The adjunctive effect of polydeoxyribonucleotide on bone formation in alveolar ridge preservation: A pre-clinical in vivo study.

AIM: This study investigated the adjunctive effect of polydeoxyribonucleotide (PDRN) on bone formation in alveolar ridge preservation (ARP) sockets. MATERIALS AND METHODS: Both mandibular second, third and fourth premolars of eight beagle dogs were randomly divided into ARP and ARP/PDRN groups. Following tooth extraction, ARP procedures were conducted using collagenized alloplastic graft material and bilayer collagen membrane soaked with normal saline (ARP group) or PDRN (ARP/PDRN group) for 10 min before application. Both groups were also randomly allocated to 2-, 4- or 12-week healing subgroups. The primary endpoint of this study was to compare histomorphometric differences between ARP and ARP/PDRN. The secondary endpoints of this study were to compare micro-CT analysis and three-dimensional volumetric measurement between the two groups. RESULTS: In the histomorphometric analysis, the ARP/PDRN group exhibited greater new bone formation at coronal, middle and total position compared with the ARP group at 2-week healing. The number of newly formed blood vessels was higher in the ARP/PDRN group than in the ARP group at 2- and 4-week healing. In micro-CT analysis, the mean new bone volume/total bone volume between ARP and ARP/PDRN was statistically significant at 2-week healing. Ridge volume alterations were significantly decreased in the ARP/PDRN group during entire healing time compared with the ARP group, especially on the buccal side. CONCLUSIONS: The application of PDRN in ARP might provide additional benefits for early bone regeneration and maintenance of buccal ridge volume.

Association between toothbrushing and cardiovascular risk factors: a cross-sectional study using Korean National Health and Nutrition Examination Survey 2015-2017.

BACKGROUND: Previous studies have suggested that frequent toothbrushing is associated with a lower risk of future cardiovascular events. We sought to investigate further the relationship between toothbrushing, cardiovascular risk factors, and lifestyle behaviours. METHODS: We analysed a cross-sectional survey including 13,761 adults aged 30 years or older without a history of cardiovascular diseases from the Korean National Health and Nutritional Examination Survey. Conventional cardiovascular risk factors (blood pressure, lipid profiles, and fasting glucose), and inflammatory markers (high-sensitivity C-reactive protein [hsCRP], and white blood cell counts [WBC]) were investigated in relation to the frequency of toothbrushing. RESULTS: The estimated 10-year atherosclerotic cardiovascular disease (ASCVD) risk, calculated using the pooled cohort equations was 13.7%, 9.1%, and 7.3% for participants who reported toothbrushing 0-1, 2, and ≥ 3 times a day, respectively. Both conventional risk factors and inflammatory markers were significantly associated with frequent toothbrushing. However, after adjusting potential confounding factors such as age, sex, comorbidities, and lifestyle behaviours, only inflammatory markers were remained as significant factors. CONCLUSIONS: Oral hygiene behaviours are closely linked to cardiovascular risk factors. This study suggests that reduced systemic inflammatory burden may explain the benefit of improved oral hygiene in terms of cardiovascular risk.

Adjunctive effect of 470-nm and 630-nm light-emitting diode irradiation in experimental periodontitis treatment: a preclinical study.

