Celecoxib-Loaded Self-micellizing Solid Dispersion Suppresses Its Delayed Absorption in Rats with Impaired Gastrointestinal Motility.

The aim of this study was to develop a self-micellizing solid dispersion of celecoxib (SMSD/CEL) with enhanced dissolution to suppress a delay in absorption under impairment of gastrointestinal (GI) secretion and motility induced by severe pain. Soluplus®-based SMSD/CEL was prepared by lyophilization and physiochemically characterized. A pharmacokinetic study of orally-dosed CEL samples was carried out in rats with propantheline (PPT)-induced the impairment of GI secretion and motility. SMSD/CEL was micellized in aqueous media with a mean diameter of 153 nm, and it showed improved dissolution behavior of CEL under acidic conditions with 2.1-fold higher dissolved CEL at 120 min than crystalline CEL. SMSD/CEL was found to be in an amorphous state, and there was no significant crystallization even after storage under accelerated conditions for 8 weeks, indicating relatively high storage stability of the amorphous form. Orally-dosed crystalline CEL in PPT-treated rats showed a delayed mean absorption time (MAT) and area under the curve of plasma concentration versus time from 0 to 4 h (AUC0-4) was reduced to 12% compared with that in normal rats, whereas SMSD/CEL suppressed the delay and decrease of absorption in PPT-treated rats. From these findings, SMSD/CEL might be efficacious to suppress poor and delayed absorption of CEL for better pain medication in the presence of impaired GI secretion and motility associated with severe pain.

Reactive oxygen species (ROS) assay-based photosafety screening for complex ingredients: Modification of the ROS assay protocol.

A reactive oxygen species (ROS) assay has been widely used for photosafety assessment; however, the phototoxic potential of complex materials, including plant extracts, essential oils, and functional polymers, is unevaluable because of their undefined molecular weights. The present study was undertaken to modify the ROS assay protocol for evaluating phototoxic potentials of those materials with use of their apparent molecular weight (aMw). On preparing sample solutions for the ROS assay, aMw ranging from 150 to 350 was tentatively employed for test substances. The modified ROS assays were applied to 45 phototoxic and 19 non-phototoxic substances, including 44 chemicals and 20 complex materials (plant extracts) for clarification of the predictive performance. Generation of ROS from photo-irradiated samples tended to increase as aMW grew, resulting in the largest number of false-positive predictions at aMW of 350. Some false-negative predictions were also observed when aMW was set at 200 or less. At aMw of 250, all tested phototoxic substances could be correctly identified as photoreactive with no false-negative predictions. Based on these observations, aMw of 250 was found to be suitable for the ROS assay on complex materials, and the sensitivity, specificity, and positive and negative predictivity for the proposed ROS assay were calculated to be 100, 52.6, 83.3, and 100%, respectively. Thus, the proposed approach may be efficacious for predicting phototoxic potentials of complex materials and contribute to the development of new products with a wide photosafety margin.

Correction: Sato et al. Design and Characterizations of Inhalable Poly(lactic-co-glycolic acid) Microspheres Prepared by the Fine Droplet Drying Process for a Sustained Effect of Salmon Calcitonin. Molecules 2020, 25, 1311.

The author wishes to make the following correction to this paper [...].

In chemico sequential testing strategy for assessing the photoallegic potential.

Several non-animal testing methods to assess photoallergic potential have been developed so far, while none of them have yet to be validated and regulatory accepted. Currently, some photoreactivity assays such as UV-VIS spectral analysis and ROS assay are generally used for initial photosafety assessments because of their high sensitivity. However, they have a low specificity, generating a high percentage of false positive results, and the development of a follow-up assessment method is desired. Therefore, this study aimed to develop an in chemico photoallergy testing method, photo-direct peptide reactivity assay (photo-DPRA). Based on photosafety information, 34 photoallergens and 16 non-photoallergens were selected and subjected to UV-VIS spectral analysis, ROS/micellar ROS assays, photo-DPRA, sequential testing strategy (STS) consisting of all three methods, and 3T3 neutral red uptake phototoxicity testing (3T3 NRU PT). Combination of the methods addressing the key events of photoallergy exhibited high prediction performance. Our results showed the proposed strategy would be useful to predict the photoallergic potential of chemicals as the follow-up assessment for false positive chemicals by UV/VIS spectral analysis and ROS assay.

