A Study of the Associated Risk Factors for Early Failure and the Effect of Photofunctionalisation in Full-Arch Immediate Loading Treatment Based on the All-on-Four Concept.

Early implant failure occurring within 1 year after implantation has been attributed to various factors. Particularly, early failure can lead to challenges in maintaining a full-arch prosthetic device, necessitating prompt intervention, including reoperation. This study aimed to retrospectively examine implant- and patient-related factors and the effects of photofunctionalisation associated with early failure in patients who underwent treatment using the all-on-four concept in both the maxilla and mandible. We conducted this retrospective study comprising 561 patients with 2364 implants who underwent implant-supported immediate loading with fixed full-arch rehabilitation using the all-on-four concept. We aimed to assess the survival rate within 1 year after implantation and determine the risk factors influencing early failure. The 1-year survival rates after implantation were 97.1% (patient level) and 98.9% (implant level) for the maxilla and 98.5% (patient level) and 99.6% (implant level) for the mandible. There was a significant difference in the implant-level survival rates between the maxilla and mandible, with a lower rate in the maxilla (p = 0.043). The risk factors associated with early implant failure according to the all-on-four concept included the maxilla (implant level) and smoking (patient level). We could not find a significant effect of photofunctionalisation on early failure (p = 0.25) following this treatment protocol.

The All-on-four concept for fixed full-arch rehabilitation of the edentulous maxilla and mandible: a longitudinal study in Japanese patients with 3-17-year follow-up and analysis of risk factors for survival rate.

PURPOSE: Implant-supported immediately loaded fixed full-arch rehabilitation via All-on-four treatment yields good long-term results for both the maxilla and the mandible. However, the risk factors affecting long-term implant survival are unknown, and the long-term prognosis of All-on-four concept procedures in Japanese individuals has not been elucidated. We aimed to determine the cumulative implant survival rate after 3-17-year follow-up and identify the associated risk factors. METHODS: We analysed 561 cases (307 maxillae, 254 mandibles) with 2364 implants (1324 maxillae, 1040 mandibles) that received All-on-four treatment. We investigated the cumulative implant- and patient-level survival rates and various risk factors for implant failure. Statistical analysis was performed using the log-rank test for differences in Kaplan-Meier curves, univariate analysis using the Chi-square test, and multivariate analysis for risk factors affecting the survival rate. RESULTS: The cumulative survival rate was 94.4% by patient level and 97.4% by implant level for the maxilla, and 96.7% by patient level and 98.9% by implant for the mandible, with up to 17 years of follow-up. The maxillary survival rate at the implant level was significantly lower (p < 0.05). Furthermore, the maxillary survival rate within 24 months was significantly lower at the implant level (p < 0.01). Multivariate analysis revealed that the maxilla was the most significant risk factor (p < 0.01). CONCLUSIONS: All-on-four treatment yielded high long-term survival rates in Japanese patients. However, the maxilla showed a significantly lower cumulative survival rate than the mandible, while early failure was significantly higher. Furthermore, the maxilla was a significant risk factor influencing the survival rate.

Effect of the Correction of Bilateral Differences in Masseter Muscle Functional Pressure on the Mandible of Growing Rats.

The objective of this study is to clarify the effect of restoring the lowered masticatory muscle functional pressure and correcting bilateral differences in masticatory muscle functional pressure on jawbone growth during growth and development with a quantitative evaluation of the changes in the micro/nanostructural characteristics of entheses. Male Wistar rats aged 4 weeks were divided into an experimental group injected with a botulinum toxin serotype A (BoNT/A) formulation to reduce muscle function (BTX group) and a control group (CTRL group). They were euthanised after 6, 8, 10, 12, and 16 weeks after measuring the difference between the midline of the upper and lower incisors. The mandibles were harvested for histological examination, second harmonic generation imaging, and the quantitative evaluation of biological apatite (BAp) crystal alignment. The midline difference decreased with age in weeks. In rats from 6 weeks after BoNT/A administration to 12 weeks after administration, the collagen fibre bundle diameter was significantly smaller in the BTX group; the difference between the two groups decreased with increasing age. BAp crystal alignment was significantly different on the x-axis and the y-axis on the BTX group from 6 weeks after BoNT/A administration to 10 weeks after administration. Asymmetry of mandibular bone formation caused by load imbalance during growth could be corrected by the adjustment of the function of the masseter muscle on either side.

Effects of missing teeth and nasal septal deviation on maxillary sinus volume: a pilot study.

