High sugar-sweetened beverage intake frequency is associated with smoking, irregular meal intake and higher serum uric acid in Taiwanese adolescents.

Types of sugar-sweetened beverages (SSB) can differ greatly between countries, with greater consumption of sweetened tea in Asia. This study aimed to understand changes in SSB consumption by adolescents in Taiwan over 18 years and their association with demographic characteristics and clinical outcome. This study used survey data from the 1993-1996 and 2010-2011 Nutrition and Health Surveys in Taiwan. Participants were high school students aged 13 to 18 years. Data were weighted and analysed using SUDAAN 11.0 and SAS 9.4. Participants were asked about intake frequencies of SSB and were grouped into four different SSB intake groups based on the combination of high or low frequency (including moderate frequency) of intake of sweetened tea and soda/sports/energy drinks. Results indicated over 99 % of teens reported having at least one SSB in the past week. Smoking status was significantly associated with SSB intake types with high tea intake (high tea and low soda (HL) group, OR 7·56, P < 0·001; high tea and high soda (HH) group, OR 9·96, P < 0·001). After adjustment for potential confounders, adolescents in the low tea and high soda (LH) group (ß = 0·05, P = 0·034) had significantly higher mean serum uric acid values. In conclusion, sugary tea remains the SSB of choice for Taiwanese adolescents. Those with a frequent intake of soda/sports/energy drinks had a higher chance of being hyperuricaemic.

Hypertension impairs hippocampus-related adult neurogenesis, CA1 neuron dendritic arborization and long-term memory.

Hypertension is associated with neurodegenerative diseases and cognitive impairment. Several studies using spontaneous hypertensive rats to study the effect of hypertension on memory performance and adult hippocampal neurogenesis have reached inconsistent conclusions. The contradictory findings may be related to the genetic variability of spontaneous hypertensive rats due to the conventional breeding practices. The objective of this study is to examine the effect of hypertension on hippocampal structure and function in isogenic mice. Hypertension was induced by the '2 kidneys, 1 clip' method (2K1C) which constricted one of the two renal arteries. The blood pressures of 2K1C mice were higher than the sham group on post-operation day 7 and remained high up to day 28. Mice with 2K1C-induced hypertension had impaired long-term, but not short-term, memory. Dendritic complexity of CA1 neurons and hippocampal neurogenesis were reduced by 2K1C-induced hypertension on post-operation day 28. Furthermore, 2K1C decreased the levels of hippocampal brain-derived neurotrophic factor, while blood vessel density and activation status of astrocytes and microglia were not affected. In conclusion, hypertension impairs hippocampus-associated long-term memory, dendritic arborization and neurogenesis, which may be caused by down-regulation of brain-derived neurotrophic factor signaling pathways.

Photodissociation of gaseous acetyl chloride at 248 nm by time-resolved Fourier-transform infrared spectroscopy: the HCl, CO, and CH2 product channels.

In one-photon dissociation of gaseous acetyl chloride at 248 nm, time-resolved Fourier-transform infrared emission spectroscopy is used to detect the fragments of HCl, CO, and CH(2) in the presence of Ar or O(2). The high-resolution spectra of HCl and CO are analyzed to yield the corresponding internal energy deposition of 8.9 +/- 1.1 and 6.2 +/- 0.9 kcal/mol. The presence of the CH(2) fragment is verified by detecting the CO(2) product resulting from the reaction of CH(2) and the added O(2). The probability of the HCl formation via a hot Cl reaction with the precursor is examined to be negligible by performing two experiments, the CH(3)COCl pressure dependence and the measurement of Br(2) with Cl reaction. The HCl elimination channel under the Ar addition is verified to be slowed by 2 orders of magnitude, as compared to the Cl elimination channel. The observed fragments are proposed to dissociate on the hot ground electronic state via collision-induced internal conversion. A two-body dissociation channel is favored leading to HCl and CH(2)CO, followed by secondary dissociation.

