could be verified. Notably, some SNPs exhibit inverse OR for beryllium sensitization and CBD with nominally statistical significance, which allows hypothesizing about pathophysiological role of genes for the disease triggering and development.

Associations of Metrics of Peak Inhalation Exposure and Skin Exposure Indices With Beryllium Sensitization at a Beryllium Manufacturing Facility.

OBJECTIVES: Peak beryllium inhalation exposures and exposure to the skin may be relevant for developing beryllium sensitization (BeS). The objective of this study was to identify risk factors associated with BeS to inform the prevention of sensitization, and the development of chronic beryllium disease (CBD). METHODS: In a survey of short-term workers employed at a primary beryllium manufacturing facility between the years 1994-1999, 264 participants completed a questionnaire and were tested for BeS. A range of qualitative and quantitative peak inhalation metrics and skin exposure indices were created using: personal full-shift beryllium exposure measurements, 15 min to 24 h process-specific task and area exposure measurements, glove measurements as indicator of skin exposure, process-upset information gleaned from historical reports, and self-reported information on exposure events. Hierarchical clustering was conducted to systematically group participants based on similarity of patterns of 16 exposure variables. The associations of the exposure metrics with BeS and self-reported skin symptoms (in work areas processing beryllium salts as well as in other work areas) were evaluated using correlation analysis, log-binomial and logistic regression models with splines. RESULTS: Metrics of peak inhalation exposure, indices of skin exposure, and using material containing beryllium salts were significantly associated with skin symptoms and BeS; skin symptoms were a strong predictor of BeS. However, in this cohort, we could not tease apart the independent effects of skin exposure from inhalation exposure, as these exposures occurred simultaneously and were highly correlated. Hierarchical clustering identified groups of participants with unique patterns of exposure characteristics resulting in different prevalence of BeS and skin symptoms. A cluster with high skin exposure index and use of material containing beryllium salts had the highest prevalence of BeS and self-reported skin symptoms, followed by a cluster with high inhalation and skin exposure index and a very small fraction of jobs in which beryllium salts were used. A cluster with low inhalation and skin exposure and no workers using beryllium salts had no cases of BeS. CONCLUSION: Multiple pathways and types of exposure were associated with BeS and may be important for informing BeS prevention. Prevention efforts should focus on controlling airborne beryllium exposures with attention to peaks, use of process characteristics (e.g. the likelihood of upset conditions to design interventions) minimize skin exposure to beryllium particles, and in particular, eliminate skin contact with beryllium salts to interrupt potential exposure pathways for BeS risk.

6th National Occupational Injury Research Symposium: Advancing Occupational Injury Research Through Integration and Partnership.

INTRODUCTION: The National Occupational Injury Research Symposium (NOIRS) is the only regularly held forum exclusively dedicated to occupational injury research and prevention. METHOD: The 2015 conference theme, advancing occupational injury research through integration and partnership, shaped the conference and is reflected in articles selected for this special issue. RESULTS' CONCLUSION: The 6th NOIRS, held May 19-21, 2015, brought together more than 250 researchers, occupational safety practitioners and students to share and discuss occupational injury research. Articles in this special issue highlight some of the research presented at the conference, reflect multiple scientific disciplines and approaches, cover a breadth of occupational injury causes and worker populations, and provide examples of research advanced by partnerships. PRACTICAL APPLICATIONS: The next NOIRS, tentatively scheduled for 2018, will build upon the theme of integration and partnership as well as feedback from conference attendees.

A post-conference evaluation of the 2015 National Occupational Injury Research Symposium.

