Anthracene scaffold as highly selective chemosensor for Al3+ and its AIEE activity.

Fluorescent chemosensor, 3-(Anthracen-2-yliminomethyl)-benzene-1,2-diol (ANB) has been synthesized by one-step condensation of 2-aminoanthracene and 2,3-dihydroxybenzaldehyde and characterized using 1H-NMR, FT-IR and Mass spectroscopic techniques. The probe ANB was found to be an efficient 'turn-on' fluorescence chemosensor for the selective detection of Al3+ ion over other metal ions in an aqueous solution. The chemosensor exhibits ~ 27-fold enhancement of emission intensity in presence of Al3+ ion. Fluorescence quantum values for ANB and (Al3+-ANB)-complex are 0.004 and 0.097, respectively. In addition, the binding constant and the limit of detection were found to be 1.22 × 104 M-1 and 0.391 µM, respectively. The chemosensor ANB binds to Al3+ ions in 2:1 stoichiometric ratio which was supported by Job's plot, 1H-NMR titration and florescence titration. Fluorescence reversibility of the sensor complex was well established by adding EDTA in the same condition and a molecular INHIBIT logic gate was fabricated using this reversible nature of the sensor complex. Additionally, the chemosensor ANB shows a novel aggregation-induced enhanced emission phenomenon, where the aggregate hydrosol of ANB shows enhance emission intensity.

Highly Sensitive 'on-off' Pyrene Based AIEgen for Selective Sensing of Copper (II) Ions in Aqueous Media.

A Fluorescent chemosensor based on pyrene scaffold, 5-diethylamino-2-(pyren-1-yliminomethyl)-phenol (PDS) is synthesized using condensation method. It displays novel aggregation-induced emission (AIE) phenomena in its aggregated/solid state. The AIE characteristic of PDS is studied in CH3CN/H2O mixtures at different volume percentage of water and morphology of the aggregated particles are investigated by DLS and optical fluorescence microscopic study. The probe is aggregated into ordered one-dimensional (1-D) rod like microcrystals and exhibit high efficiency of solid-state emission with green colour. By taking advantage of its interesting AIE feature, the aggregated hydrosol has been utilized as 'off-on' type fluorescence switching chemosensor with superb selectivity and sensitivity towards Cu2+ions and the limit of detection (LOD) was calculated as low as 6.3 µM. A high Stern-Volmer quenching constant was estimated to be 2.88 × 105 M-1. The proposed chemosensor with AIE feature reveals a prospective view for the on-site visual recognition of Cu2+ ions in fluorescent paper strips and the synthesized probe is also exploited to find out the concentration of Cu2+ions in real water samples.

Designed Synthesis of Fluorescence 'Turn-on' Dual Sensor for Selective Detection of Al3+ and Zn2+ in Water.

1-(Pyridin-2-yl-hydrazonomethyl)-naphthalen-2-ol (PNOH) is a naphthalene-based fluorescence dual chemo-sensor for Al3+ and Zn2+. The probe (PNOH) is spectroscopically characterised and the chemo-sensing mechanism has been demonstrated through 1H NMR, absorption and both steady state and time resolved fluorescence study. The 'turn-on' luminescence property of PNOH is used for the selective detection of trace amount of Al3+and Zn2+via chelation enhanced fluorescence (CHEF) through complex formation. The 1:1 stoichiometry of each sensor-metal complex is observed from Job's plot based on UV-Vis titration. Most promising advantage of the probe (PNOH) is its application in the one-pot detection of Al3+ (λem- 460 nm) and Zn2+ (λem- 510 nm) exciting at same wavelength (λex- 420 nm) while high intense emission appears at two different wavelengths. Limit of detection (LOD) of PNOH towards Al3+ & Zn2+ are found to be 60 nM & 365 nM respectively. Real water sample analysis has also been demonstrated by using the probe PNOH.

An antipyrine based fluorescent probe for distinct detection of Al3+ and Zn2+ and its AIEE behaviour.

