[Advances of gut-on-a-chip for exploring host-microbe interactions].

The human gut is a complex ecosystem harboring rich microbes that play a key role in the nutrient absorption, drug metabolism, and immune responses. With the continuous development of microfluidics and organ-on-a-chip, gut-on-a-chip has become a powerful tool for modeling host-microbe interactions. The chip is able to mimic the complex physiological environment of the human gut in vitro, providing a unique platform for studying host-microbe interactions. Firstly, we introduce the physiological characteristics of the human gut. Secondly, we comprehensively summarize the advantages of the microfluidic chip in vitro recapitulating the intestinal system by integrating microenvironmental factors, such as complex cell components, dynamic fluids, oxygen gradients, and mechanical mechanics. Thirdly, we expound the key performance indicators for evaluating the construction performance of gut-on-a-chip. In addition, we review the progress of gut-on-a-chip models in the research on gut microecology, disease modeling, and drug evaluation. Finally, we highlight the challenges and prospects in the applications of the emerging technology. The above is summarized with a view to informing the application of gut-on-a-chip for indepth studies of gut microbe-host interactions.

Hierarchical electrodes with superior cycling performance using porous material based on cellulose nanofiber as flexible substrate.

The development and application of flexible electrodes with extended cycle life have long been a focal point in the field of energy research. In this study, positively charged polyethylene imine (PEI) and conductive polymer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) with negative charge were alternately deposited onto a cellulose nanofiber (CNF) porous material utilizing pressure gradient-assisted layer-by-layer (LbL) self-assembly technology. The flexible substrate, characterized by a three-dimensional porous structure reinforced with stiff CNF, not only facilitated high charge storage but also enhanced the electrode's cycling life by reducing the volume changes of PEDOT:PSS. Furthermore, the exceptional wettability of PEI by the electrolyte could promote efficient charge transport within the electrode. The electrode with 10 PEI/PEDOT:PSS bilayer exhibits a capacitance of 63.71 F g-1 at the scan rate of 5 mV s-1 and a remarkable capacitance retention of 128 % after 3000 charge-discharge cycles. The investigation into the nanoscale layers of the LbL multilayer structure indicated that the exceptional cyclic performance was primarily attributed to the spatial constraints imposed by the rigid porous substrate layered structure on the deformation of PEDOT:PSS. This work is expected to make a significant contribution to the development of electrodes with high charge storage capacity and ultra-long cycling life.

Lysosomal membrane protein TMEM106B modulates hematopoietic stem and progenitor cell proliferation and differentiation by regulating LAMP2A stability.

Hematopoietic stem and progenitor cells (HSPCs) are successfully employed for hematological transplantations, and impaired HSPC function causes hematological diseases and aging. HSPCs maintain the lifelong homeostasis of blood and immune cells through continuous self-renewal and maintenance of the multilineage differentiation potential. TMEM106B is a transmembrane protein localized on lysosomal membranes and associated with neurodegenerative and cardiovascular diseases; however, its roles in HSPCs and hematopoiesis are unknown. Here, we established tmem106bb-/- knockout (KO) zebrafish and showed that tmem106bb KO reduced the proliferation of HSPCs during definitive hematopoiesis. The differentiation potential of HSPCs to lymphoid lineage was reduced, whereas the myeloid and erythroid differentiation potentials of HPSCs were increased in tmem106bb-/- zebrafish. Similar results were obtained with morpholino knockdown of tmem106bb. Mechanistically, TMEM106B interacted with LAMP2A, the lysosomal associated membrane protein 2A, impaired LAMP2A-Cathepsin A interaction, and enhanced LAMP2A stability; tmem106bb KO or TMEM106B knockdown caused LAMP2A degradation and impairment of chaperone-mediated autophagy (CMA). Knockdown of lamp2a caused similar phenotypes to that in tmem106bb-/- zebrafish, and overexpression of lamp2a rescued the impaired phenotypes of HSPCs in tmem106bb-/- embryos. These results uncover a novel molecular mechanism for the maintenance of HSPC proliferation and differentiation through stabilizing LAMP2A via TMEM106B-LAMP2A interaction.

Regulation of MicroRNAs After Spinal Cord Injury in Adult Zebrafish.

