Evaluation of Plant-Based Silver Nanoparticles for Antioxidant Activity and Promising Wound-Healing Applications.

The current research focuses on the green synthesis of silver nanoparticles (AgNPs) using a polar extract of taro corms and the evaluation of its antioxidant properties and wound-healing applications. Taro corm extract (100 mL) was treated with a 5 mM AgNO3 solution (100 mL) at room temperature for the formation of AgNPs, and a color change was observed. The surface plasmon resonance (SPR) peaks in their UV-visible spectra appeared at a range of 438-445 nm. Fourier transform infrared, scanning electron microscopy, energy-dispersive X-ray, dynamic light scattering, and X-ray diffraction were used for the characterization of the taro corms extract-mediated AgNPs (TCE-AgNPs). The synthesized AgNPs were crystalline and spherical, with an average size of 244.9-272.2 nm with a polydispersity index of 0.530 and zeta potential of -18.8 mV, respectively. The antibacterial potential of TCE-AgNPs was tested, and the inhibition zones detected against Cronobacter sakazakii, Pseudomonas aeruginosa, Listeria monocytogenes, and Enterococcus faecalis were 28, 26, 18, and 13 mm, respectively. Furthermore, the antioxidant activity of TCE-AgNPs showed significant radical-scavenging activity compared to the standard used. Collagen content data collected from regenerated tissue and higher collagen content indicated rapid wound healing compared to others, which was seen in a group treated with TCE-AgNP film bandages.

Effect of hydrophilic polymers on the solubility and dissolution enhancement of rivaroxaban/beta-cyclodextrin inclusion complexes.

BCS class II drugs exhibit low aqueous solubility and high permeability. Such drugs often have an incomplete or erratic absorption profile. This study aimed to predict the effects of ß-cyclodextrin (ßCD) and different hydrophilic polymers (poloxamer 188 (PXM-188), polyvinyl pyrrolidone (PVP) and soluplus (SOLO)) on the saturated solubility and dissolution profile of hydrophobic model drug rivaroxaban (RIV). Binary inclusion complex with ßCD were prepared by kneading and solvent evaporation method, at drug to cyclodextrin weight molar ratios of 1:1, 1:2, and 1:4. Saturated solubility of the hydrophobic model moiety was evaluated with ßCD to explore the increment in saturated solubility. Dissolution test was carried out to assess the drug release from the produced binary inclusion complex in the aqueous medium. Solid state analysis was performed using Fourier transform infrared spectroscopy (FTIR), Differential scanning calorimetry (DSC), X-ray diffraction (XRD), and Scanning electron microscopy (SEM) techniques. When compared to pure drug, the binary complex (Drug: ßCD at molar ratio of 1:2 w/w) demonstrated the best performance in terms of enhanced solubility and drug release. Furthermore, ternary inclusion complex was prepared with hydrophilic polymers SOLO, PVP K-30 and PXM-188 at 0.5%,1%,2.5%,5% and 10% w/w to optimized binary formulation RIV:ßCD (1:2) prepared by kneading (KN) and solvent evaporation (S.E) method. The findings demonstrated that among ternary formulations (1:2 Drug: ßCD: SOLO 10% S.E) manifested greatest improvement in saturated solubility and dissolution rate. Results of solubility enhancement and improvement in dissolution profile of model drug by ternary inclusion complexation were also supported by FTIR, DSC, XRD, and SEM analysis. So, it can be concluded that the ternary inclusion systems were more effective compared to the binary combinations in improving solubility as well as dissolution of hydrophobic model drug rivaroxaban.

Formulation and Characterization of Curcumin Niosomes: Antioxidant and Cytotoxicity Studies.