A simple antipyrine based fluorescent probe, 4-[(2-hydroxy-3-methoxy-benzylidene)-amino]-1,5-dimethyl-2-phenyl-1,2-dihydro-pyrazol-3-one (OVAP), has been successfully synthesized using a one-step condensation method. It exhibits dual sensing properties toward Al3+ and Zn2+ in the presence of other relevant metal ions and also displays novel aggregation induced emission enhancement (AIEE) characteristics in its aggregated/solid state. Aggregated OVAP microstructures with interesting morphologies have been synthesized using SDS as a morphology directing agent. Morphologies of the particles are characterized using optical microscopy. Photophysical properties of the as-synthesized OVAP hydrosol are studied using UV-Vis absorption, steady state and time resolved fluorescence spectroscopy. The 'turn on' luminescence property of OVAP is used for the selective detection of trace amounts of Al3+ and Zn2+ and a significant turn on fluorescence enhancement over ∼100-fold is triggered via chelation-enhanced fluorescence (CHEF) through complex formation. The 1 : 1 stoichiometry of each sensor metal ion complex is observed from Job's plot based on UV-Vis absorption titration. The LODs for Al3+ and Zn2+ are found to be 1.05 nM and 2.35 nM, respectively. Notably, the sensor, OVAP, is further demonstrated using a molecular INHIBIT logic gate.

An antipyrine based fluorescence "turn-on" dual sensor for Zn2+ and Al3+ and its selective fluorescence "turn-off" sensing towards 2,4,6-trinitrophenol (TNP) in the aggregated state.

A 2,6-diformyl-p-cresol (DFC)-4-amino antipyrine (AP) based dual signaling fluorescent Schiff base ligand (DFCAP) is found to exhibit colorimetric and fluorescence turn on selective sensing towards metal ions, Zn2+ and Al3+. It also exhibits a significant aggregation induced emission (AIE) phenomenon by controlling the water-THF solvent ratio which provides robust green emissive fluorogenic aggregates with well-defined morphologies. Turn-on fluorescence enhancements as high as 195 fold and 168 fold in methanol for Al3+ and Zn2+ at 480 nm and 508 nm, respectively, were noticed. The binding constants and stoichiometry determined from the fluorescence titration data are K = 7.63 × 104 M-1 and 3.42 × 104 M-1 and 1 : 1 complexation for both Al3+ and Zn2+ respectively, supported by Job's method. DFCAP shows high sensitivity towards the detection of Zn2+ and Al3+ ions with very low detection limit values of ca. ∼21 nM and 30 nM respectively. Besides by applying its attractive AIE feature, the green emissive hydrosol functions as a good chemosensor with high sensitivity for a selected explosive TNP through ground state complexation with a LOD value of ca. ∼1.74 µM and especially a high Stern-Volmer quenching constant of ca. ∼4.14 × 105 M-1. For instant 'naked eye' response for the trace detection of TNP in the solution state, we fabricated a simple paper strip that could detect TNP on-site in a fast, inexpensive and simple way.

Rhodamine scaffolds as real time chemosensors for selective detection of bisulfite in aqueous medium.

Rhodamine and its derivatives have been widely used in designing fluorescent 'turn on' cation sensors, while very few rhodamine based fluorescent probes have been reported to date for the detection of anions in water. In this article, a new rhodamine based facile and convenient 'turn on' fluorescent chemosensor 2-(2-(1-hydroxynaphthyllideneamino)ethyl)-3',6'-bis(diethylamino)spiro [isoindoline-1,9'-xanthen]-3-one (RAHN) has been developed by Schiff base condensation and characterized by standard techniques for selective detection of bisulfite anions in water. A faintly yellow colour solution of RAHN turns pink upon addition of bisulfite. Again RAHN is weakly emissive in solution but becomes strongly emissive on addition of bisulfite and the emission intensity increases gradually in the presence of increasing concentration of bisulfite. No other analytes can cause emission enhancement of RAHN, suggesting the selectivity of the probe towards bisulfite. The detection limit for bisulfite was found to be ∼0.4 µM.

Crystal induced phosphorescence from Benz(a)anthracene microcrystals at room temperature.

Pure organic compounds that are also phosphorescent at room temperature are very rare in literature. Here, we report efficient phosphorescence emission from aggregated hydrosol of Benz(a)anthracene (BaA) at room temperature. Aggregated hydrosol of BaA has been synthesized by re-precipitation method and SDS is used as morphology directing agent. Morphology of the particles is characterized using optical and scanning electronic microcopy (SEM). Photophysical properties of the aggregated hydrosol are carried out using UV-vis, steady state and time resolved fluorescence study. The large stoke shifted structured emission from aggregated hydrosol of BaA has been explained due to phosphorescence emission of BaA at room temperature. In the crystalline state, the restricted intermolecular motions (RIM) such as rotations and vibrations are activated by crystal lattice. This rigidification effect makes the chromophore phosphorescent at room temperature. The possible stacking arrangement of the neighboring BaA within the aggregates has been substantiated by computing second order Fukui parameter as local reactivity descriptors. Computational study also reveals that the neighboring BaA molecules are present in parallel slipped conformation in its aggregated crystalline form.

