RESUMO
Multimodal chromatography has emerged as a powerful method for the purification of therapeutic antibodies. However, process development of this separation technique remains challenging because of an intricate and molecule-specific interaction towards multimodal ligands, leading to time-consuming and costly experimental optimization. This study presents a multiscale modeling approach to predict the multimodal chromatographic behavior of therapeutic antibodies based on their sequence information. Linear gradient elution (LGE) experiments were performed on an anionic multimodal resin for 59 full-length antibodies, including five different antibody formats at pH 5.0, 6.0, and 7.0 that were used for parameter determination of a linear adsorption model at low loading density conditions. Quantitative structure-property relationship (QSPR) modeling was utilized to correlate the adsorption parameters with up to 1374 global and local physicochemical descriptors calculated from antibody homology models. The final QSPR models employed less than eight descriptors per model and demonstrated high training accuracy (R² > 0.93) and reasonable test set prediction accuracy (Q² > 0.83) for the adsorption parameters. Model evaluation revealed the significance of electrostatic interaction and hydrophobicity in determining the chromatographic behavior of antibodies, as well as the importance of the HFR3 region in antibody binding to the multimodal resin. Chromatographic simulations using the predicted adsorption parameters showed good agreement with the experimental data for the vast majority of antibodies not employed during the model training. The results of this study demonstrate the potential of sequence-based prediction for determining chromatographic behavior in therapeutic antibody purification. This approach leads to more efficient and cost-effective process development, providing a valuable tool for the biopharmaceutical industry.
Assuntos
Anticorpos , Relação Quantitativa Estrutura-Atividade , Cromatografia por Troca Iônica/métodosRESUMO
Compaction of dehydroxylated MgO nanocrystal powders produces adsorbed oxygen radicals with characteristic UV-vis spectroscopic fingerprints. Identical absorption bands arise upon UV excitation in an oxygen atmosphere but in the absence of uniaxial pressure. Photophysical calculations on MgO gas-phase clusters reveal that the observed optical transitions at 4.4 and 3.0 eV are consistent with adsorbed superoxide (O2·-) and ozonide (O3·-) species, respectively. The presence of these oxygen radicals is corroborated by electron paramagnetic resonance spectroscopy. Upon reaction with interfacial water, oxygen radicals convert into diamagnetic products with no absorptions in the UV-vis range. Since superoxide O2·- and ozonide anions O3·- play a key role in a variety of processes in heterogeneous catalysis, sensing, or as transient species in cold sintering, their UV-vis spectroscopic detection will enable in situ monitoring of transient oxygen radicals inside metal oxide powders.
RESUMO
Multimodal chromatography has emerged as a promising technique for antibody purification, owing to its capacity to selectively capture and separate target molecules. However, the optimization of chromatography parameters remains a challenge due to the intricate nature of protein-ligand interactions. To tackle this issue, efficient predictive tools are essential for the development and optimization of multimodal chromatography processes. In this study, we introduce a methodology that predicts the elution behavior of antibodies in multimodal chromatography based on their amino acid sequences. We analyzed a total of 64 full-length antibodies, including IgG1, IgG4, and IgG-like multispecific formats, which were eluted using linear pH gradients from pH 9.0 to 4.0 on the anionic mixed-mode resin Capto adhere. Homology models were constructed, and 1312 antibody-specific physicochemical descriptors were calculated for each molecule. Our analysis identified six key structural features of the multimodal antibody interaction, which were correlated with the elution behavior, emphasizing the antibody variable region. The results show that our methodology can predict pH gradient elution for a diverse range of antibodies and antibody formats, with a test set R² of 0.898. The developed model can inform process development by predicting initial conditions for multimodal elution, thereby reducing trial and error during process optimization. Furthermore, the model holds the potential to enable an in silico manufacturability assessment by screening target antibodies that adhere to standardized purification conditions. In conclusion, this study highlights the feasibility of using structure-based prediction to enhance antibody purification in the biopharmaceutical industry. This approach can lead to more efficient and cost-effective process development while increasing process understanding.
