RESUMO
Background and Aim: Oxidative stress markers have been firmly established as elevated in oral squamous cell carcinomas (OSCCs). These markers play a crucial role in the pathogenic mechanism underlying the accumulation of advanced glycation end products (AGEs) and their respective receptors. The primary objective of this study is to discern and compare the levels of receptors of AGEs (RAGEs) within tissue samples from patients diagnosed with oral submucous fibrosis (OSMF) at varying stages, oral leukoplakia at various stages, and OSCC. Materials and Methods: A cross-sectional investigation was conducted, enrolling a total of 49 patients, distributed across three distinct groups. Tissue samples were meticulously collected from the aforementioned patient groups. Subsequently, these samples underwent a process of homogenization and centrifugation. The supernatant obtained was subjected to enzyme-linked immunosorbent assay analysis to precisely determine the concentration of RAGE. Results: The concentration of RAGEs was found to be significantly higher at various stages of OSMF when compared to the reference group of OSCC (P < 0.05). This difference was statistically significant, indicating a substantial association. In contrast, the levels of RAGE in patients with hyperkeratosis accompanied by epithelial dysplasia at various stages were observed to be lower than those in the OSCC group, with the difference in concentration being statistically insignificant (P > 0.05). Conclusion: This comprehensive study has provided compelling evidence demonstrating the heightened levels of RAGE in OSMF when compared to OSCC. These findings collectively suggest the potential utility of anti-RAGE interventions as a promising avenue for novel therapeutic strategies in potentially malignant disorders such as OSMF.
RESUMO
Introduction Whitlockite (WH), a rare phosphate mineral within the apatite group, shows potential for bone regeneration owing to its superior composition and biocompatibility compared to hydroxyapatite. It can serve as a carrier for bioactive molecules, gradually releasing them to stimulate bone growth and expedite healing. This study aims to assess the biocompatibility of antibiotic-loaded WH, focusing on ampicillin, for bone regeneration applications. Methodology WH particles loaded with varying concentrations of ampicillin (10 and 25 mM) underwent biocompatibility assessments using the MTT assay. One gram of particles was incubated in 10 mL of culture medium for 24 and 48 hours. Experimental groups included control, WH, WH with ampicillin at 10 mM (WH+A10), WH with ampicillin at 25 mM (WH+A25), and positive control treated with 0.1% Triton X detergent. Subsequently, after a three-day culture period, RunX2 gene expression, indicative of osteoblastic differentiation, was quantified using real-time PCR analysis. Results Our research evaluated the bioactivity of WH particles treated with human osteoblastic cells using the MTT assay. While 10 mM ampicillin-loaded WH showed no significant difference in metabolic activity at both 24 and 48 hours, 25 mM ampicillin-loaded WH exhibited a slight reduction in metabolic activity at 24 hours, which normalized by 48 hours. Additionally, we assessed osteogenic potential and showed a significant increase in RunX2 expression with ampicillin-loaded WH, indicating sustained osteogenic properties. Conclusions Our study underscores the promising biocompatibility of WH particles by retaining their osteogenic properties even when, loaded with ampicillin, offering a potential avenue for future bone regeneration strategies.
