Rates of subacromial notching are low following reverse shoulder arthroplasty with a 135° inlay humeral component and a lateralized glenoid.

Background: Lateralization in reverse shoulder arthroplasty (RSA) decreases bony impingement and improves rotational range of motion, but has been theorized to increase the risk of subacromial notching (SaN). The purpose of this study was to evaluate the presence of SaN following RSA and its relationship with lateralization with a 135° inlay humeral component. The secondary purpose was to assess the association of SaN with functional outcomes. Methods: A retrospective review was performed from a multicenter prospectively collected database on patients who underwent primary RSA from 2015 to 2021. All RSAs were performed with a 135° inlay humeral component. SaN was defined as bony erosion with sclerotic margins on the undersurface of the acromion on final follow-up radiographs not present preoperatively. Postoperative implant positioning (inclination, distalization, and lateralization) were evaluated on minimum 1-year postoperative radiographs. Regression analyses were performed on implant and clinical variables to assess for risk factors. A separate analysis was performed to determine the association of SaN with clinical outcomes. Results: SaN was identified in 13 out of 442 shoulders (2.9%). Age, sex, body mass index, smoking status, diabetes mellitus, arm dominance had no relationship with SaN. Neither glenoid sided lateralization nor humeral offset were associated with SaN risk. Other implant characteristics such as distalization, glenosphere size, and postoperative inclination did not influence SaN risk. The presence of SaN did not affect patient-reported outcomes (American Shoulder and Elbow Surgeons: P = .357, Visual Analog Scale: P = .210) or range of motion. Conclusion: The rate of SaN is low and not associated with glenoid or humeral prosthetic lateralization when using a 135° inlay humeral component. When SaN occurs, it is not associated with functional outcomes or range of motion at short-term follow-up.

Posteroinferior Glenosphere Positioning is Associated with Improved Range of Motion Following Reverse Shoulder Arthroplasty with a 135° Inlay Humeral Component and Lateralized Glenoid.

BACKGROUND: Optimal glenosphere positioning in a lateralized reverse shoulder arthroplasty (RSA) to maximize functional outcomes has yet to be clearly defined. Center of rotation (COR) measurements have largely relied on AP radiographs which allow assessment of lateralization and inferior position, but ignore scapular Y radiographs which may provide an assessment of posterior and inferior position relative to the acromion. The purpose of this study was to evaluate the COR in the sagittal plane and assess the effect of glenosphere positioning with functional outcomes utilizing a 135° inlay stem with a lateralized glenoid. METHODS: A retrospective review was performed on a prospectively maintained multicenter database on patients who underwent primary RSA from 2015-2021 with a 135° inlay stem. The COR was measured on minimum 2-year postoperative sagittal plain radiographs using a perfect-circle fit method. A perfect circle was made on the glenosphere and the center was marked. From there, four measurements were made: 1) center to the inner cortex of the coracoid, 2) center to the inner cortex of the anterior acromion, 3) center to the inner cortex of the middle acromion, 4) center to the inner cortex of the posterior acromion. Regression analysis was performed to evaluate any association between the position of the COR relative to bony landmarks with functional outcomes. RESULTS: A total of 136 RSAs met the study criteria. There was no relation with any of the distances with outcome scores (ASES, VAS). In regards to range of motion (ROM), each distance had an effect on at least one parameter. The COR to coracoid distance had the broadest association with ROM with improvements in forward flexion (FF), external rotation (ER0), and internal rotation with arm at 90° (IR90) (p = <0.001, 0.031, <0.001; respectively). The COR to coracoid distance was also the only distance to affect the final FF and IR90. For every 1 mm increase in this distance, there was a 1.8° increase in FF and 1.5° increase in IR90 (ß = 1.78; 95% CI 0.85 - 2.72, p = <0.001, ß = 1.53; 95% CI 0.65 - 2.41, p = <0.001; respectively). CONCLUSION: Evaluating the COR following RSA in the sagittal plane suggests that posteroinferior glenosphere position may improve ROM when using a 135° inlay humeral component and a lateralized glenoid.

Robert H. Cofield, MD, Award for Best Oral Presentation 2023: Up to 8 mm of glenoid-sided lateralization does not increase the risk of acromial or scapular spine stress fracture following reverse shoulder arthroplasty with a 135° inlay humeral component.