Spinal cord injury (SCI) is a central nerve injury that often leads to loss of motor and sensory functions at or below the level of the injury. Zebrafish have a strong ability to repair after SCI, but the role of microRNAs (miRNAs) after SCI remains unclear. Locomotor behavior analysis showed that adult zebrafish recovered about 30% of their motor ability at 2 weeks and 55% at 3 weeks after SCI, reflecting their strong ability to repair SCI. Through miRNA sequencing, mRNA sequencing, RT-qPCR experiment verification, and bioinformatics predictive analysis, the key miRNAs and related genes in the repair of SCI were screened. A total of 38 miRNAs were significantly different, the top ten miRNAs were verified by RT-qPCR. The prediction target genes were verified by the mRNAs sequencing results at the same time point. Finally, 182 target genes were identified as likely to be networked regulated by the 38 different miRNAs. GO and KEGG enrichment analysis found that miRNAs targeted gene regulation of many key pathways, such as membrane tissue transport, ribosome function, lipid binding, and peroxidase activity. The PPI network analysis showed that miRNAs were involved in SCI repair through complex network regulation, among which dre-miR-21 may enhance cell reversibility through nop56, and that dre-miR-125c regulates axon growth through kpnb1 to repair SCI.

Homoharringtonine may help improve the outcomes of venetoclax and azacitidine in AML1-ETO positive acute myeloid leukemia.

PURPOSE: T(8;21)(q22;q22.1)/AML1-ETO positive acute myeloid leukemia (AE-AML) is sensitive to conventional chemotherapy with a favorable prognosis. However, recent small case reports suggest the limited effectiveness of venetoclax (VEN) and hypomethylating agents (HMA) in treating AE-AML. The aim of this retrospective study was to evaluate the effectiveness of VEN plus AZA (VA) in AE-AML and explore whether adding homoharringtonine (HHT) to VA (VAH) could improve the response. METHODS: Patients who received VEN plus AZA and HHT (VAH) or VEN plus AZA (VA) regimens were included in this retrospective study. The endpoints of this study were to evaluate the rate of composite complete remission (CRc), measurable residual disease (MRD), event-free survival (EFS), overall survival (OS), and relapse between VAH and VA groups. RESULTS: A total of 32 AE-AML patients who underwent VA or VAH treatments (newly diagnosed with VA, ND-VA, n = 8; relapsed/refractory with VA, R/R-VA, n = 10; relapsed/refractory with VAH, R/R-VAH, n = 14) were included. The CR (complete remission) /CRi (CR with incomplete count recovery) rate of ND-VA, R/R-VA and R/R-VAH were 25%, 10%, and 64.3%, respectively. Measurable residual disease (MRD) negative was observed in 66.7% of R/R-VAH and none of VA-R/R patients. Co-occurring methylation mutations are associated with poor outcomes with VA but exhibit a more favorable response with VAH treatment. Additionally, patients with c-kit mutation presented inferior outcomes with both VEN-based regimens. All regimens were tolerated well by all patients. CONCLUSION: Our data confirmed the poor response of VA in AE-AML, whether used as frontline or salvage therapy. Adding HHT to VA may improve outcomes and enhance the efficacy of VEN in this population.

Flexible cellulose nanofiber aerogel with enhanced porous structure and its applications in copper(II) removal.

In order to achieve an aerogel with both rigid pore structures and desired flexibility, stiff carboxyl-functionalized cellulose nanofiber (CNFs) were introduced into a flexible polyvinyl alcohol-polyethyleneimine (PVA-PEI) crosslinking network, with 4-formylphenylboronic acid (4FPBA) bridging within the PVA-PEI network to enable dynamic boroxine and imine bond formation. The strong covalent bonds and hydrogen connections between CNF and the crosslinking network enhanced the wet stability of the aerogel while also contributed to its thermal stability. Importantly, the harmonious coordination between the stiff CNF and the flexible polymer chains not only facilitated aerogel flexibility but also enhanced its increased specific surface area by improving pore structure. Moreover, the inclusion of CNF enhanced the adsorption capacity of the aerogel, rendering it effective for removing heavy metal ions. The specific surface area and adsorption capacity for copper ions of the aerogel increased significantly with a 3 wt% addition CNF suspension, reaching 19.74 m2 g-1 and 60.28 mg g-1, respectively. These values represent a remarkable increase of 590.21 % and 213.96 %, respectively, compared to the blank aerogel. The CNF-enhanced aerogel in this study, characterized by its well-defined pore structures, and desired flexibility, demonstrates versatile applicability across multiple domains, including environmental protection, thermal insulation, electrode fabrication, and beyond.

