X-ray Spectroscopy Study of Defect Contribution to Lithium Adsorption on Porous Carbon.

Lithium adsorption on high-surface-area porous carbon (PC) nanomaterials provides superior electrochemical energy storage performance dominated by capacitive behavior. In this study, we demonstrate the influence of structural defects in the graphene lattice on the bonding character of adsorbed lithium. Thermally evaporated lithium was deposited in vacuum on the surface of as-grown graphene-like PC and PC annealed at 400 °C. Changes in the electronic states of carbon were studied experimentally using surface-sensitive X-ray photoelectron spectroscopy and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. NEXAFS data in combination with density functional theory calculations revealed the dative interactions between lithium sp2 hybridized states and carbon π*-type orbitals. Corrugated defective layers of graphene provide lithium with new bonding configurations, shorter distances, and stronger orbital overlapping, resulting in significant charge transfer between carbon and lithium. PC annealing heals defects, and as a result, the amount of lithium on the surface decreases. This conclusion was supported by electrochemical studies of as-grown and annealed PC in lithium-ion batteries. The former nanomaterial showed higher capacity values at all applied current densities. The results demonstrate that the lithium storage in carbon-based electrodes can be improved by introducing defects into the graphene layers.

Doping of Carbon Nanotubes with Encapsulated Phosphorus Chains.

Single-walled carbon nanotubes (SWCNTs) are a perfect host for the formation of one-dimensional phosphorus structures and to obtain hybrid materials with a large P-C ratio. This work presents a procedure for high-yield phosphorus filling of commercial Tuball SWCNTs and efficient removal of phosphorus deposits from the external nanotube surface. We probed white and red phosphorus as precursors, varied the synthesis temperature and the ampoule shape, and tested three solvents for sample purification. High-resolution transmission electron microscopy and Raman spectroscopy indicated crystallization of interior phosphorus in a form resembling fibrous red phosphorus. An aqueous sodium hydroxide solution allowed removing the majority of external phosphorus particles. Thermogravimetric analysis of the product determined ∼23 wt % (∼10 atom %) of phosphorus, and the X-ray photoelectron spectroscopy (XPS) data showed that ca. 80% of it is in the form of elemental phosphorus. Externally purified SWCNTs filled with phosphorus were used to study the interaction between the components. Raman spectroscopy and core-level XPS revealed p-type SWCNT doping. Valence-band XPS data and density functional theory calculations confirmed the transfer of the SWCNT electron density to the encapsulated phosphorus.

Single-Walled Carbon Nanotubes with Red Phosphorus in Lithium-Ion Batteries: Effect of Surface and Encapsulated Phosphorus.

Single-walled carbon nanotubes (SWCNTs) with their high surface area, electrical conductivity, mechanical strength and elasticity are an ideal component for the development of composite electrode materials for batteries. Red phosphorus has a very high theoretical capacity with respect to lithium, but has poor conductivity and expends considerably as a result of the reaction with lithium ions. In this work, we compare the electrochemical performance of commercial SWCNTs with red phosphorus deposited on the outer surface of nanotubes and/or encapsulated in internal channels of nanotubes in lithium-ion batteries. External phosphorus, condensed from vapors, is easily oxidized upon contact with the environment and only the un-oxidized phosphorus cores participate in electrochemical reactions. The support of the SWCNT network ensures a stable long-term cycling for these phosphorus particles. The tubular space inside the SWCNTs stimulate the formation of chain phosphorus structures. The chains reversibly interact with lithium ions and provide a specific capacity of 1545 mAh·g-1 (calculated on the mass of phosphorus in the sample) at a current density of 0.1 A·g-1. As compared to the sample containing external phosphorus, SWCNTs with encapsulated phosphorus demonstrate higher reaction rates and a slight loss of initial capacity (~7%) on the 1000th cycle at 5 A·g-1.

Laser Patterning of Aligned Carbon Nanotubes Arrays: Morphology, Surface Structure, and Interaction with Terahertz Radiation.

The patterning of arrays of aligned multi-walled carbon nanotubes (MWCNTs) allows creating metastructures for terahertz (THz) applications. Here, the strips and columns from MWCNTs vertically grown on silicon substrates are prepared using CO2 laser treatment. The tops of the patterned arrays are flat when the laser power is between 15 and 22 W, and craters appear there with increasing power. Laser treatment does not destroy the alignment of MWCNTs while removing their poorly ordered external layers. The products of oxidative destruction of these layers deposit on the surfaces of newly produced arrays. The oxygen groups resulting from the CO2 laser treatment improve the wettability of nanotube arrays with an epoxy resin. We show that the patterned MWCNT arrays absorb the THz radiation more strongly than the as-synthesized arrays. Moreover, the pattern influences the frequency behavior of the absorbance.

Hydrothermal Activation of Porous Nitrogen-Doped Carbon Materials for Electrochemical Capacitors and Sodium-Ion Batteries.

Highly porous nitrogen-doped carbon nanomaterials have distinct advantages in energy storage and conversion technologies. In the present work, hydrothermal treatments in water or ammonia solution were used for modification of mesoporous nitrogen-doped graphitic carbon, synthesized by deposition of acetonitrile vapors on the pyrolysis products of calcium tartrate. Morphology, composition, and textural characteristics of the original and activated materials were studied by transmission electron microscopy, X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, infrared spectroscopy, and nitrogen gas adsorption method. Both treatments resulted in a slight increase in specific surface area and volume of micropores and small mesopores due to the etching of carbon surface. Compared to the solely aqueous medium, activation with ammonia led to stronger destruction of the graphitic shells, the formation of larger micropores (1.4 nm vs 0.6 nm), a higher concentration of carbonyl groups, and the addition of nitrogen-containing groups. The tests of nitrogen-doped carbon materials as electrodes in 1M H2SO4 electrolyte and sodium-ion batteries showed improvement of electrochemical performance after hydrothermal treatments especially when ammonia was used. The activation method developed in this work is hopeful to open up a new route of designing porous nitrogen-doped carbon materials for electrochemical applications.

Factors Influencing the Performance of Pd/C Catalysts in the Green Production of Hydrogen from Formic Acid.

Formic acid derived from biomass is known to be used for hydrogen production over Pd catalysts. The effects of preparation variables, structure of the carbon support, surface functional composition on the state of Pd, and catalytic properties of the samples in the vapor-phase decomposition of formic acid were studied. In all catalysts derived from Pd acetate, metal particles visible by conventional TEM had similar sizes, but the adsorption capacity towards CO responded strongly to N-doping of the carbon surface. Moreover, a decrease in the CO/Pd values was accompanied by a significant increase in the reaction rate. Taking account of X-ray photoelectron spectroscopy (XPS) and atomic resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF/STEM) data, the trends observed were assigned to a larger fraction of single electron-deficient Pd atoms in the N-doped samples, which do not adsorb CO but interact with formic acid to produce hydrogen. This was confirmed by extended DFT studies. The obtained results are valuable for the development of Pd catalysts on carbon supports for different processes.