A chemical dynamics, kinetics, and theoretical study on the reaction of the cyano radical (CN; X(2)Sigma+) with phenylacetylene (C6H5CCH; X(1)A1).

The chemical reaction dynamics to form o-, m-, and p-cyanophenylacetylene via the neutral-neutral reaction of ground state cyano radicals with phenylacetylene and D(1)-phenylacetylene were investigated in crossed beam experiments; these studies were combined with kinetics measurements of the rate coefficients at temperatures of 123, 200, and 298 K and supplemented by electronic structure calculations. The data suggest that the reaction is initiated by a barrier-less addition of the electrophilic cyano radical to the o-, m-, or p-position of the aromatic ring. The eventually fragmented via atomic hydrogen elimination to form o-, m-, and p-cyanophenylacetylene via tight exit transition states with the hydrogen atom being ejected almost perpendicularly to the molecular plane of the rotating complex. The overall reaction to form o-, m-, and p-cyanophenylacetylene was found to be exoergic by 89 +/- 18 kJ mol(-1) in nice agreement with the calculations. The o-cyanophenylacetylene isomer is of particular relevance as a potential building block to the formation of nitrogen-substituted didehydronaphthalene molecules in analogy to didehydronaphthalene in Titan's aerosol layers--a pathway hitherto neglected by the planetary science modeling community.

Localised heating of tumours utilising injectable magnetic nanoparticles for hyperthermia cancer therapy.

This study reports an investigation of hyperthermia cancer therapy utilising an alternating magnetic field to induce a localised temperature increase on tumours by using injectable magnetic nanoparticles. In-vitro and in-vivo experiments represent the feasibility of hyperthermia cancer therapy. A feedback temperature control system was first developed to keep the nanoparticles at a constant temperature to prevent overheating in the tumours such that a safer and more precise cancer therapy becomes feasible. By using the feedback temperature control system, magnetic nanoparticles can be heated up to the specific constant temperatures, 37, 40, 42, 45, 46 and 47 degrees C, respectively, with a variation less than 0.2 degrees C. With this approach, the in-vitro survival rate of tumour cells at different temperatures can be systematically explored. It was experimentally found that the survival rate of cancer cells can be greatly reduced while CT-26 cancer cells were heated above 45 degrees C. Besides, localised temperatures increase as high as 59.5 degrees C can be successfully generated in rat livers by using the proposed method. Finally, complete regression of tumour was achieved. The developed method used injectable magnetic nanoparticles and may provide a promising approach for hyperthermia cancer therapy.

Insulin-like growth factor binding protein-5 (IGFBP-5) suppresses the tumourigenesis of head and neck squamous cell carcinoma.

Head and neck squamous cell carcinoma (HNSCC) is a global malignancy. The insulin-like growth factor (IGF) signalling axis plays a critical role in tumourigenesis. This study defined the clinical and functional roles of insulin-like growth factor binding protein-5 (IGFBP-5) in HNSCC. Down-regulation of IGFBP-5 mRNA expression was found during the progression from pre-cancer to HNSCC. The down-regulation in HNSCC was associated with a higher propensity to nodal metastasis. SAS and OECM-1 are HNSCC cells that do, or do not, express IGFBP-5, respectively. Recombinant IGFBP-5 reduced the proliferation of OECM-1 cells and this was exerted mainly through blockade of the IGF pathways. Either IGFBP-5 or IGF-I treatment alone promoted OECM-1 migration, but a combination of treatments generated antagonistic effects. Overexpression of IGFBP-5 reduced the proliferation and anchorage-independent growth of both OECM-1 and SAS cells. Conversely, knockdown of IGFBP-5 expression significantly induced the proliferation and anchorage-independent growth of SAS cells. It also induced the growth of xenografted SAS tumours. SAS transfectants that expressed mutant or truncated IGFBP-5, which lack IGF binding activity, exhibited significantly lower anchorage-independent growth than vector control. This suggests that IGFBP-5 possesses an IGF-independent suppressor function. The suppressive effects of IGFBP-5 on the tumourigenesis of HNSCC might be invaluable to future neoplastic intervention.

