Functional mimicry of sea urchin biomineralization proteins with CaCO3-binding peptides selected by phage display.

The intricate process of biomineralization, e.g. in sea urchins, involves the precise interplay of highly regulated mineralization proteins and the spatiotemporal coordination achieved through compartmentalization. However, the investigation of biomineralization effector molecules, e.g. proteins, is challenging, due to their very low abundance. Therefore, we investigate the functional mimicry in the bioinspired precipitation of calcium carbonate (CaCO3) with artificial peptides selected from a peptide library by phage display based on peptide-binding to calcite and aragonite, respectively. The structure-directing effects of the identified peptides were compared to those of natural protein mixes isolated from skeletal (test) structures of two sea urchin species (Arbacia lixula and Paracentrotus lividus). The calcium carbonate samples deposited in the absence or presence of peptides were analyzed with a set of complementary techniques with regard to morphology, polymorph, and nanostructural motifs. Remarkably, some of the CaCO3-binding peptides induced morphological features in calcite that appeared similar to those obtained in the presence of the natural protein mixes. Many of the peptides identified as most effective in exerting a structure-directing effect on calcium carbonate crystallization were rich in basic amino acid residues. Hence, our in vitro mineralization study further highlights the important, but often neglected, role of positively charged soluble organic matrices associated with biological and bioinspired CaCO3 deposition.

On-Surface Synthesis and Characterization of a High-Spin Aza-[5]-Triangulene.

Triangulenes are a class of open-shell triangular graphene flakes with total spin increasing with their size. In the last years, on-surface-synthesis strategies have permitted fabricating and engineering triangulenes of various sizes and structures with atomic precision. However, direct proof of the increasing total spin with their size remains elusive. In this work, we report the combined in-solution and on-surface synthesis of a large nitrogen-doped triangulene (aza-[5]-triangulene) on a Au(111) surface, and the detection of its high-spin ground state. Bond-resolved scanning tunneling microscopy images uncovered radical states distributed along the zigzag edges, which were detected as weak zero-bias resonances in scanning tunneling spectra. These spectral features reveal the partial Kondo screening of a high-spin state. Through a combination of several simulation tools, we find that the observed distribution of radical states is explained by a quintet ground state (S=2), instead of the quartet state (S=3/2) expected for the neutral species. This confirms that electron transfer to the metal substrate raises the spin of the ground state. We further provide a qualitative description of the change of (anti)aromaticity introduced by N-substitution, and its role in the charge stabilization on a surface, resulting in an S=2 aza-triangulene on Au(111).

Femtosecond Thermal and Nonthermal Hot Electron Tunneling Inside a Photoexcited Tunnel Junction.

Efficient operation of electronic nanodevices at ultrafast speeds requires understanding and control of the currents generated by femtosecond bursts of light. Ultrafast laser-induced currents in metallic nanojunctions can originate from photoassisted hot electron tunneling or lightwave-induced tunneling. Both processes can drive localized photocurrents inside a scanning tunneling microscope (STM) on femto- to attosecond time scales, enabling ultrafast STM with atomic spatial resolution. Femtosecond laser excitation of a metallic nanojunction, however, also leads to the formation of a transient thermalized electron distribution, but the tunneling of thermalized hot electrons on time scales faster than electron-lattice equilibration is not well understood. Here, we investigate ultrafast electronic heating and transient thermionic tunneling inside a metallic photoexcited tunnel junction and its role in the generation of ultrafast photocurrents in STM. Phase-resolved sampling of broadband terahertz (THz) pulses via the THz-field-induced modulation of ultrafast photocurrents allows us to probe the electronic temperature evolution inside the STM tip and to observe the competition between instantaneous and delayed tunneling due to nonthermal and thermal hot electron distributions in real time. Our results reveal the pronounced nonthermal character of photoinduced hot electron tunneling and provide a detailed microscopic understanding of hot electron dynamics inside a laser-excited tunnel junction.

Visualization and identification of single meteoritic organic molecules by atomic force microscopy.

