Determination of lindane in surface water samples and its degradation by hydrogen peroxide and persulfate assisted TiO2-based photocatalysis.

Organochlorine pesticides (OCPs) have been used extensively as insecticides and herbicides. This study investigates the occurrence of lindane in surface water from the Peshawar valley (i.e., Peshawar, Charsadda, Nowshera, Mardan and Swabi districts of Khyber Pakhtunkhwa, Pakistan). Out of 75 samples tested (i.e., 15 samples from each district), 13 samples (including 2 from Peshawar, 3 from Charsadda, 4 from Nowshera, 1 from Mardan, and 3 from Swabi) are found to be contaminated with lindane. Overall, the detection frequency is 17.3%. The maximum concentration of lindane is detected in a water sample from Nowshera and found to be 2.60 µg L-1. Furthermore, the degradation of lindane in the water sample from Nowshera, containing the maximum concentration, is investigated by simulated solar-light/TiO2 (solar/TiO2), solar/H2O2/TiO2 and solar/persulfate/TiO2 photocatalysis. The degradation of lindane by solar/TiO2 photocatalysis is 25.77% after 10 h of irradiation. The efficiency of the solar/TiO2 process is significantly increased in the presence of 500 µM H2O2 and 500 µM persulfate (PS) (separately), represented by 93.85 and 100.00% lindane removal, respectively. The degradation efficiency of lindane is lower in natural water samples as compared to Milli-Q water, attributed to water matrix effect. Moreover, the identification of degradation products (DPs) shows that lindane follows similar degradation pathways in natural water samples as the one in Milli-Q water. The results show that the occurrence of lindane in surface waters of Peshawar valley is a matter of great concern for human beings and the environment. Interestingly, H2O2 and PS assisted solar/TiO2 photocatalysis is an effective method for the removal of lindane from natural water.

Catalytic degradation of carbamazepine by surface-modified zerovalent copper via the activation of peroxymonosulphate: mechanism, degradation pathways and ecotoxicity.

In this research work, surface-modified nano zerovalent copper (nZVC) was prepared using a simple borohydride reduction method. The spectroscopic and crystallographic results revealed the successful synthesis of surface-modified nano zerovalent copper (nZVC) using solvents such as ethanol (ETOH), ethylene glycol (EG) and tween80 (T80). The as-synthesized material was fully characterized for morphological surface and crystal structural properties. The results indicated that EG provides an excellent synthesis environment to nZVC compared to ETOH and T80 in terms of good dispersion, high surface area and excellent catalytic properties. The catalytic efficiency of nZVC/EG was investigated alone and with peroxymonosulphate (PMS) in the absence of light. The degradation results demonstrated that the involvement of PMS synergistically boosted the catalytic efficiency of synthesized nZVC/EG material. Furthermore, the degradation products (DPs) of CBZ were determined by GC-MS and subsequently, the degradation pathways were proposed. The ecotoxicity analysis of the DPs was also explored. The proposed (nZVC/EG/PMS) system is economical and efficient and thus could be applied for the degradation of CBZ from an aquatic system after altering the degradation pathways in such a way that results in harmless products.

Chromium removal from aqueous solution using bimetallic Bi0/Cu0-based nanocomposite biochar.

Chromium (Cr), due to its greater contamination in aquifers and distinct eco-toxic impacts, is of greater environmental concern. This study aimed to synthesize nanocomposites of almond shells biochar (BC) with zerovalent bismuth and/or copper (Bi0/BC, Cu0/BC, and Bi0-Cu0/BC) for the removal of Cr from aqueous solution. The synthesized nanocomposites were investigated using various characterization techniques such as XRD, FTIR spectroscopy, SEM, and EDX. The Cr removal potential by the nanocomposites was explored under different Cr concentrations (25-100 mg/L), adsorbent doses (0.5-2.0 g/L), solution pH (2-8), and contact time (10-160 min). The above-mentioned advanced techniques verified successful formation of Bi0/Cu0 and their composite with BC. The synthesized nanocomposites were highly effective in the removal of Cr. The Bi0-Cu0/BC nano-biocomposites showed higher Cr removal efficiency (92%) compared to Cu0/BC (85%), Bi0/BC (76%), and BC (67%). The prepared nanocomposites led to effective Cr removal at lower Cr concentrations (25 mg/L) and acidic pH (4.0). The Cr solubility changes with pH, resulting in different degrees of Cr removal by Bi0-Cu0/BC, with Cr(VI) being more soluble and easier to adsorb at low pH levels and Cr(III) being less soluble and more difficult to adsorb at high pH levels. The experimental Cr adsorption well fitted with the Freundlich adsorption isotherm model (R2 > 0.99) and pseudo-second-order kinetic model. Among the prepared nanocomposites, the Bi0-Cu0/BC showed greater stability and reusability. It was established that the as-synthesized Bi0-Cu0/BC nano-biocomposite showed excellent adsorption potential for practical Cr removal from contaminated water.