Curcumin's applications in the treatment of conditions including osteoarthritis, dementia, malignancies of the pancreas, and malignancies of the intestines have drawn increasing attention. It has several wonderful qualities, including being an anti-inflammatory agent, an anti-mutagenic agent, and an antioxidant, and has substantially reduced inherent cytotoxicity outcomes. Although curcumin possesses multiple known curative properties, due to its limited bioavailability, it is necessary to develop efficient strategies to overcome these hurdles. To establish an effective administration method, various niosomal formulations were optimized using the Box-Behnken design and assessed in the current investigation. To examine the curcumin niosomes, zeta sizer, zeta potential, entrapment efficiency, SEM, antioxidant potential, cytotoxicity, and release studies were performed. The optimized curcumin niosomes exhibited an average particle size of 169.4 nm, a low PDI of 0.189, and high entrapment efficiency of 85.4%. The release profile showed 79.39% curcumin after 24 h and had significantly higher antioxidant potential as compared with that of free curcumin. The cytotoxicity results of curcumin niosomes presented increased mortality in human ovarian cancer A2780.

Development and Pharmacokinetic Evaluation of Novasomes for the Trans-nasal Delivery of Fluvoxamine Using Arachidonic Acid-Carboxymethyl Chitosan Conjugate.

Depression is the major mental illness which causes along with loss of interest in daily life, a feeling of hopelessness, appetite or weight changes, anger and irritability. Due to the hepatic first-pass metabolism, the absolute bioavailability of fluvoxamine (FVM) after oral administration is about 50%. By avoiding the pre-systemic metabolism, nasal delivery would boost bioavailability of FVM. Additionally, the absorption is anticipated to occur more quickly than it would via the oral route because of the existence of microvilli and high vasculature. A nonionic surfactant, cholesterol and an arachidonic acid-carboxymethyl chitosan (AA-CMCS) conjugate were used to develop FVM-loaded novasomes. To investigate the effects of surfactant concentration, AA-CMCS conjugate concentration and stirring speed on the novasomes' characteristics, a Box-Behnken design was used. The dependent variables chosen were zeta potential, polydispersity index and particle size. The AA-CMCS conjugate was confirmed by 1H-NMR and FTIR. Using Design Expert software (version 7; Stat-Ease Inc., Minneapolis, MN, USA), novasomes were further optimized. The chosen optimal formulation (NAC8) was made up of AA-CMCS conjugate, Span 60 and cholesterol. Particle size, zeta potential and PDI values for NAC8 formulation were 101 nm, -35 mV and 0.263, respectively. The NAC8 formulation's DSC and TGA analysis demonstrated that the medication had been uniformly and amorphously distributed throughout the novasomes. The NAC8 formulation showed 99% and 90% FVM release and permeation, respectively, and the novasome adherence time was 24 h. An improved antidepressant effect along with five-fold increase in bioavailability of FVM was observed after trans-nasal administration of NAC8 formulation compared to the reference commercially available Flumin® tablets. FVM-loaded novasomes administered via the nasal route may therefore constitute an advancement in the management of depression.

The Role of Pro-Inflammatory Mediator Interleukin-32 in Osteoclast Differentiation.

The recently explained cytokine, which is produced after the stimulation of interferon (IFN)-c, interleukin (IL)-2, and IL-18 is IL-32, has pro-inflammatory IFN-c, IL-2 and IL-18 are IL-32 mediator's properties that are generally entailed in many diseases, including infections, cancer, and chronic inflammation. After the initial statement in 2005, it promoted the osteoclast precursor's differentiation into TRAcP plus VNR plus multinucleated cells that express explicit osteoclast indicators. Furthermore, the loss of bone resorption might be accredited because of the collapse of the multinucleated cells, which are produced of the reaction to IL-32 to direct factoring that is ultimately essential for attaching the cells for bone resorption. Thus, in conclusion, IL-32, the pro-inflammatory mediator, has an important and indirect role in regulating osteoclast differentiation. In bone disorder's pathophysiology, critical role of IL-32 needs more scientific evidence to develop a rational treatment protocol. IL-32 can become a potent mediator of active osteoclast generation in the presence of receptor activator of NF-κB ligand (RANKL). This novel cytokine can introduce more favorable conditions for osteoclastogenesis in the rheumatic arthritis by increasing the RANKL and osteoprotegerin ratio in fibroblast-like synoviocytes.