INTRODUCTION: The National Occupational Injury Research Symposium (NOIRS) is the only national forum focused on occupational injury research findings, data and methods, and prevention strategies; it has been convened every 3-5years since 1997. Held in May 2015, the 6th symposium's theme was "Advancing Occupational Injury Research through Integration and Partnership." Organizers requested that attendees complete a post-meeting evaluation to assess meeting impact, and gather information useful in planning subsequent meetings and activities. METHOD: The questionnaire was publicized via a quick response code and link to the survey on symposium book cover, and mentioned at each scientific session. The online survey was designed to be completed in ≤15min; no identifying information was collected. Survey link remained open for seven days post-symposium. RESULTS: About 50% of registered attendees responded. Almost half were attending their first NOIRS. Most were researchers (69%); 45% were affiliated with government and 38% with university or research institute. Five of six reported that the symposium mostly or completely met expectations. Reasons for attending included gaining exposure to new areas of research (87%), sharing their research (80%), and to develop new ideas for conducting research (79%). The majority (90%) reported that the symposium provided adequate networking opportunities. The conference venue was reported as good or better by 69%, moreso among repeat attendees (77%) compared to first-timers (61%). DISCUSSION: The evaluation demonstrated that NOIRS was valuable to attendees, and provided a forum for sharing research results, developing new research ideas, and networking. Respondents provided input on different aspects of NOIRS and suggestions useful in planning next NOIRS, tentatively scheduled for 2018. NOIRS 2015 objectives for integration across disciplines and partnership with industry and safety professionals were partially met. In planning NOIRS 2018, more attention should be paid to attracting and engaging a broader spectrum of attendees.

Research to Practice Implications of High-Risk Genotypes for Beryllium Sensitization and Disease.

OBJECTIVE: Beryllium workers may better understand their genetic susceptibility to chronic beryllium disease (CBD) expressed as population-based prevalence, rather than odds ratios from case-control studies. METHODS: We calculated CBD prevalences from allele-specific DNA sequences of 853 workers for Human Leukocyte Antigen (HLA)-DPB1 genotypes and groups characterized by number of E69-containing alleles and by calculated surface electronegativity of HLA-DPB1. RESULTS: Of 18 groups of at least 10 workers with specific genotypes, CBD prevalence was highest, 72.7%, for the HLA-DPB102:01:02/DPB117:01 genotype. Population-based grouped genotypes with two E69 alleles wherein one allele had -9 surface charge had a beryllium sensitization (BeS) of 52.6% and a CBD prevalence of 42.1%. CONCLUSIONS: The high CBD and BeS prevalences associated with -9-charged E69 alleles and two E69s suggest that workers may benefit from knowing their genetic susceptibility in deciding whether to avoid future beryllium exposure.

Work-related asthma cluster at a syntactic foam manufacturing facility - Massachusetts 2008-2013.

Work-related asthma is asthma that is caused or exacerbated by exposure to specific substances in the workplace. Approximately 10%-16% of adult-onset asthma cases are attributable to occupational factors, and estimates of asthma exacerbated by work range from 13% to 58%. During 2008-2012, the Massachusetts Department of Public Health received nine reports of work-related asthma among workers at a facility that manufactured syntactic foam used for flotation in the offshore oil and gas industry. These reports and a request from facility employees led to a CDC health hazard evaluation during 2012-2013 in which CDC reviewed records, toured the facility, and administered a questionnaire to current employees. Investigators found that workers' risk for asthma increased substantially after hire, possibly because of known asthma triggers (i.e., asthmagens) used in production. The company has since initiated efforts to reduce employee exposures to these substances. This cluster of work-related asthma was identified through CDC-funded, state-based surveillance and demonstrates complementary state and federal investigations.

An official American Thoracic Society statement: diagnosis and management of beryllium sensitivity and chronic beryllium disease.

RATIONALE: Beryllium continues to have a wide range of industrial applications. Exposure to beryllium can lead to sensitization (BeS) and chronic beryllium disease (CBD). OBJECTIVES: The purpose of this statement is to increase awareness and knowledge about beryllium exposure, BeS, and CBD. METHODS: Evidence was identified by a search of MEDLINE. The committee then summarized the evidence, drew conclusions, and described their approach to diagnosis and management. MAIN RESULTS: The beryllium lymphocyte proliferation test is the cornerstone of both medical surveillance and the diagnosis of BeS and CBD. A confirmed abnormal beryllium lymphocyte proliferation test without evidence of lung disease is diagnostic of BeS. BeS with evidence of a granulomatous inflammatory response in the lung is diagnostic of CBD. The determinants of progression from BeS to CBD are uncertain, but higher exposures and the presence of a genetic variant in the HLA-DP ß chain appear to increase the risk. Periodic evaluation of affected individuals can detect disease progression (from BeS to CBD, or from mild CBD to more severe CBD). Corticosteroid therapy is typically administered when a patient with CBD exhibits evidence of significant lung function abnormality or decline. CONCLUSIONS: Medical surveillance in workplaces that use beryllium-containing materials can identify individuals with BeS and at-risk groups of workers, which can help prioritize efforts to reduce inhalational and dermal exposures.