Using high-resolution atomic force microscopy (AFM) with CO-functionalized tips, we atomically resolved individual molecules from Murchison meteorite samples. We analyzed powdered Murchison meteorite material directly, as well as processed extracts that we prepared to facilitate characterization by AFM. From the untreated Murchison sample, we resolved very few molecules, as the sample contained mostly small molecules that could not be identified by AFM. By contrast, using a procedure based on several trituration and extraction steps with organic solvents, we isolated a fraction enriched in larger organic compounds. The treatment increased the fraction of molecules that could be resolved by AFM, allowing us to identify organic constituents and molecular moieties, such as polycyclic aromatic hydrocarbons and aliphatic chains. The AFM measurements are complemented by high-resolution mass spectrometry analysis of Murchison fractions. We provide a proof of principle that AFM can be used to image and identify individual organic molecules from meteorites and propose a method for extracting and preparing meteorite samples for their investigation by AFM. We discuss the challenges and prospects of this approach to study extraterrestrial samples based on single-molecule identification.

Order from a Mess: The Growth of 5-Armchair Graphene Nanoribbons.

The advent of on-surface chemistry under vacuum has vastly increased our capabilities to synthesize carbon nanomaterials with atomic precision. Among the types of target structures that have been synthesized by these means, graphene nanoribbons (GNRs) have probably attracted the most attention. In this context, the vast majority of GNRs have been synthesized from the same chemical reaction: Ullmann coupling followed by cyclodehydrogenation. Here, we provide a detailed study of the growth process of five-atom-wide armchair GNRs starting from dibromoperylene. Combining scanning probe microscopy with temperature-dependent XPS measurements and theoretical calculations, we show that the GNR growth departs from the conventional reaction scenario. Instead, precursor molecules couple by means of a concerted mechanism whereby two covalent bonds are formed simultaneously, along with a concomitant dehydrogenation. Indeed, this alternative reaction path is responsible for the straight GNR growth in spite of the initial mixture of reactant isomers with irregular metal-organic intermediates that we find. The provided insight will not only help understanding the reaction mechanisms of other reactants but also serve as a guide for the design of other precursor molecules.

π-Diradical Aromatic Soot Precursors in Flames.

Soot emitted from incomplete combustion of hydrocarbon fuels contributes to global warming and causes human disease. The mechanism by which soot nanoparticles form within hydrocarbon flames is still an unsolved problem in combustion science. Mechanisms proposed to date involving purely chemical growth are limited by slow reaction rates, whereas mechanisms relying on solely physical interactions between molecules are limited by weak intermolecular interactions that are unstable at flame temperatures. Here, we show evidence for a reactive π-diradical aromatic soot precursor imaged using non-contact atomic force microscopy. Localization of π-electrons on non-hexagonal rings was found to allow for Kekulé aromatic soot precursors to possess a triplet diradical ground state. Barrierless chain reactions are shown between these reactive sites, which provide thermally stable aromatic rim-linked hydrocarbons under flame conditions. Quantum molecular dynamics simulations demonstrate physical condensation of aromatics that survive for tens of picoseconds. Bound internal rotors then enable the reactive sites to find each other and become chemically cross-linked before dissociation. These species provide a rapid, thermally stable chain reaction toward soot nanoparticle formation and could provide molecular targets for limiting the emission of these toxic combustion products.

Intramolecular Coupling of Terminal Alkynes by Atom Manipulation.

Glaser-like coupling of terminal alkynes by thermal activation is extensively used in on-surface chemistry. Here we demonstrate an intramolecular version of this reaction performed by atom manipulation. We used voltage pulses from the tip to trigger a Glaser-like coupling between terminal alkyne carbons within a custom-synthesized precursor molecule adsorbed on bilayer NaCl on Cu(111). Different conformations of the precursor molecule and the product were characterized by molecular structure elucidation with atomic force microscopy and orbital density mapping with scanning tunneling microscopy, accompanied by density functional theory calculations. We revealed partially dehydrogenated intermediates, providing insight into the reaction pathway.

Synthesis of Cyclo[18]carbon via Debromination of C18Br6.

