Extraction of phenolic compounds from walnut green husk (Juglans regia L.) by Salting-Out extraction method.

Some factors in the salting-out extraction (SOE) method play a major role. The aim of this study was to investigate the interaction effects of the phase forming components and consequently select the best conditions to achieve a highly efficient recovery of phenolic compounds from walnut green husks (Juglans regia L.) using mixtures of ethanol and aqueous ammonium sulfate solutions. According to the results that were analyzed by response surface methodology, the optimal extraction conditions were obtained at ethanol: salt: water ratio of 34.8: 15.1: 54.4 (w/w) at a pH of 6-6.5 and 25 °C. At the optimal conditions, the overall phenolic and flavonoid content, and antioxidant activity were significantly higher than obtained by the conventional method. In addition, at a higher scale (i.e., 5 kg), similar results were obtained. Thus, it can be concluded that SOE has the potential to be scaled up for the simultaneous separation and purification of compounds from plant biomass. This paper is addressing extraction techniques, measurement, and characterization of new natural phenolic compounds from an agricultural by-product and valorization of waste.

Self-assembly of Tween 80 micelles as nanocargos for oregano and trans-cinnamaldehyde plant-derived compounds.

The self-assembly of Tween 80 (T80) micelles loaded with plant-based oregano essential oil (OR) and trans-cinnamaldehyde (TCA) was studied. The effect of different factors, including the surfactant to oil ratio, the presence of sodium chloride, thermal treatment, and dilution on their formation and physicochemical stability was evaluated. The creation of nano-cargos was confirmed by TEM. The self-associated structures had z-average droplet diameters of 92 to 337 nm without any energy input. Whereas addition of 10% (w/v) NaCl prevented the formation of oregano essential oil nano-assemblies of T80, swollen micelles containing TCA were successfully produced. Moreover, the OR or TCA loaded-micelles had only a slight droplet size variation upon thermal treatment. Ultimately, their antibacterial activity analysis against some food pathogens revealed that the encapsulation of OR and TCA within micelles crucially improved their antibacterial activity. These straightforward and cost-effective designed systems can be applicable in different products, including foods and agrochemicals.

Characterization and enhanced functionality of nanoparticles based on linseed protein and linseed gum biocomplexes.

The formation, characterization, and functionality of hybrid nanoparticles based on linseed bio-macromolecules extracted as linseed protein (LP) and linseed gum (LG) from the remaining meal after oil extraction were investigated. The assembly of bioparticles at different protein to polysaccharide ratios as a function of pH was characterized in terms of absorbance measurements, dynamic light scattering and surface charge. The wettability of the assembled particles as well as the plain LP and LG was also determined. By increasing the LG proportion in the bioparticles, both the size of the particles and their contact angle tended to decrease, whereas their zeta potential became more negative over the whole studied pH range. The formed negatively charged particles at pH 3 with a 50:50 LP to LG ratio and a size of approximately 300 nm were selected and their functional properties (solubility, emulsifying and foaming properties) were compared to the individual biopolymers. The interaction between LG and LP was found to modify the functional properties of native LP especially at and around its isoelectric point. The LP-LG particles could be useful for stabilizing plant-based emulsions and foams.

Maillard conjugation of whey protein isolate with water-soluble fraction of almond gum or flaxseed mucilage by dry heat treatment.

The Maillard conjugation of whey protein isolate (WPI) by dry heat treatment (74% relative humidity at 60 °C) to either the water-soluble fraction of almond gum (SFAG) or flaxseed mucilage (SFM) was compared. Depending on the protein to polysaccharide ratio, carbohydrate type, and incubation time, different degrees of substitutions of the amino groups were obtained. The characterization of the conjugates by TNBS, SDS-PAGE, size exclusion chromatography, and circular dichroism analysis confirmed the formation of conjugates. SFAG was found to have less tendency for the formation of grafted WPI than SFM, which could be attributed to both the polysaccharide composition and/or a higher molecular weight. Ultimately, the emulsions stabilized by conjugates (pH 5.0 and 6.5) remained homogenous with no droplet size variation after heating, indicating that the conjugation of WPI to SFAG and SFM substantially improved its heat stability.