PURPOSE: Tooth extraction and the projection of the tooth roots into the maxillary sinus are reported to greatly reduce the bone height from the alveolar ridge to the maxillary sinus floor, while missing teeth are reported to lead to the expansion of the maxillary sinus, all of which are important considerations during dental implant treatment for the maxillary molar region. Therefore, assessing the anatomical characteristics of the maxillary sinus acting as complicating factors is crucial before sinus augmentation. We conducted a three-dimensional examination of the effects of missing teeth and nasal septal deviation (NSD) on maxillary sinus volume (MSV). METHODS: We selected participants with two or more missing teeth from patients who underwent maxillary sinus augmentation for a unilateral free-end saddle between April 2019 and December 2020. We calculated the MSV and NSD using cone-beam computed tomography (CBCT). We compared the relationships of the presence/absence of teeth and NSD with MSV bilaterally in each patient using the Wilcoxon t-test. p-values < 0.05 denoted statistical significance. RESULTS: This study included 30 patients (30 sinuses; 12 men, 18 women). The average patient age was 58.2 ± 10.2 years (men, 60.4 ± 3.7 years; women, 59.2 ± 4.5 years; range, 40-77 years). The mean number of missing teeth was 2.98 ± 1.01: 13 patients had two missing teeth and 17 had three or more missing teeth. Nine patients (30%) had NSD. The mean MSV on the ipsilateral and contralateral sides of the NSD was 21.50 ± 3.84 cm3 and 22.10 ± 3.56 cm3, respectively; thus, NSD did not affect MSV (p = 0.150). The mean MSV on the edentulous and non-edentulous sides was 21.58 ± 3.89 cm3 and 21.77 ± 4.30 cm3, respectively; thus, the MSV was significantly smaller on the edentulous side (p = 0.00036). CONCLUSION: Although this study was a limited preoperative study, three-dimensional measurement of the maxillary sinus with CBCT in partially edentulous patients revealed that missing teeth lead to substantial reductions in MSV, while NSD was not associated with MSV.

Effects of Excimer Laser Treatment of Zirconia Disks on the Adhesion of L929 Fibroblasts.

The adhesion of zirconia and soft tissue is very important for the success of zirconia implants. The aim of this study was to characterize the effects of excimer laser treatment of zirconia on the adhesion of L929 fibroblasts. In this study, polished zirconia disks treated with an excimer laser were the experimental group and untreated zirconia disks were the control group. Surface roughness and contact angles of zirconia disks were measured. mRNA expression levels of integrin ß1 and collagen type I α1 in L929 fibroblasts cultured on zirconia disks were measured using qRT-PCR. Cell morphology was evaluated using 3D laser microscopy and the expression of vinculin was characterized using confocal microscopy. There was no significant difference in the surface roughness of zirconia disks, but contact angles were significantly lower. mRNA expression of integrin ß1 was significantly higher at 3, 6 and 24 h and of collagen type I α1 was significantly higher at 6 and 24 h. L929 fibroblasts tended to form elongated microspikes and vinculin colocalization in those microspikes. Furthermore, vinculin was strongly expressed in filopodia of L929 fibroblasts at 24 h. These results suggest that excimer laser treatment improves adhesion between zirconia disks and L929 fibroblasts.

Extraction of Maxillary Impacted Teeth with Simultaneous Immediate Full Mouth Loading Using Long Implant: A Case Report.

Here, we describe the provision of an implant-supported prosthesis in a patient with impacted teeth in the maxilla, which complicated implant placement and necessitated utilization of the extraction sockets of previously impacted teeth and residual submerged roots. The patient was a 63-year-old man who visited our clinic with the chief complaint of difficulty in mastication. Numerous residual roots were observed in the maxilla, and radiographic imaging revealed that the residual roots of teeth #13 and #16 were fully impacted. The patient complained of a strong sensation of a foreign body in the area of a denture support overlying these residual roots. Therefore, the impacted teeth were extracted, 5 implants placed, and a temporary prosthesis provided. Given the necessity of placing the implant through the extraction socket of the impacted canine (#13), favorable initial stability was achieved using a long (>20 mm) implant. Moreover, autogenous bone obtained by osteotomy was grafted onto the extracted impacted tooth socket. The clinical condition was stable at approximately 1 year after implant placement and so the final prosthesis was delivered, with periodic check-ups being performed every 3 months thereafter. After 4 years, the patient has reported no symptoms. Clinically, there are no signs of inflammation, and the postoperative condition is deemed to be very favorable.

Anatomic and Histological Study of Lingual Nerve and Its Clinical Implications.

Although the risk of injuring the lingual nerve in the mandibular molar area during dental treatment is high, it can be repaired by nerve grafting. However, from the perspective of clinical dentistry, the pathway and histomorphometric characteristics of this nerve remain to be documented in detail. The purpose of the present study was to morphologically elucidate the pathway of the lingual nerve to clarify its significance in a clinical setting. A histomorphometric analysis was also performed in consideration of nerve grafting. The vertical distance between the occlusal plane and the superior margin of the lingual nerve showed a gradual decrease from the premolar toward the distal molar area. This suggests that the risk of injuring the lingual nerve increases gradually toward the distal area. The average total fascicular area of the lingual nerve was 1.90 mm2, which was larger than that of the sural nerve. It is the first-choice donor nerve for grafting. Therefore, even though the total fascicular area of the donor nerve is a little smaller than that of the recipient nerve, nerve grafting should be successful.

Development and Clinical Evaluation of New Topical Anesthetic Formulations for Dental Care.

