A trinary support of Ni/NiO/C to immobilize Ir nanoclusters for alkaline hydrogen oxidation.

The hydrogen oxidation reaction is an important process in anion exchange membrane fuel cells with alkaline solutions. The pursuit of efficient catalysts for alkaline hydrogen oxidation has attracted considerable attention. In this study, we present a precursor route for the synthesis of a new Ir-based catalyst (Ir-Ni/NiO/C), in which Ir nanoclusters were immobilized on the generated Ni/NiO/C support derived from a metal-organic framework. The small size of Ir clusters facilitates the exposure of catalytically active sites. The electronic interplay between the Ir nanoclusters and the Ni/NiO/C support optimized the hydrogen binding energy (HBE) and hydroxide binding energy (OHBE) on the surface, which is unattainable on the contrasting Ir-C, Ir-Ni/C, and Ir-NiO/C products. The optimized catalyst shows excellent mass activity for alkaline hydrogen oxidation, which is 3.1 times that of the Pt/C catalyst. This study presents a promising pathway for the development of advanced HOR catalysts.

Nitrogen-Doped Carbon Dots Modified Fe-Co Sulfide Nanosheets as High-Efficiency Electrocatalysts toward Oxygen Evolution Reaction.

Developing high-efficiency and stable oxygen evolution reaction (OER) electrocatalysts is an imperative requirement to produce green and clean hydrogen energy. In this work, the FeCoSy /NCDs composite with nitrogen-doped carbon dots (NCDs) modified Fe-Co sulfide (FeCoSy ) nanosheets is prepared by using a facile and mild one-pot solvothermal method. Benefiting from the low crystallinity and the synergistic effect between FeCoSy and NCDs, the optimal FeCoSy /NCDs-3 composite exhibits an overpotential of only 284 mV at 10 mA cm-2 , a small Tafel value of 52.1 mV dec-1 , and excellent electrochemical durability in alkaline solution. Remarkably, unlike ordinary metal sulfide electrocatalysts, the morphology, components, and structure of the FeCoSy /NCDs composite can be well retained after OER test. The NCDs modified FeCoSy composite with excellent electrocatalytic performance provides an effective approach to boost metal sulfide electrocatalysts for practical application.

Rational Design of High-Performance Electrodes Based on Ferric Oxide Nanosheets Deposited on Reduced Graphene Oxide for Advanced Hybrid Supercapacitors.

The core strategy for constructing ultra-high-performance hybrid supercapacitors is the design of reasonable and effective electrode materials. Herein, a facile solvothermal-calcination strategy is developed to deposit the phosphate-functionalized Fe2O3 (P-Fe2O3) nanosheets on the reduced graphene oxide (rGO) framework. Benefiting from the superior conductivity of rGO and the high conductivity and fast charge storage dynamics of phosphate ions, the synthesized P-Fe2O3/rGO anode exhibits remarkable electrochemical performance with a high capacitance of 586.6 F g-1 at 1 A g-1 and only 4.0% capacitance loss within 10 000 cycles. In addition, the FeMoO4/Fe2O3/rGO nanosheets are fabricated by utilizing Fe2O3/rGO as the precursor. The introduction of molybdates successfully constructs open ion channels between rGO layers and provides abundant active sites, enabling the excellent electrochemical features of FeMoO4/Fe2O3/rGO cathode with a splendid capacity of 475.4 C g-1 at 1 A g-1. By matching P-Fe2O3/rGO with FeMoO4/Fe2O3/rGO, the constructed hybrid supercapacitor presents an admirable energy density of 82.0 Wh kg-1 and an extremely long working life of 95.0% after 20 000 cycles. Furthermore, the continuous operation of the red light-emitting diode for up to 30 min demonstrates the excellent energy storage properties of FeMoO4/Fe2O3/rGO//P-Fe2O3/rGO, which provides multiple possibilities for the follow-up energy storage applications of the iron-based composites.

Systematic sequential therapy for ex vivo liver resection and autotransplantation: A case report and review of literature.