Meloxicam loaded hydroxypropyl methylcellulose (HPMC) microparticulate: Fabrication, characterization and in vivo pharmacokinetic assessment.

Meloxicam (MEL) is an oxicam derivative with low water solubility that is useful in the treatment of colorectal cancer (CRC) as a COX-2 inhibitor. MEL-loaded HPMC micro particles were fabricated using an oil-in-oil (o/o) emulsion solvent evaporation (ESE) method. FTIR, XRD, particle size analysis, DSC, SEM and in vitro dissolution investigation were utilized to evaluate the produced micro particles physiochemically. Finally, rabbits were used as animal models in an in vivo pharmacokinetic study to assess the MEL concentration in the plasma of rabbits. Pure MEL, F1 and F2 were given to rabbits by a single dose for in vivo pharmacokinetic investigations. The XRD and DSC results confirmed the transformation of MEL from its crystalline nature to the amorphous state in micro particles. The formulations F1 and F2 particle sizes were determined 92.43µm and 163.26µm, respectively. The prepared micro particles had a smooth, non-porous and spherical surface. In comparison to the pure drug (22.4%), the F1 and F2 cumulative drug release (%) was 86.19% and 79.57%, respectively. Pure MEL, F1 and F2 have estimated Cmax values of 7.21, 25.41 and 22.38µg/mL, respectively. MEL had a half-life of 19.98 hours, which rose to 22.19 hours and 24.75 hours for F1 and F2, respectively. MEL, F1 and F2 had AUC0-α values of 116.034, 445.95 and 462.72µg/mL*h, respectively. Considering these aspects, MEL-loaded HPMC micro particles may have the potential to better the delivery and control the release of drug that is not easily dissolved in water which could lead to improved therapeutic efficacy and limited side effects.

Evaluation of anti-inflammatory and analgesic effects of Hertia intermedia (Boiss.) Kuntze extract.

Hertia intermedia is a traditional medicinal plant of Balochistan, used for pain management and stomach problems. Current research work was intended to evaluate the anti-inflammatory and analgesic activities of crude ethanolic extract of H. intermedia. Anti-inflammatory activity was determined by the carrageenan-induced and histamine-induce Rat paw edema in rats, analgesic activity was determined by acetic acid-Induced writhing test, formalin-induced hind paw licking in mice and Tail immersion test. H. intermedia crude ethanolic extract showed significant (p<0.05) effect in both carrageenan and histamine-induced rat paw edema at both 250 and 500 mg/kg oral doses. There were significant analgesic activities in comparison with standard drug and control (p<0.05). It is concluded that H. intermedia crude ethanolic extract possesses significant anti-inflammatory and analgesic effects. However further studies may be carried out to isolate the phytochemicals responsible for anti-inflammatory and analgesic activities.

Development of Optimized Sumatriptan-Prochlorperazine Combined Orodispersible Films Without Disintegrant: in vitro, ex vivo and in vivo Characterization.

Sumatriptan succinate and prochlorperazine maleate are a clinically proven combination for treating migraine and associated nausea and vomiting. Classical oral dosage forms are not frequently workable in migraine because of the associated nausea/vomiting, and no effective fixed dose combination is available. Thus, the aim of the study was to optimize a combined sumatriptan-prochlorperazine orodispersible film for rapid release of drugs. Orodispersible films were prepared by solvent casting method using varied amounts of polyvinyl alcohol and glycerol as film former and plasticizer, respectively, along with fixed levels of other ingredients employing central composite design. The optimum film (VF) demonstrated disintegration and total dispersion times as 21 s and 2.3 min, respectively. Tensile strength and Young's modulus were 8.86 ± 0.37 MPa and 24.15 ± 0.07 MPa, respectively. The in vitro T80% of both drugs from the ODF was achieved within 4 min. The film was palatable and disintegrated in 2 min in buccal cavity of human volunteers. Permeation study through goat mucosa demonstrated 100% permeation of both drugs within 15 min. X-Ray diffraction and differential scanning calorimetry supported drugs being amorphous and Fourier transform infrared demonstrated drug-excipient compatibility in optimized film. A judicious combination of sumatriptan succinate and prochlorperazine maleate could be prepared in orodispersible films for the possible relief of migraine.

