RESUMO
We present a simple approach for patterning metal nanoparticles into periodic superstructures on flat films spanning centimeter-square areas. Our approach is based on capillary force lithography, a soft lithography method that is used to impart topography to molten polymer films, and applies it to block copolymer films to obtain substrates featuring both topographic and chemical contrasts that can serve as templates for the selective deposition of nanoparticles. Here we show that flattening the films by exposure to solvent vapour prior to nanoparticle deposition not only retains chemical heterogeneity but also provides access to unique hierarchically-organized nanoparticle superstructures that are unattainable by other methods. Such structures could be useful for optical, sensor, and catalytic applications.
RESUMO
Directed self-assembly of block copolymers is evolving toward applications that are more defect-tolerant but still require high morphological control and could benefit from simple, inexpensive fabrication processes. Previously, we demonstrated that simply casting ultra-thin block copolymer films on topographically defined substrates leads to hierarchical structures with dual patterns in a controlled manner and unraveled the dependence of the local morphology on the topographic feature dimensions. In this article, we discuss the extreme of the ultraconfined thickness regime at the border of film dewetting. Additional non-bulk morphologies are observed at this extreme, which further elaborate the arsenal of dual patterns that could be obtained in coexistence with full placement control. It is shown that as the thickness confinement approaches its limit, lateral confinement imposed by the width of the plateaus becomes a critical factor influencing the local morphology.
RESUMO
Soft lithography techniques have become leading mesoscale approaches for replicating topographic features in polymer films. So far, modified polymer films formed by soft lithography only featured topographic heterogeneity. Here we demonstrate the application of soft lithography techniques to block copolymer films, and show that the preferential affinity of one of the blocks to the stamping material leads to chemical heterogeneity that corresponds to the topographic features. Detailed surface and structural characterization of the patterned films provided information on its three-dimensional structure, revealing insights on the domain reorganization that takes place in the block copolymer film concomitantly with topography formation. The formed structures were utilized for the selective assembly of gold nanoparticles into hierarchical structures. The versatility of this combined nanofabrication/self-assembly approach was demonstrated by the assembly of two types of metallic nanoparticles into two different arrangements with full control over the location of each type of nanoparticles.
RESUMO
The ability to create mixed morphologies using easily controlled parameters is crucial for the integration of block copolymers in advanced technologies. We have previously shown that casting an ultrathin block copolymer film on a topographically patterned substrate results in different deposited thicknesses on the plateaus and in the trenches, which leads to the co-existence of two patterns. In this work, we highlight the dependence of the dual patterns on the film profile. We suggest that the steepness of the film profile formed across the plateau edge affects the nucleation of microphase-separated domains near the plateau edges, which influences the morphology that develops on the plateau regions. An analysis of the local film thicknesses in multiple samples exhibiting various combinations of plateau and trench widths for different trench depths enabled the construction of phase diagrams, which unraveled the intricate dependence of the formed patterns not only on the curvature of the film profile but also on the fraction of the film that resides in the trenches. Our analysis facilitates the prediction of the patterns that would develop in the trenches and on the plateaus for a given block copolymer film of known thickness from the dimensions of the topographic features.
RESUMO
The collective properties of ordered ensembles of anisotropically shaped nanoparticles depend on the morphology of organization. Here, we describe the utilization of block copolymer micelles to bias the natural packing tendency of semiconductor nanorods and organize them into circularly arranged superstructures. These structures are formed as a result of competition between the segregation tendency of the nanorods in solution and in the polymer melt; when the nanorods are highly compatible with the solvent but prefer to segregate in the melt to the core-forming block, they migrate during annealing toward the core-corona interface, and their superstructure is, thus, templated by the shape of the micelle. The nanorods, in turn, exhibit surfactant-like behavior and protect the micelles from coalescence during annealing. Lastly, the influence of the attributes of the micelles on nanorod organization is also studied. The circular nanorod arrangements and the insights gained in this study add to a growing list of possibilities for organizing metal and semiconductor nanorods that can be achieved using rational design.
RESUMO
Arrays of alternating metallic nanostructures present hybrid properties, which are useful for applications in photonics and catalysis. Block copolymer films provide versatile templates for fabricating periodic arrays of nanowires. Yet, creating arrays with alternating compositions or structures requires different modifications of domains of the same kind. By controlling the penetration depth of metal precursors into the film we were able to impregnate different layers of copolymer cylinders with different metals. Capitalizing on the hexagonal packing of the cylinders led to simultaneous formation of nanowires with alternating compositions and periodic arrangement on the substrate after plasma etching. Selective deposition of nanoparticles on the film enabled creating alternating bare and decorated nanowires, as well as trimetallic nanowire arrays.