Comparison of As removal efficiency and health risks from aqueous solution using as-synthesized Fe0 and Cu0: modelling, kinetics and reusability.

Batch scale removal of arsenic (As) from aqueous media was explored using nano-zero valent iron (Fe0) and copper (Cu0) particles. The synthesized particles were characterized using a Brunauer-Emmett-Teller (BET) surface area analyzer, a scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FTIR). The BET result showed that the surface area (31.5 m2/g) and pore volume (0.0415 cm3/g) of synthesized Fe0 were higher than the surface area (17.56 m2/g) and pore volume (0.0287 cm3/g) of Cu0. The SEM results showed that the morphology of the Fe0 and Cu0 was flowery microspheres and highly agglomerated with thin flakes. The FTIR spectra for Fe0 showed broad and intense peaks as compared to Cu0. The effects of the adsorbent dose (1-4 g/L), initial concentration of As (2 mg/L to 10 mg/L) and solution pH (2-12) were evaluated on the removal of As. Results revealed that effective removal of As was obtained at pH 4 with Fe0 (94.95%) and Cu0 (74.86%). When the dosage increased from 1 to 4 g L-1, the As removal increased from 70.59 to 93.02% with Fe0 and from 67 to 70.59% with Cu0. However, increasing the initial As concentration decreased the As removal significantly. Health risk indices, including estimated daily intake (EDI), hazard quotient (HQ), and cancer risk (CR) were employed and a significant decline (up to 99%) in risk indices was observed in As-treated water using Fe0/Cu0. Among the adsorption isotherm models, the values of R2 showed that isothermal As adsorption by Fe0 and Cu0 was well explained by the Freundlich adsorption isotherm model (R2 > 0.98) while the kinetic experimental data was well-fitted with the Pseudo second order model. The Fe0 showed excellent stability and reusability over five sorption cycles, and it was concluded that, compared to the Cu0, the Fe0 could be a promising technology for remediating As-contaminated groundwater.

Development of zerovalent iron and titania (Fe0/TiO2) composite for oxidative degradation of dichlorophene in aqueous solution: synergistic role of peroxymonosulfate (HSO5-).

Binary composite of zerovalent iron and titanium dioxide (Fe0/TiO2) was synthesized for the catalytic removal of dichlorophene (DCP) in the presence of peroxymonosulfate (PMS). The as-prepared composite (Fe0/TiO2) exhibits synergistic effect and enhanced properties like improved catalytic activity of catalyst and greater magnetic property for facile recycling of catalyst. The results showed that without addition of PMS at reaction time of 50 min, the percent degradation of DCP by TiO2, Fe0, and Fe0/TiO2 was just 5%, 11%, and 12%, respectively. However, with the addition of 0.8 mM PMS, at 10 min of reaction time, the catalytic degradation performance of Fe0, TiO2, and Fe0/TiO2 was significantly improved to 82%, 18%, and 88%, respectively. The as-prepared catalyst was fully characterized to evaluate its structure, chemical states, and morphology. Scanning electron microscopy results showed that in composite TiO2 causes dispersion of agglomerated iron particles which enhances porosity and surface area of the composites and X-ray diffraction (XRD), energy dispersive X-ray (EDX), and Fourier-transform infrared (FTIR) results revealed successful incorporation of Fe0, and oxides of Fe and TiO2 in the composite. The adsorption-desorption analysis verifies that the surface area of Fe0/TiO2 is significantly larger than bare Fe0 and TiO2. Moreover, the surface area, particle size, and crystal size of Fe0/TiO2 was surface area = 85 m2 g-1, particle size = 0.35 µm, and crystal size = 0.16 nm as compared to TiO2 alone (surface area = 22 m2 g-1, particle size = 4.25 µm, and crystal size = 25.4 nm) and Fe0 alone (surface area = 65 m2 g-1, particle size = 0.9 µm, and crystal size = 7.87 nm). The as-synthesized material showed excellent degradation performance in synthesized wastewater as well. The degradation products and their toxicities were evaluated and the resulted degradation mechanism was proposed accordingly. The toxicity values decreased in order of DP1 > DP5 > DP2 > DP3 > DP4 and the LC50 values toward fish for 96-h duration decreased from 0.531 to 67.2. This suggests that the proposed technology is an excellent option for the treatment of antibiotic containing wastewater.