Migration of Beryllium via Multiple Exposure Pathways among Work Processes in Four Different Facilities.

Inhalation of beryllium is associated with the development of sensitization; however, dermal exposure may also be important. The primary aim of this study was to elucidate relationships among exposure pathways in four different manufacturing and finishing facilities. Secondary aims were to identify jobs with increased levels of beryllium in air, on skin, and on surfaces; identify potential discrepancies in exposure pathways, and determine if these are related to jobs with previously identified risk. Beryllium was measured in air, on cotton gloves, and on work surfaces. Summary statistics were calculated and correlations among all three measurement types were examined at the facility and job level. Exposure ranking strategies were used to identify jobs with higher exposures. The highest air, glove, and surface measurements were observed in beryllium metal production and beryllium oxide ceramics manufacturing jobs that involved hot processes and handling powders. Two finishing and distribution facilities that handle solid alloy products had lower exposures than the primary production facilities, and there were differences observed among jobs. For all facilities combined, strong correlations were found between air-surface (rp ≥ 0.77), glove-surface (rp ≥ 0.76), and air-glove measurements (rp ≥ 0.69). In jobs where higher risk of beryllium sensitization or disease has been reported, exposure levels for all three measurement types were higher than in jobs with lower risk, though they were not the highest. Some jobs with low air concentrations had higher levels of beryllium on glove and surface wipe samples, suggesting a need to further evaluate the causes of the discrepant levels. Although such correlations provide insight on where beryllium is located throughout the workplace, they cannot identify the direction of the pathways between air, surface, or skin. Ranking strategies helped to identify jobs with the highest combined air, glove, and/or surface exposures. All previously identified high-risk jobs had high air concentrations, dermal mass loading, or both, and none had low dermal and air. We have found that both pathways are relevant. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of Occupational and Environmental Hygiene for the following free supplemental resource: a file describing the forms of beryllium materials encountered during production and characteristics of the aerosols by process areas.].

A decision process for determining whether to conduct responder health research following large disasters.

Disasters often set the stage for scientific inquiry within the field of occupational safety and health. This is especially true when the long-term consequences of exposures associated with a particular disaster are unclear. However, a responder research study can be costly and difficult to design, and researchers must consider whether the proposed study will produce useful, reliable results and is a prudent public health investment. The decision process can be segregated into various components, including scientific rationale that should be formally recognized as critical to efficiently and effectively determine whether a research study is warranted. The scientific rationale includes certain controlling or "gatekeeper" factors that should be present to proceed with research.

Long-term efficacy of a program to prevent beryllium disease.

BACKGROUND: In 2000, a manufacturer of beryllium materials and products introduced a comprehensive program to prevent beryllium sensitization and chronic beryllium disease (CBD). We assessed the program's efficacy in preventing sensitization 9 years after implementation. METHODS: Current and former workers hired since program implementation completed questionnaires and provided blood samples for the beryllium lymphocyte proliferation test (BeLPT). Using these data, as well as company medical surveillance data, we estimated beryllium sensitization prevalence. RESULTS: Cross-sectional prevalence of sensitization was 0.7% (2/298). Combining survey results with surveillance results, a total of seven were identified as sensitized (2.3%). Early Program workers were more likely to be sensitized than Late Program workers; one of the latter was newly identified. All sensitization was identified while participants were employed. One worker was diagnosed with CBD during employment. CONCLUSIONS: The combination of increased respiratory and dermal protection, enclosure and improved ventilation of high-risk processes, dust migration control, improved housekeeping, and worker and management education showed utility in reducing sensitization in the program's first 9 years. The low rate (0.6%, 1/175) among Late Program workers suggests that continuing refinements have provided additional protection against sensitization compared to the program's early years.