An approach to evaluate metabolite-related phototoxicity with combined use of photochemical properties and skin deposition.

Some chemicals have been reported to cause metabolite-related phototoxicity, and this study aimed to verify the applicability of photosafety assessment based on photochemical and pharmacokinetic properties to evaluate the metabolite-related phototoxicity risk. The phototoxic risk of imipramine (IMI) and its metabolite, desipramine (DMI), was evaluated by photochemical and pharmacokinetic analyses. IMI and DMI were found to have similar photoreactivities based on the generation of reactive oxygen species. The skin concentrations of IMI and DMI reached maximal levels at approximately 1 and 4 h, respectively, after oral administration of IMI (10 mg/kg), and DMI showed high skin deposition compared with IMI. According to the results, DMI was identified as a contributor to phototoxicity induced by orally-taken IMI. In in vivo phototoxicity testing, ultraviolet A irradiation from 3 to 6 h after oral administration of IMI (100 mg/kg) caused more potent phototoxic reactions compared with that from 0 to 3 h, and DMI yielded by metabolism of IMI would be associated with phototoxic reactions caused by orally-administered IMI. In addition to the data on IMI, a parent chemical, photochemical and pharmacokinetic profiling of its metabolite, DMI, led to reliable phototoxicity prediction of orally-administered IMI. Thus, characterization of the photosafety of metabolites would generate reliable information on the phototoxicity risk of parent chemicals, and the proposed strategy may facilitate comprehensive photosafety assessment of drug candidates in pharmaceutical development.

Novel approach for attenuation of pirfenidone-induced digestive symptoms: a respirable powder formulation of pirfenidone.

Aim: Orally taken pirfenidone (PFD) often causes digestive symptoms. A respirable powder formulation of PFD (PFD-RP) was previously developed, and this study aimed to verify the risk of digestive symptoms after insufflation of PFD-RP. Materials & methods: Intestinal motility and gastrointestinal exposure levels was evaluated in PFD-RP (0.3-mg PFD/rat: a pharmacologically effective dose) and orally taken PFD (10-100 mg/kg) groups. Results & conclusion: Orally taken PFD at doses above 30 mg/kg significantly inhibited intestinal motility. In contrast, insufflated PFD-RP led to comparable intestinal motility in control group, and gastrointestinal exposure levels in PFD-RP group were markedly lower than those in orally taken PFD groups. Inhalation therapy using PFD-RP may be efficacious to reduce the risk of digestive symptoms frequently induced by orally taken PFD.

Self-Emulsifying Drug Delivery System of Celecoxib for Avoiding Delayed Oral Absorption in Rats with Impaired Gastric Motility.

This study aimed to develop a self-emulsifying drug delivery system (SEDDS) of celecoxib (CEL) for suppressed delay in oral absorption under impaired gastric motility. A pseudo-ternary phase diagram was constructed for the determination of the optimal component ratio in SEDDS of CEL (SEDDS/CEL), and the SEDDS/CEL was physicochemically characterized. A pharmacokinetic study on orally dosed CEL samples (5-mg CEL/kg) was carried out in normal and propantheline (PPT)-treated rats to mimic impaired gastric motility. SEDDS/CEL rapidly formed a fine emulsion with a mean size of 147 nm in distilled water and significantly improved the dissolution behavior of CEL under pH 1.2 condition with a 20-fold higher dissolved amount than crystalline CEL. In normal rats, orally dosed SEDDS/CEL provided a 4.6-fold higher systemic exposure than that of crystalline CEL, due to the improved dissolution properties of CEL. Crystalline CEL showed delayed and decreased oral absorption of CEL in PPT-treated rats as evidenced by a 6.9-h-delayed mean absorption time and only 12% of the systemic exposure of CEL compared with those in normal rats. In contrast, SEDDS/CEL enhanced the oral absorption of CEL with a 14.6-fold higher systemic exposure with significant suppression of delay in absorption than crystalline CEL even in PPT-treated rats. SEDDS/CEL could be an efficacious option for suppressing delay in CEL absorption even under impairment of gastric motility, possibly leading to rapid and reproducible management of severe acute pain.