Cyclo[18]carbon (C18, a molecular carbon allotrope) can be synthesized by dehalogenation of a bromocyclocarbon precursor, C18Br6, in 64% yield, by atomic manipulation on a sodium chloride bilayer on Cu(111) at 5 K, and imaged by high-resolution atomic force microscopy. This method of generating C18 gives a higher yield than that reported previously from the cyclocarbon oxide C24O6. The experimental images of C18 were compared with simulated images for four theoretical model geometries, including possible bond-angle alternation: D18h cumulene, D9h polyyne, D9h cumulene, and C9h polyyne. Cumulenic structures, with (D9h) and without (D18h) bond-angle alternation, can be excluded. Polyynic structures, with (C9h) and without (D9h) bond-angle alternation, both show a good agreement with the experiment and are challenging to differentiate.

Automated structure discovery in atomic force microscopy.

Atomic force microscopy (AFM) with molecule-functionalized tips has emerged as the primary experimental technique for probing the atomic structure of organic molecules on surfaces. Most experiments have been limited to nearly planar aromatic molecules due to difficulties with interpretation of highly distorted AFM images originating from nonplanar molecules. Here, we develop a deep learning infrastructure that matches a set of AFM images with a unique descriptor characterizing the molecular configuration, allowing us to predict the molecular structure directly. We apply this methodology to resolve several distinct adsorption configurations of 1S-camphor on Cu(111) based on low-temperature AFM measurements. This approach will open the door to applying high-resolution AFM to a large variety of systems, for which routine atomic and chemical structural resolution on the level of individual objects/molecules would be a major breakthrough.

An sp-hybridized molecular carbon allotrope, cyclo[18]carbon.

Carbon allotropes built from rings of two-coordinate atoms, known as cyclo[n]carbons, have fascinated chemists for many years, but until now they could not be isolated or structurally characterized because of their high reactivity. We generated cyclo[18]carbon (C18) using atom manipulation on bilayer NaCl on Cu(111) at 5 kelvin by eliminating carbon monoxide from a cyclocarbon oxide molecule, C24O6 Characterization of cyclo[18]carbon by high-resolution atomic force microscopy revealed a polyynic structure with defined positions of alternating triple and single bonds. The high reactivity of cyclocarbon and cyclocarbon oxides allows covalent coupling between molecules to be induced by atom manipulation, opening an avenue for the synthesis of other carbon allotropes and carbon-rich materials from the coalescence of cyclocarbon molecules.

Elucidating the Geometric Substitution of Petroporphyrins by Spectroscopic Analysis and Atomic Force Microscopy Molecular Imaging.

Determination of the molecular structures of petroporphyrins has been crucial to understand the diagenetic pathways and maturation of petroleum. However, these studies have been hampered by their structural complexity and the challenges associated with their isolation. In comparison to the skeletal macrocyclic structures, much less is known about the substitutions, which are more sensitive to the maturation and diagenesis pathways. While these isolated vanadyl petroporphyrins largely consist of etioporphyrin and deoxophylloerythroetioporphyrin as expected, surprisingly, we find evidence that one or a few ß hydrogens are present in petroporphyrins of low carbon numbers using a combination of ultraviolet-visible spectroscopy, Fourier transform ion cyclotron resonance mass spectrometry, and non-contact atomic force microscopy. Petroporphyrins with ß hydrogens were not anticipated on the basis of their biological precursors. The data support dealkylation under catagenesis but not transalkylation or random alkylation of the ß and meso positions, despite the fact that more complex porphyrin structures are formed.

A Single-Molecule Chemical Reaction Studied by High-Resolution Atomic Force Microscopy and Scanning Tunneling Microscopy Induced Light Emission.

Atomic force microscopy (AFM) as well as scanning tunneling microscopy induced light emission (STM-LE) are, each on their own, powerful tools used to investigate a large variety of properties of single molecules adsorbed on a surface. However, accessing both structural information by AFM as well as optical information by STM-LE on the same molecule so far remains elusive. We present a combined high-resolution AFM and STM-LE study on single metal-oxide phthalocyanines. Using atomic manipulation, the molecules can be deliberately reduced. We demonstrate structure elucidation and adsorption geometry determination of single molecules with atomic resolution combined with optical characterization by STM-LE and the possibility of investigating the change in a molecule's exciton emission intensity by a chemical reaction.

Exploring a Route to Cyclic Acenes by On-Surface Synthesis.