Polydopamine-Anchored Cellulose Nanofiber Flexible Aerogel with High Charge Transfer as a Substrate for Conductive Materials.

In order to obtain a flexible aerogel substrate for conductive materials used in the electrode, polydopamine-anchored cellulose nanofiber (PDA@CNF) was introduced into a polyethylene imine-poly(vinyl alcohol) (PEI-PVA) cross-linking network which used 4-formylphenylboronic acid (4FPBA) as bridge. The incorporation of rigid CNF as a structural scaffold effectively improved the pore architecture of the aerogel, potentially providing substantial advantages for the infiltration and deposition of conductive materials. Additionally, the outstanding stability and flexibility exhibited by the aerogel in aqueous solutions suggest its significant potential for applications in flexible electrodes. Furthermore, electrochemical experiments showed that the rapid pathway formed between PDA and PEI could enhance the charge-transfer rate within the aerogel substrate. It is anticipated that such an enhancement would significantly benefit the electrochemical attributes of the electrode. Inspired by mussels, our introduced PDA-anchored rigid CNF into flexible polymer networks to fabricate aerogel substrates for electrode materials. This study would contribute to the development and utilization of flexible electrodes while reducing carbon footprint in energy production and conversion processes.

Establishment and evaluation of on-chip intestinal barrier biosystems based on microfluidic techniques.

As a booming engineering technology, the microfluidic chip has been widely applied for replicating the complexity of human intestinal micro-physiological ecosystems in vitro. Biosensors, 3D imaging, and multi-omics have been applied to engineer more sophisticated intestinal barrier-on-chip platforms, allowing the improved monitoring of physiological processes and enhancing chip performance. In this review, we report cutting-edge advances in the microfluidic techniques applied for the establishment and evaluation of intestinal barrier platforms. We discuss different design principles and microfabrication strategies for the establishment of microfluidic gut barrier models in vitro. Further, we comprehensively cover the complex cell types (e.g., epithelium, intestinal organoids, endothelium, microbes, and immune cells) and controllable extracellular microenvironment parameters (e.g., oxygen gradient, peristalsis, bioflow, and gut-organ axis) used to recapitulate the main structural and functional complexity of gut barriers. We also present the current multidisciplinary technologies and indicators used for evaluating the morphological structure and barrier integrity of established gut barrier models in vitro. Finally, we highlight the challenges and future perspectives for accelerating the broader applications of these platforms in disease simulation, drug development, and personalized medicine. Hence, this review provides a comprehensive guide for the development and evaluation of microfluidic-based gut barrier platforms.

Dynamic evolution of bone marrow adipocyte in B cell acute lymphoblastic leukemia: insights from diagnosis to post-chemotherapy.

Adipocyte is a unique and versatile component of bone marrow microenvironment (BMM). However, the dynamic evolution of Bone Marrow (BM) adipocytes from the diagnosis of B cell Acute Lymphoblastic Leukemia (B-ALL) to the post-treatment state, and how they affect the progression of leukemia, remains inadequately explicated. Primary patient-derived xenograft models (PDXs) and stromal cell co-culture system are employed in this study. We show that the dynamic evolution of BM adipocytes from initial diagnosis of B-ALL to the post-chemotherapy phase, transitioning from cellular depletion in the initial leukemia niche to a fully restored state upon remission. Increased BM adipocytes retards engraftment of B-ALL cells in PDX models and inhibits cells growth of B-ALL in vitro. Mechanistically, the proliferation arrest of B-ALL cells in the context of adipocytes-enrichment niche, might attribute to the presence of adiponectin secreted by adipocytes themselves and the absence of cytokines secreted by mesenchymal stem cell (MSCs). In summary, our findings offer a novel perspective for further in-depth understanding of the dynamic balance between BMM and B-ALL.

Macroscopic and Microscopic Investigation of Gypsum Slag Cement-Stabilized Recycled Aggregate Base Layers.