Highly Efficient Visible Light Active Doped ZnO Photocatalysts for the Treatment of Wastewater Contaminated with Dyes and Pathogens of Emerging Concern.

Water is obligatory for sustaining life on Earth. About 71% of the Earth's surface is covered in water. However, only one percent of the total water is drinkable. The presence of contaminants in wastewater, surface water, groundwater, and drinking water is a serious threat to human and environmental health. Their toxic effects and resistance towards conventional water treatment methods have compelled the scientific community to search for an environmentally friendly method that could efficiently degrade toxic contaminants. In this regard, visible light active photocatalysts have proved to be efficient in eliminating a wide variety of water toxins. A plethora of research activities have been carried out and significant amounts of funds are spent on the monitoring and removal of water contaminants, but relatively little attention has been paid to the degradation of persistent water pollutants. In this regard, nanoparticles of doped ZnO are preferred options owing to their low recombination rate and excellent photocatalytic and antimicrobial activity under irradiation of solar light. The current article presents the roles of these nanomaterials for wastewater treatment from pollutants of emerging concern.

Preparation of H3PO4 modified Sidr biochar for the enhanced removal of ciprofloxacin from water.

In this study, biochar was prepared from Sidr plant leaves and used for the treatment of ciprofloxacin (CIP)-contaminated water. CIP is important class of emerging water pollutants from pharmaceutical industries. The biochar showed 65% adsorption efficiency and 43.48 mg/g adsorption capacity of CIP. Adsorption efficiency as well as adsorption capacity were improved to 91% and 62.50 mg/g, respectively, by phosphoric acid (H3PO4) modified biochar. Removal of CIP by the prepared biochar was due to different surface functional groups of CIP and biochar as revealed from the study of different characterization analyses. The presence of PO43- group in modified biochar led to maximum binding of CIP. Also, the modified biochar showed higher reusability potential and less leaching of ions when compared to the raw biochar. Removal of CIP was affected by concentrations of CIP, the amount of biochar and different pH's; the maximum removal of CIP was achieved at pH 4. The Freundlich and pseudo-first-order models best fitted the removal of CIP by modified biochar. Advanced characterization techniques were applied to investigate surface and physiological characteristics of the biochar and modified biochar. The modification showed high impact on the performance and stability of biochar. The study showed significant impacts of modification on the potential of the biochar for treatment of CIP-contaminated water.

Enhanced solar light photocatalytic performance of Fe-ZnO in the presence of H2O2, S2O82-, and HSO5- for degradation of chlorpyrifos from agricultural wastes: Toxicities investigation.

This study reported Fe doped zinc oxide (Fe-ZnO) synthesis to degrade chlorpyrifos (CPY), a highly toxic organophosphate pesticide and important sources of agricultural wastes. Fourier transform infrared, X-ray diffraction, scanning electron microscope, and energy-dispersive X-ray spectroscopic analyses showed successful formation of the Fe-ZnO with highly crystalline and amorphous nature. Water collected from agricultural wastes were treated with Fe-ZnO and the results showed 67% degradation of CPY by Fe-ZnO versus 39% by ZnO at 140 min treatment time. Detail mechanism involving reactive oxygen species production from solar light activated Fe-ZnO and their role in degradation of CPY was assessed. Use of H2O2, peroxydisulfate (S2O82-) and peroxymonosulfate (HSO5-) with Fe-ZnO under solar irradiation promoted removal of CPY. The peroxides yielded hydroxyl (OH) and sulfate radical () under solar irradiation mediated by Fe-ZnO. Effects of several parameters including concentration of pollutant and oxidants, pH, co-existing ions, and presence of natural organic matter on CPY degradation were studied. Among peroxides, HSO5- revealed to provide better performance. The prepared Fe-ZnO showed high reusability and greater mineralization of CPY. The GC-MS analysis showed degradation of CPY resulted into several transformation products (TPs). Toxicity analysis of CPY as well as its TPs was performed and the formation of non-toxic acetate imply greater capability of the treatment technology.