A route to generate cyclacenes by on-surface synthesis is explored. We started by synthesizing two tetraepoxycyclacenes by sequences of Diels-Alder cycloadditions. Subsequently, these molecules were deposited onto Cu(111) and scanning-tunneling-microscopy(STM)-based atom manipulation was employed to dissociate the oxygen atoms. Atomic force microscopy (AFM) with CO-functionalized tips enabled the detailed characterization of the reaction products and revealed that, at most, two oxygens per molecule could be removed. Importantly, our experimental results suggest that the generation of cyclacenes by the described route might be possible for larger epoxycyclacenes.

GTS-21 attenuates loss of body mass, muscle mass, and function in rats having systemic inflammation with and without disuse atrophy.

Muscle changes of critical illness are attributed to systemic inflammatory responses and disuse atrophy. GTS-21 (3-(2,4-dimethoxy-benzylidene)anabaseine), also known as DMBX-A) is a synthetic derivative of the natural product anabaseine that acts as an agonist at α7-acetylcholine receptors (α7nAChRs). Hypothesis tested was that modulation of inflammation by agonist GTS-21 (10 mg/kg b.i.d. intraperitoneally) will attenuate body weight (BW) and muscle changes. Systemic sham inflammation was produced in 125 rats by Cornyebacterium parvum (C.p.) or saline injection on days 0/4/8. Seventy-four rats had one immobilized-limb producing disuse atrophy. GTS-21 effects on BW, tibialis muscle mass (TMM), and function were assessed on day 12. Systemically, methemoglobin levels increased 26-fold with C.p. (p < 0.001) and decreased significantly (p < 0.033) with GTS-21. Control BW increased (+ 30 ± 9 g, mean ± SD) at day 12, but decreased with C.p. and superimposed disuse (p = 0.005). GTS-21 attenuated BW loss in C.p. (p = 0.005). Compared to controls, TMM decreased with C.p. (0.43 ± 0.06 g to 0.26 ± 0.03 g) and with superimposed disuse (0.18 ± 0.04 g); GTS-21 ameliorated TMM loss to 0.32 ± 0.04 (no disuse, p = 0.028) and to 0.22 ± 0.03 (with disuse, p = 0.004). Tetanic tensions decreased with C.p. or disuse and GTS-21 attenuated tension decrease in animals with disuse (p = 0.006) and in animals with C.p. and disuse (p = 0.029). C.p.-induced 11-fold increased muscle α7nAChR expression was decreased by > 60% with GTS-21 treatment. In conclusion, GTS-21 modulates systemic inflammation, evidenced by both decreased methemoglobin levels and decrease of α7nAChR expression, and mitigates inflammation-mediated loss of BW, TMM, fiber size, and function.

Atomic Force Microscopy Identifying Fuel Pyrolysis Products and Directing the Synthesis of Analytical Standards.

Here we present a new method that integrates atomic force microscopy (AFM) with analytical tools such as high-performance liquid chromatography (HPLC) with diode-array ultraviolet-visible (UV) absorbance, and mass spectrometry (MS) along with synthetic chemistry. This allows the detection, identification, and quantification of novel polycyclic aromatic hydrocarbons (PAH) in complex molecular mixtures. This multidisciplinary methodology is employed to characterize the supercritical pyrolysis products of n-decane, a model fuel. The pyrolysis experiments result in a complex mixture of both unsubstituted as well as highly methylated PAH. We demonstrate the AFM-driven discovery of a novel compound, benz[ l]indeno[1,2,3- cd]pyrene, with the chemical structure assignment serving as input for the chemical synthesis of such molecule. The synthesis is verified by AFM, and the synthesized compound is used as a reference standard in analytical measurements, establishing the first-ever unequivocal identification and quantification of this PAH as a fuel product. Moreover, the high-resolution AFM analysis detected several five- to eight-ring PAH, which represents novel fuel pyrolysis and/or combustion products. This work provides a route to develop new analytical standards by symbiotically using AFM, chemical synthesis, and modern analytical tools.

Elemental Identification by Combining Atomic Force Microscopy and Kelvin Probe Force Microscopy.

