Electroosmotic MHD ternary hybrid Jeffery nanofluid flow through a ciliated vertical channel with gyrotactic microorganisms: Entropy generation optimization.

In this study, the computational analysis of entropy generation optimization for synthetic cilia regulated ternary hybrid Jeffery nanofluid (Ag-Au-TiO2/PVA) flow through a peristaltic vertical channel with swimming motile Gyrotactic microorganisms is investigated. Understanding the intricate interaction of multiple physical phenomena in biomedical applications is essential for optimizing entropy generation and advancing microfluidic systems. The characteristics of nanofluid are explored for the electroosmotic MHD fluid flow in the presence of thermophoresis and Brownian motion, viscous dissipation, Ohmic heating and chemical reaction. Using the appropriate transformations, a set of ordinary differential equations are created from the governing partial differential equations. The resulting ODEs are numerically solved using the shooting technique using BVP5C in MATLAB after applying the long-wavelength and low Reynolds number approximation. The velocity, temperature, concentration, electroosmosis, and microorganism density profiles are analyzed graphically for different emerging parameters. Graphical investigation of engineering interest quantities like heat transfer rate, mass transfer rate, skin friction coefficient, and entropy generation optimization are also presented. It is observed that the rate of mass transfer increases for increasing thermophoretic parameter, while reverse effect is noted for Brownian motion parameter, Schmidt number, and chemical reaction number. The outcomes of present study can be pertinent in studying Cilia properties of respiratory tract, reproductive system, and brain ventricles.

Entropy generation optimization of cilia regulated MHD ternary hybrid Jeffery nanofluid with Arrhenius activation energy and induced magnetic field.

This study deals with the entropy generation analysis of synthetic cilia using a ternary hybrid nanofluid (Al-Cu-Fe2O3/Blood) flow through an inclined channel. The objective of the current study is to investigate the effects of entropy generation optimization, heat, and mass transfer on ternary hybrid nanofluid passing through an inclined channel in the proximity of the induced magnetic field. The novelty of the current study is present in studying the combined effect of viscous dissipation, thermophoresis, Brownian motion, exponential heat sink/source, porous medium, endothermic-exothermic chemical reactions, and activation energy in the proximity of induced magnetic field is examined. The governing partial differential equations (PDEs) are transformed into the ordinary differential equations (ODEs) using appropriate transformations. Applying the low Reynolds number and the long-wavelength approximation, resultant ODEs are numerically solved using shooting technique via BVP5C in MATLAB. The velocity, temperature, concentration, and induced magnetism profiles are visually discussed and graphically analyzed for various fluid flow parameters. Graphical analysis of physical interest quantities like mass transfer rate, heat transfer rate, entropy generation optimization, and skin friction coefficient are also graphically discussed. The entropy generation improves for enhancing values of Reynolds number, solutal Grashof number, heat sink/source parameter, Brinkman number, magnetic Prandtl number, and endothermic-exothermic reaction parameter while the reverse effect is noticed for chemical reaction and induced magnetic field parameter. The findings of this study can be applied to enhance heat transfer efficiency in biomedical devices, optimizing cooling systems, designing efficient energy conversion processes, and spanning from renewable energy technologies to aerospace propulsion systems.

Entropy generation optimization for the electroosmotic MHD fluid flow over the curved stenosis artery in the presence of thrombosis.

The present study deals with the entropy generation analysis on the flow of an electrically conductive fluid (Blood) with [Formula: see text]-suspended nanoparticles through the irregular stenosed artery with thrombosis on the catheter. The fluid flow can be actuated by the interactions of different physical phenomena like electroosmosis, radiation, Joule heating and a uniform radial magnetic field. The analysis of different shapes and sizes of the nanoparticle is considered by taking the Crocine model. The velocity, temperature, and concentration distributions are computed using the Crank-Nicholson method within the framework of the Debye-Huckel linearization approximation. In order to see how blood flow changes in response to different parameters, the velocity contour is calculated. The aluminium oxide nanoparticles employed in this research have several potential uses in biomedicine and biosensing. The surface's stability, biocompatibility, and reactivity may be enhanced by surface engineering, making the material effective for deoxyribonucleic acid sensing. It may be deduced that the velocity profile reduces as the nanoparticle's size grows while depicts the reverse trend for the shape size. In a region close to the walls, the entropy profile decreases, while in the region in the middle, it rises as the magnetic field parameter rises. The present endeavour can be beneficial in biomedical sciences in designing better biomedical devices and gaining insight into the hemodynamic flow for treatment modalities.