Assuntos
Anticorpos Monoclonais , Força Próton-Motriz , Cromatografia por Troca Iônica/métodos , Cromatografia , Imunoglobulina GRESUMO
Ion exsolution can be instrumental to engineer intergranular regions inside ceramic microstructures. BaO admixtures that were trapped inside nanometer-sized MgO grains during gas phase synthesis undergo annealing-induced exsolution to generate photoluminescent surface and interface structures. During their segregation from the bulk into the grain interfaces, the BaO admixtures impact grain coarsening and powder densification, effects that were compared for the first time using an integrated characterization approach. For the characterization of the different stages the materials adopt between powder synthesis and compact annealing, spectroscopy measurements (UV-Vis diffuse reflectance, cathodo- and photoluminescence [PL]) were complemented by an in-depth structure characterization (density measurements, X-ray diffraction [XRD], and electron microscopy). Depending on the Ba2+ concentration, isolated impurity ions either become part of low-coordinated surface structures of the MgO grains where they give rise to a characteristic bright PL emission profile around λ = 500 nm, or they aggregate to form nanocrystalline BaO segregates at the inner pore surfaces to produce an emission feature centered at λ = 460 nm. Both types of PL emission sites exhibit O2 gas adsorption-dependent PL emission properties that are reversible with respect to its pressure. The here-reported distribution of BaO segregates between the intergranular region and the free pore surfaces inside the MgO-based compacts underlines that solid-based exsolution strategies are well suited to stabilize nanometer-sized segregates of metal oxides that otherwise would coalesce and grow in size beyond the nanoscale.
RESUMO
Multimodal chromatography offers an increased selectivity compared to unimodal chromatographic methods and is often employed for challenging separation tasks in industrial downstream processing (DSP). Unfortunately, the implementation of multimodal polishing into a generic downstream platform can be hampered by non-robust platform conditions leading to a time and cost intensive process development. Mechanistic modeling can assist experimental process development but readily applicable and easy to calibrate multimodal chromatography models are lacking. In this work, we present a mechanistic modeling aided approach that paves the way for an accelerated development of anionic mixed-mode chromatography (MMC) for biopharmaceutical purification. A modified multimodal isotherm model was calibrated using only three chromatographic experiments and was employed in the retention prediction of four antibody formats including a Fab, a bispecific, as well as an IgG1 and IgG4 antibody subtype at pH 5.0 and 6.0. The chromatographic experiments were conducted using the anionic mixed-mode resin Capto adhere at industrial relevant process conditions to enable flow through purification. An existing multimodal isotherm model was reduced to hydrophobic interactions in the linear range of the adsorption isotherm and successfully employed in the simulation of six chromatographic experiments per molecule in concert with the transport dispersive model (TDM). The model reduction to only three parameters did prevent structural parameter non-identifiability and enabled an analytical isotherm parameter determination that was further refined by incorporation of size exclusion effects of the selected multimodal resin. During the model calibration, three linear salt gradient elution experiments were performed for each molecule followed by an isotherm parameter uncertainty assessment. Lastly, each model was validated with a set of step and isocratic elution experiments. This standardized modeling approach facilitates the implementation of multimodal chromatography as a key unit operation for the biopharmaceutical downstream platform, while increasing the mechanistic insight to the multimodal adsorption behavior of complex biologics.
Assuntos
Anticorpos Monoclonais , Cloreto de Sódio , Cromatografia por Troca Iônica/métodos , Simulação por Computador , Anticorpos Monoclonais/químicaRESUMO
The fate of photogenerated charges within ferroelectric metal oxides is key for photocatalytic applications. The authors study the contributions of i) tetragonal distortion, responsible for spontaneous polarization, and ii) point defects, on charge separation and recombination within BaTiO3 (BTO) nanocrystals of cubic and tetragonal structure. Electron paramagnetic resonance (EPR) in combination with O2 photoadsorption experiments show that BTO nanocrystals annealed at 600 °C have a charge separation yield enhanced by a factor > 10 compared to TiO2 anatase nanocrystals of similar geometries. This demonstrates for the first time the beneficial effect of the BTO perovskite nanocrystal lattice on charge separation. Strikingly, charge separation is considerably hindered within BTO nanoparticles annealed ≥ 600 °C, due to the formation of Ba-O divacancies that act as charge recombination centers. The opposing interplay between tetragonal distortion and annealing-induced defect formation inside the lattice highlights the importance of defect engineering within perovskite nanoparticles.