Temporal differences in relative phasing of gait initiation and first step length in patients with cervical and lumbosacral spinal cord injuries.

STUDY DESIGN: Comparison group design. OBJECTIVE: To compare the temporal distance factors during gait initiation between patients with incomplete cervical spinal cord injury, incomplete lumbosacral spinal lesion, and unimpaired control adults. SETTING: Human performance and movement analysis laboratory, Taiwan. PARTICIPANTS: Five patients with an incomplete cervical spinal cord injury (Group 1), five patients with an incomplete lumbosacral spinal lesion (Group 2) and nine unimpaired control adults (Group 3). METHODS: Subjects underwent a three-dimensional gait analysis. The total gait initiation period, reaction time, each relative phasing of gait initiation and the length of the first step were identified by using the kinematic measurement system. MAIN OUTCOME MEASURES: The total gait initiation period (start of the auditory cue for gait initiation to heel-strike of the first swing leg); each relative phasing of gait initiation indicated that the duration of the preparatory phase (start of auditory cue for gait initiation to heel-off of the first swing leg), the duration of the push-up phase (heel-off to toe-off of the first swing leg), and the duration of the single-stance phase (toe-off to heel-strike of the first swing leg) established by the total gait initiation period; and the length of the first step. RESULTS: The gait initiation period was greater in Groups 1 and 2 than that of Group 3 (P<0.05). Each relative phasing including the duration of the preparatory phase, the push-up phase, and the swing phase relative to the total gait initiation period, did not differ among Groups 1-3 (P>0.05). The length of the first step, measured while the nonpreferred leg stepped first in Groups 1 and 2, was shorter than that of Group 3 (P<0.05). CONCLUSIONS: Patients with incomplete cervical spinal cord injuries or lumbosacral spinal lesions took more time in gait initiation than unimpaired control adults. The first step length also reduced in these patients while the nonpreferred leg stepped first, as compared to unimpaired control adults. The data indicated that centrally programmed gait initiation might be preserved in ASIA-D spinal patients who, in this study, executed gait initiation with varying temporal distance strategies to compensate for peripheral impairments, as compared to unimpaired control adults.

MEG localization of rolandic spikes with respect to SI and SII cortices in benign rolandic epilepsy.

The purpose of this study was to study the relationship between interictal spike sources and somatosensory cortices in benign rolandic epilepsy of childhood (BREC) using a whole-scalp neuromagnetometer. We recorded spontaneous magnetoencephalography (MEG) and EEG signals and cortical somatosensory-evoked magnetic fields (SEFs) to electric stimulation of the median nerve in 9 children with BREC. Interictal rolandic discharges (RDs) and SEFs were analyzed by equivalent current dipole (ECD) modeling. Based on the orientation and locations of corresponding ECDs, we compared generators of RDs with primary (SI) and second somatosensory cortices (SII). Our results showed that RDs and SII responses had similar ECD orientation on the magnetic field maps. The ECDs of RDs were localized 15.3 +/- 1.9 and 12.2 +/- 2.8 mm anterior to SI and SII, respectively. The spatial distance on average from the location of RDs to SII (21.9 +/- 1.6 mm) cortex was significantly shorter than to SI cortex (29.7 +/- 1.7 mm) (P<0.01, Wilcoxon signed-rank test). In conclusion, the cortical generators for RDs in patients with BREC are localized in the precentral motor cortex, closer to hand SII than to SI cortex.

Magnetoencephalographic yield of interictal spikes in temporal lobe epilepsy. Comparison with scalp EEG recordings.

