Comparison of the fibrosis degree using acoustic radiation force impulse elastography and diffusion-weighted magnetic resonance imaging in chronic hepatitis cases.

OBJECTIVE: The aim of this study was to investigate the correlation of fibrosis stages in cases of chronic hepatitis by comparing shear wave elastography and diffusion-weighted magnetic resonance imaging. METHODS: A total of 46 chronic hepatitis patients with an age range of 20-50 years were classified into three groups based on their fibrosis stages. Comparison group 1: the presence of fibrosis (S0 and S1≤); comparison group 2: the presence of significant fibrosis (≤S2 and S3≤); and comparison group 3: the presence of cirrhosis (≤S4 and S6). Shear wave velocities were measured by acoustic radiation force impulse elastography. Diffusion-weighted magnetic resonance imaging was performed on a 3.0 Tesla MRI device. RESULTS: In comparison group 1 (S0 and S1≤), the area under the curve, sensitivity, and specificity of acoustic radiation force impulse values were 0.784, 87, and 60%, respectively, while these values were 0.718, 80, and 66%, respectively, for apparent diffusion coefficient . In comparison group 2 (≤S2 and S3≤), the area under the curve, sensitivity, and specificity of acoustic radiation force impulse values were 0.917, 80, and 86%, respectively, and the apparent diffusion coefficient values were 0.778, 90, and 66%, respectively. In comparison group 3, the area under the curve, sensitivity, and specificity of acoustic radiation force impulse values were 0.977, 100, and 95%, respectively. There was no statistically significant difference between the apparent diffusion coefficient values of the cases in the three groups (p=0.132). CONCLUSION: Noninvasive methods are gaining importance day by day for staging hepatic fibrosis. Acoustic radiation force impulse elastography was evaluated as a more reliable examination than diffusion-weighted magnetic resonance imaging in revealing the presence of fibrosis, determining significant fibrosis, and diagnosing cirrhosis.

Comparison of the fibrosis degree using acoustic radiation force impulse elastography and diffusion-weighted magnetic resonance imaging in chronic hepatitis cases

SUMMARY OBJECTIVE: The aim of this study was to investigate the correlation of fibrosis stages in cases of chronic hepatitis by comparing shear wave elastography and diffusion-weighted magnetic resonance imaging. METHODS: A total of 46 chronic hepatitis patients with an age range of 20-50 years were classified into three groups based on their fibrosis stages. Comparison group 1: the presence of fibrosis (S0 and S1≤); comparison group 2: the presence of significant fibrosis (≤S2 and S3≤); and comparison group 3: the presence of cirrhosis (≤S4 and S6). Shear wave velocities were measured by acoustic radiation force impulse elastography. Diffusion-weighted magnetic resonance imaging was performed on a 3.0 Tesla MRI device. RESULTS: In comparison group 1 (S0 and S1≤), the area under the curve, sensitivity, and specificity of acoustic radiation force impulse values were 0.784, 87, and 60%, respectively, while these values were 0.718, 80, and 66%, respectively, for apparent diffusion coefficient . In comparison group 2 (≤S2 and S3≤), the area under the curve, sensitivity, and specificity of acoustic radiation force impulse values were 0.917, 80, and 86%, respectively, and the apparent diffusion coefficient values were 0.778, 90, and 66%, respectively. In comparison group 3, the area under the curve, sensitivity, and specificity of acoustic radiation force impulse values were 0.977, 100, and 95%, respectively. There was no statistically significant difference between the apparent diffusion coefficient values of the cases in the three groups (p=0.132). CONCLUSION: Noninvasive methods are gaining importance day by day for staging hepatic fibrosis. Acoustic radiation force impulse elastography was evaluated as a more reliable examination than diffusion-weighted magnetic resonance imaging in revealing the presence of fibrosis, determining significant fibrosis, and diagnosing cirrhosis.

Cone beam computed tomographic evaluation of infraorbital canal protrusion into the maxillary sinus and its importance for endoscopic surgery

Abstract Objective: The aim of this retrospective study is to investigate the prevalence of Infraorbital Canal Protrusion (ICP) degree into the maxillary sinus and its relationship with variations in adjacent structures on Cone Beam Computed Tomography (CBCT) images. Methods: 350 CBCT images (700 Infraorbital Canal [IC]) were evaluated retrospectively. ICP was divided into 3 subtypes according to the protrusion degree. The correlation between IC types and variations in adjacent anatomical structures (Haller cell, middle nasal concha pneumatization, maxillary sinus mucosal thickening and septa) was evaluated. The distance between Infraorbital Canal and Cnine Root (IC-CR) was also measured. For type 3, measurements were performed on IC as the length of the bony septum from the IC to the Mxillary Sinus Wall (IC-MSW), the distance from the inferior orbital rim, where the IC begins to protrude into the maxillary sinus (IOR-ICP), the vertical distance from the IC to the Maxillary Sinus Roof (IC-MSR) and Floor (IC-MSF). Results: The prevalence of type 1, 2 and 3 was 62.9%, 29.1%, and 8% respectively. IC-CR was 10.2, 10.7 and 11.4 mm in type 1, 2 and 3, respectively. IC-MSW, IOR-ICP, IC-MSRand floor IC-MSF was 3.8, 10.9, 7.4 and 27.7mm, respectively. On the right and left side, statistically significant correlation was found between IC types and the presence of the Haller cell and sinus septa. But there was no significant correlation between IC types and middle concha pneumatization. Conclusion: Accurate diagnosis of ICP is very important in preventing infraorbital nerve damage in surgical procedures to be performed in the maxillary region. The results of this study could be a guide for surgical planning in this region. Level of evidence: Retrospective study.

