PANI-wrapped BaFe12O19 and SrFe12O19 with rGO composite materials for electromagnetic interference shielding applications.

We report electromagnetic interference (EMI) shielding efficiency in the PANI-wrapped BaFe12O19 and SrFe12O19 with rGO composites. Barium and strontium hexaferrites were synthesized using the nitrate citrate gel combustion method. These hexaferrites were polymerized in situ with aniline. The PANI-coated ferrite-based composite materials were developed along with reduced graphene oxide (rGO) in acrylonitrile butadiene styrene (ABS) polymer, and their shielding effectiveness was assessed in X-band frequency range (8.2-12.4 GHz). The reflection (SER) and absorption (SEA) mechanism of shielding effectiveness was discussed with the different rGO concentrations. The results reveal that 5 wt% of rGO with PANI-coated barium and strontium hexaferrite polymer composites exhibit shielding efficiency of 21.5 dB and 19.5 dB, respectively, for 1 mm thickness composite. These hexaferrite polymer-based composite materials can be used as an attractive candidate for EM shielding materials in various technological applications.

In Silico Computational Studies of Bioactive Secondary Metabolites from Wedelia trilobata against Anti-Apoptotic B-Cell Lymphoma-2 (Bcl-2) Protein Associated with Cancer Cell Survival and Resistance.

In the present study, the binding affinity of 52 bioactive secondary metabolites from Wedelia trilobata towards the anti-apoptotic B-cell lymphoma-2 (Bcl-2) protein (PDB: 2W3L) structure was identified by using in silico molecular docking and molecular dynamics simulation. The molecular docking results demonstrated that the binding energies of docked compounds with Bcl-2 protein ranged from -5.3 kcal/mol to -10.1 kcal/mol. However, the lowest binding energy (-10.1 kcal/mol) was offered by Friedelin against Bcl-2 protein when compared to other metabolites and the standard drug Obatoclax (-8.4 kcal/mol). The molecular dynamics simulations revealed that the Friedelin-Bcl-2 protein complex was found to be stable throughout the simulation period of 100 ns. Overall, the predicted Absorption, Distribution, Metabolism, Excretion, and Toxicity (ADMET) properties of Friedelin are relatively better than Obatoclax, with the most noticeable differences in many parameters where Friedelin has no AMES toxicity, hepatotoxicity, and skin sensitization. The ADMET profiling of selected compounds supported their in silico drug-likeness properties. Based on the computational analyses, the present study concluded that Friedelin of W. trilobata was found to be the potential inhibitor of the Bcl-2 protein, which merits attention for further in vitro and in vivo studies before clinical trials.

Enhanced emission intensity in (Li+/Ca2+/Bi3+) ions co-doped NaLa(MoO4)2: Dy3+phosphors and their Judd-Ofelt analysis for WLEDs applications.

In the present study, we have synthesized a series of Dy3+ ion doped NaLa(MoO4)2phosphors by the conventional solid-state method at 750 °C for 4h. All the compounds were crystallized in the tetragonal scheelite type structure with space group (I41/a, No.88). The morphology and functional group were confirmed by the field emission scanning electron microscopy (FE-SEM) and Fourier transform infrared(FTIR)spectroscopy. Upon near-Ultraviolet (n-UV) excitation, the PL spectra exhibit the two characteristic emissions of Dy3+ ions, blue (4F9/2→6H15/2) at 487 nm and yellow (4F9/2→6H13/2) at 574nm respectively. The optimum concentration of Dy3+ionis 3 mol% and then quenching occurred due to multipolar interaction. Further, enhanced the emission intensity by co-doping with monovalent (Li+), divalent (Ca2+) and trivalent (Bi3+) ions. Among them, Li+ ion co-doped samples are shown maximum intensity (50 times) more than Dy3+ doped phosphors as relaxation of parity restriction of electric dipole transition because of local distortion of crystal field around the Dy3+ ions. In addition, by incorporation of Eu3+ ions into NaLa(MoO4)2:Dy3+system, tuned the emission color from white to red, owing to energy transfer from Dy3+ to Eu3+ ions. The intensity parameters (Ω2, Ω4) and radiative properties such as transition probabilities (AT), radiative lifetime (rad), and branching ratio were calculated using the Judd-Ofelt theory. CIE color coordinates, CCT values indicates that these phosphors exhibit an excellent white emission. The determined radiative properties, CIE and CCT results revealed that the Dy3+-activated NaLa(MoO4)2phosphors are potential materials for developing white LEDs, and optoelectronic device fabrications.