To provide safe dental care, it is important to minimize the pain associated with the initial injection of the local anesthetic. For this purpose, a topical anesthetic is preliminarily applied to the area where a needle will be inserted in a clinical setting. In this study, we prepared new topical anesthetic formulations with favorable intra-oral retentivity and an excellent anesthetic effect, and clinically evaluated their efficacy. We used 4% lidocaine solution as an anesthetic drug and gelatin, agar, and a food thickener as a base to prepare new topical anesthetic formulations. The subjects rested in a supine position on a chair for dental practice prior to the following experiments. Firstly, about 0.2 g of the sample was applied at a test site. One minute later, the sample was removed, and a 30 G dental injection needle was inserted into the test site. The agar/gelatin-based formulation containing gelatin of 2% and agar of 1% had a moderate solidity at 25°C and a moderate fluidity at 37°C. This formulation showed a significantly greater depth than any of the commercially available topical anesthetics. The results of the present study demonstrated that the agar/gelatin-based formulation showed an excellent analgesic effect against pain associated with needle insertion.

Regional Anatomical Observation of Morphology of Greater Palatine Canal and Surrounding Structures.

In maxillary molar region implant therapy, support is sometimes obtained from trabecular bone comprising the maxillary tuberosity, pterygoid process of the sphenoid bone, and pyramidal process of the palatine bone. Great care is necessary in such cases due to the presence of the greater palatine canal, which forms a passageway for the greater palatine artery, vein, and nerve. However, clinical anatomical reports envisioning embedding of pterygomaxillary implants in this trabecular bone region have been limited in number. In this study, the 3-D morphology of the greater palatine canal region, including the maxillary tuberosity region and points requiring particular care in pterygomaxillary implantation, were therefore investigated. Micro-CT was used to image 20 dentulous jaws (40 sides) harvested from the dry skulls of Japanese individuals with a mean age of 28.2 years at time of death. The skulls were obtained from the Jikei University School of Medicine cadaver repository. Three-dimensional reconstruction of the trabecular bone region, including the greater palatine canal, was performed using software for 3-D measurement of trabecular bone structure. Trabecular bone region morphometry was performed with the hamular notch-incisive papilla (HIP) plane as the reference plane. The results showed a truncated-cone structure with the greater palatine foramen as the base extending to the pterygopalatine fossa. This indicates the need for care with respect to proximity of the dental implant body to the greater palatine canal and the risk of perforation if it is embedded in the maxillary tuberosity region at an inclination of 60° toward the lingual side. Moreover, caution must be exercised to avoid possible damage to the medial wall of the maxillary sinus if the inclination of the embedded dental implant body is almost perpendicular to the HIP plane.

A prospective multicenter study of immediate function of 1-piece implants: a 3-year follow-up report.

STATEMENT OF PROBLEM: Although 1-piece implants are associated with positive clinical outcomes, including improved implant stability, overall survival rate, and marginal bone levels, a few studies have suggested that 1-piece implants have low success rates. PURPOSE: This prospective multicenter study evaluated the efficacy of 1-piece implants placed in immediate function in private clinic-based and hospital-based settings with a focus on marginal bone level changes and esthetic outcomes over a 3-year follow-up period. MATERIAL AND METHODS: A total of 93 one-piece implants (29 maxillary, 64 mandibular) were placed in 63 participants (25 men and 38 women) at 1 university hospital and 3 private clinics. The implants were restored with interim crowns immediately after placement. Clinical and radiographic evaluations of marginal bone level, implant stability, periimplant mucosa, and plaque and papilla indices were performed at the time of implantation and after 6, 12, 24, and 36 months. RESULTS: The 3-year cumulative implant survival rate was 100%. After implant placement, mean bone levels changed from -0.16 ±1.41 mm at 24 months to 0.40 ±1.46 mm at 36 months. Clinical parameters, including implant stability, periimplant mucosa, and plaque index, remained stable from 3 to 36 months during follow-up. The papilla index score increased over time. CONCLUSIONS: Within the limitations of this prospective study, marginal bone level was maintained, soft tissue integration was achieved, and a cumulative survival rate of 100% was obtained for 1-piece implants. The present findings indicate that 1-piece implants are an effective treatment option for immediate function situations.

Relationship between function of masticatory muscle in mouse and properties of muscle fibers.

Mammals exhibit marked morphological differences in the muscles surrounding the jaw bone due to differences in eating habits. Furthermore, the myofiber properties of the muscles differ with function. Since the muscles in the oral region have various functions such as eating, swallowing, and speech, it is believed that the functional role of each muscle differs. Therefore, to clarify the functional role of each masticatory muscle, the myofiber properties of the adult mouse masticatory muscles were investigated at the transcriptional level. Expression of MyHC-2b with a fast contraction rate and strong force was frequently noted in the temporal and masseter muscles. This suggests that the temporal and masseter muscles are closely involved in rapid antero-posterior masticatory movement, which is characteristic in mice. Furthermore, expression of MyHC-1 with a low contraction rate and weak continuous force was frequently detected in the lateral pterygoid muscle. This suggests that, in contrast to other masticatory muscles, mouse lateral pterygoid muscle is not involved in fast masticatory movement, but is involved in functions requiring continuous force such as retention of jaw position. This study revealed that muscles with different roles function comprehensively during complicated masticatory movement.