To compare magnetoencephalography (MEG) with scalp electroencephalography (EEG) in the detection of interictal spikes in temporal lobe epilepsy (TLE), we simultaneously recorded MEG and scalp EEG with a whole-scalp neuromagnetometer in 46 TLE patients. We visually searched interictal spikes on MEG and EEG channels and classified them into three types according to their presentation on MEG alone (M-spikes), EEG alone (E-spikes), or concomitantly on both modalities (M/E-spikes). The M-spikes and M/E-spikes were localized with MEG equivalent current dipole modeling. We analyzed the relative contribution of MEG and EEG in the overall yield of spike detection and also compared M-spikes with M/E-spikes in terms of dipole locations and strengths. During the 30- to 40-min MEG recordings, interictal spikes were obtained in 36 (78.3%) of the 46 patients. Among the 36 patients, most spikes were M/E-spikes (68.3%), some were M-spikes (22.1%), and some were E-spikes (9.7%). In comparison with EEG, MEG gave better spike yield in patients with lateral TLE. Sources of M/E- and M-spikes were situated in the same anatomical regions, whereas the average dipole strength was larger for M/E- than M-spikes. In conclusion, some interictal spikes appeared selectively on either MEG or EEG channels in TLE patients although more spikes were simultaneously identified on both modalities. Thus, simultaneous MEG and EEG recordings help to enhance spike detection. Identification of M-spikes would offer important localization of irritative foci, especially in patients with lateral TLE.

Lateralizing value of early head turning and ictal dystonia in temporal lobe seizures: a video-EEG study.

To investigate early head turning, we retrospectively studied videotapes of 262 seizures from 82 patients who were seizure free after temporal lobectomy. Early head movements were arbitrarily classified into non-tonic turning, tonic turning, and absence of turning. Among the 222 seizures which showed early head turning, 168 (75.7%) had non-tonic turning and 54 (24.3%) had tonic turning. The direction of the first head turning was ipsilateral to the epileptogenic foci in 132 (78.6%) seizures with non-tonic turning and in 35 (64.8%) seizures showing tonic head turning. The proportion of seizures with turning towards the ipsilateral side in the presence of tonic and non-tonic head turning were significantly different (P= 0.04). Seventy-four seizures (28.2%) evolved to secondary generalization, more frequently found in seizures with early head turning (P= 0.0015) and especially those showing tonic turning (P< 0.0001). The direction of head turning immediately preceding secondary generalization was contralateral to the lesion side in 53 seizures (82.8%). Dystonic upper limb posturing occurred in 86 seizures (32.8%), exclusively contralateral to the seizure focus, whereas 65 (75.6%) were associated with initial head turning ipsilateral to the focus. In summary, temporal lobe seizures with tonic head turning tends to secondarily generalize and the direction of head turning before secondarily generalized was contralateral to the seizure foci. Earlier in the seizures the direction of non-tonic head turning tends to be towards the epileptogenic hemisphere. In addition, dystonic posturing of the extremities is a significant lateralizing sign to the contralateral hemisphere in temporal lobe seizures.

Effects of surface treatments on bond strength of glass-infiltrated ceramic.

The purpose of this study was to evaluate the effects of various surface treatments on the bond strength at the In-Ceram/resin composite interface. Ninety-eight In-Ceram specimens were divided into seven groups and exposed to various surface treatments as follows: (A) control (B) saliva contamination (C) saliva contamination plus aluminum oxide sandblasting (D) glove powder contamination (E) glove powder contamination plus aluminum oxide sandblasting (F) rough aluminum oxide sandblasting and (G) excess glass infiltration. A resin composite cylinder was cemented to each In-Ceram specimen with Panavia 21 resin luting cement. Half of the cemented specimens in each group were stored in water for 24 h, and the other half were stored in water for 2 weeks and then were thermo-cycled for 2000 cycles. Shear bond strengths (SBS) of seven specimens in each subgroup were determined and analysed using analysis of variance (ANOVA) and Tukey HSD test as well as Student's t-test. Scanning electronic microscopy was used to identify the type of bond failure. Shear bond strength was significantly decreased by saliva and glove powder contaminations (P < 0.05). Sandblasting treatment did not improve the saliva-contaminated specimens. However, the glove powder plus sandblasting group showed no significant difference in SBS compared with the control group. There was no significant difference in SBS between the excess glass-infiltrating group and the control group. The SBS was significantly decreased by rough aluminum oxide sandblasting (P < 0.05). The SBS values of groups without thermocycling were significantly greater than those of groups with thermocycling (P < 0.05). There were no significant differences among SBS values of the seven groups with thermocycling. Combined cohesive and adhesive bond failures were seen in every group. Various surface treatments or contaminants may significantly influence the bond strength of In-Ceram restorative in clinical use.