The purpose of this study is to investigate the macro and micro properties of stabilized recycled aggregate base layers using gypsum slag cement (GSC) and compare them with ordinary Portland cement (OPC). To achieve this, four levels of recycled aggregate content (0%, 50%, 60%, 70%) and three levels of binder materials (3.5%, 4.5%, 5.5%) were designed, where the binding materials included OPC and GSC. When GSC is used as the binding material with 0% recycled content, two scenarios for the ratio of slag to activator are considered: 4:1 and 4:2. For recycled content of 50%, 60%, and 70%, only the 4:1 ratio is considered. The macro-mechanical properties of the composite material were studied through compaction tests, unconfined compressive strength tests, and indirect tensile strength tests. Microscopic properties were investigated through X-ray diffraction (XRD) and scanning electron microscopy (SEM). Macroscopic test results indicate that, at an equal binder content, GSC exhibits a higher moisture content and maximum dry density compared to OPC. Moreover, the unconfined compressive strength and indirect tensile strength of GSC are higher than those of OPC. Microscopic test results reveal that the hydration products of both binding materials are essentially similar; however, under identical curing conditions, the hydration products of GSC are more abundant than those of OPC.

Impact of measurable residual disease in combination with CD19 on postremission therapy choices for adult t(8;21) acute myeloid leukemia in first complete remission.

BACKGROUND: The post-remission therapy (PRT) choices for adult t(8;21) acute myeloid leukemia (AML) in first complete remission (CR1) need to be further explored. AIMS: We aimed to investigate the impact of measurable residual disease (MRD) combined with CD19 on PRT choices for adult t(8;21) AML in CR1. METHODS: A total of 150 t(8;21) AML patients were enrolled, including 67 underwent chemotherapy (CMT) and 83 allogeneic hematopoietic stem cell transplantation (allo-SCT) as PRT in CR1. Subgroup analyses were performed according to MRD level after three cycles of chemotherapy combined with CD19 expression. RESULTS: Multivariate analysis indicated MRDhigh after three courses of treatment (HR, 0.14 [95% CI, 0.03-0.66]; p = 0.013) and CD19 negativity (HR, 0.14 [95% CI, 0.02-0.96]; p = 0.045) were risk factors for relapse, while allo-SCT was protective factor for relapse (HR, 0.34 [95% CI, 0.15-0.75]; p = 0.008). Grouped by MRD after three courses of chemotherapy, allo-SCT had lower CIR (p < 0.001) and better OS (p = 0.003) than CMT for MRDhigh patients, CMT showed a higher CIR (35.99% vs. 15.34%, p = 0.100) but comparable OS (p = 0.588) than allo-SCT for MRDlow patients. Grouped by CD19 expression, allo-SCT demonstrated lower CIR (p < 0.001) and better OS (p = 0.002) than CMT for CD19- patients. CMT had a higher CIR (41.37% vs. 10.48%, p = 0.007) but comparable OS (p = 0.147) than allo-SCT for CD19+ patients. Grouped by MRD combined with CD19, MRDhigh /CD19+ subsets were identified out of CD19+ patients benefiting from allo-SCT with lower CIR (p = 0.002) and superior OS (p = 0.020) than CMT. CMT preserved comparable CIR (p = 0.939) and OS (p = 0.658) with allo-SCT for MRDlow /CD19+ patients. MRDlow /CD19- subsets were also identified from MRDlow patients requiring allo-SCT with lower CIR (p < 0.001) and superior OS (p = 0.008) than CMT. Allo-SCT maintained lower CIR (p < 0.001) and superior OS (p = 0.008) than CMT for MRDhigh /CD19- patients. CONCLUSIONS: MRD combined with CD19 might optimize PRT choices for adult t(8;21) AML patients in CR1.

Sorafenib plus triplet therapy with venetoclax, azacitidine and homoharringtonine for refractory/relapsed acute myeloid leukemia with FLT3-ITD: A multicenter phase 2 study.

