Research on the function of the Cend1 regulatory mechanism on p75NTR signaling in spinal cord injury.

How to use NSC repair mechanisms, minimize the loss of neurons, and recover the damaged spinal cord functions are hotspots and difficulties in spinal cord injury research. Studies have shown that Cend1 signaling is involved in regulating the NSC differentiation, that p75NTR signaling is involved in the regulation of mature neuronal apoptosis and that NSC differentiation decreases mature neuron apoptosis. Our research group found an interaction between Cend1 and p75NTR, and there was a correlation with spinal cord injury. Therefore, we speculate that Cend1 regulates p75NTR signals and promotes the differentiation of NSCs, and inhibits neuronal apoptosis. Therefore, this study first analyzed the expression of p75NTR and Cend1 in spinal cord injury and its relationship with NSCs and neurons and then analyzed the regulatory mechanism and the mechanism of survival on neuronal apoptosis and differentiation of NSCs. Finally, we analyzed the effect of p75NTR and the regulation of Cend1 damage on functional recovery of the spinal cord with overall intervention. The completion of the subject will minimize the loss of neurons, innovative use of NSC repair mechanisms, and open up a new perspective for the treatment of spinal cord injury.

A palladium-catalyzed ring-expansion reaction of cyclobutanols with 2-haloanilines leading to benzazepines and quinolines.

A general synthesis of 2-aryl benzazepines has been developed through palladium-catalyzed ring-expansion reactions of cyclobutanols with 2-haloanilines; the further oxidative rearrangement reaction of benzazepines provided an efficient synthesis of 2-acyl quinolines. These transformations feature the efficient construction of six- and seven-membered N-containing heterocycles from easily obtained materials with excellent functional group tolerance.

Copper-Catalyzed Selective Defluorinative Sulfuration of Trifluoropropanamides Leading to α-Fluorothioacrylamides.

A practical and efficient method for the synthesis of α-fluorothioacrylamide was developed from selective defluorinative sulfuration of trifluoropropanamides with disulfides. The N-chelation-assisted copper-catalyzed defluorination and sulfurization reactions feature excellent functional group tolerance and incorporation of both sulfur atoms of disulfides into acrylamides.

Microstructure, Pitting Corrosion Resistance and Impact Toughness of Duplex Stainless Steel Underwater Dry Hyperbaric Flux-Cored Arc Welds.

Duplex stainless steel multi-pass welds were made at 0.15 MPa, 0.45 MPa, and 0.75 MPa pressure, simulating underwater dry hyperbaric welding by the flux-cored arc welding (FCAW) method, with welds of normal pressure as a benchmark. The purpose of this work was to estimate the effect of ambient pressure on the microstructure, pitting corrosion resistance and impact toughness of the weld metal. The microstructure measurement revealed that the ferrite content in the weld metal made at 0.45 MPa is the lowest, followed by that of 0.75 MPa and 0.15 MPa. The analysis of potentiodynamic polarization tests at 30 °C and 50 °C demonstrated that the pitting corrosion resistance depends on the phases of the lower pitting resistance equivalent numbers (PREN), secondary austenite and ferrite. The weld metal made at 0.45 MPa had the best resistance to pitting corrosion at 30 °C and 50 °C with the highest PRENs of secondary austenite and ferrite. The weld metal made at 0.15 MPa displayed the lowest pitting corrosion resistance at 30 °C with the lowest PREN of secondary austenite, while the weld metal made at 0.75 MPa was the most seriously eroded after being tested at 50 °C for the lowest PREN of ferrite, with large cluster pits seen in ferrite at 50 °C. The impact tests displayed a typical ductile-brittle transition because of the body-centered cubic (BCC) structure of the ferrite when the test temperature was lowered. All the weld metals met the required value of 34 J at -40 °C according to the ASTM A923. The highest ferrite content corresponded to the worst impact toughness, but the highest toughness value did not correspond to the greatest austenite content. With the decreasing of the test temperature, the drop value of absorbed energy was correlated to the ferrite content. Additionally, in this work, the weld metal made at 0.45 MPa had the best combined properties of pitting resistance and impact toughness.