RESUMO
Using a mechanical synthesis method in the form of ball milling and an additional annealing step, a novel and accelerated route for the synthesis of the thiospinels toyohaite (Ag2FeSn3S8) and rhodostannite (Cu2FeSn3S8) was discovered. Both thiospinels display faradaic efficiencies of up to 73% for CO2 reduction to CO using an organic electrolyte in an H-type cell. The materials were furthermore implemented in a zero-gap electrolyzer, with toyohaite producing 22% CO and 52% H2 at 100 mA cm-2 and rhodostannite 28% CO and 37% H2. The catalytically active sites are studied using density functional theory, revealing strong CO binding interactions on both Ag and Cu, whereas Sn is found to contribute to the decomposition of Ag2FeSn3S8 and Cu2FeSn3S8 by coordination with oxygen. Postmortem analysis of the thiospinel-based electrodes by means of SEM-EDX, XRD, XPS, and Mössbauer spectroscopy showed sulfur leaching from the catalysts after applying 100 mA cm-2. These spectroscopic results-in conjunction with DFT calculations of the oxidized surfaces-suggest that the catalytically active species consists of metal oxides. As a conversion of the metal sulfides into the corresponding metallic species was observed via XRD, the decomposition pathways of both catalysts were also computed using DFT; thus, elucidating the energetically most favorable decomposition products and expanding the possible composition of the catalysts postelectrolysis.
RESUMO
Electrocatalytic hydrogenations (ECH) enable the reduction of organic substrates upon usage of electric current and present a sustainable alternative to conventional processes if green electricity is used. Opposed to most current protocols for electrode preparation, this work presents a one-step binder- and additive-free production of silver- and copper-electroplated electrodes. Controlled adjustment of the preparation parameters allows for the tuning of catalyst morphology and its electrochemical properties. Upon optimization of the deposition protocol and carbon support, high faradaic efficiencies of 93 % for the ECH of the Vitaminâ A- and E-synthon 2-methyl-3-butyn-2-ol (MBY) are achieved that can be maintained at current densities of 240â mA cm-2 and minimal catalyst loadings of 0.2â mg cm-2, corresponding to an unmatched production rate of 1.47â kgMBE gcat -1 h-1. For a continuous hydrogenation process, the protocol can be directly transferred into a single-pass operation mode giving a production rate of 1.38â kgMBE gcat -1 h-1. Subsequently, the substrate spectrum was extended to a total of 17â different C-C-, C-O- and N-O-unsaturated compounds revealing the general applicability of the reported process. Our results lay an important groundwork for the development of electrochemical reactors and electrodes able to directly compete with the palladium-based thermocatalytic state of the art.
RESUMO
We have utilized carbon sources as milling additives to enable a direct mechanochemical one-pot synthesis of Fe3Co3Ni3S8/carbon (Pn/C) materials using elemental reaction mixtures. The obtained Pn/C materials are thoroughly characterized and their carbon content could be adjusted up to 50 wt%. In addition to carbon black (CB) as an additive, Pn/C materials were produced using graphite, reduced graphene oxide (rGO), and carbon nanotubes (CNTs), which allows the overall physicochemical properties of materials for energy storage applications to be adjusted. By employing the Pn/C materials as electrocatalysts for the HER in a zero-gap proton exchange membrane (PEM) electrolyzer, we were able to reach a current density of 1 A cm-2 at a cell potential as low as 2.12 V using Pn, which was synthesized with 25 wt% CB. Furthermore, electrolysis at an applied current density of 1 A cm-2 for 100 h displays a stable performance, thus providing a sustainable synthesis procedure for potential future energy storage applications. Herein, we show that catalyst supports play an important role in the overall performance.
RESUMO
Electrochemical hydrogenation reactions gained significant attention as a sustainable and efficient alternative to conventional thermocatalytic hydrogenations. This tutorial review provides a comprehensive overview of the basic principles, the practical application, and recent advances of electrochemical hydrogenation reactions, with a particular emphasis on the translation of these reactions from lab-scale to industrial applications. Giving an overview on the vast amount of conceivable organic substrates and tested catalysts, we highlight the challenges associated with upscaling electrochemical hydrogenations, such as mass transfer limitations and reactor design. Strategies and techniques for addressing these challenges are discussed, including the development of novel catalysts and the implementation of scalable and innovative cell concepts. We furthermore present an outlook on current challenges, future prospects, and research directions for achieving widespread industrial implementation of electrochemical hydrogenation reactions. This work aims to provide beginners as well as experienced electrochemists with a starting point into the potential future transformation of electrochemical hydrogenations from a laboratory curiosity to a viable technology for sustainable chemical synthesis on an industrial scale.
RESUMO
The tetradentate azamacrocycle cyclam (=1,4,8,11-tetraazacyclotetradecane) was studied profoundly for the coordination of transition metal ions, and the resulting complexes were investigated extensively for their catalytic performance in, e.g., O2 activation and electrocatalytic CO2 reduction. Although the successful synthesis of analogous P4 macrocycles was described earlier, no tetradentate N,P mixed 14-membered macrocycles have been prepared to date and their chemistry remains elusive. Thus, in this work, we showcase the synthesis of phospha-aza mixed cyclam-based macrocycles by selectively "exchanging" one or two secondary amines in the macrocycle isocyclam (=1,4,7,11-tetraazacyclotetradecane) with tertiary phosphines. In addition, we herein present the preparation of the corresponding nickel complexes along with their complex chemical and structural characterization to provide first coordination studies.