PURPOSE: This study investigated the adjunctive effect of light-emitting diodes (LEDs) in the treatment of experimental periodontitis. METHODS: Experimental periodontitis was induced by placing ligatures around the mandibular second, third, and fourth premolars of 6 beagles for 3 months. After ligature removal, periodontitis progressed spontaneously for 2 months. The animals' hemimandibles were allocated among the following 3 groups: 1) no treatment (control), 2) scaling and root planing (SRP), and 3) SRP with LED irradiation at 470-nm and 630-nm wavelengths (SRP/LED). The probing pocket depth (PPD) and gingival recession (GR) were measured at baseline, 6 weeks, and 12 weeks. The clinical attachment level (CAL) was calculated. After 12 weeks, histological and histomorphometric assessments were performed. The distances from the gingival margin to the apical extent of the junctional epithelium (E) and to the connective tissue (CT) attachment were measured, as was the total length of soft tissue (ST). RESULTS: PPD and CAL increased at 12 weeks compared with baseline in the control group (6.31±0.43 mm to 6.93±0.50 mm, and 6.46±0.60 mm to 7.61±0.78 mm, respectively). PPD and CAL decreased at 12 weeks compared with baseline in the SRP group (6.01±0.59 to 4.81±0.65 mm, and 6.51±0.98 to 5.39±0.93 mm, respectively). PPD and CAL decreased at 12 weeks compared with baseline in the SRP/LED group (6.03±0.39 to 4.46±0.47 mm, and 6.11±0.47 to 4.78±0.57 mm, respectively). The E/ST and CT/ST ratios significantly differed among the 3 groups (P<0.05). The clinical parameters and histologic findings demonstrated that 470-nm and 630-nm wavelength LED irradiation accompanying SRP could improve treatment results. CONCLUSIONS: Within the study limitations, 470 nm and 630 nm wavelength LED irradiation might provide additional benefits for periodontitis treatment.

The cumulative survival rate of dental implants with micro-threads: a long-term retrospective study.

PURPOSE: This study aimed to evaluate the long-term cumulative survival rate (CSR) of dental implants with micro-threads in the neck over a 10-year follow-up period and to examine the factors influencing the survival rate of dental implants. METHODS: This retrospective study was based on radiographic and dental records. In total, 151 patients received 490 Oneplant® dental implants with an implant neck micro-thread design during 2006-2010 in the Department of Periodontology of Seoul National University Dental Hospital. Implant survival was evaluated using Kaplan-Meier analysis. Cox proportional hazard regression analysis was used to identify the factors influencing implant failure. RESULTS: Ten out of 490 implants (2.04%) failed due to fixture fracture. The CSR of the implants was 97.9%, and no significant difference was observed in the CSR between external- and internal-implant types (98.2% and 97.6%, respectively, P=0.670). In Cox regression analysis, 2-stage surgery significantly increased the risk of implant failure (hazard ratio: 4.769, P=0.039). There were no significant differences in influencing factors, including sex, age, implant diameter, length, fixture type, location, surgical procedure, bone grafting, and restoration type. CONCLUSIONS: Within the limitations of this retrospective study, the micro-thread design of the implant neck was found to be favorable for implant survival, with stable clinical outcomes.

Diagnostic performance of a point-of-care test device for periodontitis using human saliva: a single-center, single-blinded, confirmatory study.

OBJECTIVE: Recently, matrix metalloproteinase-8 (MMP-8) has been used to diagnose periodontal disease in a point-of-care (POC) test in order to save time and cost relative to the traditional diagnostic workflow. This study aimed to investigate the diagnostic performance of INCLIX TRF MMP-8, a POC testing device for periodontitis using the area under the receiver operating characteristic curve, sensitivity, specificity, and predictive values. MATERIALS AND METHODS: Full-mouth periodontal examination and radiographic analysis were used for evaluating periodontal condition based on the 2018 classification of periodontal disease. A dichotomous diagnosis of clinical periodontal condition was performed using the POC device. The relationships among periodontal condition and the concentration of MMP-8, tooth loss (TL), gingival index (GI), plaque index (PI), and alveolar bone loss (ABL) were assessed by the Spearman rank correlations (rs). RESULTS: In all, 108 cases of non-periodontitis (NP) and 191 cases of periodontitis (P), including 38 cases of periodontitis stage I, 42 cases of periodontitis stage II, 99 cases of periodontitis stage III, and 11 cases of periodontitis stage IV, were enrolled in this study. Diagnostic accuracy in assessing periodontal condition with the POC device improved when it was used with participants aged ≥ 40 years. There were weak positive correlations between periodontal condition and MMP-8 and between periodontal condition and GI (rs2 = 0.1124 and rs2 = 0.0906, respectively), whereas a strong positive correlation between periodontal condition and alveolar bone loss (rs2 = 0.6877) was observed. CONCLUSION: The POC device investigated in this study is a potential tool to distinguish between NP and P in individuals ≥ 40 years of age.