BACKGROUND: Glenoid-sided lateralization in reverse shoulder arthroplasty (RSA) decreases bony impingement and improves rotational range of motion, but has been theorized to increase the risk of acromial or scapular spine fractures (ASFs). The purpose of this study was to assess if glenoid-sided lateralization even up to 8 mm increases the risk for stress fracture following RSA with a 135° inlay humeral component. METHODS: A retrospective review was performed from a multicenter prospectively collected database on patients who underwent primary RSA from 2015 to 2021. All RSAs were performed with a 135° inlay humeral component. Varying amounts of glenoid lateralization were used from 0 to 8 mm. Preoperative radiographs were reviewed for the presence of acromial thinning, acromiohumeral distance (AHD), and inclination. Postoperative implant position (distalization, lateralization, and inclination) as well as the presence of ASF was evaluated on minimum 1-year postoperative radiographs. Regression analyses were performed on component and clinical variables to assess for factors predictive of ASF. RESULTS: Acromial or scapular spine fractures were identified in 26 of 470 shoulders (5.5%). Glenoid-sided lateralization was not associated with ASF risk (P = .890). Furthermore, the incidence of fracture did not vary based on glenoid-sided lateralization (0-2 mm, 7.4%; 4 mm, 5.6%; 6 mm, 4.4%; 8 mm, 6.0%; P > .05 for all comparisons). RSA on the dominant extremity was predictive of fracture (odds ratio [OR] 2.21, 95% confidence interval [CI] 1.20-5.75; P = .037), but there was no relationship between patient age, sex, preoperative acromial thinning, or diagnosis and risk of fracture. Although there was no difference in mean postoperative AHD between groups (P = .443), the pre- to postoperative delta AHD was higher in the stress fracture group (2.0 ± 0.7 cm vs. 1.7 ± 0.7 cm; P = .015). For every centimeter increase in delta AHD, there was a 121% increased risk for fracture (OR 2.21, 95% CI 1.33-3.68; P = .012). Additionally, for every 1-mm increase in inferior glenosphere overhang, there was a 19% increase in fracture risk (P = .025). CONCLUSION: Up to 8 mm of glenoid-sided metallic lateralization does not appear to increase the risk of ASF when combined with a 135° inlay humeral implant. Humeral distalization increases the risk of ASF, particularly when there is a larger change between pre- and postoperative AHD or higher inferior glenosphere overhang. In cases of pronounced preoperative superior humeral migration, it may be a consideration to avoid excessive postoperative distalization, but minimizing bony impingement via glenoid-sided lateralization appears to be safe.

Reliability assessment of new radiographic scales to evaluate radiolucency and bony in-between fin growth of partially cemented all-polyethylene glenoid components.

BACKGROUND: Current methods available for assessment of radiolucency and in-between fin (IBF) growth of a glenoid component have not undergone interobserver reliability testing for an all-polyethylene fluted central peg (FCP) glenoid. The purpose of this study was to evaluate anteroposterior radiographs of an FCP glenoid component at ≥48 months comparing commonly used scales to a new method adapted to the FCP. Our hypothesis was that the new method would result in acceptable intra- and interobserver agreement and a more accurate description of radiographic findings. METHODS: We reviewed ≥48-month follow-up radiographs of patients treated with a primary aTSA using an FCP glenoid. Eighty-three patients were included in the review. Radiographs were evaluated by 5 reviewers using novel IBF radiodensity and radiolucency assessments and the Wirth and Lazarus methods. To assess intraobserver reliability, a subset of 40 images was reviewed. Kappa statistics were calculated to determine intra- and interobserver reliability; correlations were assessed using Pearson correlation. RESULTS: Interobserver agreement (κ score) was as follows: IBF 0.71, radiolucency 0.68, Wirth 0.48, and Lazarus 0.22. Intraobserver agreement ranges were as follows: IBF radiodensity 0.36-0.67, radiolucency 0.55-0.62, Wirth 0.11-0.73, and Lazarus 0.04-0.46. Correlation analysis revealed the following: IBF to Wirth r = 0.93, radiolucency to Lazarus r = 0.92 (P value <.001 for all). CONCLUSION: This study introduces a radiographic assessment method developed specifically for an FCP glenoid component. Results show high interobserver and acceptable intraobserver reliability for the method presented in this study. The new scales provide a more accurate description of radiographic findings, helping to identify glenoid components that may be at risk for loosening.