Assuntos
Ciclamos , Elementos de Transição , Níquel/química , Fósforo , Modelos Moleculares , Elementos de Transição/químicaRESUMO
Electrosynthetic methods are crucial for a future sustainable transformation of the chemical industry. Being an integral part of many synthetic pathways, the electrification of hydrogenation reactions gained increasing interest in recent years. However, for the large-scale industrial application of electrochemical hydrogenations, low-resistance zero-gap electrolysers operating at high current densities and high substrate concentrations, ideally applying noble-metal-free catalyst systems, are required. Because of their conductivity, stability, and stoichiometric flexibility, transition metal sulfides of the pentlandite group have been thoroughly investigated as promising electrocatalysts for electrochemical applications but were not investigated for electrochemical hydrogenations of organic materials. An initial screening of a series of first row transition metal pentlandites revealed promising activity for the electrochemical hydrogenation of alkynols in water. The most active catalyst within the series was then incorporated into a zero-gap electrolyser enabling the hydrogenation of alkynols at current densities of up to 240 mA cm-2, Faraday efficiencies of up to 75%, and an alkene selectivity of up to 90%. In this scalable setup we demonstrate high stability of catalyst and electrode for at least 100 h. Altogether, we illustrate the successful integration of a sustainable catalyst into a scalable zero-gap electrolyser establishing electrosynthetic methods in an application-oriented manner.
RESUMO
We report on synthesis of the heterotrimetallic pentlandite-type material Fe3Co3Ni3S8 (FCNS) in presence of suitable phosphorus-(FCNSP) and nitrogen-(FCNSN) donors for the overall electrochemical water splitting. Throughout the experiments, a preferential incorporation of N into the FCNS-lattice is observed whereas the addition of phosphorus generally leads to metal-phosphate-FCNS composites. The obtained FCNSP, FCNSN, and FCNSNP facilitate the oxygen evolution reaction (OER) at 100 mAcm-2 in 1.0M KOH with overpotentials of 479, 440, and 427 mV, respectively, outperforming the benchmark IrO2 (564 mV) and commercial Ni metal powder (>600 mV). Likewise, FCNSN and FCNSNP reveal an improved performance toward the hydrogen evolution reaction (HER) in 0.5M H2SO4, outperforming the pristine FCNS. All materials revealed high stability and morphological robustness during OER and HER. Notably, DFT calculation suggests that N and P doping boost the OER activity of the pristine FCNS, whereas N doping enhances the HER activity.
RESUMO
For the efficient electrochemical conversion of CO2 into valuable chemical feedstocks, a well-coordinated interaction of all electrolyzer compartments is required. In addition to the catalyst, whose role is described in detail in the part "Electrochemical CO2 Reduction toward Multicarbon Alcohols - The Microscopic World of Catalysts & Process Conditions" of this divided review, the general cell setups, design and manufacture of the electrodes, membranes used, and process parameters must be optimally matched. The authors' goal is to provide a comprehensive review of the current literature on how these aspects affect the overall performance of CO2 electrolysis. To be economically competitive as an overall process, the framework conditions, i.e., CO2 supply and reaction product treatment must also be considered. If the key indicators for current density, selectivity, cell voltage, and lifetime of a CO2 electrolyzer mentioned in the techno-economic consideration of this review are met, electrochemical CO2 reduction can make a valuable contribution to the creation of closed carbon cycles and to a sustainable energy economy.
RESUMO
Tackling climate change is one of the undoubtedly most important challenges at the present time. This review deals mainly with the chemical aspects of the current status for converting the greenhouse gas CO2 via electrochemical CO2 reduction reaction (CO2RR) to multicarbon alcohols as valuable products. Feasible reaction routes are presented, as well as catalyst synthesis methods such as electrodeposition, precipitation, or sputtering. In addition, a comprehensive overview of the currently achievable selectivities for multicarbon alcohols in CO2RR is given. It is also outlined to what extent, for example, modifications of the catalyst surfaces or the use of bifunctional compounds the product distribution is shifted. In addition, the influence of varying electrolyte, temperature, and pressure is described and discussed.
RESUMO
Recently, pentlandite materials have been shown to exhibit promising properties with respect to the hydrogen evolution reaction (HER). A whole series of trimetallic FeCoNi-pentlandite materials and composites have been synthesized from the elements using high-temperature synthesis and categorized in terms of purity. Furthermore, the electrocatalytic properties regarding the HER were determined and correlated to hydrogen adsorption energies, which were determined by means of density functional theory (DFT) calculations. The relationships between activity and its origin generated in this way help to better understand the pentlandite system and provide meaningful approaches for catalyst synthesis.