Effects of adjacent periodontitis on osseointegrated dental implants.

PURPOSE: This study aimed to investigate whether new-onset periodontitis or apical periodontitis in the adjacent teeth affects osseointegrated dental implants in a beagle dog model. METHODS: One control group and 2 experimental groups (periodontitis and apical periodontitis groups) were defined based on the presence of experimental periodontitis or apical periodontitis, with 1 beagle dog randomly assigned to each group. The mandibular second and fourth premolars on both sides of the 3 beagles were extracted. Eight weeks after extraction, 4 bone-level implant fixtures, 2 on both sides of each mandible, were placed in each beagle. Six weeks after implant surgery, healing abutments were connected. After sufficient osseointegration, plaque control was performed in the control group, while periodontitis and apical periodontitis were induced in the experimental groups. The beagles were euthanized for histological analyses 20 weeks after induction of experimental periodontitis. Statistical analyses were performed using the Kruskal-Wallis test with the Bonferroni correction to compare the 3 groups. RESULTS: The implants in the control and apical periodontitis groups were well-maintained, while those in the periodontitis group showed clinical signs of inflammation with bone resorption. The bone-to-implant contact (BIC) and bone area values in the periodontitis group were lower than those in the other groups. The distance between the implant shoulder and the first BIC was significantly greater in the periodontitis group than in the control group (P<0.05). CONCLUSIONS: The presence of periodontitis in adjacent teeth can pose a risk to dental implants, potentially resulting in peri-implantitis. However, this was not observed for apical periodontitis. Within the limitations of this study, periodontal care is necessary to reduce the impact of periodontitis in adjacent teeth on osseointegrated implants.

Comparative evaluation of 3D-printed and conventional implants in vivo: a quantitative microcomputed tomographic and histomorphometric analysis.

In recent years, 3D-printing technology to fabricate dental implants has garnered widespread attention due to its patient-specific customizability and cost-effectiveness. This preclinical animal study analyzed the radiographic and histomorphometric outcomes of 3D-printed implants (3DIs) placed immediately after extraction and compared them to conventional implants (CIs). 3DIs and CIs of the same dimensions placed immediately were analyzed at 2, 6, and 12 weeks. The micro-computed tomography (micro-CT) analysis revealed statistically significant differences at 2 weeks in favor of 3DIs over the CIs in terms of bone volume/tissue volume (BV/TV), bone surface/bone volume (BS/BV), trabecular bone pattern factor (Tb.Pf), and structure model index (SMI). At 2 weeks, the mean bone-to-implant contact (BIC) of the 3DIs was greater than that of the CIs; the mean bone area fraction occupancy (BAFO) and the number of Haversian canals of the 3DIs showed no statistically significant differences compared to CIs at 2 weeks. At 6 and 12 weeks, there were no statistically significant differences between the 3DIs and CIs in any parameters. Within limitations, in the early stage of extraction socket healing, the 3DIs demonstrated a higher BIC than the CIs, presenting that 3DIs may be a potential option for immediate placement to enhance osseointegration.

Effect of polydeoxyribonucleotide on early bone formation in lateral bone augmentation with immediate implant placement: an experimental in vivo study.

This study investigated early bone formation using collagenated biphasic calcium phosphate (CBCP) with or without polynucleotide (PDRN). Third (P3) or fourth (P4) premolars of six male beagle dogs were extracted and 5-mm-high dehiscence defects were created, followed by 3D-printed implant placement. The buccal bone defects were grafted with (i) CBCP and collagen membrane or (ii) CBCP soaked in polydeoxyribonucleotide (CBCP/PDRN) and collagen membrane. Samples of the experimental sites were harvested at 2- and 6-weeks post-surgery. The specimens were evaluated with radiologic and histomorphometric analysis. No significant differences were found between the CBCP and CBCP/PDRN groups in the micro-CT analysis at 2 or 6 weeks. No significant differences were observed in bone-to-implant contact (BIC) or bone area fraction occupancy (BAFO) in buccal augmented and lingual non-augmented areas. In the qualitative analysis, the new bone (NB) area and NB proportion in buccal augmented areas showed significantly higher values in the CBCP/PDRN group than in the CBCP group at 2 and 6 weeks. Peri-implant buccal dehiscence defects with immediate 3D-printed implant placement were corrected using a collagen membrane and CBCP or CBCP/PDRN. PDRN might have the potential to facilitate early bone formation with sufficient stability over time in dehiscence defects.