Life cycle cost analysis of municipal solid waste management scenarios for Mumbai, India.

This study quantifies and compares the cost of municipal solid waste (MSW) management systems under different scenarios using life cycle cost (LCC) analysis approach. LCC analysis was performed for six integrated MSW management scenarios for Mumbai city, India which generates over 9000 metric tonnes of MSW daily and disposes most of it in open dumps. The scenarios are the combinations of recycling, composting, anaerobic digestion, incineration with electricity generation, and landfill with biogas recovery. To perform LCC analysis of scenarios, present worth method was used. The present worth of operations and maintenance (O&M) cost and revenue generated was estimated using a discount rate of 11.25% for a 20-year life span. Results show that the incineration based scenario is the most cost-intensive option with a net LCC of US$38 per tonne of MSW due to the high capital cost involved in case of incineration. While the scenario with a combination of recycling and sanitary landfill was the most economically viable option with a net LCC of US$19 per tonne of MSW due to comparative lower operating cost. The sensitivity analysis shows that the O&M cost was the most sensitive parameter and a change of ±10% and ±20% in O&M cost, the net LCC of scenarios changes in the range of 14-33% and 29-65%, respectively. This study provides an economic comparison of MSW treatment scenarios from a life cycle perspective, which facilitates the decision-making process for improvement in cost estimation and planning of waste management strategies in India.

Stretchable Electroluminescent Display Enabled by Graphene-Based Hybrid Electrode.

Stretchable alternating-current electroluminescent (ACEL) devices are required due to their potential in wearable, biomedical, e-skin, robotic, lighting, and display applications; however, one of the main hurdles is to achieve uniform electroluminescence with an optimal combination of transparency, conductivity, and stretchability in electrodes. We therefore propose a fabrication scheme involving strategically combining two-dimensional graphene layers with a silver nanowire (Ag NW)-embedded PEDOT:PSS film. The developed hybrid electrode overcomes the limitations of commonly known metallic NWs and ionic conductor-based electrodes for ACEL applications. Furthermore, the potential of the hybrid electrode is realized in demonstrating large-area stretchable ACEL devices composed of an 8 × 8 passive array. The prototype ACEL passive array demonstrates efficient and uniform electroluminescence under high levels of mechanical deformation such as bending, rolling, twisting, and stretching.

All MoS2-Based Large Area, Skin-Attachable Active-Matrix Tactile Sensor.

Large-area, ultrathin flexible tactile sensors with conformal adherence are becoming crucial for advances in wearable electronics, electronic skins and biorobotics. However, normal passive tactile sensors suffer from high crosstalk, resulting in inaccurate sensing, which consequently limits their use in such advanced applications. Active-matrix-driven tactile sensors could potentially overcome such hurdles, but it demands the high performance and reliable operations of the thin-film-transistor array that could efficiently control integrated pressure gauges. Herein, we utilized the benefit of the semiconducting and mechanical excellence of MoS2 and placed it between high- k Al2O3 dielectric sandwich layers to achieve the high and reliable performance of MoS2-based back-plane circuitry and strain sensor. This strategical combination reduces the fabrication complexity and enables the demonstration of an all MoS2-based large area (8 × 8 array) active-matrix tactile sensor offering a wide sensing range (1-120 kPa), sensitivity value (Δ R/ R0: 0.011 kPa-1), and a response time (180 ms) with excellent linearity. In addition, it showed potential in sensing multitouch accurately, tracking a stylus trajectory, and detecting the shape of an external object by grasping it using the palm of the human hand.