Simultaneous quantification of sumatriptan succinate and prochlorperazine maleate in orodispersible films using two validated UV-spectroscopic methods.

The study aimed at simultaneous quantification of sumatriptan succinate (SUM) and prochlorperazine maleate (PCP) in an orodispersible film using two validated spectroscopic methods viz. simultaneous equation (Method I) and the Q-absorption ratio (Method II). The Method I involved measurement of absorbances at λmax of both drugs while in Method II, absorbances were measured at isosbestic wavelength and λmax of one of the two components. Method validation were accomplished as per the ICH guidelines. A 1:1 mixture of the drugs and an orodispersible film (ODF) containing these drugs were assayed by both methods. The absorbance data of SUM and PCP in both methods were linear at respective wavelengths with correlation coefficient values >0.995. Both methods were precise as % RSD in repeatability, interday and intraday precision was less than 2. The estimation of SUM and PCP from the film dosage form by method I was104.74% and 98.34% and by method II was 103.45% and 98.85%, respectively, with a standard deviation <2. The study concluded that both the methods were simple, reliable and robust and can be applied successfully for the simultaneous quantification of SUM and PCP in mixture and orodispersible film dosage form.

Solubility and Dissolution Enhancement of Dexibuprofen with Hydroxypropylbetacyclodextrin (HPßCD) and Poloxamers (188/407) Inclusion Complexes: Preparation and In Vitro Characterization.

The objective of this study was to improve the dissolution and solubility of dexibuprofen (DEX) using hydroxypropyl beta cyclodextrin (HPßCD) inclusion complexes and also to evaluate the effect of presence of hydrophilic polymers on solubilization efficiency of HPßCD. Three different methods (physical trituration, kneading and solvent evaporation) were used to prepare binary inclusion complexes at various drug-to-cyclodextrin weight ratios. An increase in solubility and drug release was observed with the kneading (KN) method at a DEX/HPßCD (1:4) weight ratio. The addition of hydrophilic polymers poloxamer-188 (PXM-188) and poloxamer-407 (PXM-407) at 2.5, 5.0, 10.0 and 20% w/w enhanced the complexation efficiency and solubility of DEX/HPßCD significantly. Fourier-transform infrared (FTIR) analysis revealed that DEX was successfully incorporated into the cyclodextrin cavity. Differential scanning calorimetry (DSC) and X-ray diffractometry (XRD) revealed less crystallinity of the drug and its entrapment in the cyclodextrin molecular cage. The addition of PXM-188 or PXM-407 reduced the strength of the DEX endothermic peak. With the addition of hydrophilic polymers, sharp and intense peaks of DEX disappeared. Finally, it was concluded that PXM-188 at a weight ratio of 10.0% w/w was the best candidate for improving solubility, stability and release rate of DEX.

Prediction of CYP-mediated silybin A-losartan pharmacokinetic interactions using physiological based pharmacokinetic modeling.