Effect of thymol and Pickering stabilization on in-vitro digestion fate and oxidation stability of plant-derived flaxseed oil emulsions.

The aim of this study was to evaluate the effect of Pickering stabilization by biopolymer-based particles (bioparticles), consisting of flaxseed protein and polysaccharides, and of the addition of thymol to the oil phase on the oxidation stability, and digestion fate of flaxseed oil (FO) emulsions, compared to bulk FO and conventional emulsions stabilized by polysorbate 80 (PS80). Applying Pickering stabilization and thymol simultaneously was a successful approach to retard FO oxidation. Moreover, lipid digestion was slower in bioparticle-stabilized emulsions compared to PS80 stabilized emulsions. The thymol bioaccessibility increased after incorporation into FO Pickering emulsions in comparison to the bulk oil. The results suggested that the combination of Pickering stabilization and thymol addition to the oil phase can be used as a promising way of protecting highly unsaturated oils such as FO against oxidation. These emulsions are also applicable for designing functional foods with controlled lipid digestion.

Bioparticles of flaxseed protein and mucilage enhance the physical and oxidative stability of flaxseed oil emulsions as a potential natural alternative for synthetic surfactants.

Flaxseed protein (FP) and mucilage (FM) complex bioparticles as sustainable ingredients were assembled by electrostatic interaction for plant-based Pickering stabilization of flaxseed oil (FO)-in-water emulsions. The effect of FO content (1-5 wt%) on droplet size and accelerated creaming stability of the emulsions was evaluated, from which it was found that 2.5 wt% FO emulsion had the smallest initial droplet size (i.e. D[4,3] = 8 µm) and creaming velocity (2.9 µm/s). The microstructure of the emulsions was observed using Cryo-SEM, confocal and optical microscopy, showing a thick layer of the particles on the oil surface responsible for the stabilization. The physical stability of FO emulsions stabilized by complex bioparticles against various environmental stress conditions (pH, salt and temperature) was higher compared to plain FP- and polysorbate 80-stabilized emulsions. Thus, the droplet size of FP-stabilized emulsions (pH 3) increased from 21 to 38 µm after thermal treatment (80 °C), whereas the size distribution of particle-stabilized emulsions hardly changed. The latter emulsions also remained stable during 28 days of storage and displayed good stability against a wide range of pH conditions (2-9) and salt concentrations (0-500 mM) with no sign of oiling-off. The complex particles as Pickering emulsifiers were successful to depress the FO oxidation at 4 °C and 50 °C. This study could open a promising pathway for producing natural and surfactant-free emulsions through Pickering stabilization using plant-based biopolymer particles for protecting lipophilic bioactive components.

Fundamental Study on the Salt Tolerance of Oregano Essential Oil-in-Water Nanoemulsions Containing Tween 80.

This study provides fundamental information about the influence of salt on the physicochemical stability of oregano essential oil (EO) and its main components incorporated in a nanoemulsion delivery system containing Tween 80 (T80) emulsifier. The emulsion stability was found to be strongly correlated with the lipid phase composition and the type of salts. The oregano essential oil nanoemulsions remained stable for several weeks in the absence of salts. Moreover, they were insensitive to tetrabutylammonium bromide, whereas similar to carvacrol emulsions, they exhibited a rapid phase separation and oiling-off in the presence of sodium chloride. On the other hand, high oleic sunflower oil (HOSO) and p-cymene emulsions remained stable in the presence of NaCl. Addition of 70 and 80% HOSO to the lipid phase of oregano EO and carvacrol, respectively, was found to be sufficient for the formation of emulsions with a high stability to 1.7 M NaCl. Hereby, the morphology of the oregano EO emulsions after 30 days of storage in the presence of NaCl was visualized using a transmission electron microscope. The determination of the surface load and area per surfactant molecule by interfacial tension (IFT) measurements and quartz crystal microbalance with dissipation revealed the dehydration of the polyoxyethylene groups of T80 in the presence of salt. The thickness of the T80 adsorbed layer onto solid hydrophobic and hydrophilic surfaces was significantly lower (p < 0.05) in the presence of sodium chloride. It is hypothesized that a combination of Ostwald ripening and coalescence due to an IFT increase and dehydration was responsible for the instability of the emulsions containing the more polar oregano EO and carvacrol in the presence of salt. The results obtained in this study could be useful for the formulation of essential oil nanoemulsions in the presence of salts applicable in food, pharmaceutical, and personal care products.