RESUMO
The development of biopharmaceutical downstream processes relies on exhaustive experimental studies. The root cause is the poorly understood relationship between the protein structure of monoclonal antibodies (mAbs) and their macroscopic process behavior. Especially the development of preparative chromatography processes is challenged by the increasing structural complexity of novel antibody formats and accelerated development timelines. This study introduces a multiscale in silico model consisting of homology modeling, quantitative structure-property relationships (QSPR), and mechanistic chromatography modeling leading from the amino acid sequence of a mAb to the digital representation of its cation exchange chromatography (CEX) process. The model leverages the mAbs' structural characteristics and experimental data of a diverse set of 21 therapeutic antibodies to predict elution profiles of two mAbs that were removed from the training data set. QSPR modeling identified mAb-specific protein descriptors relevant for the prediction of the thermodynamic equilibrium and the stoichiometric coefficient of the adsorption reaction. The consideration of two discrete conformational states of IgG4 mAbs enabled prediction of split-peak elution profiles. Starting from the sequence, the presented multiscale model allows in silico development of chromatography processes before protein material is available for experimental studies.
Assuntos
Anticorpos Monoclonais , Imunoglobulina G , Cromatografia por Troca Iônica/métodos , Termodinâmica , Imunoglobulina G/química , Anticorpos Monoclonais/química , AdsorçãoRESUMO
The analysis of data collected using design of experiments (DoE) is the current gold standard to determine the influence of input parameters and their interactions on process performance and product quality. In early development, knowledge on the bioprocess of a new product is limited. Many input parameters need to be investigated for a thorough investigation. For eukaryotic cell cultures, intensified DoE (iDoE) has been proposed as efficient tool, requiring fewer bioreactor runs by introducing setpoint changes during the bioprocess. We report the first successful application of iDoE to mammalian cell culture, performing sequential setpoint changes in the growth phase for the selected input parameters temperature and dissolved oxygen. The process performance data were analyzed using ordinary least squares regression. Our results indicate iDoE to be applicable to mammalian bioprocesses and to be a cost-efficient option to inform modeling early on during process development. Even though only half the number of bioreactor runs were used in comparison to a classical DoE approach, the resulting models revealed comparable input-output relations. Being able to examine several setpoint levels within one bioreactor run, we confirm iDoE to be a promising tool to speed up biopharmaceutical process development.
RESUMO
Powder compaction-induced surface chemistry in metal oxide nanocrystal ensembles is important for very diverse fields such as triboelectrics, tribocatalysts, surface abrasion, and cold sintering of ceramics. Using a range of spectroscopic techniques, we show that MgO nanocube powder compaction with uniaxial pressures that can be achieved by gentle manual rubbing or pressing (p ≥ 5 MPa) excites energetic electron-hole pairs and generates oxygen radicals at interfacial defect structures. While the identification of paramagnetic O- radicals and their adsorption complexes with O2 point to the emergence of hole centers, triboemitted electrons become scavenged by molecular oxygen to convert into adsorbed superoxide anions O2 - as measured by electron paramagnetic resonance (EPR). By means of complementary UV-photoexcitation experiments, we found that photon energies in the range between 3 and 6 eV produce essentially the same EPR spectroscopic fingerprints and optical absorption features. To provide insights into this effect, we performed density functional theory calculations to explore the energetics of charge separation involving the ionization of low-coordinated anions and surface-adsorbed O2 - radicals at points of contact. For all selected configurations, charge transfer is not spontaneous but requires an additional driving force. We propose that a plausible mechanism for oxygen radical formation is the generation of significant surface potential differences at points of contact under loading as a result of the highly inhomogeneous elastic deformations coupled with the flexoelectric effect.
RESUMO
The World Health Organization Classification of Tumours of Haematopoietic and Lymphoid Tissues (WHO 2017) included updated criteria for diagnosis and classification of post-transplant lymphoproliferative disorders (PTLDs). This study evaluated the clinicopathologic spectrum using WHO 2017 criteria and adult PTLD patients' outcomes over 30 years between 1987 and 2017 at Mayo Clinic (Rochester, MN). Patients were retrospectively reviewed for clinical features, outcomes, and diagnostic pathology material and classified based on WHO 2017 criteria. A total of 227 patients were diagnosed with PTLD, with a median time from transplant to PTLD of 45 months. PTLD occurred >1 year after transplant in 149 (66%) patients. Monomorphic PTLD was the most common subtype (173, 76%), with diffuse large B cell lymphoma as the commonest morphology (n = 137). Epstein-Barr virus was positive in 61% of total cases and 90% of PTLD that developed within 1 year from transplant. The median event-free survival (EFS) and overall survival for the entire cohort were 21 months (95% confidence interval [CI]: 9-35) and 82 months (95% CI: 39-115), respectively. The EFS or overall survival was not impacted by Epstein-Barr virus status but differed based on WHO subtypes and year of diagnosis. Management changed over time with increased use of rituximab or chemotherapy + immunosuppression reduction as initial therapy. When compared to the matched general population and de novo diffuse large B cell lymphoma, patients not achieving EFS 24 status (no progression/treatment or death within 24 mo of diagnosis) had a worse standardized mortality ratio 16.75 (95% CI: 13.91-20) versus SMR 1.72 (95% CI: 1.26-2.28) in those who achieved EFS24. Cause of death was mostly attributed to non-lymphoma-related causes in those achieving EFS 24.