Chronic beryllium disease, HLA-DPB1, and the DP peptide binding groove.

Multiple epidemiologic studies demonstrate associations between chronic beryllium disease (CBD), beryllium sensitization (BeS), and HLA-DPB1 alleles with a glutamic acid residue at position 69 (E69). Results suggest that the less-frequent E69 variants (non-*0201/*0202 alleles) might be associated with greater risk of CBD. In this study, we sought to define specific E69-carrying alleles and their amino acid sequences in the DP peptide binding groove, as well as their relationship to CBD and BeS risk, using the largest case control study to date. We enrolled 502 BeS/CBD subjects and 653 beryllium-exposed controls from three beryllium industries who gave informed consent for participation. Non-Hispanic white cases and controls were frequency-matched by industry. HLA-DPB1 genotypes were determined using sequence-specific primer PCR. The E69 alleles were tested for association with disease individually and grouped by amino acid structure using logistic regression. The results show that CBD cases were more likely than controls to carry a non-*02 E69 allele than an *02 E69, with odds ratios (95% confidence interval) ranging from 3.1 (2.1-4.5) to 3.9 (2.6-5.9) (p < 0.0001). Polymorphic amino acids at positions 84 and 11 were associated with CBD: DD versus GG, 2.8 (1.8-4.6), p < 0.0001; GD versus GG, 2.1 (1.5-2.8), p < 0.0001; LL versus GG, 3.2 (1.8-5.6), p < 0.0001; GL versus GG, 2.8 (2.1-3.8), p < 0.0001. Similar results were found within the BeS group and CBD/BeS combined group. We conclude that the less frequent E69 alleles confer more risk for CBD than does *0201. Recent studies examining how the composition and structure of the binding pockets influence peptide binding in MHC genes, as well of studies showing the topology of the TCR to likely bind DPB1 preferentially, give plausible biological rationale for these findings.

Sensitization and chronic beryllium disease at a primary manufacturing facility, part 2: validation of historical exposures.

OBJECTIVE: The aim of this study was to evaluate the validity of a job exposure matrix (JEM) constructed for the period 1994-1999. Historical exposure estimates (HEE) for the JEM were constructed for all job and year combinations by applying temporal factors reflecting annual change in area air measurements (1994-1998) to the personal baseline exposure estimates (BEE) collected in 1999. The JEM was generated for an epidemiologic study to examine quantitative exposure-response relationships with sensitization and chronic beryllium disease. METHODS: The validity of the BEE and HEE was evaluated by comparing them with a validation dataset of independently collected personal beryllium exposure measurements from 1999 and 1994-1998, respectively. Agreement between the JEM and validation data was assessed using relative bias and concordance correlation coefficients (CCC). RESULTS: The BEE and HEE overestimated the measured exposures in their respective validation datasets by 8% and 6%, respectively. The CCC reflecting the deviation of the fitted line from the concordance line, showed good agreement for both BEE (CCC=0.80) and HEE (CCC=0.72). Proportional difference did not change with exposure levels or by process area and year. Overall, the agreement between the JEM and validation estimates (from combined HEE and BEE) was high (CCC=0.77). CONCLUSIONS: This study demonstrated that the reconstructed beryllium exposures at a manufacturing facility were reliable and can be used in epidemiologic studies.

Sensitization and chronic beryllium disease at a primary manufacturing facility, part 1: historical exposure reconstruction.