BACKGROUND: Perihilar cholangiocarcinoma (pCCA) is a highly malignant tumor arising from the biliary tree. Radical surgery is the only treatment offering a chance of long-term survival. However, limited by the tumor's anatomic location and peri-vascular invasion, most patients lose the chance for curative treatment. Therefore, more methods to increase the resectability of tumors as well as to improve outcomes are needed. CASE SUMMARY: A 68-year-old female patient had a hepatic hilar mass without obvious symptoms. Laboratory results showed hepatitis B positivity. Magnetic resonance imaging indicated that the mass (maximum diameter: 41 mm) invaded the left and right branches of the main portal vein, as well as the middle, left and right hepatic veins; enlarged lymph nodes were also detected in the hilum. The patient was diagnosed with pCCA, and the clinical stage was determined to be T4N1M0 (stage IIIC). Considering the tumor's anatomic location and vascular invasion, systematic conversion therapy followed by ex vivo liver resection and autotransplantation (ELRA) was determined as personalized treatment for this patient. Our original systemic sequential therapeutic strategy (lenvatinib and tislelizumab in combination with gemcitabine and cisplatin) was successfully adopted as conversion therapy because she achieved partial response after three cycles of treatment, without severe toxicity. ELRA, anastomotic reconstruction of the middle hepatic vein, right hepatic vein, root of portal vein, inferior vena cava and right hepatic artery, and lymph node dissection were performed at one month after systemic therapy. Pathological and immunohistochemical examination confirmed the diagnosis of pCCA with lymph node metastasis. Although the middle hepatic vein was partially obstructed four months later, hepatic vein stent implantation successfully addressed this problem. The patient has survived for 22 mo after the diagnosis, with no evidence of recurrence or metastasis. CONCLUSION: An effective therapeutic strategy for conversion therapy greatly increases the feasibility and efficiency of ELRA.

Improvement of image-type very-low-energy-electron-diffraction spin polarimeter.

Spin- and angle-resolved photoemission spectroscopy (SARPES) with high efficiency and resolution plays a crucial role in exploring the fine spin-resolved band structures of quantum materials. Here, we report the performance of the SARPES instrument with a second-generation home-made multichannel very-low-energy-electron-diffraction spin polarimeter. Its energy and angular resolutions achieve 7.2 meV and 0.52°, respectively. We present the results of SARPES measurements of Bi(111) film to demonstrate its performance. Combined with the density functional theory calculations, the spin polarization of the bulk states was confirmed by the spin-layer locking caused by the local inversion asymmetry. The surface states at a binding energy of 0.77 eV are found with 1.0 ± 0.11 spin polarization. Better resolutions and stability compared with the first-generation one provide a good platform to investigate the spin-polarized electronic states in materials.

Construction of NiFe(CN)5NO/Ni3S2 hierarchical submicro-rods on nickel foam as advanced oxygen evolution electrocatalysts.

The development of cheap, abundant, and highly efficient electrocatalysts for the oxygen evolution reaction (OER) is urgently needed for hydrogen production from water splitting. Herein, we demonstrate a novel OER electrocatalyst (NiFe(CN)5NO/Ni3S2) prepared by coupling Ni3S2 and a bimetallic metal-organic framework (MOF) of NiFe(CN)5NO on nickel foam (NF) via a simple two-step route. The NiFe(CN)5NO/Ni3S2 electrocatalyst displays an interesting rod-like hierarchical architecture assembled by ultrathin nanosheets. The combination of NiFe(CN)5NO and Ni3S2 optimizes the electronic structure of the metal active sites and increases the electron transfer capability. Benefitting from the synergistic effect between Ni3S2 and the NiFe-MOF as well as the unique hierarchical architecture, the NiFe(CN)5NO/Ni3S2/NF electrode exhibits excellent electrocatalytic OER activity with ultralow overpotentials of 162/197 mV at 10/100 mA cm-2 and an ultrasmall Tafel slope of 26 mV dec-1 in 1.0 M KOH, which are far superior to those of the individual NiFe(CN)5NO, Ni3S2 and commercial IrO2 catalysts. In particular, unlike common metal sulfide-based electrocatalysts, the composition, morphology and microstructure of the NiFe-MOF/Ni3S2 composite electrocatalyst can be well retained after the OER, which endows it with fantastic long-term durability. This work offers a new strategy for the construction of novel and high-efficiency MOF-based composite electrocatalysts for energy applications.

Opsin 3 mediates UVA-induced keratinocyte supranuclear melanin cap formation.