Production of thymol nanoemulsions stabilized using Quillaja Saponin as a biosurfactant: Antioxidant activity enhancement.

Thymol oil-in-water nanoemulsions as a potential natural alternative for synthetic antioxidant agents were developed. The nanoemulsions were formulated using Quillaja Saponin bio-surfactant and green solvents including high oleic sunflower oil (HOSO), tricaprylin (TC), and cinnamaldehyde (CA). The 4% thymol nanoemulsions containing TC and HOSO remained stable during long-term storage (at least 30 d). The antioxidant activity (AA) of free thymol and thymol nanoemulsions was compared with butylated hydroxytoluene (BHT) and ascorbic acid. The results obtained from DPPH, FRAP, and CUPRAC antioxidant assays showed a substantial improvement (p < 0.05) of the AA of free thymol through emulsification. The outcomes from the AA of the nanoemulsions in raw chicken breast meat measured by the TBARS assay revealed a significant improvement (p < 0.05) of the AA when thymol was encapsulated. These nanoemulsions may be applicable in the food industry as well as in cosmetic and health care products.

Self-assembly, functionality, and in-vitro properties of quercetin loaded nanoparticles based on shellac-almond gum biological macromolecules.

Quercetin-fortified nanoparticles were prepared from almond gum (AG), a novel biological macromolecule, and Tween 80 (T80) as stabilizers and shellac (SH) as core material using an antisolvent precipitation method. The final nanoparticles were prepared by 0.67% SH, 0.02% Q, 0.5% AG and 0.1% w/v T80 using the stirring speed of 750 rpm at a dosing rate of 0.5 ml/min. The morphology of the particles was characterized using Cryo-SEM and TEM microscopy. The average particle size was 135 ±â€¯8 nm with a polydispersity index of 0.252 ±â€¯0.01 and an encapsulation efficiency of 97.7 ±â€¯1.2%. At pH 7.4 (intestinal pH), quercetin-loaded nanoparticles showed significantly (p < 0.05) higher antioxidant activity compared to free quercetin while the degradation of quercetin was lower in the nanoparticles compared to free quercetin at the similar pH. Quercetin loaded in nanoparticles was successfully found to be 2 times more available for uptake than free quercetin at pH 7.4. MTT and SRB assays revealed that no significant (p > 0.05) toxicity was observed for Caco-2 cells treated with quercetin-loaded nanoparticles with a dilution factor of 100. This study provides information about the formulation of promising nanocarriers using biological macromolecules for oral delivery of bioactive compounds.

Influence of non-ionic emulsifier type on the stability of cinnamaldehyde nanoemulsions: A comparison of polysorbate 80 and hydrophobically modified inulin.

Cinnamaldehyde nanoemulsions were formulated to enable its application in an aqueous environment. The pure cinnamaldehyde nanoemulsions, stabilized by polysorbate 80 (at concentrations >0.5%), had both a higher stability and smaller droplet size, whereas the emulsions containing hydrophobically modified inulin (HMI) formed a colloidal dispersion with larger particle size. Incorporation of sunflower oil (SO) allowed postponement of Ostwald ripening for a sufficiently long period of time (at least 60 days). Cryo-SEM and droplet size analyses of the nanoemulsions emulsified by HMI revealed no significant changes during storage. Under these conditions, HMI as an emulsifier exhibited a powerful resistance to high salt contents (up to 2 M) and high thermal processing temperatures (90 °C). The surfactant type and SO content had no marked influence on the antimicrobial activity of the nanoemulsions. This study provides precious information for a commercial formulation of nanoemulsions with durable physical stability under severe stress conditions.