RESUMO
Background The use of surface coatings to enhance the properties lacking in titanium has attracted significant focus in recent times. Hafnium nitride (HfN) coatings could be explored as promising in the osteoinductive properties of titanium implants. HfN exhibits excellent mechanical attributes, such as hardness and wear resistance, and is often used as a coating on high-end equipment for protection. The findings from this research may carve a new path for the production and optimization of HfN coatings to enhance the longevity and augment properties of implant materials. Thus, the present study was orchestrated to elucidate the surface morphology of HfN coating, ultimately contributing to the advancement of dental implant biomaterials. Materials and methods A total of twenty samples of medical grade commercially pure titanium screws (2 mm diameter and 7 mm length) were procured from G. R. Bioure Surgical System Pvt. Ltd., Ravali, Uttar Pradesh, India, and ten samples were reacted with HfN (0.1 M) (Nano Research Elements, Kurukshetra, Haryana, India) in 100% ethanol and stirred continuously for about 48 hours. Then these screw samples were immersed in the prepared colloidal suspension and sintered for two hours at 400 degrees centigrade. The implant screws were affixed onto metal supports. The magnifications for photomicrographs at ×30, ×200, ×1,500, ×3,000, and ×5,000 were standardized. Elementary semi-quantitative analysis of both dental implants was conducted using energy-dispersive X-ray spectrometry (EDX) coupled with the field emission scanning electron microscope (FE-SEM) equipment (JEOL Ltd., Akishima, Tokyo, Japan). The software used for the analysis of the obtained images is SEM Center. Results The surface analysis using the scanning electron microscope (SEM) showed the coating of HfN over titanium screws. The difference in surface morphology of both the group of implant screws can be visualized under 40.0 and 10.0 mm working distance (WD) for both groups. The surface analysis using the EDX of uncoated titanium screws shows five elements in the spectrum: titanium (Ti), oxygen (O), aluminum (Al), carbon (C), and vanadium (V). The EDX of the HfN-coated screws has two additional metals dispersed in the spectrum, hafnium (Hf). The element characteristics are tabulated with their apparent concentration, k ratio, line type, weight percentage, standard label, and factory label for uncoated titanium screws and HfN-coated titanium screws. Conclusion The study evaluated HfN coating over medical grade commercially pure titanium. The surface topography of coated versus uncoated was visualized. The scanning electron microscope (SEM) images showed a homogenous coating over the titanium surfaces, and the EDX showed elemental dispersion of the coated implant. The study aims to provide a comprehensive understanding of the coating's surface morphology, which will aid in the development of more durable and biocompatible implants. This thereby provides a promising scope for further research of this novel metal coating for use in the biomedical sectors, specifically for dental implants.
RESUMO
Background Varied surface coatings have been studied time and again in medical sciences. Whether general or dental, studying the performance of coatings aims to assess their potential to improve the durability and longevity of titanium implants, thereby advancing implant technology for enhanced patient outcomes. Various analytical techniques are utilized to assess the performance of the coating, providing insights into its effectiveness in preventing corrosion. The findings of this evaluation will contribute to our understanding of corrosion mitigation strategies for titanium implants and pave the way for the development of more durable implant materials. This article aims to evaluate the corrosion resistance of an innovative metal compound coating applied over titanium implants. Materials and methods In this study, a total of 20 medical-grade, commercially pure titanium screws were collected. The dimensions of the titanium screws were 2mm x 7mm. Around 10 of these commercially pure titanium screw samples were used as the control group. Hafnium nitride (HfN) (0.1 M) was mixed with 100% ethanol and stirred using a glass rod for about 48 hours. Then 10 of the implant screw samples were immersed in the prepared sol and sintered at 400o C for two hours. The HfN-coated samples were then used as the test group. The corrosion resistance of both groups was tested using electrochemical impedance spectroscopy and potentiodynamic polarization studies. The Nyquist, Bode impedance, and Bode phase angle plots were obtained and studied. Results Using the Stern-Geary equation, the corrosion current density was calculated. On analysis, these values indicated that the higher impedance in HfN-coated titanium screws showed higher mean corrosion potential (Ecorr = -0.452 V) and corrosion current density ( icorr = 0.0354 µA/cm2) than the uncoated titanium screws. Conclusion It was concluded that the corrosion properties of HfN-coated titanium screws had higher impedance and consequently the highest corrosion resistance. This thereby provides a promising scope for further research of this novel metal coating for use in the biomedical sectors, specifically for dental implants.
RESUMO
The direct engagement of hafnium (Hf) in biological processes or its critical function in living things is not well understood as of now. Unlike key elements like oxygen, carbon, hydrogen, and nitrogen, which are necessary for life, Hf is not known to have any biological activities or functions. It is essential to acknowledge that scientific research is ongoing and that new findings may have been made. This systematic review aimed to aggregate and analyze the studies that discuss biomedical applications of Hf metal. This systematic review was conducted following the guidelines of the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) Statement. The following search strategy was used: two independent researchers conducted electronic searches in databases including PubMed, Embase, Cochrane Database of Systematic Reviews, and Google Scholar. The search was conducted up to August 2023 using the Medical Subject Headings (MeSH) terms "transition elements," "hafnium," and "biomedical research." Boolean operators "AND" and "OR" were used to refine the search. Electronic databases, along with hand searches, identified a total of 38 studies. The various database searches resulted in a total of 38 studies, of which 12 were excluded as duplicates, and five were unavailable for full-text data. The remaining 21 full-text articles were then assessed for their eligibility based on the inclusion and exclusion criteria, and finally, a total of 12 studies were included in the present systematic review. Among the 12 chosen studies, six were on cancer-related targeted radiotherapy or chemoradiotherapy, five were on bone or apatite-forming capabilities, and one was on the treatment of inflammatory bowel disease. The common outcome measures included cell proliferation, osteoblast formation, radiotherapy intensification, and immunotherapy. This review outlines an overall picture of the biomedical uses of Hf metal, a transition element, as a potent biomaterial. In conclusion, this transition element, Hf, has some promising scope in the fields of biomedicine, with a special focus in terms of cancer radiotherapy and osteogenic capabilities.