Design and Characterizations of Inhalable Poly(lactic-co-glycolic acid) Microspheres Prepared by the Fine Droplet Drying Process for a Sustained Effect of Salmon Calcitonin.

The present study aimed to develop inhalable poly (lactic-co-glycolic acid) (PLGA)-based microparticles of salmon calcitonin (sCT) for sustained pharmacological action by the fine droplet drying (FDD) process, a novel powderization technique employing printing technologies. PLGA was selected as a biodegradable carrier polymer for sustained-release particles of sCT (sCT/SR), and physicochemical characterizations of sCT/SR were conducted. To estimate the in vivo efficacy of the sCT/SR respirable powder (sCT/SR-RP), plasma calcium levels were measured after intratracheal administration in rats. The particle size of sCT/SR was 3.6 µm, and the SPAN factor, one of the parameters to present the uniformity of particle size distribution, was calculated to be 0.65. In the evaluation of the conformational structure of sCT, no significant changes were observed in sCT/SR even after the FDD process. The drug release from sCT/SR showed a biphasic pattern with an initial burst and slow diffusion in simulated lung fluid. sCT/SR-RP showed fine inhalation performance, as evidenced by a fine particle fraction value of 28% in the cascade impactor analysis. After the insufflation of sCT samples (40 µg-sCT/kg) in rats, sCT/SR-RP could enhance and prolong the hypocalcemic action of sCT possibly due to the sustained release and pulmonary absorption of sCT. From these observations, the strategic application of the FDD process could be efficacious to provide PLGA-based inhalable formulations of sCT, as well as other therapeutic peptides, to enhance their biopharmaceutical potentials.

Strategic photosafety screening system consisting of in chemico photoreactivity and in vitro skin exposure for quinolone derivatives.

The main objective of this study was to verify the applicable domain of a proposed photosafety screening system, consisting of a reactive oxygen species (ROS) assay and in vitro skin permeation test, for dermally-applied chemicals. Quinolones (QNLs) were selected as test compounds, including enoxacin, flumequine, moxifloxacin, nalidixic acid, orbifloxacin, and oxolinic acid. The ROS assay and in vitro skin permeation test were employed to evaluate photoreactivity and skin deposition of QNLs, respectively. All QNLs exhibited significant ROS generation on exposure to simulated sunlight; in particular, enoxacin was indicative of potent photoreactivity compared with the other 5 QNLs. Steady-state concentration values of flumequine and nalidixic acid were calculated to be 5.0 and 8.2 µg/mL, respectively, and higher than those of the other QNLs. Based on the photoreactivity and skin exposure of QNLs, the phototoxic risk was ranked, and the predicted phototoxic risk by the proposed system was mostly in agreement with observed in vivo phototoxicity, suggesting the applicability of the proposed strategy to photosafety assessment of QNLs. The proposed screening would be efficacious to predict phototoxic risk of dermally-applied chemicals.

Phototoxic risk assessment of dermally-applied chemicals with structural variety based on photoreactivity and skin deposition.