High-Performance All-Printed Amorphous Oxide FETs and Logics with Electronically Compatible Electrode/Channel Interface.

Oxide semiconductors typically show superior device performance compared to amorphous silicon or organic counterparts, especially when they are physical vapor deposited. However, it is not easy to reproduce identical device characteristics when the oxide field-effect transistors (FETs) are solution-processed/printed; the level of complexity further intensifies with the need to print the passive elements as well. Here, we developed a protocol for designing the most electronically compatible electrode/channel interface based on the judicious material selection. Exploiting this newly developed fabrication schemes, we are now able to demonstrate high-performance all-printed FETs and logic circuits using amorphous indium-gallium-zinc oxide (a-IGZO) semiconductor, indium tin oxide (ITO) as electrodes, and composite solid polymer electrolyte as the gate insulator. Interestingly, all-printed FETs demonstrate an optimal electrical performance in terms of threshold voltages and device mobility and may very well be compared with devices fabricated using sputtered ITO electrodes. This observation originates from the selection of electrode/channel materials from the same transparent semiconductor oxide family, resulting in the formation of In-Sn-Zn-O (ITZO)-based-diffused a-IGZO-ITO interface that controls doping density while ensuring high electrical performance. Compressive spectroscopic studies reveal that Sn doping-mediated excellent band alignment of IGZO with ITO electrodes is responsible for the excellent device performance observed. All-printed n-MOS-based logic circuits have also been demonstrated toward new-generation portable electronics.

Flexible active-matrix organic light-emitting diode display enabled by MoS2 thin-film transistor.

Atomically thin molybdenum disulfide (MoS2) has been extensively investigated in semiconductor electronics but has not been applied in a backplane circuitry of organic light-emitting diode (OLED) display. Its applicability as an active drive element is hampered by the large contact resistance at the metal/MoS2 interface, which hinders the transport of carriers at the dielectric surface, which in turn considerably deteriorates the mobility. Modified switching device architecture is proposed for efficiently exploiting the high-k dielectric Al2O3 layer, which, when integrated in an active matrix, can drive the ultrathin OLED display even in dynamic folding states. The proposed architecture exhibits 28 times increase in mobility compared to a normal back-gated thin-film transistor, and its potential as a wearable display attached to a human wrist is demonstrated.

Two-dimensional materials in functional three-dimensional architectures with applications in photodetection and imaging.

Efficient and highly functional three-dimensional systems that are ubiquitous in biology suggest that similar design architectures could be useful in electronic and optoelectronic technologies, extending their levels of functionality beyond those achievable with traditional, planar two-dimensional platforms. Complex three-dimensional structures inspired by origami, kirigami have promise as routes for two-dimensional to three-dimensional transformation, but current examples lack the necessary combination of functional materials, mechanics designs, system-level architectures, and integration capabilities for practical devices with unique operational features. Here, we show that two-dimensional semiconductor/semi-metal materials can play critical roles in this context, through demonstrations of complex, mechanically assembled three-dimensional systems for light-imaging capabilities that can encompass measurements of the direction, intensity and angular divergence properties of incident light. Specifically, the mechanics of graphene and MoS2, together with strategically configured supporting polymer films, can yield arrays of photodetectors in distinct, engineered three-dimensional geometries, including octagonal prisms, octagonal prismoids, and hemispherical domes.

Life cycle assessment of potential municipal solid waste management strategies for Mumbai, India.