Solar ultraviolet (UV) radiation-induced DNA damage is a major risk factor for skin cancer development. UV-induced redistribution of melanin near keratinocyte nuclei leads to the formation of a supranuclear cap, which acts as a natural sunscreen and protects DNA by absorbing and scattering UV radiation. However, the mechanism underlying the intracellular movement of melanin in nuclear capping is poorly understood. In this study, we found that OPN3 is an important photoreceptor in human epidermal keratinocytes and is critical for UVA-mediated supranuclear cap formation. OPN3 mediates supranuclear cap formation via the calcium-dependent G protein-coupled receptor signaling pathway and ultimately upregulates Dync1i1 and DCTN1 expression in human epidermal keratinocytes via activating calcium/CaMKII, CREB, and Akt signal transduction. Together, these results clarify the role of OPN3 in regulating melanin cap formation in human epidermal keratinocytes, greatly expanding our understanding of the phototransduction mechanisms involved in physiological function in skin keratinocytes.

In Situ Construction of Zn2Mo3O8/ZnO Hierarchical Nanosheets on Graphene as Advanced Anode Materials for Lithium-Ion Batteries.

Transition-metal oxides as anodes for lithium-ion batteries (LIBs) have attracted enormous interest because of their high theoretical capacity, low cost, and high reserve abundance. Unfortunately, they commonly suffer from poor electronic and ionic conductivity and relatively large volume expansion during discharge/charge processes, thereby triggering inferior cyclic performance and rate capability. Herein, a molybdenum-zinc bimetal oxide-based composite structure (Zn2Mo3O8/ZnO/rGO) with rectangular Zn2Mo3O8/ZnO nanosheets uniformly dispersed on reduced graphene oxide (rGO) has been prepared by using a simple and controllable cyanometallic framework template method. The Zn2Mo3O8/ZnO rectangular nanosheets with desirable porous features are composed of nanocrystalline subunits, facilitating the exposure of abundant active sites and providing sufficient contact with the electrolyte. Benefiting from the composition and structural merits as well as the induced synergistic effects, the Zn2Mo3O8/ZnO/rGO composite as LIB anodes delivers superior electrochemical properties, including high reversible capacity (960 mA h g-1 after 100 cycles at 200 mA g-1), outstanding rate performance (417 mA h g-1 at 10,000 mA g-1), and admirable long-term cyclic stability (862 mA h g-1 after 400 cycles at 1000 mA g-1). The mechanism of lithium storage and the formation of SEI film are systematically elucidated. This work provides an effective strategy for synthesizing promising Mo-cluster compound-based anodes for high-performance LIBs.

Anti-swellable cellulose hydrogel for underwater sensing.

Underwater sensing is of great significance in ocean exploration by divers to monitor their movements and keep in touch with the shore. However, unique sensors are required to apply in the marine environment that is quite different from the land circumstance. Herein, we reported a cellulose-skeleton-based composite hydrogel that is constraint to expand underwater under the effect of hydrogen bonds (H-bonds) and features advantages of high swelling resistance, structural durability, mechanical robustness, medium flexibility, high gauge factor (2.33) and long-term stability in water as a highly efficient wearable underwater sensor. This cellulose-based anti-swellable underwater hydrogel sensor showed tremendous potentials in underwater sensing applications for posture monitoring, communication, and marine biological research, etc.

Epoxy-functionalized polyethyleneimine modified epichlorohydrin-cross-linked cellulose aerogel as adsorbents for carbon dioxide capture.

Developing affordable and effective carbon dioxide (CO2) capture technology has attracted substantial intense attention due to the continued growth of global CO2 emissions. The low-cost and biodegradable cellulosic materials are developed into CO2 adsorbent recently. Epoxy-functionalized polyethyleneimine modified epichlorohydrin-cross-linked cellulose aerogel (EBPCa) was synthesized from alkaline cellulose solution, epoxy-functionalized polyethyleneimine (EB-PEI), and epichlorohydrin (ECH) through the freezing-thawing processes and freeze-drying. The Fourier transform infrared spectroscopy confirmed that the cellulose aerogel was successfully modified by EB-PEI. The X-ray photoelectron spectroscopy analyses confirmed the presence of N 1s and Cl 2p in EBPCa, meaning that the chlorine of ECH and the amino groups of EB-PEI exist in the cellulose surface. The obtained sample has a rich porous structure with a specific surface area in the range of 97.5-149.5 m2/g. Owing to its uniformly three-dimensional porous structure, the sample present preferable rigidity and carrying capacity, which 1 g of sample could easily carry the weight of a 3000 ml Erlenmeyer flask filled with water (total 4 kg). The sample showed good adsorption performance, with a maximum adsorption capacity of 6.45 mmol/g. This adsorbent has broad prospects in the CO2 capture process.

Conductive Cellulose-Derived Carbon Nanofibrous Membranes with Superior Softness for High-Resolution Pressure Sensing and Electrophysiology Monitoring.