Risk factors impacting the survival of implants replaced following failure: A retrospective study.

AIM: This study aimed to investigate factors influencing the survival of replaced dental implants. MATERIALS AND METHODS: Charts from 2005 to 2021 were reviewed. Replaced implants after removal for the first time were identified. Depending on their survival, the replaced group was divided into the surviving and second-removal groups. Risk factors affecting survival of replaced implants were evaluated considering clustering of multiple implants within patients. RESULTS: The present study included 464 replaced implants of 370 patients, of which 429 and 35 implants were categorized into the surviving group and the second-removal group. The 5-year survival rate was 90.2 ± 0.18% in replaced implants at sites with a periodontitis history and 97.0 ± 0.15% at sites without a periodontitis history (p = 0.008). The 5-year survival rate was 89.1 ± 0.27% in replaced implants with guided bone regeneration (GBR) at first implant placement and 93.9 ± 0.14% at non-GBR (p = 0.032). The 5-year survival rate was 97.6 ± 0.13% in replaced implants with GBR and 90.3 ± 0.17% in replaced implants without GBR (p = 0.026). In the multivariable analysis adjusted for clinical variables, periodontitis history (adjusted hazard ratio [aHR] = 3.417; 95% confidence interval [CI] = 1.161-10.055), GBR at first implant placement (aHR = 2.152; 95% CI = 1.052-4.397) and non-GBR at primary implant replacement (aHR = 0.262; 95% CI = 0.088-0.778) were identified as independent risk factors for second implant removal. CONCLUSIONS: Periodontitis history, GBR at first implant placement and non-GBR at primary implant replacement were identified as risk factors affecting the survival of replaced implants.

Comparison of osteogenesis and osseointegration following implant placement with simultaneous maxillary sinus augmentation using particulate and collagenated block types of deproteinized porcine bone mineral: a radiographic and histomorphometric analysis.

OBJECTIVES: This study aimed to compare osseointegration and osteogenesis after single-stage maxillary sinus augmentation with the lateral window using particulate deproteinized porcine bone mineral (PDPBM) and collagenated block deproteinized porcine bone mineral (BDPBM). MATERIALS AND METHODS: Bi-maxillary premolars of six beagle dogs were extracted. Eight weeks later, an implant was placed into each augmented sinus with PDPBM or BDPBM according to a split-mouth design. Eight weeks later, all specimens were harvested. Each specimen was separated into the region of interest with the implant (ROI-I) and region of interest with sinus augmented area (ROI-S) 5 mm away from ROI-I. ROI-I and ROI-S were evaluated through micro-computed tomography and histomorphometry. RESULTS: Bone substitute insertion took longer for the PDPBM group than for the BDPBM group (P = 0.002). In ROI-I, three-dimensional bone-to-implant contact (BIC) did not show statistically significant differences between the groups. Two-dimensional BIC also showed comparable values for both groups. In ROI-S, the graft material volume/tissue volume, trabecular bone pattern factor, and structural model index were higher in the BDPBM group than in the PDPBM group (P < 0.05). The proportions of new bone, graft material, and connective tissue were not significantly statistically different between groups. Less new bone was found in the apical area than in the coronal or middle areas in the BCPBM group (P < 0.05). CONCLUSIONS: BDPBM may save time in inserting bone substitutes and provide comparable osteogenesis and osseointegration to PDPBM. CLINICAL RELEVANCE: When performing sinus augmentation, BDPBM might improve operator's convenience with comparable biological results compared to PDPBM.

Progression of experimental peri-implantitis in guided bone regeneration and pristine bone: A preclinical in vivo study.