The concomitant use of herbal products and synthetic drugs necessitates the assessment of their interaction potentials. The herbal hepatoprotective medicine, silybin A inhibits cytochrome P450 (CYP) 2C9 and 3A4 enzymes, thus, may interact with the drugs that are substrates of CYP2C9 and 3A4, such as losartan. The three most prominent genotypes, expressed by CYP2C9 are the CYP2C9*1/*1, CYP2C9*1/*2 and CYP2C9*1/*3. This study aimed to assess silybin A-losartan interaction in different CYP2C9 genotypes using physiological-based pharmacokinetic (PBPK) model approach. The individual PBPK models for silybin A and losartan were developed using PK-Sim®. Losartan pharmacokinetics was predicted with or without co-administration of silybin A in individuals of different CYP2C9 genotypes to find herbal-drug interaction. The predicted drug plasma curves and pharmacokinetic parameters were optimized using parameter identification tool and were compared with reported pharmacokinetic parameters from the published clinical studies for model validation. The silybin-losartan interactions were predicted by change in area under the curve (AUC) and peak systemic concentration (Cmax). The co-treatment of silybin A, 420 mg/24 h (140 mg/8 h) with losartan 50 mg/24 h, exhibited a genotype-dependent change in the losartan's AUC and Cmax. In CYP 2C9*1/*1 genotype, AUC and Cmax of losartan were increased 1.16 and 1.37 folds, respectively falling in a range stipulated for negligible interaction. Increase in AUC and Cmax by 0.873 and 0.294 folds, respectively in CYP2C9*1/*3 after co-administration of silybin A exhibited a minor interaction with losartan. However, in individuals with CYP2C9*1/*2 genotype, the losartan's AUC and Cmax were decreased by 0.01 folds, manifesting a moderate interaction. Hence, in CYP2C9*1/*1 and CYP2C9*1/*3 genotypes, silybin A is a weak CYP inhibitor for losartan while in CYP2C9*1/*2 genotype, the co-administration of silybin consequents into a moderate pharmacokinetic interaction with losartan.

Fabrication of moxifloxacin HCl-loaded biodegradable chitosan nanoparticles for potential antibacterial and accelerated cutaneous wound healing efficacy.

AIM: This work aims to formulate topical hybrid gel containing chitosan-coated moxifloxacin (MXF) HCl nanoparticles (NPs) with enhanced antibacterial and healing activity. METHODS: MXF HCl NPs prepared by the ionic gelation method were loaded onto a hybrid chitosan carbomer gel. Size analysis of the prepared NPs was performed using SEM and Zeta-sizer. Further characterisation was done using Fourier transforms infra-red spectroscopy (FTIR), X-ray diffraction (XRD), and Thermogravimetric analysis (TGA). Prepared gel was evaluated for its in vitro drug release, biocompatibility, antibacterial activity, and stability studies under storage conditions. In-vivo wound healing was measured by observing percentage reduction in wound. RESULTS: NPs have 359 ± 79 nm mean particle size, 31.01 mV zeta potential with 0.008 polydispersity index (PD1), 63.5% drug entrapment and 83 ± 3.5% drug release at pH 5.5. Hybrid chitosan carbomer gel showed good biocompatibility, antibacterial, in-vivo wound healing properties and stable properties. CONCLUSIONS: NP-loaded hybrid gel can be an effective treatment for acute and challenged topical wounds.

Prevalence of Mastitis Pathogens and Antimicrobial Susceptibility of Isolates From Cattle and Buffaloes in Northwest of Pakistan.

Mastitis is the most prevalent disease of dairy animals, imparting huge economic losses to the dairy industry. There is always a dire need to monitor the prevalence of mastitis, its bacteriology, and evaluation of antimicrobial susceptibilities for mastitis control and prevention. Therefore, the objectives of this study were to investigate: (i) the prevalence of mastitis in cattle and buffaloes; (ii) identification of bacteria associated with mastitis; (iii) antimicrobial susceptibility of bacterial isolates. Milk samples (n = 1,566) from cattle (n = 1,096) and buffaloes (n = 470) were processed for detection of mastitis using the California mastitis test in the year 2018-19. A total of 633 mastitic milk samples were further processed for bacteriology and antimicrobial susceptibility testing by the disc diffusion method. Overall, the prevalence of clinical and subclinical mastitis was 17 and 57% in both species. Clinical mastitis was higher in cattle (20%) compared to buffaloes (11%), whereas subclinical was higher in buffaloes (66%) than cattle (53%). Besides, month-wise prevalence was higher in hot and humid months in both species. Staphylococci spp. (34%) were the most predominant bacterial isolates from mastitic milk, followed by Escherichia coli (19.4%), Streptococci spp. (9%), and Klebsiella spp. (8%). Most of the bacteria were susceptible to gentamicin (92%) and enrofloxacin (88%), when a panel of 16 different antimicrobials was tested. Nevertheless, most of the isolates were resistant to sulphamethoxazole (99%), lincomycin (98%), oxytetracycline (89%), ampicillin (86%), and doxycycline (85%). This study concludes a high prevalence of mastitis caused by Staphylococcal spp. in cattle and buffaloes belonging to the northwest of Pakistan, and gentamicin and enrofloxacin might be appropriate antimicrobial agents in the treatment of bovine mastitis.