Here, a strategy to overcome the stiff and brittle nature of cellulose-derived carbon nanofibrils (CCNFs) is proposed through a facile, low-cost, and scalable approach. Flexible and conformal CCNFs with a low bending rigidity below 55.4 mN and tunable conductivities of 0.14-45.5 S m-1 are developed by introducing silanol as a multieffect additive in the electrospun hybrid nanofibrous network and subsequent carbonization at a relatively high temperature (900 °C) and chemical vapor deposition of polypyrrole (PPy) on the hybrid carbon nanofibril surface. Silica acts as a lubricant in each rigid carbon fiber to improve flexibility of the CCNF structure as well as a template during cellulose carbonization to prevent the melting of carbon nanofibrils. Meanwhile, the uniform coating of PPy leads to an improvement in electrical conductivity while conserving the porous structure and compressibility of the CCNF nets. These conductive hybrid CCNF films are evaluated as mechanoreceptors and physiological sensors, which are demonstrated to be applied in intelligent electronics including electronic skin, human-machine interfaces, and epidermic electrodes. The design or working principles of the hybrid CCNFs for achieving optimum applicable effects when applied in different scenarios are revealed.

Molten salt-confined pyrolysis towards heteroatom-doped porous carbon nanosheets for high-energy-density Zn-ion hybrid supercapacitors.

Carbon nanosheets with heteroatom doping and well-developed porosity exhibit broad application foreground for Zn-ion hybrid supercapacitors (ZHSCs), but the simple and controllable preparation is still of great challenge. In this study, by using LiCl-KCl as in-built templates, histidine as carbon and nitrogen sources, and KNO3, K2SO4, KOH or Na2S2O3 as active agent, a series of N and NS doped porous carbon nanosheets are developed. Results indicate that, with the activator introduction, pore structures of the carbonized products are notably boosted, showing an astounding 30-244 % increase in BET specific surface area, and meanwhile, heteroatom with a content of ca. 12 % can be doped into the resultant carbon skeletons. Specifically, the NSPCN-800 (activated by Na2S2O3) with a large specific surface area of 1297 m2/g, a hierarchically porous structure composed of abundant micropores and mesopores, and a suitable heteroatom content (N: 11.9 wt%; S: 0.6 wt%) presents an impressive energy storage behavior as cathode for ZHSCs, including a specific capacitance of 165.8F/g, a specific capacity of 95.2 mAh/g, an energy density of 59.0 Wh kg-1 and a cyclic stability with a 82.6 % capacity retention after 5000 cycles. These performance parameters surpass numerous reported ZHSCs, making NSPCN-800 a very promising cathode for practical use.

N-Doped Carbon as a Promoted Substrate for Ir Nanoclusters toward Hydrogen Oxidation in Alkaline Electrolytes.

Development of effective electrocatalysts toward hydrogen oxidation with a low content of noble metals has attracted the attention of the catalytic community. In this work, a novel catalyst composed of nitrogen-doped carbon acting as the substrate and Ir nanoclusters as active species was prepared, which was then employed as an effective catalyst for the hydrogen oxidation reaction (HOR) in an alkaline electrolyte. In 0.1 M KOH, the optimized catalyst provides an exchange current density of 0.144 mA cmIr-2 for HOR that outperforms the catalytic activity of the commercial Pt/C catalyst with a Pt content of 20 wt %. The substrate induces highly active Ir sites that markedly boosted the electrocatalytic activity for HOR. The nitrogen-doped carbon substrate increases the stability of Ir nanoclusters and decreases the absorption energy of hydrogen on Ir sites; at the same time, the higher electrostatic potential around the adsorbed hydrogen on Ir/N-doped carbon also enables them to be easily attracted by OH- species, both of which enhanced the catalytic activity. The excellent catalytic activity and the understanding shown here will give some hints for the development of HOR catalysts used in alkaline electrolytes.

In-situ synthesis of NiS2 nanoparticles/MoS2 nanosheets hierarchical sphere anchored on reduced graphene oxide for enhanced electrocatalytic hydrogen evolution reaction.