BACKGROUND: Guided bone regeneration (GBR) is the most widely used technique for overcoming the deficiency of alveolar bone. However, the progression of peri-implantitis in regenerative and pristine bone sites has not been fully investigated. The aim of this study is to compare experimental peri-implantitis around implants placed in pristine bone and GBR sites. METHODS: Bilateral  mandibular first molars were extracted from six beagle dogs, and standardized horizontal ridge defect was simultaneously created at predetermined site in unilateral mandible. After 8 weeks, guided bone regeneration procedure was conducted at the defect site. After 16 weeks, implants (ϕ 3.6×8.0 mm) were placed at both extracted sites. This study included 3 months of active breakdown and another 3 months of spontaneous progression period. Radiographs were taken at each phase and specimens were obtained for histological, immunohistochemical, and polarized light microscopic analysis. RESULTS: Marginal bone loss around implant did not show the significant differences between pristine bone and GBR sites during spontaneous progression period. In immunohistochemical analysis, inflammatory and immune-related cells were predominantly detected in peri-implantitis-affected area rather than unaffected area. In the polarized light microscopic analysis, substantial reductions in the amount and thickness of collagen fibers were observed in peri-implantitis-affected area compared with unaffected tissues. However, there were no significant differences in histological, immunohistochemical, polarized light microscopic outcomes between pristine bone and GBR sites. CONCLUSION: Previous hard tissue grafting at the implant sites did not affect experimental peri-implantitis and exhibited similar radiographic, histological, immunohistochemical, and polarized light microscopic outcomes compared with those of pristine bone sites.

A preclinical study comparing single- and double-root 3D-printed Ti-6Al-4V implants.

Recently, double-root implants have been investigated using 3D-printed technology. Here, we investigated damping capacity, microcomputed tomographic (micro-CT) and histological analyses of double-root 3D-printed implants compared with single-root 3D printed implants. Single- and double-root 3D-printed implants were fabricated and placed at both sides of mandibular third and fourth premolars in four beagle dogs. The damping capacity was measured, and periapical X-rays were taken every 2 weeks for 12 weeks. The bone volume/tissue volume (BV/TV) and bone mineral density (BMD) around the implants were measured with micro-CT. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histological samples. The implant stability values between the groups were not significantly different, except at 4 and 12 weeks. The marginal bone changes were similar at the mesial and distal areas between the groups. The BV/TV and BMD values of the double-root 3D-printed implants showed no statistical difference through micro-CT analysis, but the double-root 3D-printed implants showed lower BIC and BAFO values through histomorphometric analysis compared to the single-root 3D-printed implants. Compared to single-root implants, 3D-printed double-root implants demonstrated comparable stability and bone remodeling around the fixtures, but the statistically significant bone loss in the furcation area remains problematic.

In vitro investigation of the antibacterial and anti-inflammatory effects of LED irradiation.

PURPOSE: This study aimed to investigate the proper wavelengths for safe levels of light-emitting diode (LED) irradiation with bactericidal and photobiomodulation effects in vitro. METHODS: Cell viability tests of fibroblasts and osteoblasts after LED irradiation at 470, 525, 590, 630, and 850 nm were performed using the thiazolyl blue tetrazolium bromide assay. The bactericidal effect of 470-nm LED irradiation was analyzed with Streptococcus gordonii, Aggregatibacter actinomycetemcomitans, Fusobacterium nucleatum, Porphyromonas gingivalis, and Tannerella forsythia. Levels of nitric oxide, a proinflammatory mediator, were measured to identify the anti-inflammatory effect of LED irradiation on lipopolysaccharide-stimulated inflammation in RAW 264.7 macrophages. RESULTS: LED irradiation at wavelengths of 470, 525, 590, 630, and 850 nm showed no cytotoxic effect on fibroblasts and osteoblasts. LED irradiation at 630 and 850 nm led to fibroblast proliferation compared to no LED irradiation. LED irradiation at 470 nm resulted in bactericidal effects on S. gordonii, A. actinomycetemcomitans, F. nucleatum, P. gingivalis, and T. forsythia. Lipopolysaccharide (LPS)-induced RAW 264.7 inflammation was reduced by irradiation with 525-nm LED before LPS treatment and irradiation with 630-nm LED after LPS treatment; however, the effects were limited. CONCLUSIONS: LED irradiation at 470 nm showed bactericidal effects, while LED irradiation at 525 and 630 nm showed preventive and treatment effects on LPS-induced RAW 264.7 inflammation. The application of LED irradiation has potential as an adjuvant in periodontal therapy, although further investigations should be performed in vivo.