OBJECTIVES: Previous epidemiologic studies of beryllium sensitization (BeS) and chronic beryllium disease (CBD) have reported inconsistent exposure-response relationships, likely due to exposure misclassification. The objective of this study was to develop historical estimates of size-selective personal exposure to beryllium for an epidemiologic study. METHODS: In 1999, a cross-sectional survey of workers hired after 1 January 1994 was conducted at a beryllium production facility. Personal exposure data from two air sampling surveys conducted in 1999 were used to obtain total, respirable, and submicron particle baseline exposure estimates (BEE) for a job-exposure matrix (JEM). General area air samples collected from 1994-1999 were used to estimate annual changes in exposures (temporal factors) for 24 different process areas. Historical exposure estimates (HEE) were calculated by applying the temporal factors to the BEE. Workers were assigned HEE based on their work history, and their historical exposure profile was summarized as cumulative, average, or highest-ever job exposure. RESULTS: Changes in exposure over a 6-year period were observed in 10 of the 24 process areas with an overall mean decline of 18% per year. The overall total exposure for study participants over their work tenure ranged from: 0.001-34.44 µg/m(3)-year, 0.01-16.26 µg/m(3), and 0.01-17.54 µg /m(3) for cumulative, average, and highest-ever job, respectively. For respirable exposures, the ranges were: 0.001-15.54 µg/m(3)-year, 0.01-3.56 µg/m(3), 0.01-5.54 µg /m(3) for cumulative, average, and highest-ever job, respectively. CONCLUSIONS: Using this JEM, exposure-response relationships for BeS and CBD can be explored over a range of exposure metrics such as total, respirable, and submicron beryllium mass concentrations, including summary measures such as cumulative, average, or highest exposures, with the ultimate objective of elucidating a quantitative exposure-response relationship.

Sensitization and chronic beryllium disease at a primary manufacturing facility, part 3: exposure-response among short-term workers.

OBJECTIVES: Exposure-response relations for beryllium sensitization (BeS) and chronic beryllium disease (CBD) using aerosol mass concentration have been inconsistent, although process-related risks found in most studies suggest that exposure-dependent risks exist. We examined exposure-response relations using personal exposure estimates in a beryllium worker cohort with limited work tenure to minimize exposure misclassification. METHODS: The population comprised workers employed in 1999 with six years or less tenure. Each completed a work history questionnaire and was evaluated for immunological sensitization and CBD. A job-exposure matrix was combined with work histories to create individual estimates of average, cumulative, and highest-job-worked exposure for total, respirable, and submicron beryllium mass concentrations. We obtained odds ratios from logistic regression models for exposure-response relations, and evaluated process-related risks. RESULTS: Participation was 90.7% (264/291 eligible). Sensitization prevalence was 9.8% (26/264), with 6 sensitized also diagnosed with CBD (2.3%, 6/264). A general pattern of increasing sensitization prevalence was observed as exposure quartile increased. Both total and respirable beryllium mass concentration estimates were positively associated with sensitization (average and highest job), and CBD (cumulative). Increased sensitization prevalence was identified in metal/oxide production, alloy melting and casting, and maintenance, and for CBD in melting and casting. Lower sensitization prevalence was observed in plant-area administrative work. CONCLUSIONS: Sensitization was associated with average and highest job exposures, and CBD was associated with cumulative exposure. Both total and respirable mass concentrations were relevant predictors of risk. New process-related risks were identified in melting and casting and maintenance.

Characteristics of beryllium exposure to small particles at a beryllium production facility.

Epidemiological studies have reported process-specific elevated prevalence of beryllium sensitization (BeS) and chronic beryllium disease (CBD) among workers. However, exposure-response relationships have been inconsistent, possibly due to incomplete characterization of many biologically relevant aspects of exposure, including particle size. In 1999, two surveys were conducted 3-5 months apart at a beryllium metal, oxide, and alloy production facility during which personal impactor samples (n = 198) and personal 37-mm closed-face cassette (CFC) 'total' samples (n = 4026) were collected. Among process areas, median particle mass median aerodynamic diameter ranged from 5 to 14 µm. A large fraction of the beryllium aerosol was in the nonrespirable size range. Respirable beryllium concentrations were among the highest for oxide production [geometric mean (GM) = 2.02 µg m⁻³, geometric standard deviation (GSD) = 1.3] and pebbles plant (GM = 1.05 µg m⁻³, GSD = 2.9), areas historically associated with high risk of BeS and CBD. The relationship between GM 'CFC total' and GM respirable beryllium for jobs varied by process areas; the rank order of the jobs showed high overall consistency (Spearman r = 0.84), but the overall correlation was moderate (Pearson r = 0.43). Total beryllium concentrations varied greatly within and between workers among process areas; within-worker variance was larger than between-worker variance for most processes. A review of exposure characteristics among process areas revealed variation in chemical forms and solubility. Process areas with high risk of BeS and CBD had exposure to both soluble and insoluble forms of beryllium. Consideration of biologically relevant aspects of exposure such as beryllium particle size distribution, chemical form, and solubility will likely improve exposure assessment.

