Biodegradation of poly(butylene adipate terephthalate) and poly(vinyl alcohol) within aquatic pathway.

Understanding the environmental fate of biodegradable plastics in aquatic systems is crucial, given the alarming amount of plastic waste and microplastic particles transported through aquatic pathways. In particular, there is a need to analyze the biodegradation of commercialized biodegradable plastics upon release from wastewater treatment plants into natural aquatic systems. This study investigates the biodegradation behaviors of poly(butylene adipate terephthalate) (PBAT) and poly(vinyl alcohol) (PVA) in wastewater, freshwater, and seawater. Biodegradation of PBAT and PVA assessed through biochemical oxygen demand (BOD) experiments and microcosm tests revealed that the type of aquatic system governs the biodegradation behaviors of each plastic, with the highest biodegradation rate achieved in wastewater for both PBAT and PVA (25.6 and 32.2 % in 30 d, respectively). Plastic release pathway from wastewater into other aquatic systems simulated by sequential incubation in different microcosms suggested that PBAT exposed to wastewater and freshwater before reaching seawater was more prone to degradation than when directly exposed to seawater. On the other hand, PVA displayed comparable biodegradation rate regardless of whether it was directly exposed to seawater or had passed through other environments beforehand. Metagenome amplicon sequencing of 16S rRNA genes revealed distinct community shifts dependent on the type of plastics in changing environments along the simulated aquatic pathway. Several bacterial species putatively implicated in the biodegradation of PBAT and PVA are discussed. Our findings underscore the significant influence of pollution routes on the biodegradation of PBAT and PVA, highlighting the potential for wastewater treatment to facilitate rapid degradation compared to direct exposure to pristine aquatic environments.

Methane emissions and the microbial community in flooded paddies affected by the application of Fe-stabilized natural organic matter.

Redox chemistry involving the quinone/phenol cycling of natural organic matter (NOM) is known to modulate microbial respiration. Complexation with metals or minerals can also affect NOM solubilization and stability. Inspired by these natural phenomena, a new soil amendment approach was suggested to effectively decrease methane emissions in flooded rice paddies. Structurally stable forms of NOM such as lignin and humic acids (HAs) were shown to decrease methane gas emissions in a vial experiment using different soil types and rice straw as a methanogenic substrate, and this inhibitory behavior was likely enhanced by ferric ion-NOM complexation. A mechanistic study using HAs revealed that complexation facilitated the slow release of the humic components. Interestingly, borohydride-based reduction, which transformed quinone moieties into phenols, caused the HAs to lose their inhibitory capacity, suggesting that the electron-accepting ability of HAs is vital for their inhibitory effect. In rice field tests, the humic-metal complexes were shown to successfully mitigate methane generation, while carbon dioxide emissions were relatively unchanged. Microbial community analysis of the rice fields by season revealed a decrease in specific cellulose-metabolizing and methanogenic genera associated with methane emissions. In contrast, the relative abundance of Thaumarchaeota and Actinomycetota, which are associated with NOM and recalcitrant organics, was higher in the presence of Fe-stabilized HAs. These microbial dynamics suggest that the slow release of humic components is effective in modulating the anoxic soil microbiome, possibly due to their electron-accepting ability. Given the simplicity, cost-effectiveness, and soil-friendly nature of complexation processes, Fe-stabilized NOM represents a promising approach for the mitigation of methane emissions from flooded rice paddies.

PET/Bio-Based Terpolyester Blends with High Dimensional Thermal Stability.

To improve the dimensional thermal stability of polyethylene terephthalate (PET), a poly(ethylene glycol 1,4-cyclohexane dimethylene (CHDM) isosorbide (ISB) terephthalate) (PEICT) known as ECOZEN®T110 (EZT) was introduced into PET using a melt blending technique. The miscibility, morphology, and thermal properties of the PET/EZT samples were investigated. The introduction of amorphous EZT into semi-crystalline PET increased the glass transition temperature (Tg) but decreased the crystallinity, which could be related to the transesterification reaction. By adding EZT contents up to 20%, the PET/EZT samples showed a single Tg, which indicated the miscibility between PET and EZT. However, two Tg values were observed in the PET/EZT samples with higher EZT contents (30-70%), indicating partial miscibility. This may have been due to the slightly different rheological and thermodynamic parameters that were affected by a higher ratio of bulky (rigid ISB and ductile CHDM) groups in EZT. However, the heat distortion temperature of the PET/EZT samples remarkably increased, which indicated that the dimensional stability was truly enhanced. Although the crystallinity of the PET/EZT samples decreased with increasing EZT content, the tensile strength and Young's modulus decreased slightly. Based on these results, the as-prepared PET/EZT samples with high dimensional stability can be used as a high-temperature polymeric material in various applications.

One-step microchip for DNA fluorescent labeling.

In this study, we propose a microchip that is sequentially capable of fluorescently staining and washing DNAs. The main advantage of this microchip is that it allows for one-step preparation of small amounts of solution without degrading microscopic bio-objects such as the DNAs, cells, and biomolecules to be stained. The microchip consists of two inlets, the main channel, staining zone, washing zone, and one outlet, and was processed using a femtosecond laser system. High molecular transport of rhodamine B to deionized water was observed in the performance test of the microchip. Results revealed that the one-step procedure of on-chip DNA staining and washing was excellent compared to the conventional staining method. The one-step preparation of stained and washed DNAs through the microchip will be useful for preparing small volumes of experimental samples.