A novel route for catalytic activation of peroxymonosulfate by oxygen vacancies improved bismuth-doped titania for the removal of recalcitrant organic contaminant.

In this work, bismuth-doped titania (BixTiO2) with improved oxygen vacancies was synthesized by sol-gel protocol as a novel peroxymonosulfate (PMS, HSO5-) activator. HSO5- and adsorbed oxygen molecules could efficiently be transformed into their respective radicals through defect ionization to attain charge balance after their trapping on oxygen vacancies of the catalyst. XRD study of BixTiO2 with 5 wt% Bi (5BiT) revealed anatase, crystalline nature, and successful doping of Bi into TiO2 crystal lattice. The particle size obtained from BET data and SEM observations was in good agreement. PL spectra showed the formation rates of •OH by 3BiT, 7BiT, 5BiTC, and 5BiT as 0.720, 1.200, 1.489, and 2.153 µmol/h, respectively. 5BiT catalyst with high surface area (216.87 m2 g-1) and high porosity (29.81%) was observed the excellent HSO5- activator. The catalytic performance of 0BiT, 3BiT, 5BiT, and 7BiT when coupled with 2 mM HSO5- for recalcitrant flumequine (FLU) removal under dark was 10, 27, 55, and 37%, respectively. Only 5.4% decrease in catalytic efficiency was observed at the end of seventh cyclic run. Radical scavenging studies indicate that SO4•- is the dominant species that caused 62.0% degradation. Moreover, strong interaction between Bi and TiO2 through Bi-O-Ti bonds prevents Bi leaching (0.081 mg L-1) as shown by AAS. The kinetics, degradation pathways, ecotoxicity, and catalytic mechanism for recalcitrant FLU were also elucidated. Cost-efficient, environment-friendly, and high mineralization recommends this design strategy; BixTiO2/HSO5- system is a promising advanced oxidation process for the aquatic environment remediation.

Nano-zerovalent manganese/biochar composite for the adsorptive and oxidative removal of Congo-red dye from aqueous solutions.

Congo-red (CR), a precursor of textile products and a contaminant of great concern, has contaminated aquatic environments. Here, we explored the synthesis of mesoporous nano-zerovalent manganese (nZVMn) and Phoenix dactylifera leaves biochar (PBC) composite for the removal of CR from water. The nZVMn/PBC adsorbed 117.647 mg/g of CR versus 25.316 mg/g by PBC at [CR]0 = 20 mg/L and [PBC]0 = [nZVMn/PBC]0 = 500 mg/L. Variation of [nZVMn/PBC]0, [CR]0 and pH influenced the adsorption of CR. Freundlich adsorption isotherm and pseudo-first-order kinetic models best fitted CR adsorption. The H2O2 coupling with nZVMn/PBC promoted removal of CR possibly due to the formation of hydroxyl radical (●OH) and caused 95 % removal of CR versus 77 % by nZVMn/PBC alone. The ●OH scavengers inhibited the removal of CR. The nZVMn/PBC showed a good reusability and efficient removal of CR up to the seventh cycle of treatment. Results reveal that nZVMn improved performance, thermal stability and reusability of biochar. Degradation products from ●OH-mediated degradation of CR were studied by ultraperformance liquid chromatography with mass spectrometric detector to establish degradation pathways. The ion-chromatographic analysis showed the formation of non-toxic inorganic acetate product, which suggests high potential of the newly fabricated adsorbent in the removal of CR.

Bismuth-Doped Nano Zerovalent Iron: A Novel Catalyst for Chloramphenicol Degradation and Hydrogen Production.

In this study, we showed that doping bismuth (Bi) at the surface of Fe0 (Bi/Fe0, bimetallic iron system)-synthesized by a simple borohydride reduction method-can considerably accelerate the reductive degradation of chloramphenicol (CHP). At a reaction time of 12 min, 62, 68, 74, 95, and 82% degradation of CHP was achieved with Fe0, Bi/Fe0-1 [1% (w/w) of Bi], Bi/Fe0-3 [3% (w/w) of Bi], Bi/Fe0-5 [5% (w/w) of Bi], and Bi/Fe0-8 [8% (w/w) of Bi], respectively. Further improvements in the degradation efficiency of CHP were observed by combining the peroxymonosulfate (HSO5 -) with Bi/Fe0-5 (i.e., 81% by Bi/Fe0-5 and 98% by the Bi/Fe0-5/HSO5 - system at 8 min of treatment). Interestingly, both Fe0 and Bi/Fe0-5 showed effective H2 production under dark conditions that reached 544 and 712 µM by Fe0 and Bi/Fe0-5, respectively, in 70 mL of aqueous solution containing 0.07 g (i.e., at 1 g L-1 concentration) of the catalyst at ambient temperature.