Antiepileptic drug withdrawal in patients with temporal lobe epilepsy undergoing presurgical video-EEG monitoring.

PURPOSE: To investigate antiepileptic drug (AED) withdrawal during video-EEG monitoring in adult patients with temporal lobe epilepsy (TLE). METHODS: Between 1995 and 1997, 102 consecutive patients with refractory TLE were admitted to the epilepsy monitoring unit for presurgical evaluation. Patients were monitored with ongoing AEDs being rapidly decreased and discontinued in 4-6 days. The monitoring was continued until sufficient numbers of seizures were recorded. Serum AED levels were checked at admission and after the first complex partial seizure (CPS). RESULTS: In all, 89 patients had 429 CPSs (mean, 4.8 per patient), including 156 (36.4%) secondarily generalized. A mean of 153.8 h (16-451 h) was required for completing the monitoring in each patient. Forty-three (48.3%) patients experienced seizure clusters, and eight (9.0%) had generalized seizures that had never occurred or had been absent for years. However, none evolved to status epilepticus. Carbamazepine was the most commonly used AED in 71.9% of patients, followed by valproate and phenytoin. When the first CPS occurred, mean 77.2 h since the beginning of the monitoring, serum levels of these three AEDs were mostly subtherapeutic rather than minimal. CONCLUSIONS: Acute AED withdrawal effectively provoked seizures in TLE patients undergoing presurgical video-EEG monitoring. However, nearly 50% of patients had seizure clusters or secondarily generalized seizures. Serum AED levels were mostly subtherapeutic when the first CPS occurred.

Localization of A-type K+ channel subunit Kv4.2 in rat brain.

Kv4.2, a voltage-gated K+ (Kv) channel subunit, has been suggested to be the key component of the subthreshold A-type K+ currents (I(SA)s) recorded from the specific subcellular compartments of certain CNS neurons. To correlate Kv4.2 localization with the I(SA)s detected, immunohistochemistry will be useful. Although the Kv4.2 immunostaining pattern in the hippocampus and cerebellum has been reported, the Kv4.2 antibody used was not specific. Furthermore, Kv4.2 localization in other brain regions remains unclear. In this report, we first demonstrated the specificity of a new Kv4.2 antibody, and then used it to examine Kv4.2 localization throughout adult rat brain by immunohistochemistry. At the cellular level, Kv4.2 was found in neurons but not glias. At the subcellular level, Kv4.2 was localized in the somatodendritic compartment of most neurons examined. Nevertheless, our preliminary data indicated that Kv4.2 might be also present in the axon/terminal compartment. At the functional level, our data indicates that Kv4.2 localization and I(SA) correlate quite well in some CNS neurons, supporting that Kv4.2 is the key component of some I(SA)s recorded in vivo.

Thermo-debonding mechanisms in dentin bonding systems using finite element analysis.

The finite element method (FEM) has been extensively used in evaluating the interfacial status of biomaterials. We used FEM to explore the microscopic debonding mechanism of the dentin/hybrid layer/resin adhesive interface. The stress status of the local material was used as an index to judge whether the adhesive interface would develop a debonding mechanism. To generate the local stress concentration, the thermal boundary condition was applied to the model which has the phenomenon of the coefficient of thermal expansion (CTE) mismatch. The thermal boundary condition was used to emulute a previous study conducted with a laser thermoacoustic technique (LTAT). The materials, Scotchbond MP, Optibond, and Tenure bonding systems, used in the previous experiment were also tested in this study. The results show that interfacial debonding in the finite element model occurred through the hybrid layer for both the Scotchbond MP and Tenure systems, as well as within the adhesive layer itself for the Optibond system. These findings are compatible with observations by SEM obtained by LTAT. Another transformed model was created to test the "elastic cavity wall" concept. The result also confirms the importance of the elastic cavity wall concept. These compatible results between FEM and LTAT indicate that FEM can be a very useful supplement to thermoacoustic testing.

