RESUMO
A highly flexible and cost-effective copper tape decorated with silver nanoparticles (Cu-TAg) has been developed for surface-enhanced Raman spectroscopy (SERS) sensing of multi-hazardous environmental pollutants. Highly ordered and spherical-shaped silver nanoarrays have been fabricated using a low-cost thermal evaporation method. The structural, morphological, and optical properties of Cu-TAg sensors have been studied and correlated to the corresponding SERS performances. The size of nanoparticles has been successively tuned by varying the deposition time from 5 to 25 s. The nanoparticle sizes were enhanced with an increase in the evaporation time. SERS investigations have revealed that the sensing potential is subsequently improved with an increase in deposition time up to 10 s and then deteriorates with further increase in Ag deposition. The highest SERS activity was acquired for an optimum size of ~ 37 nm; further simulation studies confirmed this observation. Moreover, Cu-TAg sensors exhibited high sensitivity, reproducibility, and recycling characteristics to be used as excellent chemo-sensors. The lower detection limit estimation revealed that it can sense even in the pico-molar range for sensing of rhodamine 6G and methylene blue. The estimated enhancement factor of the sensor is found to be 9.4 × 107. Molecular-specific sensing of a wide range of pollutants such as rhodamine 6G, alizarin red, methylene blue, butylated hydroxy anisole, and penicillin-streptomycin is demonstrated with high efficiencies for micromolar spiked samples. Copper tape functionalized with Ag arrays thus demonstrated to be a promising candidate for low-cost and reusable chemo-sensors for environmental remediation applications.
RESUMO
Surface enhanced Raman scattering (SERS) is an important analytical tool for the optochemical detection of molecules. The enhancement is commonly achieved by engineering (i) novel types and morphologies of plasmonic nanomaterials, and (ii) patterned or roughened supporting substrates of high surface area for increased light scattering and molecule adsorption. Si substrates can be easily and reproducibly textured for effective SERS applications. In this work, silver nanoprisms (AgNPr) coated silicon nanowire (SiNWs) of different morphologies have been prepared by metal-assisted chemical etching and tested for SERS detection of R6G dye. By varying the etching time from 5 to 30 min, the nanowires' lengths increased from 2.4 to 10.5 µm and resulted in a variable topological morphology of the substrates in terms of bundles and valleys. We found that an optimum of 10 min etching time led to the highest SERS enhancement of R6G on AgNPr/SiNWs at 612 cm-1 Raman shift (30× compared to R6G/Si and 2× compared to R6G/AgNPr/Si), with a detection limit comparable to that of state-of-the-art performances (down to 5×10-10 M of R6G). Such an enhancement is attributed to a middle ground between increased overall surface area of SiNWs, and the available bundle tops trapping the AgNPr and R6G molecules.