Dumping of municipal solid waste into uncontrolled dumpsites is the most common method of waste disposal in most cities of India. These dumpsites are posing a serious challenge to environmental quality and sustainable development. Mumbai, which generates over 9000 t of municipal solid waste daily, also disposes of most of its waste in open dumps. It is important to analyse the impact of municipal solid waste disposal today and what would be the impact under integrated waste management schemes. In this study, life cycle assessment methodology was used to determine the impact of municipal solid waste management under different scenarios. Six different scenarios were developed as alternatives to the current practice of open dumping and partially bioreactor landfilling. The scenarios include landfill with biogas collection, incineration and different combinations of recycling, landfill, composting, anaerobic digestion and incineration. Global warming, acidification, eutrophication and human toxicity were assessed as environmental impact categories. The sensitivity analysis shows that if the recycling rate is increased from 10% to 90%, the environmental impacts as compared with present scenario would reduce from 998.43 kg CO2 eq t-1 of municipal solid waste, 0.124 kg SO2 eq t-1, 0.46 kg PO4-3 eq t-1, 0.44 kg 1,4-DB eq t-1 to 892.34 kg CO2 eq t-1, 0.121 kg SO2 eq t-1, 0.36 kg PO4-3 eq t-1, 0.40 kg 1,4-DB eq t-1, respectively. An integrated municipal solid waste management approach with a mix of recycling, composting, anaerobic digestion and landfill had the lowest overall environmental impact. The technologies, such as incineration, would reduce the global warming emission because of the highest avoided emissions, however, human toxicity would increase.

Photo-patternable ion gel-gated graphene transistors and inverters on plastic.

We demonstrate photo-patternable ion gel-gated graphene transistors and inverters on plastic substrates. The photo-patternable ion gel can be used as a negative photoresist for the patterning of underlying graphene as well as gate dielectrics. As a result, an extra graphene-patterning step is not required, which simplifies the device fabrication and avoids a side effect arising from the photoresist residue. The high capacitance of ion gel gate dielectrics yielded a low voltage operation (~2 V) of the graphene transistor and inverter. The graphene transistors on plastic showed an on/off-current ratio of ~11.5, along with hole and electron mobilities of 852 ± 124 and 452 ± 98 cm(2) V(-1) s(-1), respectively. In addition, the flexible graphene inverter was successfully fabricated on plastic through the potential superposition effect from the drain bias. These devices show excellent mechanical flexibility and fatigue stability.

Graphene-P(VDF-TrFE) multilayer film for flexible applications.

A flexible, transparent acoustic actuator and nanogenerator based on graphene/P(VDF-TrFE)/graphene multilayer film is demonstrated. P(VDF-TrFE) is used as an effective doping layer for graphene and contributes significantly to decreasing the sheet resistance of graphene to 188 ohm/sq. The potentiality of graphene/P(VDF-TrFE)/graphene multilayer film is realized in fabricating transparent, flexible acoustic devices and nanogenerators to represent its functionality. The acoustic actuator shows good performance and sensitivity over a broad range of frequency. The output voltage and the current density of the nanogenerator are estimated to be ∼3 V and ∼0.37 µAcm(-2), respectively, upon the application of pressure. These values are comparable to those reported earlier for ZnO- and PZT-based nanogenerators. Finally, the possibility of rollable devices based on graphene/P(VDF-TrFE)/graphene structure is also demonstrated under a dynamic mechanical loading condition.

Stress dependent band gap shift and valence band studies in ZnO nanorods.

ZnO nanorods are grown on seedless and ZnO seeded glass substrates using chemical solution method and their structural, morphological, optical and valence band studies have been carried out. On seedless substrate horizontal nanorods are observed whereas for the seeded substrates vertically aligned hollow and solid nanorods grows. X-ray diffraction analysis revealed the presence of tensile stress in the vertical nanorods. Blue shift has been observed in the band gap of the vertical nanorods as compared to the horizontal nanorods which is attributed to the presence of tensile stress in the vertically aligned nanorods. Photoluminescence spectra revealed the dominance of Zinc vacancies (V(Zn)) related defects in the nanorods and oxygen defects are found to be higher in the vertically aligned nanorods as compared to the horizontal nanorods. The difference between the Fermi level and valence band maxima for horizontal, hollow vertical and solid vertical nanorods are found to be approximately 0.56 eV, approximately 0.70 eV and approximately 0.92 eV respectively indicating the possibility of p-type of conduction in the nanorods which has been attributed to presence of V(Zn) defects in the ZnO nanorods.