RESUMO
Developing simple, inexpensive, and environmentally benign approaches to integrate morphologically well-defined nanoscale building blocks into larger high surface area materials is a key challenge in materials design and processing. In this work, we investigate the fundamental surface phenomena between MgO and water (both adsorption and desorption) with particles prepared via a vapor-phase process (MgO nanocubes) and a modified aerogel process (MgO(111) nanosheets). Through these studies, we unravel a strategy to assemble individual MgO nanoparticles into extended faceted single-crystalline MgO nanosheets and nanorods with well-defined exposed surfaces and edges. This reorganization can be triggered by the presence of H2O vapor or bulk liquid water. Water adsorption and the progressive conversion of vapor-phase grown oxide particles into hydroxides give rise to either one-dimensional or two-dimensional (1D or 2D) structures of high dispersion and surface area. The resulting Mg(OH)2 lamella with a predominant (001) surface termination are well-suited precursor structures for their topotactic conversion into laterally extended and uniform MgO(111) grain surface configurations. To understand the potential of polar (111) surfaces for faceting and surface reconstruction effects associated with water desorption, we investigated the stability of MgO(111) nanosheets during vacuum annealing and electron beam exposure. The significant surface reconstruction of the MgO(111) surfaces observed shows that adsorbate-free (111)-terminated surfaces of unsupported MgO nanostructures reconstruct rather than remain as charged planes of either three-fold coordinated O2- ion or Mg2+ ions. Thus, here we demonstrate the role water can play in surface formation and reconstruction by bridging wet chemical and surface science inspired approaches.
RESUMO
Nanostructured segregates of alkaline earth oxides exhibit bright photoluminescence emission and great potential as components of earth-abundant inorganic phosphors. We evaluated segregation engineering of Ca2+- and Ba2+-admixtures in sintered MgO nanocube-derived compacts. Compaction and sintering transform the nanoparticle agglomerates into ceramics with residual porosities of Φ = 24-28%. Size mismatch drives admixture segregation into the intergranular region, where they form thin metal oxide films and inclusions decorating grain boundaries and pores. An important trend in the median grain size evolution of the sintered bodies with dCa(10 at. %) = 90 nm < dBa(1 at. %) = 160 nm < dMgO = 250 nm â¼ dCa(1 at. %) = 280 nm < dBa(10 at. %) = 870 nm is rationalized by segregation and interface energies, barriers for ion diffusion, admixture concentration, and the increasing surface basicity of the grains during processing. We outline the potential of admixtures on interface engineering in MgO nanocrystal-derived ceramics and demonstrate that in the sintered compacts, the photoluminescence emission originating from the grain surfaces is retained. Interior parts of the ceramic, which are accessible to molecules from the gas phase, contribute with oxygen partial pressure-dependent intensities to light emission.
RESUMO
Atomic dispersion of dopants and control over their defect chemistry are central goals in the development of oxide nanoparticles for functional materials with dedicated electronic, optical or magnetic properties. We produced highly dispersed oxide nanocubes with atomic distribution of cobalt ions in substitutional sites of the MgO host lattice via metal organic chemical vapor synthesis. Vacuum annealing of the nanoparticle powders up to 1173â K has no effect on the shape of the individual particles and only leads to moderate particle coarsening. Such materials processing, however, gives rise to the electronic reduction of particle surfaces, which-upon O2 admission-stabilize anionic oxygen radicals that are accessible to UV/Vis diffuse reflectance and electron paramagnetic resonance (EPR) spectroscopy. Multi-reference quantum chemical calculations show that the optical bands observed mainly originate from transitions into 4 A2g (4 F), 4 T1g (4 P) states with a contribution of transitions into 2 T1g , 2 T2g (2 G) states through spin-orbit coupling and gain intensity through vibrational motion of the MgO lattice or the asymmetric ion field. Related nanostructures are a promising material system for single atomic site catalysis. At the same time, it represents an extremely valuable model system for the study of interfacial electron transfer processes that are key to nanoparticle chemistry and photochemistry at room temperature, and in heterogeneous catalysis.