The impact of polydeoxyribonucleotide on early bone formation in lateral-window sinus floor elevation with simultaneous implant placement.

PURPOSE: The aim of this study was to evaluate the impact of polydeoxyribonucleotide (PDRN) on histologic outcomes when implant placement and lateral sinus floor elevation are performed simultaneously. METHODS: Three bimaxillary premolars (P2, P3, and P4) were extracted from 4 beagle dogs 2 months before lateral sinus floor elevation. After lateral elevation of the sinus membrane, each sinus was allocated to either the test or control group. Sinuses underwent either 1) collagenated synthetic bone graft with PDRN following lateral sinus floor elevation (test group) or 2) collagenated synthetic bone graft without PDRN after lateral sinus floor elevation (control group). Eight weeks after the surgical procedure, all animals were euthanised for a histologic and histomorphometric assessment. Augmented height (AH), protruding height (PH), and bone-to-implant contact in pristine (BICp) and augmented (BICa) bone were measured. The composition of the augmented area, which was divided into 3 areas of interest located in coronal, middle and apical areas (AOI_C, AOI_M, and AOI_A), was calculated with 3 parameters: the area percentage of new bone (pNB), residual bone graft particle (pRBP), and fibrovascular connective tissue (pFVT). RESULTS: AH, PH, BICp, BICa total, BICa coronal, and BICa middle values were not significantly different between sinuses in the control and test groups (all P>0.05). The BICa apical of sinuses in the test group (76.7%±9.3%) showed statistically higher values than those of sinuses in the control group (55.6%±22.1%) (P=0.038). pNB, pRBP, and pFVT showed statistically significant differences between the 2 groups in AOI_A (P=0.038, P=0.028, and P=0.007, respectively). pNB, pRBP, and pFVT in AOI_C and AOI_M were not significantly different between samples in the control and test groups (all P>0.05). CONCLUSIONS: The histologic findings revealed that lateral sinus floor elevation with PDRN might improve early new bone formation and enable higher bone-to-implant contact.

Repeated irradiation by light-emitting diodes may impede the spontaneous progression of experimental periodontitis: a preclinical study.

PURPOSE: We investigated whether repeated irradiation with light-emitting diodes (LEDs) at a combination of 470 nm and 525 nm could suppress the progression of experimental periodontitis. METHODS: A experimental periodontitis model was established in the second, third, and fourth premolars of the mandible in beagle dogs for 2 months. The spontaneous progression of periodontitis was monitored under the specified treatment regimen for 3 months. During this period, the animals were subjected to treatments of either plaque control only (control) or plaque control with LED application (test) at 2-week intervals. The clinical parameters included the probing pocket depth (PPD), gingival recession (GR), and the clinical attachment level (CAL). Histomorphometric analysis was performed using measurements of the length of the junctional epithelium, connective tissue (CT) zone, and total soft tissue (ST). RESULTS: There were significant differences in PPD between the control and test groups at baseline and 12 weeks. When the change in PPD was stratified based on time intervals, it was shown that greater differences occurred in the test group, with statistical significance for baseline to 12 weeks, 6 to 12 weeks, and baseline to 6 weeks. There was no significant difference in GR between the control and test groups at any time points. Likewise, no statistically significant differences were found in GR at any time intervals. CAL showed a statistically significant difference between the control and test groups at baseline only, although significant differences in CAL were observed between baseline and 12 weeks and between 6 and 12 weeks. The proportion of CT to ST was smaller for both buccal and lingual areas in the control group than in the test group. CONCLUSIONS: Repeated LED irradiation with a combination of 470-nm and 525-nm wavelengths may help suppress the progression of periodontal disease.