Combined use of photochemical and pharmacokinetic (PK) data for phototoxic risk assessment was previously proposed, and the system provided reliable phototoxic risk predictions of chemicals in same chemical series. This study aimed to verify the feasibility of the screening system for phototoxic risk assessment on dermally-applied chemicals with wide structural diversity, as a first attempt. Photochemical properties of test chemicals, 2-acetonaphthalene, 4'-methylbenzylidene camphor, 6-methylcoumarin, methyl N-methylanthranilate, and sulisobenzone, were evaluated in terms of UV absorption and reactive oxygen species (ROS) generation, and PK profiles of the test chemicals in rat skin were characterized after dermal co-application. All test chemicals showed strong UVA/B absorption with molar extinction coefficients of over 3000 M-1⋅cm-1, and irradiated 2-acetonaphthalene, 6-methylcoumarin, and methyl N-methylanthranilate exhibited significant ROS generation. Dermally-applied 2-acetonaphthalene and 4'-methylbenzylidene camphor indicated high and long-lasting skin deposition compared with the other test chemicals. Based on the photochemical and PK data, 2-acetonaphthalene was predicted to have potent phototoxic risk. The predicted phototoxic risk of the test chemicals by integration of obtained data was mostly consistent with their in vivo phototoxicity observed in rat skin. The screening strategy employing photochemical and PK data would have high prediction capacity and wide applicability for photosafety evaluation of chemicals.

Polymeric Nanocarriers With Mucus-Diffusive and Mucus-Adhesive Properties to Control Pharmacokinetic Behavior of Orally Dosed Cyclosporine A.

The present study develops cyclosporine A (CsA)-loaded polymeric nanocarriers with mucus-diffusive and mucus-adhesive potential to control pharmacokinetic behavior after oral administration for the treatment of inflammatory bowel diseases (IBD). CsA-loaded nanocarriers consisting of polystyrene-block-polyethylene glycol (PEG-CsA) and polystyrene-block-polyacrylic acid (PAA-CsA) were prepared by a flash nanoprecipitation. Both nanocarriers showed redispersibility from lyophilized powder back to uniform nanocarrier with a mean diameter of approximately 150 nm. The nanocarriers exhibited significantly improved release behavior of CsA under pH 6.8 condition compared. A test of mucodiffusion, using artificial mucus, demonstrated the mucus-diffusive and mucus-adhesive potential of PEG-CsA and PAA-CsA, respectively, dependent on the lack of electrostatic interactions between the surface-coated polymer and mucin. Oral administrations of PEG-CsA and PAA-CsA (10 mg-CsA/kg) in rats resulted in significant improvements of absorption, as evidenced by 50- and 25-fold higher bioavailability than crude CsA, respectively. PAA-CsA exhibited more sustained and slower absorption process of CsA than PEG-CsA because of the different diffusion behavior within the mucus layer. In the rat model of IBD, significant suppression of inflammatory symptoms could be achieved by oral treatment with both CsA nanoparticles. These polymeric nanocarriers are promising dosage options to control pharmacokinetic behavior of orally dosed CsA, contributing to the development of safe and effective treatment for IBD.

A new photosafety screening strategy based on in chemico photoreactivity and in vitro skin exposure for dermally-applied chemicals.

This study involved an attempt to establish a new photosafety screening system for dermally-applied chemicals consisting of a reactive oxygen species (ROS) assay and an in vitro skin permeation test. The ROS assay was undertaken to evaluate photoreactivity of six test compounds, acridine (ACD), furosemide (FSM), hexachlorophene (HCP), 8-methoxypsoralen (MOP), norfloxacin (NFX), and promethazine (PMZ), and the in vitro skin permeation test was conducted to obtain steady-state concentration (Css) values of test compounds in removed rat skin. All test compounds were photoreactive based on ROS generation under simulated sunlight exposure. In particular, ROS generation from ACD was high compared with other test compounds, and photoreactivity of ACD was deduced to be potent. The Css values of ACD, HCP, MOP, and PMZ were over 50 µg/mL, and skin exposure to FSM and NFX was found to be extremely low. Upon these findings, ACD was judged to be highly phototoxic. The rank for phototoxic risk of test compounds based on photoreactivity and in vitro skin exposure was mostly in agreement with outcomes on their in vivo phototoxicity in rats. The proposed strategy, an alternative to animal testing, would be efficacious for photosafety evaluation of drug candidates in early stages of pharmaceutical development.

Cyclosporine a-loaded UniORV®: Pharmacokinetic and safety characterization.