RESUMO
Microstructure, structure, and compositional homogeneity of metal oxide nanoparticles can change dramatically during catalysis. Considering the different stabilities of cobalt and iron ions in the MgO host lattice [M. Niedermaier et al., J. Phys. Chem. C 123, 25991 (2019)], we employed MgO nanocube powders with or without transition metal admixtures for the oxidative coupling of methane (OCM) reaction to analyze characteristic differences in catalytic activity and sintering behavior. Undoped MgO nanocrystals exhibit the highest C2 selectivity and retain the nanocrystallinity of the starting material after 24 h time on stream. For the Co-Mg-O nanoparticle powder, which exhibits the highest activity and COx selectivity and where OCM-induced coarsening is strongest, we found that the Co2+ ions remain homogeneously distributed over the MgO lattice. Trivalent Fe ions migrate to the surface of Fe-Mg-O nanoparticles where they form a magnesioferrite phase (MgFe2O4) with a characteristic impact on catalytic performance: Fe-Mg-O is initially less selective than MgO despite its lower activity. An increase in C2 selectivity and a decrease in the CO2/CO ratio with time on stream are attributed to the increasing fraction of coarsened particles that become depleted in redox active Fe. Surface water is a by-product of the OCM reaction, favors mass transport across the particle surfaces, and serves as a sintering aid during catalysis. The characteristic changes in size and morphology of MgO, Co-doped, and Fe-doped MgO particles can be consistently explained by activity and C2 selectivity trends. The original morphology of the nanocubes as a starting material for the OCM reaction does not impact the catalytic activity.
RESUMO
Metal oxide nanocomposites are non-equilibrium solids and promising precursors for functional materials. Annealing of such materials can provide control over impurity segregation and, depending on the level of consolidation, represents a versatile approach to engineer free surfaces, particle-particle interfaces and grain boundaries. Starting with indium-magnesium-oxide nanoparticle powders obtained via injection of an indium organic precursor into the magnesium combustion flame and subsequent particle quenching in argon, we investigated the stability of the trivalent In3+ ions in the host lattice of MgO nanoparticles by determining grain growth, morphology evolution and impurity segregation. The latter process is initiated by vacuum annealing at 873â K and can be tracked at 1173â K on a time scale of minutes. In the first instance the surface segregated indium wets the nanoparticle interfaces. After prolonged annealing indium evaporates and leaves the powder via the gas phase. Resulting MgO nanocubes are devoid of residual indium, regain their high morphological definition and show spectroscopic fingerprints (UV Diffuse Reflectance and Photoluminescence emission) that are characteristic of electronically unperturbed MgO cube corner and edge features. The results of this combined XRD, TEM, and spectroscopy study reveal the parameter window within which control over indium segregation is used to introduce a semiconducting metal oxide component into the intergranular region between insulating MgO nanograins.
RESUMO
It is an important goal of computational biology to correctly predict the association state of a protein based on its amino acid sequence and the structures of known homologues. We have pursued this goal on the example of anthranilate phosphoribosyltransferase (AnPRT), an enzyme that is involved in the biosynthesis of the amino acid tryptophan. Firstly, known crystal structures of naturally occurring homodimeric AnPRTs were analyzed using the Protein Interfaces, Surfaces, and Assemblies (PISA) service of the European Bioinformatics Institute (EBI). This led to the identification of two hydrophobic "hot spot" amino acids in the protein-protein interface that were predicted to be essential for self-association. Next, in a comprehensive multiple sequence alignment (MSA), naturally occurring AnPRT variants with hydrophilic or charged amino acids in place of hydrophobic residues in the two hot spot positions were identified. Representative variants were characterized in terms of thermal stability, enzymatic activity, and quaternary structure. We found that AnPRT variants with charged residues in both hot spot positions exist exclusively as monomers in solution. Variants with hydrophilic amino acids in one hot spot position occur in both forms, monomer and dimer. The results of the present study provide a detailed characterization of the determinants of the AnPRT monomer-dimer equilibrium and show that analysis of hot spots in combination with MSAs can be a valuable tool in prediction of protein quaternary structures.