Formulation development and in vitro characterization of triple layer tablet containing amlodipine besylate, rosuvastatin calcium and hydrochlorothiazide.

Triple layered tablet having various excipients and a new combination of APIs i.e. amlodipine besylate, rosuvastatin calcium and hydrochlorothiazide was prepared through wet granulation. The concentration of disintegrant and diluent was kept different in formulations of all APIs. At compression stage, nine different formulations from H1 to H9 having different combinations were prepared. Layers T1, T2 and T3 of all the three APIs had disintegrant concentration of 3%, 5% and 7 % respectively. In vitro analysis of granules was made by determining angle of repose, loss on drying, bulk density, tapped density, hausner ratio. Results of all these parameters were quite similar in all layers, which showed that change in disintegrant concentration does not affect the flow ability of granules to much extent. After compression, tablets were further subjected to weight variation, hardness, thickness, friability, disintegration, dissolution studies and FTIR. In vitro drug release data of all formulations were studied which showed that all the formulations exhibited zero order release. Results indicated that H8 had the best results in terms of physicochemical properties, assay and dissolution studies. The external morphology of formulations were further analyzed using scanning electron microscopy and differential scanning calorimetry. Triple layered tablet was successfully developed and characterized.

Development, characterization and optimization of methotrexate-olive oil nano-emulsion for topical application.

The chronic inflammatory conditions like psoriasis has an increased prevalence and is linked with various associated life threatening disease conditions. The main objective of this project was to developed a methotrexate-olive loaded nano emulsion. The formulation was assessed for various parameters including Thermodynamic Stability, physico-chemically characterization, drug release kinetics and entrapment efficiency and in vitro/ in vivo skin permeation analysis. Final optimized formulation had a particle size 18.27±5.78 nm with a PDI of 0.25±0.01, whereas the average entrapment efficiency of formulation was 74.68±2.1%. The release kinetics suggested 97.72% drug release at pH 5 after 20 hrs. The FTIR data confirmed that the chemical structure of drug is retained with efficient loading into the formulation. Permeation data showed that an average of 79.23±3.6µg/cm2 of methotrexate was permeated from the nano emulsion with an average flux of 2.326±0.45µg/cm2/h after 24 hrs. Finally in vivo studies on rabbit skin confirmed that the structural changes of intercellular lipid layers in the stratum corneum are not responsible for enhanced skin permeation of methotrexate loaded nano emulsion. It was concluded that olive oil based MTX-NE is suitable for topical application and can be used for management of psoriasis.

Oral bioavailability studies of niosomal formulations of Cyclosporine A in albino rabbits.

Cyclosporine A (CsA) is an immunosuppressant agent. Two niosomal formulations of CsA, FTS and FSB were formulated. Both formulations were studied in terms of size, polydispersity index (PDI), morphology and entrapment efficacy etc. Niosomal formulations FTS and FSB and plain aqueous dispersion were given to three assemblies of Albino rabbits (n=8 per group). CsA levels in plasma were determined at appropriate time intervals and pharmacokinetic parameters were evaluated. The percentage entrapment efficiencies of FTS and FSB were found to be 77.29 and 89.31% for respectively. Transmission electron microscopy results indicated spherical nature of niosomes. In vivo studies demonstrated that the value of Cmax for the FSB formulation was 1968.419 ng/ml and it was 1498.951 ng/ml and 1073.87 ng/ml for FTS and aqueous dispersion of CsA (control) respectively. It was found that both niosomal formulation FTS & FSB presented significantly high (p<0.05) Cmax, AUC0-t, MRT 0-inf and half-life (t1/2) as associated to plain drug dispersion. However niosomal formulation FSB exhibited better in-vivo performance as compared to FTS. It was established that CsA can be successfully entrapped in niosomes. So niosomes are promising vehicle for CsA oral delivery.