Integrated approach for studying bioactive compounds from Cladosporium spp. against estrogen receptor alpha as breast cancer drug target.

Cladosporium spp. have been reported for their great diversity of secondary metabolites which represent as a prominent base material for verifying the biological activities. Several bioactive compounds which have antimicrobial, cytotoxic, quorum sensing inhibitory and phytotoxic activities have been isolated from Cladosporium species. Most of them are still needed to be explored for their anticancer properties. Therefore, the present study is focused on screening and identifying the bioactive compounds of Cladosporium spp. for their anticancer activity via the integrated approaches of Molecular Docking (MD), Molecular Dynamics Simulation (MDS) and Density Functional Theory (DFT) studies. A total of 123 bioactive compounds of Cladosporium spp. were explored for their binding affinity with the selected breast cancer drug target receptor such as estrogen receptor alpha (PDB:6CBZ). The Molecular Docking studies revealed that amongst the bioactive compounds screened, Altertoxin X and Cladosporol H showed a good binding affinity of - 10.5 kcal/mol and - 10.3 kcal/mol, respectively, with the estrogen receptor alpha when compared to the reference compound (17[Formula: see text]-Estradiol: - 10.2 kcal/mol). The MDS study indicated the stable binding patterns and conformation of the estrogen receptor alpha-Altertoxin X complex in a stimulating environment. In addition, in silico absorption, distribution, metabolism, excretion and toxicity (ADMET) study suggested that Altertoxin X has a good oral bioavailability with a high LD[Formula: see text] value of 2.375 mol/kg and did not cause any hepatotoxicity and skin sensitization. In summary, the integrated approaches revealed that Altertoxin X possesses a promising anticancer activity and could serve as a new therapeutic drug for breast cancer treatment.

A novel amperometric catechol biosensor based on α-Fe2O3 nanocrystals-modified carbon paste electrode.

In this work, we designed an amperometric catechol biosensor based on α-Fe2O3 nanocrystals (NCs) incorporated carbon-paste electrode. Laccase enzyme is then assembled onto the modified electrode surface to form a nanobiocomposite enhancing the electron transfer reactions at the enzyme's active metal centers for catechol oxidation. The biosensor gave good sensitivity with a linear detection response in the range of 8-800 µM with limit of detection 4.28 µM. We successfully employed the sensor for real water sample analysis. The results illustrate that the metal oxide NCs have enormous potential in the construction of biosensors for sensitive determination of phenol derivatives.

Charge compensation assisted enhancement of photoluminescence in combustion derived Li+ co-doped cubic ZrO2:Eu3+ nanophosphors.

Red light emitting cubic Zr0.99Eu0.01O2:Li+ (0-9 mol%) nanoparticles are synthesized by a low temperature, self-propagating solution combustion method using oxalyl di-hydrazide (ODH) as fuel. In this study, we report systematic investigation of the effect of lithium ion (Li+) concentration on the structural properties and the photoluminescence of zirconia. With increasing lithium concentration, the crystallinity of the samples increases and the lattice strain decreases. The higher crystallinity is likely due to charge compensation achieved by replacing one Zr4+ ion by a Eu3+ and a Li+ ion. Scanning electron micrographs (SEM) reveal a mesoporous structure characteristic of combustion derived nanomaterials. Photoluminescence (PL) spectra show that the intensity of the red emission (606 nm) is highly dependent on Li+ ion concentration. Furthermore there is a promising enhancement in the associated lifetime. Upon Li+ doping, the PL intensity of the samples is found to increase by two fold compared to the undoped sample. Variation of PL intensity with Li+ concentration is attributed to the differences in probability of non-radiative recombination (relaxing). Intensity parameters (Ω2, Ω) and radiative properties such as transition rates (A), branching ratios (ß), stimulated emission cross-section (σe), gain bandwidth (σe × Δλeff) and optical gain (σe × τ) are calculated using the Judd-Ofelt theory. The calculated values suggest that in optimally co-doped samples, in addition to improved crystallinity and charge compensation, the lowering of Eu3+ site symmetry and the increase in the covalency of Eu-O bonding due to interstitial Li are responsible for the observed enhancement in PL intensity.

Structure and Catalytic Activity of Cr-Doped BaTiO3 Nanocatalysts Synthesized by Conventional Oxalate and Microwave Assisted Hydrothermal Methods.