Clinical and radiographic outcomes following anatomic total shoulder arthroplasty utilizing an inset glenoid component at 2-year minimum follow-up: a dual center study.

BACKGROUND: Anatomic total shoulder arthroplasty (aTSA) is a successful and reproducible treatment for patients with painful glenohumeral arthritis. However, long-term outcomes using traditional onlay glenoid components have been tempered by glenoid loosening. Inset components have been proposed to minimize glenoid loosening by reducing edge-loading and opposite-edge lift-off forces with humeral translation. Successful short- and long-term outcomes have been reported while using inset glenoid implants. The current study is the largest study presenting a minimum of 2-year follow-up data following aTSA with an all-polyethylene inset glenoid component (Shoulder Innovations, Holland, MI, USA). METHODS: A dual center, retrospective review of patients undergoing aTSA using an Inset glenoid component by 2 fellowship-trained shoulder surgeons at 2 separate institutions from August, 2016, to August, 2019, was performed. Minimum follow-up was 2 years. Range of motion (ROM), visual analog scale (VAS) pain scores, Single Assessment Numeric Evaluation (SANE), and American Shoulder and Elbow Surgeons (ASES) scores were obtained. Radiographic outcomes, including central peg lucency and glenoid loosening, were assessed by 3 independent reviewers on the postoperative Grashey and axillary radiographs obtained at the final follow-up. RESULTS: Seventy-five shoulders were included for the final analysis. The mean age of the entire cohort was 64 (±11.4) years. Twenty-one (28%) glenoids were type A1, 10 (13.3%) were type A2, 13 (17.3%) were type B1, 22 (29.3%) were type B2, 6 (8%) were type B3, and 3 (4%) were type D. At a minimum follow-up of 24 months (mean: 28.7 months), a significant improvement in ROM in all planes was observed. Significant improvements in VAS (5.1-0.9, P < .001), SANE (39.5-91.2, P < .001), and ASES (43.7-86.6, P < .001) scores were observed. There were 4 (5.3%) cases of central peg lucency about the inset glenoid component and one (1.3%) case of glenoid loosening. No revisions were performed for glenoid loosening. CONCLUSION: At a minimum of 2 years postoperatively, there were significant improvements in ROM, VAS, SANE, and ASES scores with very low rates of central peg lucency and glenoid loosening in patients undergoing aTSA with an inset glenoid component. Further work is needed to determine the long-term benefit of this novel implant.

Stemless components lead to improved radiographic restoration of humeral head anatomy compared with short-stemmed components in total shoulder arthroplasty.

BACKGROUND: Restoring the native center of rotation (COR) in total shoulder arthroplasty (TSA) has been shown to improve postsurgical function, subjective outcomes, and implant longevity. The primary purpose of this study was to compare postoperative radiographic restoration of the humeral COR between short-stem and stemless humeral implants by evaluating the mean COR shift between the 2 techniques. Secondary outcomes evaluated were comparisons of COR shift outliers, humeral head implant thickness and diameter, direction of COR shift, and neck-shaft angle (NSA). METHODS: This study was a multicenter retrospective comparative study using a consecutive series of primary anatomic TSA patients who received either a short-stem or stemless humeral implant. Radiographically, COR and NSA were measured by 2 fellowship-trained surgeons using the best-fit circle technique on immediate postoperative Grashey radiographs. RESULTS: A total of 229 patients formed the final cohort for analysis that included 89 short stems and 140 stemless components. The mean COR shift for short stems was 2.7 mm (±1.4 mm) compared with 2.1 mm (±0.9 mm) for stemless implants (P < .001). The percentage of short-stem implant patients with a >2 mm COR difference from native was 66.0% (n = 62) compared with 47.4% (n = 64) for stemless (P = .006). The percentage of short-stem patients with a >4 mm COR difference from native was 17.0% (n = 16) compared with 3.0% (n = 4) for stemless (P < .001). The mean humeral implant head thickness for short stems was 18.7 ± 2.2 mm compared with 17.2 ± 1.3 mm for stemless implants (P < .001). The mean humeral head diameter for short stems was 48.7 ± 4.4 mm compared with 45.5 ± 3.5 mm for stemless implants (P < .001). The NSA for the short-stem cohort was 136.7° (±3.6°) compared with 133.5° (±6.0°) for stemless (P < .001). CONCLUSIONS: Stemless prostheses placed during TSA achieved improved restoration of humeral head COR and were less likely to have significant COR outliers compared with short-stem implants.

