A novel ZVS full-bridge cascaded step-up DC-DC converter with resonant auxiliary circuit for high voltage-gain applications.

High conversion ratio dc-dc converters have received significant attention in renewable energy systems, primarily due to their necessary high-gain characteristics. This research proposes a high step-up ratio full-bridge resonant cascaded (FBRC) dc-dc converter designed for use in photovoltaics (PV), fuel cells (FC), electric vehicles (EV), and other low-voltage output energy sectors to achieve high voltage gain. This converter contains a full-bridge cell with a boost input inductor, a diode-capacitor cascaded stage that replaces the transformer as a voltage multiplier and an inductor-capacitor (LC) parallel-series resonant network across the FB terminal. One of the strategic features of the converter is its high voltage step-up characteristic combined with lower duty cycle operation that limits the maximum current through the active devices, making it particularly suitable for systems that generate low output voltage. In addition, zero-voltage switching (ZVS) is achieved during the turn-off and turn-on operation of the FB switches from 25% to full load, thereby lessening the switching losses. Moreover, the diminished necessity for passive components and the decreased voltage stress on both active and passive devices lead to the use of smaller and more cost-effective components. The theoretical analysis of the proposed converter is validated using a 500 W laboratory-scale prototype wherein high-performance SiC-based MOSFETs have been utilized as switching devices. It offers reduced ripples, with input current ripple at 5% and output voltage ripple at 0.76%. When the load is 400 W and 60 V as the input voltage, the maximum efficiency is found 95.8% at 400 V output voltage. The proposed dc-dc converter, with its high voltage gain and reduced component stress, shows significant promise for application in renewable energy systems.

High voltage-gain full-bridge cascaded dc-dc converter for photovoltaic application.

Over the past few years, high step-up dc-dc converters have been drawn substantial attention because of their wide-ranging application not only in the renewable energy sector but also in many other applications. To acquire a high voltage gain in photovoltaic (PV) and other renewable energy applications, a high step-up dc-dc converter is proposed in this paper. The proposed converter structure consists of a full-bridge (FB) module along with an input boost inductor and a voltage multiplier based on the Cockcroft-Walton (CW) principle with a parallel inductor. The key features of the proposed converter are: 1) high voltage gain with lower voltage stress on the switches, diodes and other passive elements without affecting the number of cascaded stages, 2) a minimum size of boost inductance and cascaded stage capacitance that ensures its compactness and low cost, and 3) a minimal number of major components. Circuit operation, steady-state analysis and various design parameters of the proposed converter are explained in details. In order to prove the performance of the theoretical analysis, a laboratory prototype is also implemented. The peak voltage gain and the maximum efficiency obtained are 11.9 and 94.6% respectively with very low input current ripple and output voltage ripple generated.