Hydrogeochemical investigation of arsenic in drinking water of schools and age dependent risk assessment in Vehari District, Punjab Pakistan: a multivariate analysis.

Globally, a large number of school-aged children is suffering from water-borne diseases, particularly in low-income countries. Arsenic (As) is a hazardous and potentially carcinogenic metal(loid) in drinking water. Nowadays, alarming levels of As have been reported in the groundwater of Vehari District, Punjab Pakistan. In this study, drinking water supplies for high and higher secondary schools were examined in Vehari District. A total of 164 water samples were collected from schools and subjected to heavy metal(loid) analysis (As) and basic water physicochemical parameters. The results were analyzed with respect to sampling area, school type, school education level, sources of sample collection, and the depth of the source. The results revealed that As concentration of water samples in boys' and girls' schools was 12.8 µg/L and 9.2 µg/L, respectively. However, when the As concentration in drinking water was evaluated at the school education level, a notable higher concentration of As was observed in the higher secondary schools than the high schools with an average of 19.5 and 9.7 µg/L, respectively. The risk assessment indices were calculated based on education level and different age groups of the children (primary, elementary, high, and higher secondary). High carcinogenic (cancer risk = 0.001) and non-carcinogenic (hazard quotient = 2.0) risks were noted for the children in higher secondary school. The current findings anticipated that the drinking water of schools in Vehari District did not meet the requirement of the World Health Organization (WHO) drinking water quality guidelines. Safe drinking water is crucial for the development and growth of children. Therefore, it is important for educational authorities to take steps for provision of As free safe drinking water to students and local inhabitants.

Synergistic effects of bismuth coupling on the reactivity and reusability of zerovalent iron nanoparticles for the removal of cadmium from aqueous solution.

Removal of cadmium (Cd2+), a highly toxic heavy metal, from aqueous solutions was investigated using nano zerovalent iron (Fe0). Cadmium was efficiently removed by Fe0, although reactivity and reusability of Fe0 was significantly promoted by coupling with bismuth (Bi). At a reaction time of 20 min, 85% and 96% Cd2+ was removed by Fe0 and Bi/Fe0, respectively, at first cycle using [Cd2+]0 = 10 mg/L and [Fe0]0 = [Bi/Fe0]0 = 1.0 g/L. However, Cd2+ removal efficiency was reduced to 12% and 80% at sixth cycle by Fe0 and Bi/Fe0, respectively. The X-Ray diffraction and energy dispersive X-Ray spectroscopy analysis proved successful formation of Fe0 by the chemical reduction method and also confirmed coupling of Bi with Fe0 to form bimetallic Bi/Fe0. The oxidation of Fe0 and Bi/Fe0 yielded electron that played significant role in the conversion of toxic Cd2+ into non-toxic Cd0. The reactivity of electron with Cd2+ was calculated to be 4.3 × 109 M-1 s-1. The pH of solution showed pronounced effects on the reactivity of both Fe0 and Bi/Fe0. Removal of Cd2+ by both Fe0 and Bi/Fe0 followed pseudo-first-order kinetic model. The conversion of Cd2+ into non-toxic Cd0 proved Fe0 and Bi/Fe0 to be highly efficient and rewarding in detoxification of Cd2+ and other toxic metals in aqueous environments.

Detailed kinetics study of arsenate adsorption by a sequentially precipitated binary oxide of iron and silicon.

This paper comprises a comprehensive kinetic study for the adsorptive removal of As (V) from aqueous medium by mixed oxide (MO) of iron and silicon. The multi-linearity of the intraparticle diffusion model pointed towards the likelihood of both the pore and film diffusion. The Boyd model validated film diffusion to be the principal mechanism responsible for controlling the rate of the arsenate adsorption on MO. The negative entropy of activation (ΔS#) suggested the adsorption mechanism to be associative in nature. The non-negative values of ΔG# suggested the presence of an energy barrier to be surmounted for the reaction to occur.