Patient reported outcomes and ranges of motion after reverse total shoulder arthroplasty with and without subscapularis repair.

Background: In performing reverse total shoulder arthroplasty (rTSA), the role of repairing the subscapularis has been debated. Our objective was to determine the effect of subscapularis repair following rTSA on postoperative shoulder ranges of motion and patient reported outcome scores (PROs). Methods: A prospective registry was reviewed to establish a cohort of primary rTSA patients with a 135-degree humeral implant, with a minimum of 2 years of follow-up. Variables collected included demographics, subscapularis repair information, diagnosis, glenosphere size, and glenoid lateralization information. Outcomes collected were range of motion measurements, subscapularis strength, and multiple generic and shoulder PROs. Multivariable linear regression models were created to predict these 2-year outcomes. Results: The 143-patient cohort had a mean age of 69 years with 68% of patients undergoing subscapularis repair. After adjustment in the multivariable models, whether the subscapularis was repaired did not significantly predict a 2-year forward elevation, external rotation, internal rotation, subscapularis strength, Western Ontario Osteoarthritis of the Shoulder score, VR-12 scores, Constant Score, or American Shoulder and Elbow Surgeons Shoulder Scores. Increased glenoid lateralization significantly predicted greater internal rotation, higher VR-12 physical score, and higher Constant Score. There were no dislocations in either group. Conclusions: After adjusting for patient and implant factors, subscapularis repair was not associated with a 2-year postoperative range of motion, strength, or any PROs suggesting that repairing the subscapularis may not affect functional outcome. Increased glenoid lateralization through the baseplate and glenosphere independently predicted better internal rotation, VR-12 physical score, and Constant Scores indicating a benefit to lateralization during rTSA.

A Comparison of Central Screw versus Post for Glenoid Baseplate Fixation in Reverse Shoulder Arthroplasty Using a Lateralized Glenoid Design.

The purpose of this study was to compare the short-term clinical and radiographic outcomes of a lateralized glenoid construct with either a central screw or post. Methods: A multicenter retrospective study was conducted of reverse shoulder arthroplasties (RSAs) with minimum 2-year clinical followup. All RSAs implanted had a 135° neck shaft angle (NSA) and a modular circular baseplate. The patients were divided into two cohorts based on the type of central fixation for their glenoid baseplates (central post (CP) vs. central screw (CS)). The clinical outcomes, rates of revisions, and available radiographs were evaluated. Results: In total, 212 patients met the study criteria. Postoperatively, both groups improved over their preoperative baseline. There were no significant differences between the cohorts in any PROs at 2 years postoperatively. No findings of gross loosening were identified in either cohort. Implant survival was 98.6% at 2 years. Conclusions: When using a lateralized glenoid implant with a 135° NSA inlay humeral component, both central post and central screw baseplate fixation provide good clinical outcomes, survivorship, and improvements in ROM at 2 years. There is no difference in loosening or revision rates between the types of baseplate fixation at a minimum of 2 years postoperatively.

Early clinical and radiographic outcomes of anatomic total shoulder arthroplasty with a biconvex posterior augmented glenoid for patients with posterior glenoid erosion: minimum 2-year follow-up.

