Production study of Fr, Ra and Ac radioactive ion beams at ISOLDE, CERN.

The presented paper discusses the production of radioactive ion beams of francium, radium, and actinium from thick uranium carbide (UC x ) targets at ISOLDE, CERN. This study focuses on the release curves and extractable yields of francium, radium and actinium isotopes. The ion source temperature was varied in order to study the relative contributions of surface and laser ionization to the production of the actinium ion beams. The experimental results are presented in the form of release parameters. Representative extractable yields per µ C are presented for 222 - 231 Ac, several Ra and Fr isotopes in the mass ranges 214 ≤ A ≤ 233 and 205 ≤ A ≤ 231 respectively. The release efficiency for several isotopes of each of the studied elements was calculated by comparing their yields to the estimated in-target production rates modeled by CERN-FLUKA. The maximal extraction efficiency of actinium was calculated to be 2.1(6)% for a combination of surface ionization using a Ta ion source and resonant laser ionization using the two-step 438.58 nm, and 424.69 nm scheme.

Deformation versus Sphericity in the Ground States of the Lightest Gold Isotopes.

The changes in mean-squared charge radii of neutron-deficient gold nuclei have been determined using the in-source, resonance-ionization laser spectroscopy technique, at the ISOLDE facility (CERN). From these new data, nuclear deformations are inferred, revealing a competition between deformed and spherical configurations. The isotopes ^{180,181,182}Au are observed to possess well-deformed ground states and, when moving to lighter masses, a sudden transition to near-spherical shapes is seen in the extremely neutron-deficient nuclides, ^{176,177,179}Au. A case of shape coexistence and shape staggering is identified in ^{178}Au which has a ground and isomeric state with different deformations. These new data reveal a pattern in ground-state deformation unique to the gold isotopes, whereby, when moving from the heavy to light masses, a plateau of well-deformed isotopes exists around the neutron midshell, flanked by near-spherical shapes in the heavier and lighter isotopes-a trend hitherto unseen elsewhere in the nuclear chart. The experimental charge radii are compared to those from Hartree-Fock-Bogoliubov calculations using the D1M Gogny interaction and configuration mixing between states of different deformation. The calculations are constrained by the known spins, parities, and magnetic moments of the ground states in gold nuclei and show a good agreement with the experimental results.

Laser Spectroscopy of Neutron-Rich

The mean-square charge radii of ^{207,208}Hg (Z=80, N=127, 128) have been studied for the first time and those of ^{202,203,206}Hg (N=122, 123, 126) remeasured by the application of in-source resonance-ionization laser spectroscopy at ISOLDE (CERN). The characteristic kink in the charge radii at the N=126 neutron shell closure has been revealed, providing the first information on its behavior below the Z=82 proton shell closure. A theoretical analysis has been performed within relativistic Hartree-Bogoliubov and nonrelativistic Hartree-Fock-Bogoliubov approaches, considering both the new mercury results and existing lead data. Contrary to previous interpretations, it is demonstrated that both the kink at N=126 and the odd-even staggering (OES) in its vicinity can be described predominately at the mean-field level and that pairing does not need to play a crucial role in their origin. A new OES mechanism is suggested, related to the staggering in the occupation of the different neutron orbitals in odd- and even-A nuclei, facilitated by particle-vibration coupling for odd-A nuclei.

Optimized robotic setup for automated active thermography using advanced path planning and visibility study.

In-line inspection of advanced components remains a challenging task in industry. The authors will describe an automated methodology that uses numerical simulations to automatically determine the best set of experimental parameters to inspect the structure on defects using active thermography. The inspection is performed using a robotic arm and advanced path-planning tools to determine the optimal positions of the measurement points and excitation points. During the path planning, the directional emissivity is considered for the complex surface, and a minimization of the amount of measurement points is performed. The numerical simulation optimization used a genetic algorithm and spline regression model to optimize the heat power, robot speed, camera frame rate, and excitation timing to fulfill the automatic inspection.

Towards high-resolution laser ionization spectroscopy of the heaviest elements in supersonic gas jet expansion.

Resonant laser ionization and spectroscopy are widely used techniques at radioactive ion beam facilities to produce pure beams of exotic nuclei and measure the shape, size, spin and electromagnetic multipole moments of these nuclei. However, in such measurements it is difficult to combine a high efficiency with a high spectral resolution. Here we demonstrate the on-line application of atomic laser ionization spectroscopy in a supersonic gas jet, a technique suited for high-precision studies of the ground- and isomeric-state properties of nuclei located at the extremes of stability. The technique is characterized in a measurement on actinium isotopes around the N=126 neutron shell closure. A significant improvement in the spectral resolution by more than one order of magnitude is achieved in these experiments without loss in efficiency.