As an important energy storage and transportation carrier, hydrogen has the advantages of high combustion heat, non-toxic, and pollution-free energy conversion process. Bimetallic sulfide composites are one of the emerging catalysts for hydrogen evolution reactions (HER) during water splitting. Herein, a hydrothermal method has been employed for the in-situ synthesis of NiS2 nanoparticles/MoS2 nanosheets (NiS2/MoS2) hierarchical sphere anchored on reduced graphene oxide (RGO) for enhanced electrocatalytic HER activity. The NiS2/MoS2/RGO composite displays improved HER activity compared to MoS2/RGO and NiS2/RGO. The optimized NiS2/MoS2/RGO-9 requires only an overpotential of 136 mV at a current density of 10 mA cm-2, a small Tafel slope of 53.4 mV dec-1, and good stability in acid solution. The synergetic effect between NiS2 nanoparticles and MoS2 nanosheets is responsible for enhanced HER performance. Moreover, RGO provides the substrate for NiS2/MoS2 species and maintains the overall conductivity of NiS2/MoS2/RGO composites. Finally, density functional theory (DFT) calculations justify and approve the efficient HER activity of NiS2/MoS2/RGO in terms of lower Gibbs free energy (0.07 eV) and lower work function (3.98 eV) that subsequently enhance the dissociation of H2O.

A novel circRNA, circRACGAP1, hampers the progression of systemic lupus erythematosus via miR-22-3p-mediated AKT signalling.

BACKGROUND: Systemic lupus erythematosus (SLE) is defined as a multisystem autoimmune disease involving various organs, of which exact molecular mechanisms remain elusive. Here, we aimed to investigate a novel circular RNA (circRNA), circRACGAP1, abnormally expressed in SLE and explored its underlying regulatory network. METHODS: The expression patterns of circRACGAP1 were determined in patients diagnosed with SLE by using a qRT-PCR assay. Spearman correlation analysis was employed to evaluate the correlation between circRACGAP1 and clinicopathological variables in patients with SLE. Flow cytometry and TUNEL assays were subjected to assess the cell apoptosis. Nuclear-cytoplasmic fractionation and luciferase reporter assay was used to verify the circRACGAP1/miR-22-3p/PTEN axis. Western blot analysis was performed to measure the PTEN/AKT signalling-related proteins and apoptotic-related biomarkers. RESULTS: Down-regulated circRACGAP1 was observed and correlated with Systemic Lupus Erythematosus Disease Activity Index (SLEDAI) score, anti-double-stranded (ds) DNA, and complement C3 level in patients with SLE. Overexpression of circRACGAP1 significantly alleviated cell apoptosis in Jurkat cells within UVB exposure. Mechanistic investigation revealed that circRACGAP1 could serve as a sponge of miR-22-3p to regulate PTEN/AKT signalling. CONCLUSIONS: Collectively, circRACGAP1 regulated the AKT signalling pathway via binding to miR-22-3p in the progression of SLE, suggesting therapeutic targets for SLE treatment.

Melatonin Induces Autophagy in Amyotrophic Lateral Sclerosis Mice via Upregulation of SIRT1.

Amyotrophic lateral sclerosis (ALS) is the neurodegenerative disease that leads to the motor dysfunction damaged by both upper and lower motor neurons. The etiology and pathogenesis of ALS hasn't completely been understood yet up to now, the current study suggests that autophagy plays an important role in the development of ALS. Meanwhile, melatonin is found to inhibit the progression of ALS. To this end, this study aimed to investigate the potential relation between melatonin and autophagy in ALS. The in vivo model of ALS was established to investigate the effects of melatonin in ALS. The mRNA expressions were performed to detect by RT-qPCR, and the protein levels were tested by western blot and immunofluorescence histochemistry staining. The inflammatory cytokine was applied to detect by ELISA. The results showed that melatonin dose-dependently reversed the ALS-induced survival time shortened, weight loss and rotating rod latency decrease. The expressions of both SIRT1 and Beclin-1 as well as the ratio of LC3II/LC3I were significantly upregulated in the ALS mice, while melatonin reversed the upregulation of both SIRT1 and Beclin-1 expression and LC3II/LC3I ratio in a dose-dependent manner. In contrast, melatonin dose-dependently significantly restored the ALS-induced downregulation of p62. Furthermore, SIRT1 silencing notably reduced the effect of melatonin on Beclin-1, LC3II/LC3I, and p62. Melatonin induced autophagy in the ALS mice via the upregulation of SIRT1. Thus, melatonin might act as a new agent for the treatment of ALS.

Morphology-Dependent Electrocatalytic Performance of a Two-Dimensional Nickel-Iron MOF for Oxygen Evolution Reaction.