BACKGROUND: Glenoid bone loss in anatomic total shoulder arthroplasty (aTSA) remains a controversial and challenging clinical problem. Previous studies have shown high rates of glenoid loosening for aTSA in shoulders with retroversion, posterior bone loss, and posterior humeral head subluxation. This study is the first to present minimum 2-year follow-up data of an all-polyethylene, biconvex augmented anatomic glenoid component for correction of glenoid retroversion and posterior humeral head subluxation. METHODS: This study is a multicenter, retrospective review of prospectively collected data on consecutive patients from 7 global clinical sites. All patients underwent aTSA using the biconvex posterior augmented glenoid (PAG). Inclusion criteria were preoperative computed tomographic (CT) scan, minimum 2 years since surgery, preoperative and minimum 2-year postoperative range of motion examination, and patient-reported outcome measures (PROMs). Glenoid classification, glenoid retroversion, and posterior humeral head subluxation were measured from preoperative CT and radiography and postoperative radiography. Statistical comparisons between pre- and postoperative values were performed with a paired t test. RESULTS: Eighty-six of 110 consecutive patients during the study period (78% follow-up) met the inclusion criteria and were included in our analysis. Mean follow-up was 35 ± 10 months, with a mean age of 68 ± 8 years (range 48-85). Range of motion statistically improved in all planes from pre- to postoperation. Mean visual analog scale score improved from 5.2 preoperation to 0.7 postoperation, Single Assessment Numeric Evaluation score from 43.2 to 89.5, Constant score from 41.8 to 76.9, and American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form score from 49.8 to 86.7 (all P < .0001). Mean glenoid retroversion improved from 19.3° to 7.4° (P < .0001). Posterior subluxation improved from 69.1% to 53.5% and posterior decentering improved from 5.8% to -3.0% (P < .0001). There was 1 patient with both a prosthetic joint infection and radiographic glenoid loosening that required revision. Seventy-nine of 86 patients had a Lazarus score of 0 (no radiolucency seen about peg or keel) at final follow-up. CONCLUSIONS: This study shows that at minimum 2-year follow-up, a posterior-augmented all-polyethylene glenoid can correct glenoid retroversion and posterior humeral head subluxation. Clinically, there was significant improvement in both range of motion and PROMs.

A comprehensive evaluation of the association of radiographic measures of lateralization on clinical outcomes following reverse total shoulder arthroplasty.

BACKGROUND: Although reverse total shoulder arthroplasty (RTSA) has excellent reported outcomes and satisfaction, patients often have postoperative limitations in range of motion (ROM), specifically internal rotation. Increased lateralization is thought to improve ROM following RTSA. The purpose of this study was to evaluate the association between radiographic measurements of lateralization and postoperative ROM and clinical outcome scores following RTSA. The authors hypothesized that increased radiographic lateralization would be associated with improved postoperative ROM, specifically internal rotation, but have no significant association with clinical outcome scores. METHODS: Patients who underwent RTSA with a 135° neck-shaft angle prosthesis and minimum 2-year clinical and radiographic follow-up were included and retrospectively reviewed. Postoperative radiographs were evaluated for several lateralization measurements including the lateralization shoulder angle (LSA), distance from the lateral border of the acromion to the lateral portion of the glenosphere, distance from the glenoid to the most lateral aspect of the greater tuberosity, and the distance from the lateral aspect of the acromion to the most lateral aspect of the greater tuberosity. Linear regression analyses were used to evaluate the independent association of each radiographic measurement of lateralization on forward flexion, external rotation, internal rotation, and the American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES) index score at 2 years postoperation. Receiver operating characteristic (ROC) curves were constructed to identify significant thresholds of each radiographic lateralization measurement. RESULTS: A total of 203 patients were included. For internal rotation, a greater LSA (P = .007), shorter acromion to glenosphere distance (meaning more glenoid lateralization) (P = .005), and a greater acromion to greater tuberosity distance (with the tuberosity more lateral to the acromion) (P = .021) were associated with improved internal rotation. Overall, ROC analysis demonstrated very little significant data, the most notable of which was the LSA, which had a significant cutoff of 82° (sensitivity 57%, specificity 68%, P = .012). CONCLUSION: Of the numerous radiographic measures of lateralization after RTSA, the LSA is the most significantly associated with outcomes, including improved internal rotation and a decrease in forward flexion and ASES score. The clinical significance of these statistically significant findings requires further study, as the observed associations were for very small changes that may not represent clinical significance.

Operative duration-based learning period analysis for reverse and total shoulder arthroplasty: A multicenter study.