In the present study synthesis of BaTi1-xCrxO3 nanocatalysts (x = 0.0 ≤ x ≤ 0.05) by conventional oxalate and microwave assisted hydrothermal synthesis methods was carried out to investigate the effect of synthesis methods on the physicochemical and catalytic properties of nanocatalysts. These catalysts were thoroughly characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), N2 physisortion, and total acidity by pyridine adsorption method. Their catalytic performance was evaluated for the reduction of nitrobenzene using hydrazine hydrate as the hydrogen source. Structural parameters refined by Rietveld analysis using XRD powder data indicate that BaTi1-xCrxO3 conventional catalysts were crystallized in the tetragonal BaTiO3 structure with space group P4mm, and microwave catalysts crystallized in pure cubic BaTiO3 structure with space group Pm3̅m. TEM analysis of the catalysts reveal spherical morphology of the particles, and these are uniformly dispersed in microwave catalysts whereas agglomeration of the particles was observed in conventional catalysts. Particle size of the microwave catalysts is found to be 20-35 nm compared to conventional catalysts (30-48 nm). XPS studies reveal that Cr is present in the 3+ and 6+ mixed valence state in all the catalysts. Microwave synthesized catalysts showed a 4-10-fold increase in surface area and pore volume compared to conventional catalysts. Acidity of the BaTiO3 catalysts improved with Cr dopant in the catalysts, and this could be due to an increase in the number of Lewis acid sites with an increase in Cr content of all the catalysts. Catalytic reduction of nitrobenzene to aniline studies reveals that BaTiO3 synthesized by microwave is very active and showed 99.3% nitrobenzene conversion with 98.2% aniline yield. The presence of Cr in the catalysts facilitates a faster reduction reaction in all the catalysts, and its effect is particularly notable in conventional synthesized catalysts.

Synthesis of Eu³âº-activated BaMoO4 phosphors and their Judd-Ofelt analysis: Applications in lasers and white LEDs.

Eu(3+)-activated BaMoO4 phosphors were synthesized by the nitrate-citrate gel combustion method. The Rietveld refinement analysis confirmed that all the compounds were crystallized in the scheelite-type tetragonal structure with I41/a (No. 88) space group. Photoluminescence (PL) spectra of BaMoO4 phosphor reveals broad emission peaks at 465 and 605 nm, whereas the Eu(3+)-activated BaMoO4 phosphors show intense 615 nm ((5)D0→(7)F2) emission peak. Judd-Ofelt theory was applied to evaluate the intensity parameters (Ω2, Ω4) of Eu(3+)-activated BaMoO4 phosphors. The transition probabilities (AT), radiative lifetime (τrad), branching ratio (ß), stimulated emission cross-section (σe), gain bandwidth (σe×Δλeff) and optical gain (σe×τrad) were investigated by using the intensity parameters. CIE color coordinates confirmed that the BaMoO4 and Eu(3+)-activated BaMoO4 phosphors exhibit white and red luminescence, respectively. The obtained results revealed that the present phosphors can be a potential candidate for red lasers and white LEDs applications.

Shape tailored green synthesis of CeO2:Ho³âº nanopowders, its structural, photoluminescence and gamma radiation sensing properties.

CeO2:Ho(3+) (1-9 mol%) nanopowders have been prepared by efficient and environmental friendly green combustion method using Aloe vera gel as fuel for the first time. The final products are well characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), fourier transform infrared (FTIR). Bell, urchin, core shell and flower like morphologies are observed with different concentrations of the A. vera gel. It is apparent that by adjusting the concentration of the gel, considerable changes in the formation of CeO2:Ho(3+) nano structures can be achieved. Photoluminescence (PL) studies show green (543, 548 nm) and red (645, 732 nm) emissions upon excited at 400 nm wavelength. The emission peaks at ∼526, 548, 655 and 732 nm are associated with the transitions of (5)F3→(5)I8, (5)S2→(5)I8, (5)F5→(5)I8 and (5)S2→(5)I7, respectively. Three TL glow peaks are observed at 118, 267 and 204°C for all the γ irradiated samples which specify the surface and deeper traps. Linear TL response in the range 0.1-2kGy shows that phosphor is fairly useful as γ radiation dosimeter. Kinetic parameters associated with the glow peaks are estimated using Chen's half width method. The CIE coordinate values show that phosphor is quite useful for the possible applications in WLEDs as orange red phosphor.