Developing highly efficient, low-cost, and durable oxygen evolution reaction (OER) electrocatalysts is extraordinarily desirable for achieving clean and sustainable hydrogen energy. Metal-organic frameworks (MOFs) are emerging as attractive candidates for OER electrocatalysts. Herein, a two-dimensional Fe-Ni MOF of Fe(py)2Ni(CN)4 (py = pyridine) is synthesized controllably to generate various nanostructures, including nanoboxes, nanocubes, nanoplates, and nanosheets. Since different morphologies expose different active crystal planes and generate disparate intrinsic active sites, these nanostructures exhibit obviously different electrocatalytic activities. Particularly, the nanoboxes with a hollow structure display superior electrocatalytic activity and stability for OER due to greater active surface area and higher intrinsic activity of the exposed crystal planes, delivering a low overpotential of 285 mV at 10 mA cm-2 and a small Tafel value of 50.9 mV dec-1 in a 1.0 M KOH solution. The morphology-dependent electrocatalytic properties demonstrated in this work provide an efficient strategy to optimize MOF precatalysts for electrochemical energy storage and conversion.

Serum Creatinine to Cystatin C Ratio is an Effective Indicator for Muscle Strength Decline in Men with Acute Exacerbation of Chronic Obstructive Pulmonary Disease.

Purpose: This study explored the value of the serum creatinine/cystatin C (Cr/CysC) ratio in diagnosing the reduction of muscle strength in men with acute exacerbation of chronic obstructive pulmonary disease (AECOPD). Patients and Methods: In this study, we enrolled 72 male patients with AECOPD and 32 male patients with stable chronic obstructive pulmonary disease (COPD). We compared clinical characteristics between the AECOPD and stable COPD groups. Then, we subdivided AECOPD patients into normal muscle strength and low muscle strength groups; we compared the clinical characteristics between these two groups. We analyzed the relationships of serum creatinine (Cr), cystatin C (CysC), and Cr/CysC ratio with clinical characteristics in male AECOPD patients. We also investigated whether the Cr/CysC ratio could aid in the diagnosis of muscle strength decline via receiver operating characteristic curve and binary logistic regression analysis. Results: We found that handgrip strength, Cr/CysC ratio, serum Cr, FEV1, FVC, and FEV1%pred were lower in AECOPD patients than in stable COPD patients. Among AECOPD patients, BMI, weight, FEV1, FVC, FEV1%pred, and Cr/CysC ratio were lower in the low muscle strength group than in the normal muscle strength group; there were more patients with ≥2 acute exacerbations within the past year in the low muscle strength group. The Cr/CysC ratio was correlated with handgrip strength, FEV1, FVC, FEV1%pred, BMI and weight. The area under curve for low handgrip strength was greater for the Cr/CysC ratio than for Cr. Binary logistic regression analysis showed that a Cr/CysC ratio <0.99 was a risk factor for decreased muscle strength in male patients with AECOPD. Conclusion: The Cr/CysC ratio is a useful predictor of muscle strength decline in male AECOPD patients, while a low Cr/CysC ratio is a risk factor for muscle strength decline in male patients with AECOPD.

Metal-organic frameworks-derived carbon modified wood carbon monoliths as three-dimensional self-supported electrodes with boosted electrochemical energy storage performance.

Wood-derived carbon monoliths, in recent years, have attracted tremendous interest in the field of energy storage, but their electrochemical characteristics are still far from satisfactory. Here, we report a universal and efficient approach for the preparation of structure-engineered, heteroatom-functionalized and property-boosted wood carbons. A two-step ion-exchange process greatly enriches the nucleation sites of ZIF-8 on the inner wall of wood tracheids, hence leading to a unique carbon/carbon heterostructure after carbonizing and acid-washing. Particularly, the prepared NPCM-900 with a large specific surface area of 708.2 m2 g-1, a hierarchical porous architecture and a suitable N content of 2.3% delivers an ultrahigh area-normalized specific capacitance of 23.7 F cm-2 at 5 mA cm-2, which stands for a new capacitive record among the wood-based binder-free electrodes. The NPCM-900//NPCM-900 all-solid-state supercapacitor has an admirable energy density of 9.3 Wh m-2 at 24.9 W m-2 and a large power density of 248.3 W m-2 at 4.8 Wh m-2, while the NPCM-900 based Zn-ion hybrid supercapacitor (NPCM-900//Zn) exhibits a superior energy density of 12.7 Wh m-2. Furthermore, the NPCM-900//NPCM-900 and NPCM-900//Zn present great stabilities with capacitance retentions of 87% and 85%, respectively, after 5000 cycles. These parameters notably outperform those of most wood-based supercapacitors, endowing the NPCM-900 with extensive prospects for practical use.