This study aimed to improve pharmacokinetic behavior and reduce safety concern of cyclosporine A (CsA) by UniORV® approach, a new platform for solid dispersion formulation. CsA-loaded UniORV® (UO/CsA) was prepared, and its physicochemical properties were evaluated in terms of droplet size distribution and dissolution. The pharmacokinetic behavior and nephrotoxic potential of orally-dosed CsA samples (10 mg-CsA/kg) were assessed in rats. After re-dispersion of UO/CsA in water, fine droplets were observed, and the mean diameter of droplets was calculated to be 45 nm. The UniORV® approach markedly improved the dissolution behavior compared with amorphous CsA in water. After oral administration of amorphous CsA, Neoral®, and UO/CsA in rats, UO/CsA exhibited a 32% lower maximum concentration and 5.1 h longer mean residence time than those of Neoral®. The oral absorption of CsA formulations was higher compared with amorphous CsA; in particular, the oral bioavailability of UO/CsA was 71-fold higher than that of amorphous CsA. Neoral® elicited nephrotoxicity with plasma creatinine level of 1.29 mg/dL; however, Neoral®-induced nephrotoxicity was attenuated in UO/CsA, as evidenced by a 15% lower plasma creatinine level of UO/CsA than that of Neoral®. From these findings, UO/CsA might be a promising dosage form with improved biopharmaceutical properties of CsA.

Photochemically stabilized formulation of dacarbazine with reduced production of algogenic photodegradants.

The present study aimed to develop a photochemically stabilized formulation of dacarbazine [5-(3,3-dimethyl-1-triazeno)imidazole-4-carboxamide; DTIC] for reducing the production of algogenic photodegradant (5-diazoimidazole-4-carboxamide; Diazo-IC). Photochemical properties of DTIC were characterized by UV-visible light spectral analysis, reactive oxygen species (ROS) assay, and photostability testing. A pharmacokinetic study was conducted after intravenous administration of DTIC formulations (1 mg-DTIC/kg) to rats. DTIC exhibited strong absorption in the UVA range, and photoirradiated DTIC exhibited marked ROS generation. Thus, DTIC had high photoreactive potential. After exposure of DTIC (1 mM) to simulated sunlight (250 W/m2) for 3 min, remaining DTIC and yielded Diazo-IC were estimated to be ca. 230 µM and 600 µM, respectively. The addition of radical scavenger (1 mM), including l-ascorbic acid, l-cysteine (Cys), l-histidine, D-mannitol, l-tryptophan, or l-tyrosine, to DTIC (1 mM) could attenuate DTIC photoreactions, and in particular, the addition of Cys to DTIC brought ca. 34% and 86% inhibition of DTIC photodegradation and Diazo-IC photogeneration, respectively. There were no significant differences in the calculated pharmacokinetic parameters of DTIC between DTIC and DTIC with Cys (0.67 mg/kg). From these findings, the supplementary use of Cys would be an effective approach to improve the photostability of DTIC with less production of Diazo-IC.

Photochemical and Pharmacokinetic Characterization of Orally Administered Chemicals to Evaluate Phototoxic Risk.

This study aimed to verify the applicability of a proposed photosafety screening system based on a reactive oxygen species (ROS) assay and a cassette-dosing pharmacokinetic (PK) study to chemicals with wide structural diversity. The orally taken chemicals, erythromycin, gatifloxacin, 8-methoxypsoralen (MOP), pirfenidone (PFD), trifluoperazine (TFP), and voriconazole (VRZ), were selected as test compounds. The ROS assay was conducted to evaluate their photoreactivity, and all test compounds excluding erythromycin generated significant ROS under simulated sunlight exposure. According to the ROS data, TFP had potent photoreactivity, and the photoreactivity of 4 other compounds was judged to be moderate. Regarding the oral cassette-dosing PK test in rats, the skin deposition of MOP, PFD, and VRZ was relatively high, and gatifloxacin and TFP exhibited moderate skin deposition properties. Based on the ROS and PK data of test compounds, PFD and TFP were judged to be potent phototoxic compounds, and MOP and VRZ were deduced to have phototoxic risk. The predicted phototoxic risk of test compounds by proposed screening was mostly in agreement with observed in vivo phototoxicity in the rat skin. The proposed screening system could provide reliable photosafety information on orally administered compounds with wide structural diversity.