Synthesis, characterization and photoluminescence properties of Bi³âº co-doped CaSiO3:Eu³âº nanophosphor.

Ceramic luminescent powders with the composition Ca(0.96-x)Eu0.04Bi(x)SiO3 (x=0.01-0.05) were prepared by solution combustion method. The nanopowders are characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR) and photoluminescence (PL) techniques. PXRD patterns of calcined (950°C for 3h) Ca(0.96-x)Eu0.04Bi(x)SiO3 powders exhibit monoclinic phase with mean crystallite sizes ranging from 28 to 48 nm. SEM micrographs show the products are foamy, agglomerated and fluffy in nature due to the large amount of gases liberated during combustion reaction. TEM micrograph shows the crystalline characteristics of the nanoparticles. Upon 280 nm excitation, the photoluminescence of the Ca(0.96-x)Eu0.04Bi(x)SiO3 particles show red emission at 611 nm corresponding to 5D0→7F2 transition. It is observed that PL intensity increases with Bi(3+) concentration. Our work demonstrates very interesting energy transfer from Bi(3+) to Eu(3+) in CaSiO3 host.

Synthesis, luminescence properties and EPR investigation of hydrothermally derived uniform ZnO hexagonal rods.

One-dimensional (1D) zinc oxide (ZnO) hexagonal rods have been successfully synthesized by surfactant free hydrothermal process at different temperatures. It can be found that the reaction temperature play a crucial role in the formation of ZnO uniform hexagonal rods. The possible formation processes of 1-D ZnO hexagonal rods were investigated. The zinc hydroxide acts as the morphology-formative intermediate for the formation of ZnO nanorods. Upon excitation at 325 nm, the sample prepared at 180°C show several emission bands at 400 nm (∼3.10 eV), 420 nm (∼2.95 eV), 482 nm (∼2.57 eV) and 524 nm (∼2.36 eV) corresponding to different kind of defects. TL studies were carried out by pre-irradiating samples with γ-rays ranging from 1 to 7 kGy at room temperature. A well resolved glow peak at ∼354°C was recorded which can be ascribed to deep traps. Furthermore, the defects associated with surface states in ZnO nano-structures are characterized by electron paramagnetic resonance.

Combustion synthesized tetragonal ZrO2: Eu(3+) nanophosphors: structural and photoluminescence studies.

Novel crystalline tetragonal ZrO2: Eu(3+) phosphors were prepared by a facile and efficient low temperature solution combustion method at 400±10 °C using oxalyl dihydrazide (ODH) as fuel. The powder X-ray diffraction patterns and Rietveld confinement of as formed ZrO2: Eu(3+) (1-11 mol%) confirmed the presence of body centered tetragonal phase. The crystallite size estimated from Scherrer's and W-H plots was found to be in the range of 7-17 nm. These results were in good agreement with transmission electron microscopy studies. The calculated microstrain in most of the planes indicated the presence of tensile stress along various planes of the particles. The observed space group (P42/nmc) revealed the presence of cations in the 2b positions (0.75, 0.25, 0.25) and the anions in the 4d positions (0.25, 0.25, 0.45). The optical band gap energies estimated from Wood and Tauc's relation was found to be in the range 4.3-4.7 eV. Photoluminescence (PL) emission was recorded under 394 and 464 nm excitation shows an intense emission peak at 605 nm along with other emission peaks at 537, 592, 605 and 713 nm. These emission peaks were attributed to the transition of (5)D0→(7)FJ (J=0, 1, 2, 3) of Eu(3+) ions. The high ratio of Intensity of ((5)D0→(7)F2) and ((5)D0→(7)F1) infers that Eu(3+) occupies sites with a low symmetry and without an inversion center. CIE color coordinates indicated the red regions which could meet the needs of illumination devices.

Facile synthesis of PbWO4: applications in photoluminescence and photocatalytic degradation of organic dyes under visible light.

Stolzite polymorph of PbWO4 catalyst was prepared by the facile room temperature precipitation method. Structural parameters were refined by the Rietveld analysis using powder X-ray data. PbWO4 was crystallized in the scheelite-type tetragonal structure with space group I41/a (No. 88). Field emission scanning electron microscopy revealed leaf like morphology. Photoluminescence spectra exhibit broad blue emission (425 nm) under the excitation of 356 nm. The photocatalytic degradation of Methylene blue, Rhodamine B and Methyl orange dyes were measured under visible illumination. The 100% dye degradation was observed for MB and RhB dyes within 60 and 105 min. The rate constant was found to be in the decreasing order of MB>RhB>MO which followed the 1st order kinetic mechanism. Therefore, PbWO4 can be a potential candidate for blue component in white LEDs and also acts as a catalyst for the treatment of toxic and non-biodegradable organic pollutants in water.