BACKGROUND: Patients with relapsed or refractory acute myeloid leukemia (R/R AML) and FLT3-internal tandem duplication (FLT3-ITD) respond infrequently to salvage chemotherapy. OBJECTIVE: To investigate the efficacy of sorafenib plus triplet therapy with venetoclax, azacitidine, and homoharringtonine (VAH) as a salvage therapy in this population. METHODS: This multicenter, single-arm, phase 2 study was conducted at 12 hospitals across China. Eligible patients had R/R AML with FLT3-ITD (aged 18-65 years) who were treated with VAH. The primary endpoint was composite complete remission (CRc) after two cycles. Secondary outcomes included the overall response rate (ORR), safety, and survival. RESULTS: Between July 9, 2020, and March 19, 2022, 58 patients were assessed for eligibility, 51 of whom were enrolled. The median patient age was 47 years (interquartile range [IQR] 31-57). CRc was 76.5% with ORR of 82.4%. At a median follow-up of 17.7 months (IQR, 8.7-24.7), the median duration of CRc was not reached (NR), overall survival was 18.1 months (95% confidence interval [CI], 11.8-NR) and event-free survival was 11.4 months (95% CI, 5.6-NR). Grade 3 or 4 adverse events occurring in ≥10% of patients included neutropenia in 47 (92.2%), thrombocytopenia in 41 (80.4%), anemia in 35 (68.6%), febrile neutropenia in 29 (56.9%), pneumonia in 13 (25.5%), and sepsis in 6 (11.8%) patients. Treatment-related death occurred in two (3.9%) patients. CONCLUSIONS: The sorafenib plus VAH regimen was well tolerated and highly active against R/R AML with FLT3-ITD. This regimen may be a suitable therapeutic option for this population, but larger population trials are needed to be explored. TRIAL REGISTRATION: Clinical Trials Registry: NCT04424147.

Atomistically informed hierarchical modeling for revisiting the constituent structures from heredity and nano-micro mechanics of sheath-core carbon fiber.

To better understand the heterogeneous anisotropic nanocomposite features and provide reliable underlying constitutive parameters of carbon fiber for continuum-level simulations, hierarchical modeling approaches combining quantum chemistry, molecular dynamics, numerical and analytical micromechanics are employed for studying the structure-performance relationships of the precursor-inherited sheath-core carbon fiber layers. A robust debonding force field is derived from energy matching protocols, including bond dissociation enthalpy calculations and rigid-constraint potential energy surface scan. Logistic long range bond stretching curves with exponential parameters and shifted force vdW curves are designed to diminish energy perturbations. The pseudo-crystalline microstructure is proposed and validated using virtual wide angle X-ray diffraction patterns and bond-orientational order parameters. The distribution or alignment features of the nanocomposite microstructures are collected from quantum chemical topology analysis and normal vector extractions. Non-equilibrium tensile loading simulation predicts the decomposed strain energy contributions, principal-axis modulus, strength limit, localized stress, and fracture morphologies of the model. Finally, an atomistically-informed stiffness prediction model combining numerical homogenization and analytical self-consistent Eshelby-Mori-Tanaka-type effective mean field micromechanics theory is proposed, giving a successful estimation of the overall stiffness matrix of the sheath-core carbon fiber system. The hierarchical models in combination with the carbonization reaction template will help in providing efficient and feasible schemes for the synergistic process-performance control of distinct types of carbon fiber.

Where is VALDO? VAscular Lesions Detection and segmentatiOn challenge at MICCAI 2021.

Imaging markers of cerebral small vessel disease provide valuable information on brain health, but their manual assessment is time-consuming and hampered by substantial intra- and interrater variability. Automated rating may benefit biomedical research, as well as clinical assessment, but diagnostic reliability of existing algorithms is unknown. Here, we present the results of the VAscular Lesions DetectiOn and Segmentation (Where is VALDO?) challenge that was run as a satellite event at the international conference on Medical Image Computing and Computer Aided Intervention (MICCAI) 2021. This challenge aimed to promote the development of methods for automated detection and segmentation of small and sparse imaging markers of cerebral small vessel disease, namely enlarged perivascular spaces (EPVS) (Task 1), cerebral microbleeds (Task 2) and lacunes of presumed vascular origin (Task 3) while leveraging weak and noisy labels. Overall, 12 teams participated in the challenge proposing solutions for one or more tasks (4 for Task 1-EPVS, 9 for Task 2-Microbleeds and 6 for Task 3-Lacunes). Multi-cohort data was used in both training and evaluation. Results showed a large variability in performance both across teams and across tasks, with promising results notably for Task 1-EPVS and Task 2-Microbleeds and not practically useful results yet for Task 3-Lacunes. It also highlighted the performance inconsistency across cases that may deter use at an individual level, while still proving useful at a population level.