RESUMO
Collagen is a highly abundant protein in the extracellular matrix of humans and mammals, and it plays a critical role in maintaining the body's structural integrity. Type I collagen is the most prevalent collagen type and is essential for the structural integrity of various tissues. It is present in nearly all connective tissues and is the main constituent of the interstitial matrix. Mutations that affect collagen fiber formation, structure, and function can result in various bone pathologies, underscoring the significance of collagen in sustaining healthy bone tissue. Studies on type 1 collagen have revealed that mutations in its encoding gene can lead to diverse bone diseases, such as osteogenesis imperfecta, a disorder characterized by fragile bones that are susceptible to fractures. Knowledge of collagen's molecular structure, synthesis, assembly, and breakdown is vital for comprehending embryonic and foetal development and several aspects of human physiology. In this review, we summarize the structure, molecular biology of type 1 collagen, its biomineralization and pathologies affecting bone.
Assuntos
Colágeno Tipo I , Osteogênese Imperfeita , Animais , Humanos , Colágeno Tipo I/genética , Colágeno Tipo I/metabolismo , Calcificação Fisiológica/genética , Colágeno/metabolismo , Osteogênese Imperfeita/genética , Osso e Ossos , Mutação , Mamíferos/metabolismoRESUMO
Bone tissue engineering (BTE) is an emerging interdisciplinary field that aims to develop new strategies and materials for repairing, regenerating, or replacing damaged bone tissues. This field combines engineering, biology, and medicine principles to create functional bone tissues in the laboratory and in vivo. The main goal of BTE is to create biological substitutes that mimic the structure, function, and properties of natural bone tissue, thereby promoting the regeneration of bone defects caused by trauma, disease, or aging. In this study, we developed a biocomposite membrane using magnesium-chitosan, carboxymethyl cellulose, and alginate through a simple cast drying method. The biocompatibility of the membrane was evaluated using human osteoblastic cells, and it was found to be nontoxic to these cells. Both metabolic activity measurements (24 and 48 hours) and the lactate dehydrogenase release assay (72 hours) indicated that the membrane was biocompatible and did not exert significant toxic effects. These results suggest that the developed biocomposite membrane has the potential to be used as a safe and effective biomaterial for various biomedical applications, such as BTE, wound healing, and drug delivery. Further studies are warranted to explore the full potential of this membrane and its performance in different biological environments.
Assuntos
Anestésicos , MicroRNAs , Neoplasias , Humanos , MicroRNAs/genética , Neoplasias/genética , Neoplasias/cirurgia , Resultado do TratamentoRESUMO
This study delves into the potential of chito-oligosaccharides (COS) to promote osteoblast differentiation and prevent osteoporosis, utilizing experiments with mouse MSCs and the zebrafish model. The preliminary biocompatibility study affirms the non-toxic nature of COS across various concentrations. In the osteoblast differentiation study, COS enhances ALP activity and calcium deposition at the cellular level. Moreover, COS induces the upregulation of molecular markers, including Runx2, Type I collagen, ALP, osteocalcin, and osteonectin in mouse MSCs. Zebrafish studies further demonstrate COS's anti-osteoporotic effects, showcasing its ability to expedite fin fracture repair, vertebral mineralization, and bone mineralization in dexamethasone-induced osteoporosis models. The scale regenerative study reveals that COS mitigates the detrimental effects of dexamethasone induced osteoclastic activity, reducing TRAP and hydroxyproline levels while elevating the expression of Runx2a MASNA isoform, collagen2α, OC, and ON mRNAs. Additionally, COS enhances calcium and phosphorus levels in regenerated scales, impacting the bone-healthy calcium-tophosphorus ratio. The study also suggests that COS modulates the MMP3-Osteopontin-MAPK signaling pathway. Overall, this comprehensive investigation underscores the potential of COS to prevent and treat osteoporosis. Its multifaceted cellular and molecular effects, combined with in vivo bone regeneration and repair, propose that COS may be effective in addressing osteoporosis and related bone disorders. Nonetheless, further research is imperative to unravel underlying mechanisms and optimize clinical applications.