The optimal dosage of hyaluronic acid for bone regeneration in rat calvarial defects.

PURPOSE: Hyaluronic acid (HA) affects angiogenesis and promotes the migration and differentiation of mesenchymal cells, thereby activating the osteogenic ability of osteoblasts. Although studies on the action of HA during bone regeneration are being actively conducted, the optimal dose of HA required for bone regeneration remains unclear. Therefore, the purpose of this study was to elucidate the most effective HA dose for bone formation using a rat critical-size defect model. METHODS: Thirty rats were randomly divided into 5 groups, with 6 rats in each group. An absorbable collagen sponge soaked with HA or saline was used to fill an 8-mm defect, which was then covered with a collagen membrane. Different treatments were performed for each group as follows: (1) saline control, (2) 1 mg/mL HA, (3) 25 mg/mL HA, (4) 50 mg/mL HA, or (5) 75 mg/mL HA. After a healing period of 4 weeks, micro-computed tomography and histological analysis were performed. The obtained values were analyzed using analysis of variance and the Tukey test (P<0.05). RESULTS: At week 4, the 75 mg/mL HA group had the highest bone volume/total volume ratio, new bone, and bone fill among the 5 groups, and these values were significantly different from those observed in the control group (P<0.01) and 1 mg/mL HA group (P<0.001). More active bone formation was observed in the higher-dose HA groups (25 mg/mL, 50 mg/mL, and 75 mg/mL HA), which included a large amount of woven bone. CONCLUSIONS: The 75 mg/mL HA group showed better bone formation than the other groups (1, 25, and 50 mg/mL HA and control).

Dental-derived cells for regenerative medicine: stem cells, cell reprogramming, and transdifferentiation.

Embryonic stem cells have been a popular research topic in regenerative medicine owing to their pluripotency and applicability. However, due to the difficulty in harvesting them and their low yield efficiency, advanced cell reprogramming technology has been introduced as an alternative. Dental stem cells have entered the spotlight due to their regenerative potential and their ability to be obtained from biological waste generated after dental treatment. Cell reprogramming, a process of reverting mature somatic cells into stem cells, and transdifferentiation, a direct conversion between different cell types without induction of a pluripotent state, have helped overcome the shortcomings of stem cells and raised interest in their regenerative potential. Furthermore, the potential of these cells to return to their original cell types due to their epigenetic memory has reinforced the need to control the epigenetic background for successful management of cellular differentiation. Herein, we discuss all available sources of dental stem cells, the procedures used to obtain these cells, and their ability to differentiate into the desired cells. We also introduce the concepts of cell reprogramming and transdifferentiation in terms of genetics and epigenetics, including DNA methylation, histone modification, and non-coding RNA. Finally, we discuss a novel therapeutic avenue for using dental-derived cells as stem cells, and explain cell reprogramming and transdifferentiation, which are used in regenerative medicine and tissue engineering.

The healing pattern of a 4 mm proximal infrabony defect was not significantly different from a 2 mm defect adjacent to dental implant in a canine mandible.

PURPOSE: The purpose of this study was to evaluate and compare the healing patterns of 2-mm and 4-mm proximal infrabony defects adjacent to dental implants in canine mandibles. METHODS: Four male beagles were used. Two groups were created: a 2-mm group (n=4) and a 4-mm group (n=4) depending on the horizontal dimension of proximal infrabony defects adjacent to implants. Bone healing patterns between the 2 groups were evaluated and compared at 8 and 16 weeks using radiographic, histological, histomorphometric, and fluorescent labelling analyses. RESULTS: According to microcomputed tomography, the median bone volume fraction, bone mineral density, and the percentage of radiographic distance from the defect bottom to the most coronal bone-to-implant contact (radio-mcBIC) were 32.9%, 0.6 g/cm3, and 73.7% (8 weeks) and 45.7%, 0.7 g/cm3, and 76.0% (16 weeks) in the 2-mm group and 57.7%, 0.8 g/cm3, and 75.7% (8 weeks) and 50.9%, 0.8 g/cm3, and 74.7% (16 weeks) in the 4-mm group, respectively. According to histomorphometry, the median bone area fraction, mcBIC and the percentage of BIC amounted to 36.7%, 3.4 mm, and 58.4% (8 weeks) and 49.2%, 3.4 mm, and 70.2% (16 weeks) in the 2-mm group and 50.0%, 3.0 mm, and 64.8% (8 weeks) and 55.7%, 3.0 mm, and 69.6% (16 weeks) in the 4-mm group, respectively. No statistically significant differences were found between the groups for any variables (P>0.05). CONCLUSIONS: The proximal defects that measured 2 mm and 4 mm showed similar healing patterns at 8 and 16 weeks, and the top of bone formation in the defects was substantially limited to a maximum of 1.6 mm below the implant shoulder in both groups.