Changing epidemiology, microbiology and mortality of bloodstream infections in patients with haematological malignancies before and during SARS-CoV-2 pandemic: a retrospective cohort study.

OBJECTIVE: This study was to explore the changes in bacterial bloodstream infection (BSI) in patients with haematological malignancies (HMs) before and during SARS-CoV-2 pandemic. DESIGN: Retrospective cohort study between 2018 and 2021. SETTING: The largest haematological centre in southern China. RESULTS: A total of 599 episodes of BSI occurring in 22 717 inpatients from January 2018 to December 2021 were analysed. The frequencies of the total, Gram-negative and Gram-positive BSI before and during the pandemic were 2.90% versus 2.35% (p=0.011), 2.49% versus 1.77% (p<0.001) and 0.27% versus 0.44% (p=0.027), respectively. The main isolates from Gram-negative or Gram-positive BSI and susceptibility profiles also changed. The 30-day mortality caused by BSI was lower during the pandemic (21.1% vs 14.3%, p=0.043). Multivariate analysis revealed that disease status, pulmonary infection and shock were independent predictors of 30-day mortality. CONCLUSION: Our data showed that the incidence of total and Gram-negative organisms BSI decreased, but Gram-positive BSI incidence increased in patients with HMs during the pandemic along with the changes of main isolates and susceptibility profiles. Although the 30-day mortality due to BSI was lower during the pandemic, the new infection prevention strategy should be considered for any future pandemics.

Impact of genetic patterns on sorafenib efficacy in patients with FLT3-ITD acute myeloid leukemia undergoing allogeneic hematopoietic stem cell transplantation: a multi-center, cohort study.

Sorafenib therapy improves overall survival (OS) in patients with FLT3 internal tandem duplication (ITD) acute myeloid leukemia (AML) undergoing allogeneic hematopoietic stem cell transplantation. We explored the efficacy of sorafenib therapy in this population with different concomitant genetic patterns. In this multi-center, cohort study, we enrolled patients with FLT3-ITD AML undergoing allogenic hematopoietic cell transplantation. Patients with sorafenib maintenance post-transplantation for at least four weeks were allocated to the sorafenib group, and otherwise to the control group. Endpoints were OS, disease-free survival, and relapse for the whole cohort and OS for genetic pattern subgroups. Among 613 patients enrolled, 275 were in the sorafenib and 338 the control group. Median follow-up was 36.5 (interquartile range (IQR), 25.2-44.7) months post-transplantation. The 3-year OS post-transplantation was 79.6% (95% confidential interval (CI) 74.8%-84.6%) and 65.2% (95% CI 60.3%-70.6%) (Hazard ratio (HR) 0.50, 95% CI 0.37-0.69; P < 0.0001) in both groups. Sorafenib maintenance post-transplantation improved OS in the favorable (HR 0.33, 95% CI 0.14-0.77; P = 0.011) and adverse (HR 0.56, 95% CI 0.33-0.93; P = 0.026) ELN 2017 risk subgroups. Patients with mutated NPM1, DNMT3A, co-occurring NPM1/DNMT3A, "activated signaling" and "DNA methylation" genes benefited in OS from sorafenib maintenance, while those carrying CEBPA, "tumor suppressors" and "myeloid transcription factors" genes did not. Patients with FLT3-ITDhigh and FLT3-ITDlow AML both benefited in OS from sorafenib maintenance. Our results identify the response of genetic patterns to sorafenib maintenance, providing new viewpoints for the optimal use of sorafenib in FLT3-ITD AML in the transplantation setting.

Sorafenib maintenance after allogeneic haemopoietic stem-cell transplantation in patients with FLT3-ITD acute myeloid leukaemia: long-term follow-up of an open-label, multicentre, randomised, phase 3 trial.