Assuntos
Quitosana , Osteoporose , Camundongos , Animais , Peixe-Zebra/metabolismo , Quitosana/metabolismo , Cálcio/metabolismo , Osteogênese , Osteoporose/metabolismo , Diferenciação Celular , Dexametasona/farmacologia , Osteoblastos , Fósforo/metabolismoRESUMO
INTRODUCTION: Calcium silicate-based types of cement have gained recognition in various dental applications due to their exceptional sealing capabilities, bioactivity, and minimal adaptability. However, these materials have certain shortcomings that can lead to mechanical failures and premature degradation. The inclusion of metal ions into their structure is expected to promote their biological activity. This article focuses on the preparation and characterization of calcium silicate cement to enhance its fundamental material properties, by introducing zinc and silver while retaining its biomaterial characteristics. AIM: This study aims to evaluate the biomedical potential of zinc and silver-impregnated bioactive calcium silicate cement. MATERIALS AND METHODS: The calcium silicate powder was synthesized via the sol-gel method. Tetraethyl orthosilicate, calcium nitrate, silver nitrate, and zinc nitrate were sequentially added to create the bioactive calcium silicate material. The synthesized particles underwent physicochemical characterization using techniques such as scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and biological characterization through in vitro hemocompatibility assays. RESULTS: The study's results revealed the presence of multiple crystalline phases (Ag6Si2O7, Zn2SiO4, CaCO3) as indicated by X-ray diffraction. Raman spectra displayed vibrations associated with Si-O-Si and Zn-O bonding in the zinc and silver-infused bioactive calcium silicate. Scanning electron microscopy confirmed a mixture of spherical and sheet-like morphologies, while energy dispersive spectra confirmed the presence of elements Ca, Si, Zn, Ag, O, and C. In vitro hemocompatibility testing affirmed the material's biocompatible nature. CONCLUSION: In conclusion, the zinc and silver-infused calcium silicate cement was successfully synthesized through an in-house procedure and demonstrated biocompatibility. The inclusion of zinc and silver, known for their osteogenic and antimicrobial properties, is anticipated to enhance the cement's biological properties and broaden its utility in dentistry. Further in vitro and in vivo investigations are imperative to validate its clinical applications and elucidate the molecular mechanisms underlying its efficacy.
RESUMO
OBJECTIVE: This study aimed to compare the wear resistance and color stability of fixed dental prostheses (FDPs) fabricated using two different materials: zirconia veneered with feldspathic porcelain and polyetheretherketone (PEEK) veneered with indirect composite. The assessment included samples subjected to thermocycling and wear simulation. METHODS: Two groups of FDPs were examined: one made of zirconia veneered with feldspathic porcelain (control and thermocycled) and the other made of PEEK veneered with indirect composite (worn and thermocycled). The samples were evaluated for wear resistance, antagonist wear, and color stability. Computer-aided design (CAD) software and a digital spectrophotometer were used for analysis. RESULTS: Zirconia veneered with porcelain demonstrated higher wear resistance compared to PEEK veneered with indirect composite. PEEK veneered with indirect composite exhibited significantly lower antagonist wear, indicating a protective effect on opposing teeth. There was no significant difference in color stability between the two groups, even after subjecting them to thermocycling and wear simulation. CONCLUSION: The study concludes that FDPs fabricated with PEEK veneered with indirect composite may have lower wear resistance compared to zirconia veneered with porcelain. However, PEEK FDPs appear to be safer for antagonists due to reduced antagonist wear. Importantly, both materials exhibited similar color stability, making PEEK a viable alternative for FDPs when aesthetic appeal and antagonist protection are primary considerations.
RESUMO
Introduction Age estimation holds significant importance within the realm of forensic science, serving as a crucial tool for various purposes such as validating birth certificates, aiding immigration processes, and determining eligibility for retirement benefits. Additionally, age estimation carries significant implications in situations involving human trafficking, offering insights into matters such as legal culpability, adult classification, and marriage age assessment. Aim The purpose of this research was to assess the precision of the Tooth Coronal Index (TCI) in the estimation of age, a key component of forensic odontology. Materials and methods The research employed a retrospective approach, analyzing 700 digital panoramic radiographs of the mandibular first bicuspids. The study population was categorized into five age groups viz. 20-30, 31-40, 41-50, 51-60, and above 61 years respectively. Statistical methods were applied to investigate the relation between TCI and age. Additionally, one-way ANOVA was utilized to compare the groups. Results Findings revealed that males aged between 20-30 years exhibited underestimation, while males above 60 years displayed overestimation. Among females, the smallest disparity between existent and calculated age was observed in the 31-40 age group. Notably, ANOVA analysis for females indicated highly significant differences between the calculated and actual ages across all age segments (P<0.01). Regarding the mean TCI, inter-group comparisons showed statistically insignificant differences in males, while in females, the distinctions were statistically extremely noteworthy (P<0.01). Conclusion The utilization of TCI for age estimation based on mandibular first bicuspids is recommended as a convenient, non-invasive, and time-efficient approach.
