Reductive biotransformation of tetrachloroethene to ethene during anaerobic degradation of toluene: experimental evidence and kinetics.

Reductive biotransformation of tetrachloroethene (PCE) to ethene occurred during anaerobic degradation of toluene in an enrichment culture. Ethene was detected as a dominant daughter product of PCE dechlorination with negligible accumulation of other partially chlorinated ethenes. PCE dechlorination was linked to toluene degradation, as evidenced by the findings that PCE dechlorination was limited in the absence of toluene but was restored with a spike of toluene again in the cultures. PCE was effectively dechlorinated in cultures amended with a wide range of concentrations of PCE and toluene. PCE dechlorination can be described by a Monod-like equation but followed a zero-order kinetic at high levels of PCE. In addition to toluene, benzoate and lactate were also able to be used as sole electron donors for reductive dechlorination of PCE in the cultures. In terms of dechlorination rates, lactate was the best electron donor followed by benzoate and then toluene. The kinetic characteristics of PCE dechlorination were retained in the cultures regardless of electron donors used, but the kinetic constant values were unique to each electron donor. The dechlorination rate was found to be closely correlated with the level of H2 produced during fermentation of the three organic compounds. Nitrate and sulfate were observed to be favorable electron acceptors in this culture, and their presence completely blocked electron flow to PCE. However, the presence of nitrate and sulfate did not destroy the capability of PCE dechlorination by the culture. PCE dechlorination was immediately reestablished after depletion of nitrate and sulfate in the culture. This anaerobic process provides an opportunity for concurrent remediation of chlorinated solvents and certain fuel hydrocarbons, and recognition of this process is also important in understanding the subsurface fate and transport of these contaminants under natural conditions.

Field evaluation of the solvent extraction residual biotreatment technology.

The Solvent Extraction Residual Biotreatment (SERB) technology was evaluated at a former dry cleaner site in Jacksonville, FL, where an area of tetrachloroethylene (PCE) contamination was identified. The SERB technology is a treatmenttrain approach for complete site restoration, which combines an active in situ dense nonaqueous-phase liquid (DNAPL) removal technology, cosolvent extraction, with a passive enhanced in situ bioremediation technology, reductive dechlorination. During the in situ cosolvent extraction test, approximately 34 kL of 95% ethanol/5% water (v:v) was flushed through the contaminated zone, which removed approximately 60% of the estimated PCE mass. Approximately 2.72 kL of ethanol was left in the subsurface, which provided electron donorfor enhancement of biological processes in the source zone and downgradient areas. Quarterly groundwater monitoring for over 3 yr showed decreasing concentrations of PCE in the source zone from initial values of 4-350 microM to less than 150 microM during the last sampling event. Initially there was little to no daughter product formation in the source zone, but after 3 yr, measured concentrations were 242 microM for cis-dichloroethylene (cis-DCE), 13 microM for vinyl chloride, and 0.43 microM for ethene. In conjunction with the production of dissolved methane and hydrogen and the removal of sulfate, these measurements indicate that in situ biotransformations were enhanced in areas exposed to the residual ethanol. First-order rate constants calculated from concentration data for individual wells ranged from -0.63 to -2.14 yr(-1) for PCE removal and from 0.88 to 2.39 yr(-1) for cis-DCE formation. First-order rate constants based on the change in total mass estimated from contour plots of the groundwater concentration data were 0.75 yr(-1) for cis-DCE, -0.50 yr(-1) for PCE, and -0.33 yr(-1) for ethanol. Although these attenuation rate constants include additional processes, such as sorption, dispersion, and advection, they provide an indication of the overall system dynamics. Evaluation of the groundwater data from the former dry cleaner site showed that cosolvent flushing systems can be designed and utilized to aid in the enhancement of biodegradation processes at DNAPL sites.

Long-term performance of permeable reactive barriers using zero-valent iron: geochemical and microbiological effects.

Geochemical and microbiological factors that control long-term performance of subsurface permeable reactive barriers were evaluated at the Elizabeth City, North Carolina, and the Denver Federal Center, Colorado, sites. These ground water treatment systems use zero-valent iron filings (Peerless Metal Powders Inc.) to intercept and remediate chlorinated hydrocarbon compounds at the Denver Federal Center (funnel-and-gate system) and overlapping plumes of hexavalent chromium and chlorinated hydrocarbons at Elizabeth City (continuous wall system). Zero-valent iron at both sites is a long-term sink for carbon, sulfur, calcium, silicon, nitrogen, and magnesium. After about four years of operation, the average rates of inorganic carbon (IC) and sulfur (S) accumulation are 0.09 and 0.02 kg/m2/year, respectively, at Elizabeth City where upgradient waters contain <400 mg/L of total dissolved solids (TDS). At the Denver Federal Center site, upgradient ground water contains 1000 to 1200 mg/L TDS and rates of IC and S accumulation are as high as 2.16 and 0.80 kg/m2/year, respectively. At both sites, consistent patterns of spatially variable mineral precipitation and microbial activity are observed. Mineral precipitates and microbial biomass accumulate the fastest near the upgradient aquifer-Fe0 interface. Maximum net reductions in porosity due to the accumulation of sulfur and inorganic carbon precipitates range from 0.032 at Elizabeth City to 0.062 at the Denver Federal Center (gate 2) after about four years. Although pore space has been lost due the accumulation of authigenic components, neither site shows evidence of pervasive pore clogging after four years of operation.

Water quality at five marinas in Lake Texoma as related to methyl tert-butyl ether (MTBE).

Water quality in five marinas on Lake Texoma, located on the Oklahoma and Texas border, was monitored between June 1999 and November 2000. Focus was to evaluate lake water associated with marinas for methyl tert-butyl ether (MTBE). Lake water was collected at locations identified as marina entrance, gasoline filling station, and boat dock. Occurrence of MTBE showed a direct seasonal trend with recreational boating activity at marina areas. There was a positive correlation with powerboat usage ratio, which was directly related to the gallons of gasoline sold. Sampling before and after the high boat use holiday weekends determined the apparent influence of powerboat activity on MTBE contamination. Boat dock locations were the most sensitive sites to MTBE contamination, possibly due to gasoline spillage during engine startup. The most common compound of the BTEX series found with MTBE was toluene and co-occurrence was most frequent at gasoline filling stations.