Assuntos
Antranilato Fosforribosiltransferase/química , Antranilato Fosforribosiltransferase/metabolismo , Bactérias/enzimologia , Domínios e Motivos de Interação entre Proteínas , Estrutura Quaternária de Proteína , Antranilato Fosforribosiltransferase/genética , Domínio Catalítico , Biologia Computacional , Cristalografia por Raios X , Modelos Moleculares , Mutação , Multimerização ProteicaRESUMO
For production of different monoclonal antibodies (mAbs), biopharmaceutical companies often use related upstream and downstream manufacturing processes. Such platforms are typically characterized regarding influence of upstream and downstream process (DSP) parameters on critical quality attributes (CQAs). CQAs must be monitored strictly by an adequate control strategy. One such process-related CQA is the content of host cell protein (HCP) which is typically analyzed by immunoassay methods (e.g., HCP-ELISA). The capacity of the immunoassay to detect a broad range of HCPs, relevant for the individual mAb-production process should be proven by orthogonal proteomic methods such as 2D gel electrophoresis or mass spectrometry (MS). In particular MS has become a valuable tool to identify and quantify HCP in complex mixtures. We evaluate up- and DSP parameters of four different biopharmaceutical products, two different process variants, and one mock fermentation on the HCP pattern by shotgun MS analysis and ELISA. We obtained a similar HCP pattern in different cell culture fluid harvests compared to the starting material from the downstream process. During the downstream purification process of the mAbs, the HCP level and the number of HCP species significantly decreased, accompanied by an increase in diversity of the residual HCP pattern. Based on this knowledge, we suggest a control strategy that combines multi product ELISA for in-process control and release analytics, and MS testing for orthogonal HCP characterization, to attain knowledge on the HCP level, clusters and species. This combination supports a control strategy for HCPs addressing safety and efficacy of biopharmaceutical products.
Assuntos
Anticorpos Monoclonais/isolamento & purificação , Células CHO/metabolismo , Proteínas/química , Animais , Anticorpos Monoclonais/genética , Anticorpos Monoclonais/metabolismo , Células CHO/química , Técnicas de Cultura de Células , Cricetinae , Cricetulus , Eletroforese em Gel Bidimensional , Ensaio de Imunoadsorção Enzimática , Fermentação , Espectrometria de Massas/métodos , ProteômicaRESUMO
We present results for the fluctuations of the displacement of a tracer particle on a planar lattice pulled by a step force in the presence of impenetrable, immobile obstacles. The fluctuations perpendicular to the applied force are evaluated exactly in first order of the obstacle density for arbitrarily strong pulling and all times. The complex time-dependent behavior is analyzed in terms of the diffusion coefficient, local exponent, and the non-Skellam parameter, which quantifies deviations from the dynamics on the lattice in the absence of obstacles. The non-Skellam parameter along the force is analyzed in terms of an asymptotic model and reveals a power-law growth for intermediate times.
RESUMO
The selection of optimized enzymes from gene libraries is important, both for basic and applied research. Here, we first describe the generation of plasmid-borne libraries using error-prone PCR and highly competent Escherichia coli cells. We then provide protocols for the use of these libraries for auxotrophic selection assays with E. coli and the extremely thermophilic bacterium Thermus thermophilus as hosts.
Assuntos
Enzimas/genética , Escherichia coli/crescimento & desenvolvimento , Thermus thermophilus/crescimento & desenvolvimento , Clonagem Molecular , DNA Bacteriano/análise , Enzimas/metabolismo , Escherichia coli/genética , Biblioteca Gênica , Engenharia de Proteínas , Thermus thermophilus/genéticaRESUMO
Reported cases of familial Antiglomerular basement membrane (anti-GBM) disease are extremely rare. The single gene mutations that may play a role in the development of familial anti-GBM disease are currently unidentified. While human leukocyte antigen (HLA)-DR15 is known to be associated with an increased risk of anti-GBM disease, HLA types in patients with familial anti-GBM disease have never been reported. We present a case of a 65-year-old woman with rapidly-progressive glomerulonephritis and pulmonary involvement, consistent with Goodpasture's syndrome. Two of her 15 siblings also had a history of anti-GBM disease during adolescence and both received a kidney transplant. Our patient and her siblings were smokers and had also had exposure to kerosene, a low-viscosity hydrocarbon. HLA testing was performed and showed identical HLA typing (0 of 6 HLA mismatch) as one of her brothers with anti-GBM disease. Interestingly, they both had HLA-DR15. Despite severe acute kidney injury requiring hemodialysis, the patient responded well to the standard therapy with cyclophosphamide, plasmapheresis, and systemic corticosteroids. At her 3-month follow-up visit, the patient's kidney functions had recovered, and hemodialysis was discontinued. Concluding, we illustrate an extremely rare familial anti-GBM disease involving 3 siblings with potential links of HLA-DR15 and environmental triggers with the development of familial anti-GBM disease.â©.