BACKGROUND: A surgical learning period may be quantified after which operative duration is significantly reduced. We sought to retrospectively quantify and compare surgeon's learning experience for total shoulder arthroplasty and reverse shoulder arthroplasty. METHODS: We reviewed 2055 shoulder arthroplasty cases from 2011 to 2015 for four early-career and four later-career fellowship-trained shoulder surgeons from four institutions. We plotted consecutive case number versus operative time for each surgeon separately for total shoulder arthroplasty or reverse shoulder arthroplasty. Two-step regression approach was used to determine a plateau point or end of the learning period. Additionally, the mean annual volume of reverse shoulder arthroplasty and total shoulder arthroplasty for each surgeon was plotted against mean surgery duration. Early- and later-career surgeons were compared with regression analysis. RESULTS: Early-career surgeons demonstrated a significant decrease in operative time with increasing annual case volume for reverse shoulder arthroplasty (p = 0.01; m = -1.1) and total shoulder arthroplasty (p = 0.02; m = -0.8). Three of four early-career surgeons reached a plateau point for either reverse shoulder arthroplasty or total shoulder arthroplasty between 12 and 86 cases. CONCLUSION: For only early-career surgeons, higher case volume yields decreased operative duration, with improvement more pronounced for reverse shoulder arthroplasty compared to total shoulder arthroplasty. Though the learning period varies, it may be fewer than 90 cases.

Anatomic evaluation of radiographic landmarks for accurate straight antegrade intramedullary nail placement in the humerus.

BACKGROUND: Neurovascular insult, nonunion, and iatrogenic rotator cuff injury are concerns when using an intramedullary nail (IMN) for proximal humerus fracture. The purpose of this study was to identify a reproducible starting point and intraoperative imaging for nail insertion optimizing nail depth, tuberosity screw position, and protecting the axillary nerve and rotator cuff insertion. Our hypothesis was that a more medialized starting point would protect soft tissue structures and improve locking screw positioning. METHODS: Ten fresh-frozen cadavers underwent antegrade IMN with Grashey and modified lateral "precipice" view imaging. A guidewire was positioned medial to the coracoacromial ligament (CAL) in 5 cadavers and lateral to the CAL in 5. Distances from the nail entry point to anatomic landmarks were measured. Anatomic and histologic evaluations were performed, characterizing the nail perforation zone. Radiographs were compared between groups. RESULTS: The medial CAL group had a greater distance of screw fixation to the axillary nerve, a shorter distance of greater tuberosity (GT) screw fixation at the rotator cuff insertion on the infraspinatus and teres minor tubercles, and greater screw spread with improved lesser tuberosity capture. Two laterally placed implants violated the rotator cuff tendon. Imaging demonstrated that the ideal starting pin position was medial to the articular margin at a distance equal to the width of the rotator cuff insertion footprint. CONCLUSIONS: Medial placement optimized fixation of the GT, avoided violation of the rotator cuff tendon and footprint, and was associated with an increased distance of proximal locking screw to the axillary nerve.

Osseous changes following reverse total shoulder arthroplasty combined with latissimus dorsi transfer: a case series.

BACKGROUND: This is the first report on the incidence of proximal humerus osseous changes and associated clinical consequences in reverse total shoulder arthroplasty combined with a latissimus dorsi tendon transfer (RTSA+LDT). METHODS: A multicenter, retrospective review identified all patients who had undergone a primary RTSA+LDT and had at least 3-month radiographic follow-up between 2012 and 2017. Data collection included demographics, oral steroid use, repair technique for LDT fixation, radiographic humeral osseous changes, complications, and need for revision surgery. RESULTS: Twenty-four patients were included with an average age of 70.7 ± 7.9 years and follow-up of 16.3 (3-50) months. Ten patients (41.7%) developed osseous changes at the transfer location. There was no increased risk of developing osseous changes based on the surgical fixation technique (P = .421). Average time to earliest radiographic detection of osseous changes was 2.7 ± 1.7 months, with all changes occurring at or before 6 months. Two patients developed proximal humerus fractures, of which 1 had osseous changes through which the fracture occurred. DISCUSSION: RTSA+LDT may place the proximal humeral cortex at greater risk than previously described. Using a long-stem prosthesis in the setting of RTSA+LDT may limit the consequences of this complication.

Intramedullary Fixation for Proximal Humeral Fractures.

