How Plasmon Ag Nanoparticles can Enhance the Power Performance of a Thermoelectric Generator.

The development of wearable thermoelectric generators (wTEG) represents a promising strategy to replace batteries and supercapacitors required to supply electrical energy for portable electronic devices. However, the main drawback of wTEGs is that the thermal gradient between the skin and the ambient is minimal, reducing the power output produced by the generator. Therefore, it is necessary to improve the thermal management of wTEG in order to increase its efficiency. This work deals with the preparation of a thermoelectric generator that harnesses the plasmonic heating effect to enhance the thermal gradient of the final device. The thermoelectric layer is created through the in situ polymerization of terthiophene (3T) within a polyurethane matrix, utilizing silver (Ag) (I) and copper (II) perchlorate as oxidants. The plasmonic film, composed of Ag-NP (nanoparticles), is formed via photocatalytic reduction of silver nitrate in the presence of titanium oxide. These layers are then meticulously assembled to yield the hybrid plasmonic/thermoelectric generator.

Coating of Felt Fibers with Carbon Nanotubes and PEDOT with Different Counterions: Temperature and Electrical Field Effects.

The use of wearable devices has promoted new ways of integrating these devices, one of which is through the development of smart textiles. Smart textiles must possess the mechanical and electrical properties necessary for their functionality. This study explores the impact of polymer-felt microstructure variations on their morphology, electrical, and mechanical properties. The application of thermal treatment, along with an electric field, leads to a substantial structural reorganization of the molecular chains within pristine felt. This results in a system of nanofibrils coated with MWCNT-PEDOT, characterized by highly ordered counterions that facilitate the flow of charge carriers. Both temperature and an electric field induce reversible microstructural changes in pristine felt and irreversible changes in coated felt samples. Furthermore, electropolymerization of PEDOT significantly enhances electrical conductivity, with PEDOT:BTFMSI-coated fabric exhibiting the highest conductivity.

Thermoelectric Inks and Power Factor Tunability in Hybrid Films through All Solution Process.

Thermoelectric (TE) materials can have a strong benefit to harvest thermal energy if they can be applied to large areas without losing their performance over time. One way of achieving large-area films is through hybrid materials, where a blend of TE materials with polymers can be applied as coating. Here, we present the development of all solution-processed TE ink and hybrid films with varying contents of TE Sb2Te3 and Bi2Te3 nanomaterials, along with their characterization. Using (1-methoxy-2-propyl) acetate (MPA) as the solvent and poly (methyl methacrylate) as the durable polymer, large-area homogeneous hybrid TE films have been fabricated. The conductivity and TE power factor improve with nanoparticle volume fraction, peaking around 60-70% solid material fill factor. For larger fill factors, the conductivity drops, possibly because of an increase in the interface resistance through interface defects and reduced connectivity between the platelets in the medium. The use of dodecanethiol (DDT) as an additive in the ink formulation enabled an improvement in the electrical conductivity through modification of interfaces and the compactness of the resultant films, leading to a 4-5 times increase in the power factor for both p- and n-type hybrid TE films, respectively. The observed trends were captured by combining percolation theory with analytical resistive theory, with the above assumption of increasing interface resistance and connectivity with polymer volume reduction. The results obtained on these hybrid films open a new low-cost route to produce and implement TE coatings on a large scale, which can be ideal for driving flexible, large-area energy scavenging technologies such as personal medical devices and the IoT.

Electrochemical Synthesis of an Organic Thermoelectric Power Generator.

Energy harvesting through residual heat is considered one of the most promising ways to power wearable devices. In this work, thermoelectric textiles were prepared by coating the fabrics, first with multiple-wall carbon nanotubes (MWCNTs) by using the layer-by-layer technique and second with poly(3,4-ethylenedioxythiophene) (PEDOT) deposited by electrochemical polymerization. Sodium deoxycholate and poly(diallyldimethylammonium chloride) were used as stabilizers to prepare the aqueous dispersions of MWCNTs. The electrochemical deposition of PEDOT on the MWCNT-coated fabric was carried out in a three-electrode electrochemical cell. The polymerization of PEDOT on the fabric increased the electrical conductivity by ten orders of magnitude (through the plane), establishing an excellent path for electric transport across the fabrics. In addition, the fibers showed a Seebeck coefficient of 14.3 µV K-1, which is characteristic of highly doped PEDOT. As a proof of concept, several thermoelectric modules were made with different elements based on the coated acrylic and cotton fabrics. The best generator made of 30 thermoelectric elements using acrylic fabrics exhibited an output power of 0.9 µW with a temperature difference of 31 K.