Physicochemical and biopharmaceutical characterization of celecoxib nanoparticle: Avoidance of delayed oral absorption caused by impaired gastric motility.

The present study aimed to develop a celecoxib (CEL) nanoparticle with improved dissolution/dispersion and consistent absorption even in the presence of impaired gastric motility. CEL was pulverized by a wet-milling with hydroxypropyl cellulose (HPC), and the prepared nanoparticles were physicochemically characterized after freeze-drying. CEL nanoparticle with HPC-SSL (NP/CEL) exhibited better dissolution/dispersion behavior in pH1.2 solution compared with CEL nanoparticles with other polymers, as evidenced by a 21.8-fold higher initial dissolution/dispersion rate than crystalline CEL. The mean particle diameter of water suspended-NP/CEL was 250 nm, and the CEL nanoparticle existed in an amorphous state. Even after storage at 40 °C for 4 weeks, there were no significant changes in the dissolution/dispersion behavior. Oral absorption of CEL samples (5 mg-CEL/kg) was evaluated in normal and propantheline (PPT)-treated rats with simulated gastric motility impairment. In PPT-treated rats, oral crystalline CEL led to a decrease in oral absorption by 12% of the AUC0-4 compared with that in normal rats, whereas NP/CEL suppressed the pharmacokinetic transition of CEL by 43% of the AUC0-4 due to the improved dissolution/dispersion behavior of CEL. The NP/CEL system might be promising to avoid decreased absorption of CEL caused by impaired gastric motility.

Improved biopharmaceutical properties of carvedilol employing α-tocopheryl polyethylene glycol 1000 succinate-based self-emulsifying drug delivery system.

The main objective of this study was to develop a self-emulsifying drug delivery system (SEDDS) of carvedilol (CAR) with improved oral absorption and hepatoprotective properties. SEDDS-CAR was prepared based on d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) and physicochemically characterized. Pharmacokinetic behaviors after the oral administration of CAR samples in rats were evaluated to clarify the possible enhancement of the oral absorption of CAR. The hepatoprotective effects of orally dosed CAR samples were assessed in a rat model of acute hepatic injury induced by carbon tetrachloride (CCl4). SEDDS-CAR showed the immediate formation of fine micelles with a mean droplet size of 84 nm when introduced in aqueous media. SEDDS-CAR improved the dissolution behavior of CAR in distilled water as evidenced by at least five-fold higher solubility than the equilibrium solubility of CAR. After the single oral administration of SEDDS-CAR (10 mg-CAR/kg) in rats, enhanced CAR exposure was observed with an increase of AUC0-∞ showing a 2.5-fold increase compared with crystalline CAR. In CCl4-treated rats, orally dosed SEDDS-CAR (10 mg-CAR/kg, p.o.) led to 91.8 and 91.2% reductions of ALT and AST, respectively; however, crystalline CAR was found to be less effective. From these findings, SEDDS-CAR might be an efficacious oral dosage option for enhancing the hepatoprotective potential of CAR.

Supersaturable Self-Emulsifying Drug Delivery System of Krill Oil with Improved Oral Absorption and Hypotriglyceridemic Function.