Proximal humeral fractures are a commonly encountered injury; however, no consensus has been reached for the ideal treatment. Current surgical fixation options include plate, plate with fibular strut allograft, intramedullary fixation, pinning, suture constructs, and external fixation. Each of these options possesses distinct advantages and disadvantages. With the evolution of implant design, a greater understanding of the mechanisms of failure of fixation, and the ability to preserve fracture biology, the management of proximal humeral fractures with intramedullary fixation has become an accepted treatment option. From a biomechanical perspective, intramedullary fixation may have advantages over laterally based fixation, in particular with fractures associated with significant calcar comminution. The ability to insert the implant from a superior starting point may help preserve vascular supply to the humeral head and tuberosities. With reported outcomes comparable with the aforementioned techniques and an evolving understanding of fracture characteristics and failures of fixation, intramedullary fixation represents an alternative treatment option for proximal humeral fractures with specific fixation and biologic advantages.

Traumatic Divergent Elbow Dislocation with Associated Forearm Amputation in an Adult: A Case Report.

CASE: A 49-year-old right-hand-dominant man sustained an auger-related injury that resulted in open dislocation at the left wrist and palm, with complete amputation of the distal aspect of the forearm and the hand. The injury at the elbow included instability with an ulnar coronoid fracture, posterior dislocation of the ulna, and posterolateral dislocation of the radius. To restore stability of the forearm stump and elbow, we performed a complete resection of the radius, open reduction and internal fixation of the coronoid tip, a repair of the lateral collateral ligament, and transfer of the distal biceps tendon to the coronoid. CONCLUSION: The procedure stabilized the elbow, allowing for early mobilization. The patient was eventually fitted with a prosthesis that allowed him to return to full-time manual labor in a rural setting.

An anthropometric analysis to derive formulae for calculating the dimensions of anatomically shaped humeral heads.

BACKGROUND: The elliptical shape of the humeral head has been vaguely described, but a more detailed mathematical description is lacking. The primary goal of this study was to create formulae to describe the mathematical relationships between the various dimensions of anatomically shaped humeral heads. METHODS: Three-dimensional computer models of 79 proximal humeri derived from computed tomography scans (white subjects, 47 male and 32 female; ages, 17-87 years) were studied. Linear regression analysis of the obtained humeral measurements was performed, and Pearson correlation coefficient (R) values were calculated. To substantiate the results of the linear regression analysis, Welch t-test was used to compare various parameters of small, medium, and large humeral heads. RESULTS: Formulae for calculating humeral head height, diameters of the base of the humeral head in the frontal and sagittal planes, and radii of curvature in the frontal and sagittal planes were derived from the linear regression plots that were found to have strong (1 ≥ R ≥ 0.50) correlations. By Welch t-test, differences between the 3 head sizes were statistically significant in each case (P ≤ .022). The elliptical shape of the base of the humeral head was found to elongate with increasing humeral head size. CONCLUSIONS: Mathematical formulae relating various humeral head dimensional measurements are presented. The formulae derived in this study may be useful for the design of future prosthetic shoulder systems in which the goal is to replicate normal anatomy. This is the first study to describe that the elliptical shape of the base of the humeral head elongates as head size increases.

Neurocognitive Deficits and Cerebral Desaturation During Shoulder Arthroscopy With Patient in Beach-Chair Position: A Review of the Current Literature.

Arthroscopic shoulder surgery with the patient in the beach-chair position (BCP) has been associated with neurocognitive complications caused by cerebral ischemia. We reviewed the current literature for the incidence of postoperative neurocognitive deficits, number of reported neurocognitive complications, and incidence of intraoperative cerebral desaturation events in patients who underwent arthroscopic shoulder surgery in the BCP. Among 10 studies with a composite enrollment of 24,701 patients, there was only 1 case of a postoperative neurocognitive deficit (overall incidence, 0.004%). Four case reports (not included in the 10 studies) described 6 patients with a catastrophic neurocognitive complication after shoulder surgery in the BCP. Incidence of reported intraoperative cerebral desaturation events varied significantly (0%-100%; mean, 41.1%). Neurocognitive complications have been reported in patients who had arthroscopic shoulder surgery in the BCP. Intraoperative monitoring of cerebral perfusion, alternatives to general anesthesia, and prudent use of intraoperative blood pressure control may improve patient safety.