BACKGROUND: Our open-label, multicentre, randomised, phase 3 trial showed that sorafenib maintenance after haematopoietic stem-cell transplantation (HSCT) improved overall survival and reduced relapse for patients with FLT3 internal tandem duplication (FLT3-ITD) acute myeloid leukaemia undergoing allogeneic HSCT. Here, we present a post-hoc analysis on the 5-year follow-up data of this trial. METHODS: This phase 3 trial, done in seven hospitals in China, included patients with FLT3-ITD acute myeloid leukaemia undergoing allogeneic HSCT, who were aged 18-60 years, had an Eastern Cooperative Oncology Group performance status of 0-2, had composite complete remission before and after transplantation, and had haematopoietic recovery within 60 days after transplantation. Patients were randomly assigned (1:1) to receive sorafenib maintenance (400 mg orally twice daily) or non-maintenance (control) at 30-60 days after transplantation. Randomisation was done with permuted blocks (block size four) via an interactive web-based system. Investigators and participants were not masked to group assignment. The primary endpoint was the 1-year cumulative incidence of relapse, which was reported previously. For this updated analysis, the 5-year endpoints were overall survival; cumulative incidence of relapse; non-relapse mortality; leukaemia-free survival; graft-versus-host disease (GVHD)-free, relapse-free survival (GRFS); cumulative incidence of chronic GVHD; and late effects in the intention-to-treat population. The trial is registered with ClinicalTrials.gov, NCT02474290, and is complete. FINDINGS: Between June 20, 2015, and July 21, 2018, 202 patients were randomly assigned to sorafenib maintenance (n=100) or non-maintenance (n=102). Median follow-up was 60·4 months (IQR 16·7-73·3). Extended follow-up showed improved overall survival (72·0% [95% CI 62·1-79·7] vs 55·9% [45·7-64·9]; hazard ratio [HR] 0·55, 95% CI 0·34-0·88; p=0·011), leukaemia-free survival (70·0% [60·0-78·0] vs 49·0% [39·0-58·3]; 0·47, 0·30-0·73; p=0·0007), and GRFS (58·0% [47·7-67·0] vs 39·2% [29·8-48·5]; 0·56, 0·38-0·83; p=0·0030), lower cumulative incidence of relapse (15·0% [8·8-22·7] vs 36·3% [27·0-45·6]; 0·33, 0·18-0·60; p=0·0003), and no increase in non-relapse mortality (15·0% [8·8-22·7] vs 14·7% [8·6-22·3]; 0·79, 0·39-1·62; p=0·98) for patients in the sorafenib group compared with those in the control group. The 5-year cumulative incidence of chronic GVHD (54·0% [43·7-63·2] vs 51·0% [40·8-60·3]; 0·82, 0·56-1·19; p=0·73) did not differ significantly between the two groups and we did not find substantial differences in late effects between the two groups. There were no treatment-related deaths. INTERPRETATION: With extended follow-up, sorafenib maintenance after transplantation is associated with improved long-term survival and reduced relapse rates compared with non-maintenance, further supporting this strategy as a standard of care for patients with FLT3-ITD acute myeloid leukaemia undergoing allogeneic HSCT. FUNDING: None. TRANSLATION: For the Chinese translation of the abstract see Supplementary Materials section.

Insights into the carbonization mechanism of PAN-derived carbon precursor fibers and establishment of a kinetics-driven accelerated reaction template for atomistic simulation.

To better understand the chemistry behind the carbonization process of the polyacrylonitrile (PAN)-based precursor fibers and provide a more authentic virtual counterpart of the process-inherited model for process optimization and rational performance design, we develop arrow-pushing reaction routes for primary exhaust gas product (H2O/H2/HCN/N2/tar vapor) formation and a pragmatic kinetics-driven accelerated reaction template for atomistic simulation of the carbonization process overcoming traditional challenges in time scale discrepancy of the reaction-diffusion system. The results of enthalpy barriers from hybrid first principles calculations validate the rationality and sequence of conjectured reactions during the two-stage carbonization process. Conversion rates of the rate-determining steps under 300 s carbonization are also estimated based on Eyring's transition state theory realizing kinetics equivalency of the reaction extent. Process-control measurements are further demonstrated corresponding to the proposed mechanism. The iterative densified crosslinking scheme specially designed for the surface layer is implanted into the topological reaction molecular dynamics template and a series of highly devisable structural models during the whole evolutionary process from the pre-oxidized fiber to the pristine carbon fiber surface are successfully predicted. The ultimate structure of the model presents excellent similarity in carbon yield and elemental composition with the type II high strength carbon fiber surface.