This study aimed to develop a supersaturable self-emulsifying drug delivery system (S-SEDDS) of krill oil (KO), a rich source of docosahexaenoic acid and eicosapentaenoic acid (EPA), to improve its hypotriglyceridemic function. S-SEDDS of KO (KO/S-SEDDS) was prepared by the addition of lysolecithin, glycerin, and hydroxypropyl methylcellulose (HPMC). Self-emulsifying drug delivery system of KO (KO/SEDDS) and KO with HPMC (KO/HPMC) were also prepared for comparison purposes. The physicochemical and pharmacokinetic properties of KO samples were characterized, and the hypotriglyceridemic function of KO/S-SEDDS was evaluated. Micronized droplets in KO/SEDDS and KO/S-SEDDS with a mean diameter of ca. 270 nm could be observed in comparison to KO and KO/HPMC. Both KO/HPMC and KO/S-SEDDS tended to enhance the dissolution behavior of KO, and the S-SEDDS formulation improved the dissolution behavior of KO as a result of micronized droplets and the addition of HPMC. KO/S-SEDDS (60 mg of EPA/kg) improved the oral absorption of KO based on the pharmacokinetic profiling of EPA, and repeated oral administration of KO/S-SEDDS (250 mg of KO kg-1 day-1) for 7 days had a potent hypotriglyceridemic effect on rats with corn-oil-induced hypertriglyceridemia compared to orally administered KO. On the basis of these findings, the S-SEDDS approach might be an efficacious dosage option to enhance the nutraceutical properties of KO.

Amorphous solid dispersions of carvedilol along with pH-modifiers improved pharmacokinetic properties under hypochlorhydoria.

Carvedilol (CAR) belongs to biopharmaceutics classification system class-II drugs, with poor aqueous solubility and pH-dependent solubility. The present study aimed to develop a novel amorphous solid dispersion (ASD) of CAR with acidic counter ions for pH modifications in microenvironment to improve the pharmacokinetic properties under hypochlorhydric conditions. CAR-ASD was prepared by freeze-drying in combination with counter ions and hydroxypropyl cellulose, and their physicochemical properties including dissolution behavior, storage stability, and photostability were characterized. Pharmacokinetic studies were carried out after oral administration of CAR samples in both normal and omeprazole-treated (30 mg/kg, p.o.) rats as a hypochlorhydria model. Among the tested six counter ions, citric acid (CA) was found to be a preferable pH-modifier of CAR with respect to the dissolution profile and photostability (both potency and colorimetric evaluation). In CAR-ASD formulation with 50% loading of CA (CAR-ASD/CA50), amorphization of CAR was observed during the preparation process. After the oral administration of crystalline CAR in rats under hypochlorhydric condition, there was a 34.4% reduction in the systemic exposure of CAR compared with that in normal rats. However, orally-dosed CAR-ASD/CA50 resulted in limited alterations of pharmacokinetic behavior between normal and omeprazole-treated rats. From these findings, addition of CA as pH-modifier in CAR-ASD might provide consistent pharmacokinetic behavior of CAR even under hypochlorhydric conditions.

Enhanced biopharmaceutical effects of tranilast on experimental colitis model with use of self-micellizing solid dispersion technology.

The present study aimed to clarify the applicability of a self-micellizing solid dispersion of tranilast (SMSD/TL) to the treatment of inflammatory bowel diseases (IBD) using an experimental colitis model. SMSD/TL with several loading amounts ranging from 10 to 50% was prepared using a wet-milling system. The physicochemical properties of SMSD/TL were evaluated in terms of the dissolution behavior, morphology, and particle size distribution. Animal studies were conducted to evaluate oral bioavailability in rats and anti-inflammatory effects in a rat model of chemically induced colitis. SMSD/TL with drug loading of 15% (SMSD/TL15) showed enhanced dissolution behavior at pH 1.2, compared with other tested other formulations. After the dispersion of SMSD/TL15 in deionized water, fine micelles formed with an average diameter of 137 nm. SMSD/TL15 (10 mg-TL/kg) exhibited about 147- and 34-fold greater value for Cmax and the area under the curve of plasma concentration vs. time than crystalline TL, respectively. Although the anti-inflammatory effect on the colitis model was very limited in the crystalline TL (2 mg/kg) group, inflammatory events, such as myeloperoxidase activity and thickening of the submucosa in colon tissues, were significantly suppressed in the SMSD/TL15 (2 mg-TL/kg) group. Based on these findings, SMSD/TL might be a more efficacious dosage option for improved IBD treatment.