Formulation and Evaluation of a Clove Oil-Encapsulated Nanofiber Formulation for Effective Wound-Healing.

Wound-healing is complicated process that is affected by many factors, especially bacterial infiltration at the site and not only the need for the regeneration of damaged tissues but also the requirement for antibacterial, anti-inflammatory, and analgesic activity at the injured site. The objective of the present study was to develop and evaluate the natural essential oil-containing nanofiber (NF) mat with enhanced antibacterial activity, regenerative, non-cytotoxic, and wound-healing potential. Clove essential oil (CEO) encapsulated in chitosan and poly-ethylene oxide (PEO) polymers to form NFs and their morphology was analyzed using scanning electron microscopy (SEM) that confirmed the finest NFs prepared with a diameter of 154 ± 35 nm. The successful incorporation of CEO was characterized by Fourier transform infra-red spectroscopy (FTIR) and X-ray diffractometry (XRD). The 87.6 ± 13.1% encapsulation efficiency and 8.9 ± 0.98% loading of CEO was observed. A total of 79% release of CEO was observed in acidic pH 5.5 with 117% high degree of swelling. The prepared NF mat showed good antibacterial activity against Staphylococcus aureus and Escherichia coli and non-cytotoxic behavior against human fibroblast cell lines and showed good wound-healing potential.

Asphodelus tenuifolius extracts arrested inflammation and arthritis through modulation of TNF-α, NF-κB, ILs, and COX-2 activities in in vivo models.

Asphodelus tenuifolius is traditionally used in the management of rheumatic pain and inflamed body parts. The current study validated its traditional use as an anti-arthritic and anti-inflammatory agent using a series of in vivo models. Carrageenan and histamine-induced acute oedema models were employed to study the effects of n-hexane (n-HeAT) and ethanolic (EeAT) extracts on acute inflammatory mediators and were found to inhibit oedema formation in a dose-dependent manner. Formalin and complete Freund's adjuvant (CFA) were injected into the hind paw of rats for the induction of arthritis. In the formalin model both n-HeAT and EeAT showed significantly better (p < 0.05) anti-oedema effects from day 6 onward. In CFA model rats were treated on 8th day of induction with extracts at the doses of 250, 500, and 750 mg/kg respectively. Piroxicam (10 mg/kg) and normal saline (10 mL/kg) were used as positive and negative controls respectively. Both n-HeAT and EeAT significantly (p < 0.05) decreased arthritis development in a time-dependent manner and at 28th day extent of inflammation was even less than that observed at day 8. The arthritic score was measured at day 12, 16, 20, 24, and 28 and was observed to be significantly less (p < 0.05) in animals treated with 750 mg/kg of n-HeAT and EeAT, respectively. Joint inflammation (p < 0.01), bone erosion (p < 0.001) and, pannus formation (p < 0.01) were significantly declined in A. tenuifolius treatment groups. Radiographic evaluations (X-ray) were conducted to check bone integrity and extent of inflammation and were observed to be diminished at day 28 in A. tenuifolius extracts treated groups. HPLC was performed to screen the phytochemical profile of n-HeAT and EeAT and were found to contain flavonoids and phenolic compounds. Quantitative real-time polymerase chain reaction (qPCR) was performed to detect effects of n-HeAT and EeAT treatments on inflammatory markers i.e., IL-4, IL-6, IL-10, COX-2, NF-κB, and I-κB using blood samples. ELISA assays were performed for the detection of levels of C-reactive proteins, respectively. Significant downregulation of TNF-α, IL-4, IL-6, IL-1ß, COX-2, NF-κB with simultaneous upregulation of IL-10 and I-κB was observed in n-HeAT and EeAT treatment groups. ELISA assays also showed significant (p < 0.05) down-modulation in the serum levels of CRP and TNF-α. Both extracts showed relatively weak antioxidant activities as compared with ascorbic acid in in vitro assay. Based on findings of the current study it is concluded that A. tenuifolius has anti-inflammatory and anti-arthritic effects and thus has potential to be used as an adjunct to standard NSAIDs therapy.Graphic abstract.