Clinical outcomes in patients undergoing revision rotator cuff repair with extracellular matrix augmentation.

Outcomes following revision surgery for failed rotator cuff repairs are far less predictable than and are associated with decreased patient satisfaction compared with primary repairs. Extracellular matrix augmentation (ECM) may improve the biologic potential for healing during revision repair. The authors examined clinical outcomes and healing rates based on postoperative imaging of patients who underwent revision open rotator cuff repair with an ECM patch for symptomatic recurrent rotator cuff tear. Twenty-four (77%) of 31 patients with a mean follow-up of 50 months (range, 30-112 months) completed post-revision surgery outcome questionnaires at a mean of 5.3 years after revision surgery, and 16 patients (67%) underwent a physical examination and repeat imaging (ultrasound or magnetic resonance imaging) at a mean of 4.2 years after revision surgery. Ten (63%) of those 16 patients were found to have failed revision rotator cuff repair on imaging, with American Shoulder and Elbow Surgeons (ASES) outcome measures that were significantly (P=.04) better in patients with confirmed intact repairs than those with confirmed failed revision repair. Outcome measures for all patients (n=24) included a mean ASES score of 67.2 (SD, 27.9) and a mean Single Assessment Numeric Evaluation (SANE) score of 66.9 (SD, 26.0). Based on these scores, excellent results were achieved in 24% of patients, good in 13%, fair in 21%, and poor in 42%. Results of this investigation demonstrated that augmentation of revision rotator cuff repair with an ECM patch through an open approach showed no significant improvement in outcomes when compared to historical reports without augmentation.

Fixation of unstable type II clavicle fractures with distal clavicle plate and suture button.

This article reports on a technique to treat unstable type II distal clavicle fractures using fracture-specific plates and coracoclavicular augmentation with a suture button. Six patients with clinically unstable type II distal clavicle fractures underwent treatment using the above technique. All fractures demonstrated radiographic union at 9.6 (8.4-11.6) weeks with a mean follow-up of 15.6 (12.4-22.3) months. American Shoulder and Elbow Surgeons, Penn Shoulder Score, and Single Assessment Numeric Evaluation scores were 97.97 (98.33-100), 96.4 (91-99), and 95 (90-100), respectively. One patient required implant removal. Fracture-specific plating with suture-button augmentation for type II distal clavicle fractures provides reliable rates of union without absolute requirement for implant removal.

Cerebral desaturation during shoulder arthroscopy: a prospective observational study.

BACKGROUND: Patients undergoing arthroscopic shoulder surgery in the beach chair position may be at increased risk for serious neurocognitive complications as a result of cerebral ischemia. QUESTIONS/PURPOSES: We sought to define the (1) incidence; (2) timing; and (3) magnitude of intraoperative cerebral desaturation events (CDEs) in subjects undergoing arthroscopic shoulder surgery in the beach chair position, as well as whether (4) the length of surgery was an independent risk factor for intraoperative CDEs. METHODS: Regional cerebral tissue oxygen saturation (rSO2) was monitored intraoperatively using near-infrared spectroscopy on 51 consecutive patients undergoing arthroscopic shoulder surgery in the beach chair position. Intraoperative decreases in rSO2 of 20% or greater were defined as CDEs. RESULTS: The incidence of intraoperative CDEs in our series was 18% (nine of 51). Among the patients demonstrating CDE (n = 9), the mean time to onset of initial CDE was 18 minutes 38 seconds postinduction. Of those experiencing CDEs, the mean maximal decrease in rSO2 was 32% from preoperative baseline per patient. Additionally, the mean number of separate CDE instances was 1.89 in this patient population with an average duration of 3 minutes 3 seconds per instance. There was no statistically significant difference (p = 0.202) between patients demonstrating CDEs and those without in regard to length of surgery (95 versus 88 minutes). CONCLUSIONS: The degree and duration of cerebral ischemia required to produce neurocognitive dysfunction in this patient population remains undefined; however, cerebral oximetry with near-infrared spectroscopy allows prompt identification and treatment of decreased cerebral perfusion. We believe protocols aimed at detecting and reversing CDE may improve patient safety.