Influence of silanization and filler fraction on aged dental composites.

The effect of silanization and filler fraction on the mechanical properties of aged dental composites was investigated. Experimental composites (75/25 Bis-GMA/TEGDMA resin reinforced with 0, 12.6, 30.0, and 56.5 vol% 8 microm silanized/unsilanized BaSiO6) were fabricated into 4.7 mm diameter x 2.2 mm thick discs and 3.5 mm diameter x 7.3 mm thick discs for diametral tensile and compressive tests, respectively. The effect of immersion in 75% ethanol at 37 degrees C for 0-30 days on the diametral tensile strength (DTS) and compressive strength (CS) of the samples was evaluated and analysed by ANOVA and Tukey LSD test. The fracture interface between filler and resin matrix was then examined by scanning electron microscope. Results and subsequent statistical evidence from DTS (18.6+/-7.6 MPa, silanized versus 11.7+/-2.6 MPa, unsilanized) and CS (85.1+/-29.7 MPa, silanized versus 56.0+/-11.3 MPa, unsilanized) strongly implies that silanization may greatly enhance the mechanical properties of the resin composites. Furthermore, it also shows that both DTS and CS increased proportionally as the filler fraction of the composites increased. However, in the unsilanized groups, DTS decreased (up to 40%) as the filler fraction increased, and CS showed no relevance to the filler fraction at all. As for the influence of aging, it was found that both DTS and CS showed a significant decrease after immersion in 75% ethanol, and silanization heavily correlated with the filler fraction of aged-resin composites. Microscopic examination of the fractured samples showed that failure primarily occurred within the resin matrix per se for silanized composites and adjacent to the filler particles for unsilanized composites. All the evidence points to the conclusion that mechanical properties of aged-resin composites can be greatly influenced by silanization and the filler fraction.

Acoustic emissions generated in aged dental composites using a laser thermoacoustic technique.

The heating up of dental composites by laser will produce acoustic emissions (AEs) that may be related to fracture mechanisms in the composites. It has been proved that the mechanical properties of dental composites are affected by storage in food simulating liquids, i.e. 75% ethanol, which has a solubility parameter approximating to that of bisphenol glycidyl dimethacrylate (BisGMA) resin. A new method was innovated to evaluate the laser-induced AEs in dental composites aged by 75% ethanol solution. Model systems (50/50 BisGMA/TEGDMA resin filled with 0% and 75 wt.% 5-10 microm silanized BaSiO6) as well as three commercial composites (Marathon One, Z100 and Herculite XRV) were used in this study. Nine samples acting as the control group were tested to establish the correlation of AEs to laser power. The effect of ageing by immersion in 75% ethanol on AEs and diametral tensile strength (DTS) was then evaluated. A quasi-continuous wave CO2 laser was used to heat up the composites. AEs of frequency 100-200 kHz were collected, filtered, recorded and processed using a 4610 Smart Acoustic Monitor. Burst patterns, which formally were assumed to be correlated to fracture mechanisms, were also identified from the data obtained at laser power > or = 5 W for commercial composites and > or = 4 W for model systems. Higher laser powers cause the AE to increase for all composites except unfilled model resin. AEs as a function of power for all aged systems were flat (< 100 events) below 4 W. Emissions then rose sharply to > 1000 events at 7.1 W. Statistically significant differences were found between the AEs obtained at 5 W (commercial composites) and those at 4.3 W (model systems) for material systems and storage times. Marathon One was less affected by the laser and an abrupt change in AE was found between days 0 and 7 of storage for all commercial composites. The AE value from the unfilled model resin was found to be significantly different from that of the model composites. However, they showed an increase in AEs with length of storage time, which was inversely associated with the decreased tendency of their immersed DTS values. Laser-induced AEs may be a valuable adjunct to conventional mechanical testing.