The effect of hard-type crosslinked hyaluronic acid with particulate bone substitute on bone regeneration: positive or negative?

PURPOSE: The role of hard-type crosslinked hyaluronic acid (HA) with particulate bone substitutes in bone regeneration for combined inlay-onlay grafts has not been fully investigated. We aimed to evaluate the effect of hard-type crosslinked HA used with bone substitute in terms of new bone formation and space maintenance. METHODS: A 15-mm-diameter round defect was formed in the calvaria of 30 New Zealand White rabbits. All animals were randomly assigned to 1 of 3 groups: the control group (spontaneous healing without material, n=10), the biphasic calcium phosphate (BCP) graft group (BCP, n=10), and the BCP graft with HA group (BCP/HA, n=10). The animals were evaluated 4 and 12 weeks after surgery. Half of the animals from each group were sacrificed at 4 and 12 weeks after surgery. Samples were evaluated using micro-computed tomography, histology, and histomorphometry. RESULTS: The BCP group showed higher bone volume/tissue volume (BV/TV) values than the control and BCP/HA groups at both 4 and 12 weeks. The BCP and BCP/HA groups showed higher bone surface/tissue volume (BS/TV) values than the control group at both 4 and 12 weeks. The BCP group showed higher BS/TV values than the control and BCP/HA groups at both 4 and 12 weeks. No statistically significant difference in newly formed bone was found among the 3 groups at 4 weeks. The BCP group showed significantly higher new bone formation than the BCP/HA group at 12 weeks. CONCLUSIONS: Hard-type crosslinked HA did not show a positive effect on new bone formation and space maintenance. The negative effect of hard-type crosslinked HA may be due to the physical properties of HA that impede osteogenic potential.

Dental students' self-evaluation comparison between dual dental education systems in Korea.

BACKGROUND: This study aimed to examine the satisfaction, educational linkage, and self-perceived competence of dental students enrolled in either 4 + 4 dental program, comprising an undergraduate degree and Doctor of Dental Surgery degree (DDS), or 3 + 4 program, which is a BS/DDS combined degree program, in the Korean dental education system. MATERIALS AND METHODS: The survey questionnaire using a 5-point Likert scale was developed and validated by four dental education experts, consisting of satisfaction with undergraduate courses, the interconnection of undergraduate courses with the DDS curriculum, and self-assessed core competency for dental graduates. A total of 252 students provided informed consent and voluntarily responded to the survey, among whom 109 students were in the 3 + 4 system and 143 were in the 4 + 4 system. Cronbach's correlation analysis and independent t-test were conducted for each evaluation item. RESULTS: Students' overall satisfaction level with the undergraduate education was higher in the 4 + 4 system than in the 3 + 4 system (P = 0.003). Students enrolled in the 4 + 4 system recognized that natural sciences are more connected to the graduate-level DDS program (P <  0.001), while the 3 + 4 students recognized that studies in medicine are closely interconnected to the DDS program (P = 0.001). There was almost no statistically significant difference in the students' perception of competency between the two education systems. DISCUSSION: Even though this study analyzed the case of a single university operating both 3 + 4 and 4 + 4 systems, it can be used as the groundwork for developing new opportunities and models of dental education system.