Association between IL-1A single nucleotide polymorphisms and chronic beryllium disease and beryllium sensitization.

OBJECTIVE: To determine if single nucleotide polymorphisms (SNPs) in interleukin (IL) IL-1A, IL-1B, IL-1RN, IL-2, IL-9, and IL-9R were associated with chronic beryllium disease (CBD) and beryllium sensitization (BeS). METHODS: Forty SNPs in six IL genes were evaluated in 85 individuals with CBD, 61 individuals with BeS, and 730 individuals without BeS or CBD (nonsensitized) using a 5' nuclease polymerase chain reaction assay. Logistic regression was used to evaluate the association between IL SNPs, CBD, and BeS, adjusting for plant-site and HLA-DPB1Glu69 in additive, dominant, and recessive inheritance models. RESULTS: IL-1A-1142, IL-1A-3769, and IL-1A-4697 were significantly associated with CBD in both the additive and dominant models compared to individuals with BeS or the nonsensitized. CONCLUSIONS: These results indicate that genetic variations in the IL-1A gene may play a role in the development of CBD but not BeS.

Evaluation of a preventive program to reduce sensitization at a beryllium metal, oxide, and alloy production plant.

OBJECTIVE: We evaluated a workplace preventive program's effectiveness, which emphasized skin and respiratory protection, workplace cleanliness, and beryllium migration control in lowering beryllium sensitization. METHODS: We compared sensitization prevalence and incidence rates for workers hired before and after the program using available cross sectional and longitudinal surveillance data. RESULTS: Sensitization prevalence was 8.9% for the Pre-Program Group and 2.1% for the Program Group. The sensitization incidence rate was 3.7/1000 person-months for the Pre-Program Group and 1.7/1000 person-months for the Program Group. After making adjustments for potential selection and information bias, sensitization prevalence for the Pre-Program Group was 3.8 times higher (95% CI = 1.5 to 9.3) than the Program Group. The sensitization incidence rate ratio comparing the Pre-Program Group to the Program Group was 1.6 (95% CI = 0.8 to 3.6). CONCLUSIONS: This preventive program reduced the prevalence of but did not eliminate beryllium sensitization.

Efficacy of a program to prevent beryllium sensitization among new employees at a copper-beryllium alloy processing facility.

OBJECTIVES: In 2000, 7% of workers at a copper-beryllium facility were beryllium sensitized. Risk was associated with work near a wire annealing/pickling process. The facility then implemented a preventive program including particle migration control, respiratory and dermal protection, and process enclosure. We assessed the program's efficacy in preventing beryllium sensitization. METHODS: In 2000, the facility began testing new hires (program workers) with beryllium lymphocyte proliferation tests (BeLPTs) at hire and at intervals during employment. We compared sensitization incidence rates (IRs) and prevalence rates for workers hired before the program (legacy workers) with rates for program workers, including program worker subgroups. We also examined trends in BeLPTs from a single laboratory. RESULTS: In all, five of 43 legacy workers (IR = 3.8/1,000 person-months) and three of 82 program workers (IR = 1.9/1,000 person-months) were beryllium sensitized, for an incidence rate ratio (IRR) of 2.0 (95% confidence interval [CI] 0.5, 10.1). Two of 37 pre-enclosure program workers (IR = 2.4/1,000 person-months) and one of 45 post-enclosure program workers (IR = 1.4/1,000 person-months) were beryllium sensitized, for IRRs of 1.6 (95% CI 0.3, 11.9) and 2.8 (95% CI 0.4, 66.2), respectively, compared with legacy workers. Test for trend in prevalence rates was significant. Among 2,159 first-draw BeLPTs during 95 months, we identified seven months when high numbers of redraws were required, with one possible misclassification in this facility. CONCLUSIONS: Fewer workers became sensitized after implementation of the preventive program. However, low statistical power due to the facility's small workforce prevents a definitive conclusion about the program's efficacy. These findings have implications for other copper-beryllium facilities, where program components may merit application.