In vitro Characterization and Release Studies of Combined Nonionic Surfactant-Based Vesicles for the Prolonged Delivery of an Immunosuppressant Model Drug.

BACKGROUND: Cyclosporine A (CsA) is an exceptional immunosuppressant used for the treatment of immune disorders. Niosomal vesicles are promising drug carriers that are formed by self-association of nonionic surfactants and cholesterol in an aqueous phase. The objective of the study was to formulate combined nonionic surfactant based vesicles and to evaluate their in vitro characterization, release studies and in vivo studies. MATERIALS AND METHODS: Five niosomal formulations (F7 to F11) were prepared using the thin film hydration method. The molar ratio of cholesterol and non-ionic surfactant taken was 1:1. In formulation F10, the combination of surfactants Span 20 and Brij 35 was used. The niosomes were characterized by zeta sizer and SEM for particle size analysis, in vitro drug release and stability studies. The pharmacokinetic studies were conducted on healthy albino rabbits. RESULTS: The size of niosome was found in the range of 427.1 nm to 972.3 nm. SEM image of optimized formulations F10 exhibit the spherical nature of niosomal vesicles. DSC thermograms of niosomal formulations exhibited a broadened endothermic peak. The stability study exhibited that all formulations are stable and negligible change of vesicle size and entrapment was observed with time. The percentage drug release was significantly higher as compared to CsA plain dispersion for all niosomal formulations at pH 1.2 and 7.4. The release kinetic behavior showed that all preparations were best described by zero order and can release active ingredient in a sustained manner. The pharmacokinetic data showed the test formulation (F10) possessed greater bioavailability as compared to the reference formulation (CsA aqueous dispersion). CONCLUSION: The formulation F10 demonstrated a comparatively more delayed rate of release with enhanced dissolution as compared to a single surfactant scheme. The F10 formulation can be a remarkable nanotechnology for prolonged delivery of CsA orally with improved dissolution profile and bioavailability.

Effect of Hydrophilic Polymers on Complexation Efficiency of Cyclodextrins in Enhancing Solubility and Release of Diflunisal.

The effects of three hydrophilic polymers, namely, carboxymethyl cellulose sodium (CMC-Na), polyvinyl alcohol (PVA) and poloxamer-188 (PXM-188) on the solubility and dissolution of diflunisal (DIF) in complexation with ß-cyclodextrin (ßCD) or hydroxypropyl ß-cyclodextrin (HPßCD), were investigated. The kneading method was used at different drug to cyclodextrin weight ratios. Increases in solubility and drug release were observed with the DIF/ßCD and DIF/HPßCD complexes. The addition of hydrophilic polymers at 2.5, 5.0 and 10.0% w/w markedly improved the complexation and solubilizing efficiency of ßCD and HPßCD. Fourier-transform infrared (FTIR) showed that DIF was successfully included into the cyclodextrin cavity. Differential scanning calorimetry (DSC) and X-ray diffractometry (XRD) confirmed stronger drug amorphization and entrapment in the molecular cage of cyclodextrins. The addition of PVA, CMC-Na or PXM-188 reduced further the intensity of the DIF endothermic peak. Most of the sharp and intense peaks of DIF disappeared with the addition of hydrophilic polymers. In conclusion, PXM-188 at a weight ratio of 10.0% w/w was the best candidate in enhancing the solubility, stability and release of DIF.