GdAlO3:Eu(3+):Bi(3+) nanophosphor: synthesis and enhancement of red emission for WLEDs.

GdAlO3, GdAlO3:Eu(3+) and GdAlO3:Eu(3+):Bi(3+) nanophosphors were synthesised by solution combustion technique. Pure orthorhombic phase was obtained from powder X-ray diffraction (PXRD) studies. Scanning electron microscopy (SEM) micrographs showed the porous, agglomerated and irregular shaped particles. The particle size obtained by transmission electron microscopy (TEM) measurement was in good agreement with the values obtained by Debye Scherrer's and W-H plots. The selected area electron diffraction (SAED) pattern show single crystalline nature of the sample. Photoluminescence (PL) measurements were carried out for GdAlO3:Eu(3+) and GdAlO3:Eu(3+):Bi(3+) phosphors excited at a wavelength of 274nm. The characteristic emission peaks of Eu(3+) ions were recorded at 590, 614, 655 and 695nm corresponding to (5)D0→(7)FJ (J=1, 2, 3, 4) transitions respectively. However, with addition of Bi(3+) ions in GdAlO3:Eu(3+), PL intensity drastically enhanced. Orange red color was tuned to deep red color with the addition of Bi(3+) ions in GdAlO3:Eu(3+) phosphor. Therefore, the phosphor was highly useful as red component in WLEDs. A single well resoled glow peak at 225°C was recorded in GdAlO3 and GdAlO3:Eu(3+). Further, with addition of Bi(3+) ions, an additional peak at 300°C was recorded. TL glow curves of different UV-exposed GdAlO3:Eu(3+):Bi(3+) show two TL peaks at 207 and 300°C respectively. The 207°C peak show simple glow peak structure and its intensity increases linearly up to 25min and after that it decrease.

Luminescence studies and EPR investigation of solution combustion derived Eu doped ZnO.

ZnO:Eu (0.1 mol%) nanopowders have been synthesized by auto ignition based low temperature solution combustion method. Powder X-ray diffraction (PXRD) patterns confirm the nanosized particles which exhibit hexagonal wurtzite structure. The crystallite size estimated from Scherrer's formula was found to be in the range 35-39 nm. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) studies reveal particles are agglomerated with quasi-hexagonal morphology. A blue shift of absorption edge with increase in band gap is observed for Eu doped ZnO samples. Upon 254 nm excitation, ZnO:Eu nanopowders show peaks in regions blue (420-484 nm), green (528 nm) and red (600 nm) which corresponds to both Eu2+ and Eu3+ ions. The electron paramagnetic resonance (EPR) spectrum exhibits a broad resonance signal at g=4.195 which is attributed to Eu2+ ions. Further, EPR and thermoluminescence (TL) studies reveal presence of native defects in this phosphor. Using TL glow peaks the trap parameters have been evaluated and discussed.

Role of Cu2+ ions substitution in magnetic and conductivity behavior of nano-CoFe2O4.

Cobalt copper ferrite nanopowders with composition Co1-xCuxFe2O4 (0.0≤x≤0.5) was synthesized by solution combustion method. The powder X-ray diffraction studies reveal the formation of single ferrite phase with particle size of ∼11-35 nm. Due to increase in electron density with in a material, X-ray density increase with increase of Cu2+ ions concentration. As Cu2+ ions concentration increases, saturation magnetization decreases from 38.5 to 26.7 emu g(-1). Further, the squareness ratio was found to be ∼0.31-0.46 which was well below the typical value 1, which indicates the existence of single domain isolated ferrimagnetic samples. The dielectric and electrical modulus was studied over a frequency range of 1 Hz to 1 MHz at room temperature using the complex impedance spectroscopy technique. Impedance plots showed only one semi-circle which corresponds to the contributions of grain boundaries. The lower values of dielectric loss at higher frequency region may be quite useful for high frequency applications such as microwave devices.

Synthesis and luminescence properties of Sm3+ doped CaTiO3 nanophosphor for application in white LED under NUV excitation.