RESUMO
Various types of devices require hierarchically nanopatterned substrates, where the spacing between patterned domains is controlled. Ultraconfined films exhibit extreme morphological sensitivity to slight variations in film thickness when the substrate is highly selective toward one of the blocks. Here, it is shown that using the substrate's topography as a thickness differentiating tool enables the creation of domains with different surface patterns in a fully controlled fashion from a single, unblended block copolymer. This approach is applicable to block copolymers of different compositions and to different topographical patterns and thus opens numerous possibilities for the hierarchical construction of multifunctional devices.
RESUMO
Polyelectrolyte multilayers (PEMs) assembled layer-by-layer have emerged as functional polymer films that are both stable and capable of containing drug molecules for controlled release applications. Most of these applications concentrate on sustained release, where the concentration of the released molecules remains rather constant with time. However, high-efficiency delivery requires obtaining high local concentrations at the vicinity of the cells, which is achieved by triggered release. Here, we show that a nanopatterned PEM platform demonstrates superior properties with respect to drug retention and triggered delivery. A chemically modified block copolymer film was used as a template for the selective deposition of poly(ethylene imine) and a charged derivative of the electroactive poly(3,4-ethylenedioxythiophene) together with a drug molecule. This nanopatterned PEM shows the following advantages: (1) high drug loading; (2) enhanced retention of the bioactive molecule; (3) release triggered by an electrochemical stimulus; (4) high efficacy of drug delivery to cells adsorbed on the surface compared to the delivery efficacy of a similar concentration of drug to cells suspended in a solution.
Assuntos
Sistemas de Liberação de Medicamentos/métodos , Técnicas Eletroquímicas/métodos , Iminas , Membranas Artificiais , Polietilenos , Animais , Iminas/química , Iminas/farmacologia , Camundongos , Células NIH 3T3 , Polietilenos/química , Polietilenos/farmacologiaRESUMO
A block copolymer-based assembly approach for the creation of nano-patterned polyelectrolyte multilayers over cm2-scale areas is presented. Up to 5 bi-layers were selectively assembled on top of specific nano-domains featuring different morphologies. The successful isolation of nanoscale objects corresponding in shape to the template features is also demonstrated. This methodology is applicable to different types of polyelectrolytes, and opens up a new dimension for layer-by-layer construction.
RESUMO
Quasi-block copolymers (q-BCPs) are block copolymers consisting of conventional and supramolecular blocks, in which the conventional block is end-terminated by a functionality that interacts with the supramolecular monomer (a "chain stopper" functionality). A new design of q-BCPs based on a general polymeric chain stopper, which consists of polystyrene end-terminated with a sulfonate group (PS-SO3 Li), is described. Through viscosity measurements and a detailed diffusion-ordered NMR spectroscopy study, it is shown that PS-SO3 Li can effectively cap two types of model supramolecular monomers to form q-BCPs in solution. Furthermore, differential scanning calorimetry data and structural characterization of thin films by scanning force microscopy suggests the existence of the q-BCP architecture in the melt. The new design considerably simplifies the synthesis of polymeric chain stoppers; thus promoting the utilization of q-BCPs as smart, nanostructured materials.
RESUMO
Nano-patterned materials are beneficial for applications such as solar cells, opto-electronics, and sensing owing to their periodic structure and high interfacial area. Here, we present a non-lithographic approach for assembling polyelectrolytes into periodic nanoscale patterns over cm(2)-scale areas. Chemically modified block copolymer thin films featuring alternating charged and neutral domains are used as patterned substrates for electrostatic self-assembly. In-depth characterization of the deposition process using spectroscopy and microscopy techniques, including the state-of-the-art scanning transmission X-ray microscopy (STXM), reveals both the selective deposition of the polyelectrolyte on the charged copolymer domains as well as gradual changes in the film topography that arise from further penetration of the solvent molecules and possibly also the polyelectrolyte into these domains. Our results demonstrate the feasibility of creating nano-patterned polyelectrolyte layers, which opens up new opportunities for structured functional coating fabrication.
RESUMO
ITO electrodes modified with a nanopatterned film of polystyrene-block-poly(2-vinylpyridine), PS-b-P2VP, where the P2VP domains are quaternized with iodomethane, are used for selective deposition of redox-active materials. Electrochemical studies (cyclic voltammetry, Faradaic impedance measurements) indicate that the PS domains insulate the conductive surface toward redox labels in solution. In turn, the quaternized P2VP domains electrostatically attract negatively charged redox labels solubilized in the electrolyte solution, resulting in an effective electron transfer between the electrode and the redox label. This phenomenon is implemented for the selective deposition of the electroactive Prussian blue on the nanopatterned surface and for the electrochemical deposition of Au nanoparticles, modified with a monolayer of p-aminothiophenol/2-mercaptoethanesulfonic acid, on the quaternized P2VP domains. The patterned Prussian blue-modified surface enables controlling the wettability properties by the content of the electrochemically deposited Prussian blue. Controlled wettability is unattainable with the homopolymer-modified surface, attesting to the role of the nanopattern.