Proton triggered emission and selective sensing of picric acid by the fluorescent aggregates of 6,7-dimethyl-2,3-bis-(2-pyridyl)-quinoxaline.

A heteroatom containing organic fluorophore 6,7-dimethyl-2,3-bis-(2-pyridyl)-quinoxaline (BPQ) is weakly emissive in solution but its emission properties are highly enhanced in the aggregated state due to the restriction of intramolecular rotation (RIR) and large amplitude vibrational modes, demonstrating the phenomenon, aggregation induced emission enhancement (AIEE). It has strong proton capture capability, allowing reversible fluorescence switching in basic and acidic medium and the emission color changes from blue to green in the aggregated state through protonation. It has been explained as a competition between intramolecular charge transfers (ICTs) and the AIEE phenomena at a lower pH range (pH ∼1-4). Such behavior enables it as a fluorescent pH sensor for detection in acidic and basic medium. Morphologies of the particles are characterized using optical and field emission scanning electron microscopic (FESEM) studies. The turn off fluorescence properties of aggregated BPQ have been utilized for the selective detection of picric acid and the fluorescence quenching is explained due to ground state complexation with a strong quenching constant, 7.81 × 10(4) M(-1).

Pyrene Scaffold as Real-Time Fluorescent Turn-on Chemosensor for Selective Detection of Trace-Level Al(III) and Its Aggregation-Induced Emission Enhancement.

A pyrene based fluorescent probe, 3-methoxy-2-((pyren-2yl-imino)methyl)phenol (HL), was synthesized via simple one-pot reaction from inexpensive reagents. It exhibited high sensitivity and selectivity toward Al(3+) over other relevant metal ions and also displayed novel aggregation-induced emission enhancement (AIEE) characteristics in its aggregate/solid state. When bound with Al(3+) in 1:1 mode, a significant fluorescence enhancement with a turn-on ratio of over ∼200-fold was triggered via chelation-enhanced fluorescence through sensor complex (Al-L) formation, and amusingly excess addition of Al(3+), dramatic enhancement of fluorescence intensity over manifold through aggregate formation was observed. The 1:1 stoichiometry of the sensor complex (Al-L) was calculated from Job's plot based on UV-vis absorption titration. In addition, the binding site of sensor complex (Al-L) was well-established from the (1)H NMR titrations and also supported by the fluorescence reversibility by adding Al(3+) and EDTA sequentially. Intriguingly, the AIEE properties of HL may improve its impact and studied in CH3CN-H2O mixtures at high water content. To gain insight into the AIEE mechanism of the HL, the size and growth process of particles in different volume percentage of water and acetonitrile mixture were studied using time-resolved photoluminescence, dynamic light scattering, optical microscope, and scanning electron microscope. The molecules of HL are aggregated into ordered one-dimensional rod-shaped microcrystals that show obvious optical waveguide effect.

Methylene bridge regulated geometrical preferences of ligands in cobalt(III) coordination chemistry and phenoxazinone synthase mimicking activity.

Two new azide bound cobalt(III) complexes, [Co(L(1))(N3)3] (fac-1) and [Co(L(2))(N3)3] (mer-2), where L(1) is bis(2-pyridylmethyl)amine and L(2) is (2-pyridylmethyl)(2-pyridylethyl)amine, derived from tridentate reduced Schiff-base ligands have been reported. Interestingly, a methylene bridge regulated preferential coordination mode of ligands is noticed in their crystal structures: it is found in a facial arrangement in fac-1 and has a meridional disposition in mer-2. Both complexes show phenoxazinone synthase-like activity and the role of the structural factor on the catalytic activity is also explored. Moreover, the easily reducible cobalt(III) center in mer-2 favors the oxidation of o-aminophenol. The ESI-MS positive spectra together with UV-vis spectroscopy clearly suggest the formation of a catalyst-substrate adduct by substitution of the coordinated azide ions in the catalytic cycle.