CaTiO3:Sm(3+) (1-11 mol%) nanophosphors were successfully synthesized by a low temperature solution combustion method [LCS]. The structural and morphological properties of the phosphors were studied by using Powder X-ray diffractometer (PXRD), Fourier transform infrared (FTIR), X-ray photo electron spectroscopy (XPS), scanning electron microscope (SEM) and transmission electron microscopy (TEM). TEM studies indicate that the size of the phosphor is ∼20-35 nm. Photoluminescence (PL) properties of Sm(3+) (1-11 mol%) doped CaTiO3 for NUV excitation (407 nm) was studied in order to investigate the possibility of its use in White light emitting diode (WLED) applications. The emission spectra consists of intra 4f transitions of Sm(3+), such as (4)G5/2→(6)H5/2 (561 nm), (4)G5/2→(6)H7/2 (601-611 nm), (4)G5/2→(6)H9/2 (648 nm) and (4)G5/2→(6)H11/2 (703 nm) respectively. Further, the emission at 601-611 nm show strong orange-red emission and can be applied to the orange-red emission of phosphor for the application for near ultra violet (NUV) excitation. Thermoluminescence (TL) of the samples irradiated with gamma source in the dose range 100-500 Gy was recorded at a heating rate of 5°Cs(-1). Two well resolved glow peaks at 164°C and 214°C along with shouldered peak at 186°C were recorded. TL intensity increases up to 300 Gy and thereafter, it decreases with further increase of dose. The kinetic parameters namely activation energy (E), frequency factor (s) and order of kinetics were estimated and results were discussed in detail.

Gd(1.96-x)Y(x)Eu0.04O3 (x = 0.0, 0.49, 0.98, 1.47, 1.96 mol%) nanophosphors: propellant combustion synthesis, structural and luminescence studies.

Gd(1.96-x)Y(x)Eu0.04O3 (x = 0.0, 0.49, 0.98, 1.47, 1.96 mol%) nanophosphors were synthesized by propellant combustion method at low temperature (400°C). The powder X-ray diffraction patterns of as formed Gd1.96Eu0.04O3 showed monoclinic phase, however with the addition of yttria it transforms from monoclinic to pure cubic phase. The porous nature increases with increase of yttria content. The particle size was estimated from Scherrer's and W-H plots which was found to be in the range 30-40 nm. These results were in well agreement with transmission electron microscopy studies. The optical band gap energies estimated were found to be in the range 5.32-5.49 eV. PL emission was recorded under 305 nm excitation show an intense emission peak at 611 nm along with other emission peaks at 582, 641 nm. These emission peaks were attributed to the transition of (5)D0→(7)FJ (J = 0, 1, 2, 3) of Eu(3+) ions. It was observed that PL intensity increases with increase of Y content up to x = 0.98 and thereafter intensity decreases. CIE color co-ordinates indicates that at x = 1.47 an intense red bright color can be achieved, which could find a promising application in flat panel displays. The cubic and monoclinic phases show different thermoluminescence glow peak values measured under identical conditions. The response of the cubic phase to the applied dose showed good linearity, negligible fading, and simple glow curve structure than monoclinic phase indicating that suitability of this phosphor in dosimetric applications.

Synthesis, characterization and spectroscopic investigation of Cr3+ doped wollastonite nanophosphor.

This work explores the preparation of nanocrystalline Cr(3+) (1-5 mol%) doped CaSiO3 phosphors by solution combustion process and study of its photoluminescence (PL) behavior. The nanopowders are well characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Fourier transform infra-red (FTIR) spectroscopy. PXRD results confirm monoclinic phase upon calcination at 950°C for 3h. SEM micrographs indicates that the powder is highly porous and agglomerated. The TEM images show the powder to consist of spherical shaped particles of size ∼30-60 nm. Upon 323 nm excitation, the emission profile of CaSiO3:Cr(3+) exhibits a narrow red emission peak at 641nm due to (2)E→(4)A2 transition and broad band at 722 nm due to (4)T2g→(4)A2g. It is observed that PL intensity increases with increase in Cr(3+) concentration and highest PL intensity is observed for 3 mol% doped sample. The PL intensity decreases with further increase in Cr(3+) doping. This decrease in PL intensity beyond 3 mol% is ascribed to concentration quenching. Racah parameters are calculated to describe the effects of electron-electron repulsion within the crystal lattice. The parameters show 21% reduction in the Racah parameter of free ion and the complex, indicating the moderate nephelauxetic effect in the lattice.