RESUMO
When poly(2-vinyl pyridine) is combined with Pd-pincer-based organometallic surfactants, a mesomorphic structure forms due to weak stacking interactions between the pyridine units and the Pd-pincer headgroups. The weak binding between the surfactant and the polymer competes with the tendency of the aliphatic tails of the surfactant to crystallize. Here, we demonstrate that over extended periods of incubation, the crystallization tendency of the surfactant tails causes the surfactant molecules to detach from the polymer and gives rise to additional packing modes of the alkyl tails featuring higher crystalline order. The dynamic behavior of these aged structures was investigated by variable-temperature small-angle X-ray scattering (SAXS) and solid-state (13)Câ NMR, and revealed the influence of thermal changes on the molecular level, and how these changes propagate to the mesoscale structure.
RESUMO
External electric fields readily align birefringent block-copolymer mesophases. In this study the effect of gold nanoparticles on the electric-field-induced alignment of a lamellae-forming polystyrene-block-poly(2-vinylpyridine) copolymer is assessed. Nanoparticles are homogeneously dispersed in the styrenic phase and promote the quantitative alignment of lamellar domains by substantially lowering the critical field strength above which alignment proceeds. The results suggest that the electric-field-assisted alignment of nanostructured block copolymer/nanoparticle composites may offer a simple way to greatly mitigate structural and orientational defects of such films under benign experimental conditions.
RESUMO
Dodecanethiol-capped gold nanoparticles (NPs) deposited onto a poly(ethylene glycol) substrate quickly coarsen over a timescale of days when stored under ambient conditions. The NP coarsening was studied at different surface coverages and temperatures. The coarsening of NPs depended on their location on the film; NPs located inside the channels coarsened in a different fashion than NPs deposited on the plateaus. Size distributions studied by image analysis and comparison to theoretical distribution functions shed light on the coarsening mechanism in each case, revealing the role of dimensionality.
RESUMO
We investigate the kinetics of block copolymer/nanoparticle composite alignment in an electric field using in situ transmission small-angle X-ray scattering. As a model system, we employ a lamellae forming polystyrene-block-poly(2-vinyl pyridine) block copolymer with different contents of gold nanoparticles in thick films under solvent vapor annealing. While the alignment improves with increasing nanoparticle fraction, the kinetics slows down. This is explained by changes in the degree of phase separation and viscosity. Our findings provide extended insights into the basics of nanocomposite alignment.
RESUMO
The ability to assemble nanoparticles (NPs) into desired patterns in a controlled fashion is crucial for the study of collective properties and for the fabrication of a variety of NP-based devices. Drying-mediated assembly directed by a template provides a facile route for organizing NPs in predefined patterns. We utilize the branched topographical landscapes displayed by partially crystallized poly(ethylene glycol) (PEG) films as a generic template for studying the drying-mediated organization of dodecanethiol- and polystyrene thiol-protected gold NPs (Au-DT and Au-PS), and explore the combined effects of NP size and ligand, concentration, and spin rate on the distribution of NPs inside the channels. We show how NP concentration and the spin rate applied during NP deposition can be used to influence the tendency of NPs either to fill the channel uniformly or to localize near the channel edges, explain the important role of the enhanced aggregation tendency of larger NPs on the resulting morphologies, and demonstrate how this tendency can be tuned by the proper choice of ligands. The different effects are explained in the context of possible scenarios of drying-mediated assembly by analyzing the relevant interactions and forces acting on the NPs during solvent evaporation.
RESUMO
The supramolecular dimerization of tetraanionic corannulene is utilized as a self-assembly motif for the construction of highly charged, buckybowl-based supramolecular oligomers. Oligomers of up to 7 units (3900 g mol(-1)) of reduced dicorannulenic monomers are identified and characterized by various NMR techniques, and the reversibility of their assembly is established through the concentration dependence of their molecular weight and the effect of monofunctional chain-stoppers.
RESUMO
Using computer simulation of a coarse-grained model for supramolecular polymers, we investigate the potential of quasiblock copolymers (QBCPs) assembled on chemically patterned substrates for creating device-oriented nanostructures. QBCPs are comprised of AB diblock copolymers and supramolecular B segments that can reversibly bond to any available B terminus, on either the copolymers or the B oligomers, creating a polydisperse blend of B homopolymers, and AB and ABA copolymers. We demonstrate the defect-free replication of patterns with perpendicularly crossing, A-preferential lines, where the same QBCP can simultaneously replicate patterns differing by up to 50% in their length scales. We demonstrate how the pattern affects the distribution of molecular architectures and the key role of supramolecular associations for replicating patterns with different length scales.