A multivariate analysis of physiological and antioxidant responses and health hazards of wheat under cadmium and lead stress.

Soil contamination with heavy metals is a global issue confronting the environmental pollution and human/animal health. Much work has been done on physiological and antioxidant responses of wheat in hydroponic experiments and health risks from individual heavy metal contamination to human, but limited information is available on their combined application in soil. Therefore, this pot study delineates the uptake of lead and cadmium, as well as physiological responses of wheat and associated health risks under different levels of alone and combined Cd and Pb treatments. Metal uptake increased with their increasing applied levels. The highest Cd (4.24, 1.38, and 0.92 mg kg-1) and Pb (763.33, 39.63, and 16.35 mg kg-1) concentrations in root, shoot, and grain, respectively, were observed at highest applied levels (0.4 mM Cd and 10 mM Pb). Furthermore, all the treatments increased lipid peroxidation and activities of superoxide dismutase, catalase, ascorbate peroxidase, and peroxidase, while decreased total chlorophyll contents and membrane stability index. Under combined application of Cd and Pb, the toxicity and detoxification responses of wheat increased compared to alone treatments. Multivariate analysis further confirmed the toxicity and accumulation pattern of metals under alone and combined treatments. Target hazard quotient values of Cd and Pb were < 1 under alone and combined treatments. The health hazard index values of Pb (97.07 and 87.89%) were higher than those of Cd (2.93 and 12.10%) in combined application for human and buffalo, respectively. This study highlights that the multi-metal contamination (Cd and Pb) is detrimental for wheat growth and human/animal health.

Oxidative removal of brilliant green by UV/S2O82‒, UV/HSO5‒ and UV/H2O2 processes in aqueous media: A comparative study.

The removal of brilliant green (BG), a toxic organic and cationic dye, has been examined by UV/S2O82- (PS), UV/HSO5- (PMS) and UV/H2O2 processes. BG showed insignificant direct photolysis at 254 nm (i.e., 8.6% after 30 min). However, enhanced BG degradation was observed in UV/PS, UV/PMS and UV/H2O2 systems as revealed from 63.1, 47.0 and 34.8% BG degradation, respectively, at 30 min of reaction time, using 0.05 mM BG and 1.0 mM oxidant initial concentration. The bimolecular rate constants of OH and SO4- with BG were determined to be 2.35 × 109 and 2.21 × 109 M-1 s-1, respectively. Electrical energy per order (EE/O) values for UV/PS, UV/PMS and UV/H2O2 processes were calculated to be 5.4, 6.8, and 7.8 KWh/m3/order, respectively. The addition of humic acid (HA) and inorganic anions inhibited the degradation of BG by UV/PS in the order of NO2- > HA > HCO3- > Cl-  > NO3- ≈ SO42-. The results of frontier electron densities (FEDs) showed that C-atom holding the three rings (C7), and C-atoms at para positions to N-alkyl groups of the two rings (C4 and C14) are the predominant sites for radical addition. Furthermore, nine degradation products (DPs) of BG were detected experimentally using LC/MS/MS.

Enhanced antimicrobial, anti-oxidant applications of green synthesized AgNPs- an acute chronic toxicity study of phenolic azo dyes & study of materials surface using X-ray photoelectron spectroscopy.

The drug resistant bacteria and textile contaminations of water cause different sever health problem throughout the world. To overcome this issue, new environmental benign materials and methods are needed. Plant metabolites directed synthesis of nanoparticles is considered eco-friendly and easy in synthesis. Therefore, it was explicit for the synthesis of AgNPs. The prepared AgNPs were evaluated for antibacterial, antioxidant, photo-catalytic and electrochemical degradation properties as well as toxicity of degradation products on aquatic life. X-Ray Photoelectron Spectroscopy (XPS) has been used for analyzing the surface chemistry of prepared AgNPs. The particle size determines the interaction of nanoparticles with pathogens. Both Gram positive and negative bacteria (Escherichia coli and Staphylococcus areous) are used to determine the anti-microbial potency of the green synthesized AgNPs. The synthesized silver nanoparticles showed significant anti-bacterial applications against B. subtilus and S. aureus. The anti-oxidant applications of AgNPs also studied on comparison with vitamin C. The toxicity of the phenolic Azo dyes (PDA) has been studied against Fish, Daphnia and Green Algae. The electrode potential was studied in the electrochemical redox reaction of hydroxy phenol in aqueous media. Simple electrolyte was used to determine the current efficiency. For the stability of electrode multi cyclic voltammetry was also studied during redox reaction, which showed stability under the potential 0.4 to 0.2 V.