Cone beam computed tomographic evaluation of infraorbital canal protrusion into the maxillary sinus and its importance for endoscopic surgery.

OBJECTIVE: The aim of this retrospective study is to investigate the prevalence of Infraorbital Canal Protrusion (ICP) degree into the maxillary sinus and its relationship with variations in adjacent structures on Cone Beam Computed Tomography (CBCT) images. METHODS: 350 CBCT images (700 Infraorbital Canal [IC]) were evaluated retrospectively. ICP was divided into 3 subtypes according to the protrusion degree. The correlation between IC types and variations in adjacent anatomical structures (Haller cell, middle nasal concha pneumatization, maxillary sinus mucosal thickening and septa) was evaluated. The distance between Infraorbital Canal and Cnine Root (IC-CR) was also measured. For type 3, measurements were performed on IC as the length of the bony septum from the IC to the Mxillary Sinus Wall (IC-MSW), the distance from the inferior orbital rim, where the IC begins to protrude into the maxillary sinus (IOR-ICP), the vertical distance from the IC to the Maxillary Sinus Roof (IC-MSR) and Floor (IC-MSF). RESULTS: The prevalence of type 1, 2 and 3 was 62.9%, 29.1%, and 8% respectively. IC-CR was 10.2, 10.7 and 11.4 mm in type 1, 2 and 3, respectively. IC-MSW, IOR-ICP, IC-MSR and floor IC-MSF was 3.8, 10.9, 7.4 and 27.7 mm, respectively. On the right and left side, statistically significant correlation was found between IC types and the presence of the Haller cell and sinus septa. But there was no significant correlation between IC types and middle concha pneumatization. CONCLUSION: Accurate diagnosis of ICP is very important in preventing infraorbital nerve damage in surgical procedures to be performed in the maxillary region. The results of this study could be a guide for surgical planning in this region. LEVEL OF EVIDENCE: Retrospective study.

Volumetric and morphological analysis of condyle and glenoid fossa on computed tomography.

AIM: The aim of this study was to evaluate temporomandibular joint (TMJ) condyle and glenoid fossa morphology with measurements on Computed Tomography (CT) and volumetric analysis using InVesalius software program. MATERIALS AND METHODS: 250 condyles in 125 patients (mean age: 40.64) was evaluated on CT. Length, width, and height of the condyle, condylar volume, the thickness of glenoid fossa (TGF), condyle surface area, anterior space (AS), superior space (SS), and posterior space (PS) were measured in this study. Two left and right sides of the jaw have been measured. Linear measurements were performed with the image analysis program (Image J, 1.4 v version, National Institutes of Health, Bethesda, MD). Volume and surface area measurements were performed with InVesalius software (CTI, Campinas, SãoPaulo, Brazil). RESULTS: To compare the dimensions of the condyle between males and females, there was only a significant difference in left AS and SS and no significant difference was found between males and females in other measured factors. There was a significant difference between the age groups and left SS. A significant difference was also found between the age groups and condylar height, condyle surface area, and condylar volume on both right and left sides. CONCLUSION: Evaluation of condylar morphology is important to assess the TMJ anomalies and bony changes. This study showed no significant differences between gender and all measured factors except in the left AS and SS. However, age factor had a major effect on the morphology.

Bibliometric Analysis of 50 Most Cited Articles on Odontomas

Abstract Objective: To identify the citation features and review articles on odontomas using bibliometric analysis. Material and Methods: A list of studies about odontoma was obtained by searching using the Scopus database. Abstracts or full texts were read and evaluated. After then, 50 most cited articles were achieved. Studies were categorized as citation numbers, citation density, journal name, article type, the affiliation of the first author and publication year. Descriptive statistics were used to analyze the results. Results: The most frequently cited article received 358 citations, while the least frequently cited article received 42 with a mean of 94.3 citations per article. The mean citation density was 5.13. The study with the highest citation density (12.31) was published in 2006. The highest citation number was found in the 2000s following the 1990s. The 50 most cited articles were published from 1971 to 2011, with 84% (42 of 50) published after 1990. USA (n = 9) and Brazil (n = 6) were the two most contributing countries. According to article type, there were eight (16%) review articles. Conclusion: The USA found to have a strong influence on research about odontoma, followed by Brazil. All researches were reported in English, and most of them were published in good quality journals (AU).