RESUMO
Oral squamous cell carcinoma (OSCC) is a malignancy of the oral cavity with poor prognosis. Dysregulation in glycolytic pathways involving glucose transporters (GLUT) has been implicated in poor prognosis. Furthermore, GLUT expression in cancer cells is regulated by several miRNAs. However, there is a lack of data about miRNA involved in the regulation of GLUT in OSCC. The objective is to evaluate the role of miRNA in the regulation of GLUT in OSCC. Data sources include PubMed (MEDLINE), Scopus, and Web of Science. Studies evaluating the miRNA involved or associated with the regulation of GLUT in OSCC were included in the systematic review. Data pertaining to GLUT and associated miRNA expression were extracted from studies. Qualitative assessment was carried out for GLUT and miRNA. The Newcastle-Ottawa Scale was used for quality assessment. Ten study articles were included after analyzing 4675 papers. These studies evaluated the GLUT and miRNA expression between healthy and OSCC samples. There are variable expression patterns of GLUT in OSCC. Furthermore, it was dependent on miRNA. The GLUT1 and GLUT-3 were detected more frequently in OSCC, while no study reveals the expression of GLUT2, GLUT4, GLUT7, GLUT8, GLUT13, SGLT1, and SGLT2 with miRNA regulation. However, there was insufficient evidence on specific miRNA linked to GLUT1 or GLUT3 expression. There is evidence of the role of miRNA in the regulation of GLUT especially GLUT1 and GLUT3 in OSCC; however, a specific relation to miRNA was understudied. In the future, studies exploring a clearer understanding of the association between miRNA and the GLUT metabolic pathway in relation to OSCC are warranted. Furthermore, association of miRNA and GLUT with progression of disease, disease resistance, and prognosis is assessed for better treatment outcomes.
RESUMO
The cancer-promoting ligand vascular endothelial growth factor-C (VEGF-C) activates VEGF receptor-3 (VEGFR-3). The VEGF-C/VEGFR-3 axis is expressed by a range of human tumor cells in addition to lymphatic endothelial cells. Activating the VEGF-C/VEGFR-3 signaling enhances metastasis by promoting lymphangiogenesis and angiogenesis inside and around tumors. Stimulation of VEGF-C/VEGFR-3 signaling promotes tumor metastasis in tumors, such as ovarian, renal, pancreatic, prostate, lung, skin, gastric, colorectal, cervical, leukemia, mesothelioma, Kaposi sarcoma, and endometrial carcinoma. We discuss and update the role of VEGF-C/VEGFR-3 signaling in tumor development and the research is still needed to completely comprehend this multifunctional receptor.
RESUMO
Metallodrugs have a potent application in various medical fields. In the current study, we used a novel Palladium(II) thiazolinyl picolinamide complex that was directly fabricated over the titanium implant to examine its potency in inhibiting dual-species biofilms and exopolysaccharides. Additionally, inhibition of mono- and dual-species biofilms by coated titanium plates in an in vitro joint microcosm was performed. The study was carried out for 7 days by cultivating mono- and dual-species biofilms on titanium plates placed in both growth media and artificial synovial fluid (ASF). By qPCR analysis, the interaction of co-cultured biofilms in ASF and the alteration in gene expression of co-cultured biofilms were studied. Remarkable alleviation of biofilm accumulation and EPS secretion was observed on the coated titanium plates. The effective impairment of biofilms and EPS matrix of biofilms on Pd(II)-E-coated titanium plates were visualized by Scanning Electron Microscopy. Moreover, coated titanium plates improved the adhesion of osteoblast cells, which is crucial for a bone biomaterial. The potential bioactivity of coated plates was also confirmed at the molecular level using qPCR analysis. The stability of coated plates in ASF for 7 days was examined with FESEM-EDAX analysis. Collectively, the present study provided an excellent anti-infective effect on Pd(II)-E-coated titanium plates without affecting their biocompatibility with bone cells.