Air-coupled ultrasonic diffuse-wave techniques to evaluate distributed cracking damage in concrete.

In this study, we investigated the suitability of applying air-coupled ultrasonic diffuse-wave techniques to concrete structures for the evaluation of arbitrarily distributed micro-cracking damage. Air-coupled test results were compared with those obtained using a conventional full-contact measurement system. Three different micro-cracking damage levels were simulated by embedding varying amounts of low-stiffness polypropylene fibers in concrete samples. Two principal diffuse-wave parameters, diffusivity and dissipation, were determined using air-coupled and full-contact test configurations. Wave frequencies of 300-600 kHz were employed, which set up significant ultrasonic scattering owing to the heterogeneous characteristics of concrete components (e.g., aggregates, micro-cracks expressed by fibers, and pores). In addition, the sensitivities of diffusivity and dissipation to the number of measurement locations were examined. The results demonstrated that the air-coupled method can provide an equivalent reliability to the full-contact method, allowing a much faster and flexible data collection. The spatial averaging of 20 arbitrarily selected data (measured at different locations) yielded sufficiently accurate diffuse-wave parameters, showing less than a 5 % difference from the average of 32 spatially different data.

Applicability of Diffuse Ultrasound to Evaluation of the Water Permeability and Chloride Ion Penetrability of Cracked Concrete.

This study aims to explore the applicability of diffuse ultrasound to the evaluation of water permeability and chloride ion penetrability of cracked concrete. Lab-scale experiments were conducted on disk-shaped concrete specimens, each having a different width of a penetrating crack that was generated by splitting tension along the centerline. The average crack width of each specimen was determined using an image binarization technique. The diffuse ultrasound test employed signals in the frequency range of 200 to 440 kHz. The water flow rate was measured using a constant water-head permeability method, and the chloride diffusion coefficient was determined using a modified steady-state migration method. Then, the effects of crack width on the diffusion characteristics of ultrasound (i.e., diffusivity, dissipation), water flow rate, and chloride diffusion coefficient are investigated. The correlations between the water flow rate and diffuse ultrasound parameters, and between the chloride diffusion coefficient and diffuse ultrasound parameters, are examined. The results suggest that diffuse ultrasound is a promising method for assessing the water permeability and chloride ion penetrability of cracked concrete.

Surface-Wave Based Model for Estimation of Discontinuity Depth in Concrete.

In this paper, we propose an accurate and practical model for the estimation of surface-breaking discontinuity (i.e., crack) depth in concrete through quantitative characterization of surface-wave transmission across the discontinuity. The effects of three different mixture types (mortar, normal strength concrete, and high strength concrete) and four different simulated crack depths on surface-wave transmission were examined through experiments carried out on lab-scale concrete specimens. The crack depth estimation model is based on a surface-wave spectral energy approach that is capable of taking into account a wide range of wave frequencies. The accuracy of the proposed crack depth estimation model is validated by root mean square error analysis of data from repeated spectral energy transmission ratio measurements for each specimen.

Combined Effects of Set Retarders and Polymer Powder on the Properties of Calcium Sulfoaluminate Blended Cement Systems.

This study investigates the effects of set retarders on the properties of polymer-modified calcium sulfoaluminate (CSA) and Portland cement blend systems at early and long-term ages. The fast setting of the cement blend systems is typically adjusted by using retarders to ensure an adequate workability. However, how the addition of retarders influences the age-dependent characteristics of the cement blend systems was rarely investigated. This study particularly examines the effects of retarders on the microstructure and strength development of polymer-modified CSA and Portland cement blend pastes and mortars from 2 h to 90 days. The macro- and microstructural properties are characterized by compression testing, powder X-ray diffraction, mercury intrusion porosimetry, and scanning electron microscopy with energy dispersive spectroscopy. The test results reveal that the use of retarders delayed the strength development of the cement blend systems at the very early age by hindering the production of ettringite, which was cumulative to the delaying effect of polymer, but it increased the ultimate strength by creating denser and finer pore structures with the evolution of hydration products.

Concrete Crack Identification Using a UAV Incorporating Hybrid Image Processing.

Crack assessment is an essential process in the maintenance of concrete structures. In general, concrete cracks are inspected by manual visual observation of the surface, which is intrinsically subjective as it depends on the experience of inspectors. Further, it is time-consuming, expensive, and often unsafe when inaccessible structural members are to be assessed. Unmanned aerial vehicle (UAV) technologies combined with digital image processing have recently been applied to crack assessment to overcome the drawbacks of manual visual inspection. However, identification of crack information in terms of width and length has not been fully explored in the UAV-based applications, because of the absence of distance measurement and tailored image processing. This paper presents a crack identification strategy that combines hybrid image processing with UAV technology. Equipped with a camera, an ultrasonic displacement sensor, and a WiFi module, the system provides the image of cracks and the associated working distance from a target structure on demand. The obtained information is subsequently processed by hybrid image binarization to estimate the crack width accurately while minimizing the loss of the crack length information. The proposed system has shown to successfully measure cracks thicker than 0.1 mm with the maximum length estimation error of 7.3%.

Principles and Applications of Ultrasonic-Based Nondestructive Methods for Self-Healing in Cementitious Materials.

Recently, self-healing technologies have emerged as a promising approach to extend the service life of social infrastructure in the field of concrete construction. However, current evaluations of the self-healing technologies developed for cementitious materials are mostly limited to lab-scale experiments to inspect changes in surface crack width (by optical microscopy) and permeability. Furthermore, there is a universal lack of unified test methods to assess the effectiveness of self-healing technologies. Particularly, with respect to the self-healing of concrete applied in actual construction, nondestructive test methods are required to avoid interrupting the use of the structures under evaluation. This paper presents a review of all existing research on the principles of ultrasonic test methods and case studies pertaining to self-healing concrete. The main objective of the study is to examine the applicability and limitation of various ultrasonic test methods in assessing the self-healing performance. Finally, future directions on the development of reliable assessment methods for self-healing cementitious materials are suggested.