Fluoride ion diffusion from a glass-ionomer cement.

The aims of this study were to observe the release of fluoride ions (F-) from GC-Fuji Lining-LC(R) glass-ionomer cement, to assess the diffusion process, and to measure fluoride diffusivity (D) in the set cement. Specimens of various dimensions and shapes, ranging from discs to cylindrical rods, were fabricated for both open and embedded modes of testing. In the open mode studies, specimens with different surface to volume ratios were selected and immersed in 37 degrees C distilled water. In the embedded mode studies, only one diametral surface of the rod-shaped specimens of different lengths and diameters was exposed. F- concentration was measured using a fluoride electrode. The storage solution was analysed at predetermined intervals hourly, daily, and weekly (up to 10 weeks). Immediately after each sampling, the old storage solution was discarded and replaced with new distilled water. F- release from the set cements was detectable (0.4-3.8 ppm, varied with sample geometry), even after a 10-week sampling interval. F- release was greater in ground set cements (0.37 ppm/mg powder) than in control samples of unmixed powder (0.01 ppm/mg powder) immersed for 1 h. Two mechanisms for F- release were proposed. One was short-term and involved rapid dissolution from the cement surface. The other was more gradual and resulted in the sustained diffusion of ions through the bulk cement, which can be modelled by applying a mathematical technique known as separation of variables to Fick's Second Law of Diffusion. The mean D of F- in embedded set cements of glass-ionomer was (1.4+/-0.5)x10-11 cm2/s, with higher apparent D observed in open mode samples [(7.6+/-1.4)x10-11 cm2/s].

Laser-induced acoustic emissions in experimental dental composites.

A laser thermoacoustic technique was innovated to evaluate laser-induced acoustic emissions (AEs) in experimental dental composites aged with 75% ethanol solution. Experimental composite systems of 75/25 BisGMA/TEGDMA resin filled with 0, 12.6, 30.0, and 56.5 vol% of 8-microm silanized and unsilanized BaSiO6 were analyzed. The sample size was 4.65 mm (diameter) x 0.5 mm (thick). Aging effects of immersing in 75% ethanol for up to 14 h on AEs were then evaluated. A continuous-wave CO2 laser was used to heat the samples. Acoustic emissions were collected as a function of filler fraction, laser power, silanization, and immersion time. Onset of burst-pattern acoustic signals characteristic of fracturing occurred at different laser powers for different tested groups. Acoustic emissions generally increased with laser power, in which lower laser powers produced low-amplitude (45-50 dB) signals; the amplitude distribution (50-85 dB) became more extensive as laser powers increased. After immersion, the lower laser powers could produce the same phenomenon. The higher the filler fraction, the fewer AEs generated. A large percentage AE reduction due to silanization was noted as a function of filler fraction. Unsilanized specimens showed more thermal damages than did silanized ones.

In vivo and in vitro natural frequency analysis of periodontal conditions: an innovative method.

BACKGROUND: When measuring periodontal disease, various types of equipment for making objective measurements of tooth mobility have been proposed. However, these devices and methodology are insufficient in terms of reliability. An innovative method using vibrational theories to assess the periodontal attachment level of natural teeth is presented in this study. METHODS: Modal testing technique, a non-destructive and time-saving method, was used for non-invasive and quantitative measurement of the natural frequencies of the upper central incisor in vivo and in vitro. A finite element model was established, and modal testing experiments were simulated to assess the relationship between bone level and teeth. RESULTS: The first dominant natural frequency of healthy human upper central incisors ranges from 710 Hz to 3,360 Hz, with an average of 1,701+/-679 Hz. Both in vitro experiment and finite element simulation showed that lowering of the attachment level causes a significant decrease in the natural frequencies, and a strong relationship (r = -0.99, P <0.01) was observed between the frequency and the bone level height. CONCLUSIONS: Our results suggested that natural frequency is an important parameter for assessing the periodontal condition and that the modal testing technique is a useful supplemental method for assessing the attachment conditions of the periodontium.