There are currently no experimental techniques that combine atomic-resolution imaging with elemental sensitivity and chemical fingerprinting on single molecules. The advent of using molecular-modified tips in noncontact atomic force microscopy (nc-AFM) has made it possible to image (planar) molecules with atomic resolution. However, the mechanisms responsible for elemental contrast with passivated tips are not fully understood. Here, we investigate elemental contrast by carrying out both nc-AFM and Kelvin probe force microscopy (KPFM) experiments on epitaxial monolayer hexagonal boron nitride (hBN) on Ir(111). The hBN overlayer is inert, and the in-plane bonds connecting nearest-neighbor boron and nitrogen atoms possess strong covalent character and a bond length of only ∼1.45 Å. Nevertheless, constant-height maps of both the frequency shift Δ f and the local contact potential difference exhibit striking sublattice asymmetry. We match the different atomic sites with the observed contrast by comparison with nc-AFM image simulations based on the density functional theory optimized hBN/Ir(111) geometry, which yields detailed information on the origin of the atomic-scale contrast.

Charge-Transfer-Driven Nonplanar Adsorption of F4TCNQ Molecules on Epitaxial Graphene.

π-conjugated organic molecules tend to adsorb in a planar configuration on graphene irrespective of their charge state. In contrast, here we demonstrate charging-induced strong structural relaxation of tetrafluorotetracyanoquinodimethane (F4TCNQ) on epitaxial graphene on Ir(111) (G/Ir(111)). The work function modulation over the graphene moiré unit cell causes site-selective charging of F4TCNQ. Upon charging, the molecule anchors to the face-centered cubic sites of the G/Ir(111) moiré through one or two cyano groups. The reaction is reversible and can be triggered on a single molecule by moving it between different adsorption sites. We introduce a model taking into account the trade-off between tilt-induced charging and reduced van der Waals interactions, which provides a general framework for understanding charging-induced structural relaxation on weakly interacting substrates. In addition, we argue that the partial sp3 rehybridization of the underlying graphene and the possible bonding mechanism between the cyano groups and the graphene substrate are also relevant for the complete understanding of the experiments. These results provide insight into molecular charging on graphene, and they are directly relevant for potential device applications where the use of molecules has been suggested for doping and band structure engineering.

Synthesis of Extended Atomically Perfect Zigzag Graphene - Boron Nitride Interfaces.

The combination of several materials into heterostructures is a powerful method for controlling material properties. The integration of graphene (G) with hexagonal boron nitride (BN) in particular has been heralded as a way to engineer the graphene band structure and implement spin- and valleytronics in 2D materials. Despite recent efforts, fabrication methods for well-defined G-BN structures on a large scale are still lacking. We report on a new method for producing atomically well-defined G-BN structures on an unprecedented length scale by exploiting the interaction of G and BN edges with a Ni(111) surface as well as each other.

Electronic states at the graphene-hexagonal boron nitride zigzag interface.

The electronic properties of graphene edges have been predicted to depend on their crystallographic orientation. The so-called zigzag (ZZ) edges haven been extensively explored theoretically and proposed for various electronic applications. However, their experimental study remains challenging due to the difficulty in realizing clean ZZ edges without disorder, reconstructions, or the presence of chemical functional groups. Here, we propose the ZZ-terminated, atomically sharp interfaces between graphene and hexagonal boron nitride (BN) as experimentally realizable, chemically stable model systems for graphene ZZ edges. Combining scanning tunneling microscopy and numerical methods, we explore the structure of graphene-BN interfaces and show them to host localized electronic states similar to those on the pristine graphene ZZ edge.

Templated self-assembly and local doping of molecules on epitaxial hexagonal boron nitride.

Using low-temperature scanning tunneling microscopy, we show that monolayer hexagonal boron nitride (h-BN) on Ir(111) acts as ultrathin insulating layer for organic molecules, while simultaneously templating their self-assembly. Tunneling spectroscopy experiments on cobalt phthalocyanine (CoPC) reveal narrow molecular resonances and indicate that the charge state of CoPC is periodically modulated by the h-BN moiré superstructure. Molecules in the second layer show site-selective adsorption behavior, allowing the synthesis of molecular dimers that are spatially ordered and inaccessible by usual chemical means.