Effect of organic amendments on cadmium stress to pea: A multivariate comparison of germinating vs young seedlings and younger vs older leaves.

Despite significant recent advancement in research, biogeochemical behavior of heavy metals with respect to their applied form is still topical. Moreover, metal toxicity to plants may vary with their stage of development/maturity. Therefore, this study for the first time evaluated the influence of ethylenediaminetetraacetic acid (EDTA) and citric acid (CA) on cadmium (Cd) accumulation and toxicity to germinating and young pea seedlings as well as in younger and older leaves. The experimental setup of current study consisted of two separate studies. The first study was performed on germinating seedlings grown in a Cd-contaminated sand media. Pea seeds were treated with two levels of Cd (Cd-25 and Cd-100) alone and combined with different levels of EDTA and CA. The second study was carried out in hydroponic solution. The influence of organic amendments on Cd accumulation and toxicity to pea plants was evaluated by determining Cd contents in pea seedlings, H2O2 contents, chlorophyll contents and lipid peroxidation in younger and older leaves. Cadmium stress caused overproduction of H2O2 in roots and leaves of pea seedlings. Cadmium-induced overproduction of H2O2 caused a decrease in the pigment contents and increased lipid peroxidation. Application of EDTA at higher levels (81 and 200µM) increased Cd accumulation by pea plants. However, CA did not affect Cd accumulation by pea. Both EDTA and CA increased Cd-induced H2O2 production and lipid peroxidation. Younger pea leaves showed more sensitivity to Cd stress compared to older leaves. Similarly, Cd toxicity was more pronounced in germinating seedlings than young seedlings. Moreover, Pearson correlation and principal component analysis (PCA) showed very interesting correlations between treatments and stress responses of germination and young seedlings as well as younger and older leaves. Based on multivariate analysis, it is proposed that the Cd toxicity to pea plants greatly vary with its growth stage and the maturity of organs (younger or older leaves).

Biomedical applications of green synthesized Nobel metal nanoparticles.

Synthesis of Nobel metal nanoparticles, play a key role in the field of medicine. Plants contain a substantial number of organic constituents, like phenolic compounds and various types of glycosides that help in synthesis of metal nanoparticles. Synthesis of metal nanoparticles by green method is one of the best and environment friendly methods. The major significance of the green synthesis is lack of toxic by-products produced during metal nanoparticle synthesis. The nanoparticles, synthesized by green method show various significant biological activities. Most of the research articles report the synthesized nanoparticles to be active against gram positive and gram negative bacteria. Some of these bacteria include Escherichia coli, Bacillus subtilis, Klebsiella pneumonia and Pseudomonas fluorescens. The synthesized nanoparticles also show significant antifungal activity against Trichophyton simii, Trichophyton mentagrophytes and Trichophyton rubrum as well as different types of cancer cells such as breast cancer cell line. They also exhibit significant antioxidant activity. The activities of these Nobel metal nano-particles mainly depend on the size and shape. The particles of small size with large surface area show good activity in the field of medicine. The synthesized nanoparticles are also active against leishmanial diseases. This research article explores in detail the green synthesis of the nanoparticles and their uses thereof.

Arsenic tolerance and phytoremediation potential of Conocarpus erectus L. and Populus deltoides L.

The present study was conducted to explore arsenic (As) tolerance and phytostabilization potential of the two tree species, buttonwood (Conocarpus erectus) and eastern cottonwood (Populus deltoides). Both plant species were grown in pots and were exposed to various soil As levels (control, 5, 10, 15, and 20 mg kg-1). The plants were harvested after 9 months for the evaluation of growth parameters as well as root and shoot As concentrations. With increasing soil As levels, plant height stress tolerance index (PHSTI) was significantly decreased in both tree species, whereas root length stress tolerance index (RLSTI) and dry matter stress tolerance index (DMSTI) were not affected. Root and shoot As concentrations significantly increased in both tree species with increasing soil As levels. Translocation factor and bioconcentration factor were less than 1.0 for both plant species. This study revealed that both tree species are non-hyperaccumulators of As, but they could be used for phytostabilization of As-contaminated soils.