RESUMO
Bis-tren (tren = tris(2-aminoethyl)amine) azacryptands were previously studied profoundly for the coordination of two +II metals and subsequent binding of substrates within their cavity. Likewise, cryptates including metals in different oxidations states were reported with the rather unstable hexa-imine analogues but also revealed only little stability. In this work, we report the synthesis of an asymmetric hexa-amine cryptand analogue by selectively exchanging three of the secondary amines of one binding site with sulphur atoms. We show that the presence of two distinct binding sites allows for the selective formation of stable dinuclear complexes of metals with different oxidation numbers and present the formation of distinct CuICoII, CuINiII and CuICuIII cryptates.
RESUMO
The growing societal and political focus on the use of environmentally friendly technologies has led to an ever-increasing interest in electrolysis technologies in the scientific communities. This development is reflected by the plethora of candidate catalysts for the hydrogen and oxygen evolution reactions, as well as the CO2 reduction reaction, reported in the literature. However, almost none of them entered the stage of application yet. Likewise, the reports on process engineering inadequately address the utilization of these catalysts, as well as electrode and cell concepts, that might be suitable for the market. Evidently, a closer collaboration between chemists and engineers from industry and academia is desirable to speed up the development of these disruptive technologies. Herein, we elucidate the critical parameters and highlight the necessary aspects to accelerate the development of industrially relevant catalysts capable of fulfilling the forthcoming challenges related to energy conversion and storage. The aim of this Perspective, composed by industrial and academic partners, is to critically question current undertakings and to encourage researchers to strike interdisciplinary research pathways.
RESUMO
Complexes of RhI and IrI of the [M(COD)(NHC)X] type (where M=Rh or Ir, COD=1,5-cyclooctadiene, NHC=N-heterocyclic carbene, and X=halide) have recently shown promising cytotoxic activities against several cancer cell lines. Initial mechanism of action studies provided some knowledge about their interaction with DNA and proteins. However, information about their cellular localization remains scarce owing to luminescence quenching within this complex type. Herein, the synthesis of two rare examples of luminescent RhI and IrI [M(COD)(NHC)I] complexes with 1,8-naphthalimide-based emitting ligands is reported. All new complexes are comprehensively characterized, including with single-crystal X-ray structures. Steric crowding in one derivative leads to two distinct rotamers in solution, which apparently can be distinguished both by pronounced NMR shifts and by their respective spectral and temporal emission signatures. When the photophysical properties of these new complexes are exploited for cellular imaging in HT-29 and PT-45 cancer cell lines, it is demonstrated that the complexes accumulate predominantly in the endoplasmic reticulum, which is an entirely new finding and provides the first insight into the cellular localization of such IrI (NHC) complexes.
Assuntos
Irídio , Compostos Organometálicos , Retículo Endoplasmático , Luminescência , Metano/análogos & derivados , Estrutura MolecularRESUMO
While hydrogen plays an ever-increasing role in modern society, nature has utilized hydrogen since a very long time as an energy carrier and storage molecule. Among the enzymatic systems that metabolise hydrogen, [FeFe]-hydrogenases are one of the most powerful systems to perform this conversion. In this light, we will herein present an overview on developments in [FeFe]-hydrogenase research with a strong focus on synthetic mimics and their application within the native enzymatic environment. This review spans from the biological assembly of the natural enzyme and the highly controversial discussed mechanism for the hydrogen generation to the synthesis of multiple mimic platforms as well as their electrochemical behaviour.
Assuntos
Materiais Biomiméticos/metabolismo , Hidrogenase/metabolismo , Materiais Biomiméticos/química , Catálise , Clostridium/enzimologia , Complexos de Coordenação/química , Complexos de Coordenação/metabolismo , Hidrogênio/química , Hidrogênio/metabolismo , Hidrogenase/química , Hidrogenase/genética , Metais/química , Mutagênese Sítio-DirigidaRESUMO
The electrochemical reduction of CO2 is an attractive strategy towards the mitigation of environmental pollution and production of bulk chemicals as well as fuels by renewables. The bimetallic sulfide Fe4.5 Ni4.5 S8 (pentlandite) was recently reported as a cheap and robust catalyst for electrochemical water splitting, as well as for CO2 reduction with a solvent-dependent product selectivity. Inspired by numerous reports on monometallic sulfoselenides and selenides revealing higher catalytic activity for the CO2 reduction reaction (CO2 RR) than their sulfide counterparts, the authors investigated the influence of stepwise S/Se exchange in seleno-pentlandites Fe4.5 Ni4.5 S8-Y SeY (Y=1-5) and their ability to act as CO2 reducing catalysts. It is demonstrated that the incorporation of higher equivalents of selenium favors the CO2 RR with Fe4.5 Ni4.5 S4 Se4 revealing the highest activity for CO formation. Under galvanostatic conditions in acetonitrile, Fe4.5 Ni4.5 S4 Se4 generates CO with a Faradaic Efficiency close to 100 % at applied current densities of -50â mA cm-2 and -100â mA cm-2 . This work offers insight into the tunability of the pentlandite based electrocatalysts for the CO2 reduction reaction.
RESUMO
In recent years, metal-rich sulfides of the pentlandite type (M9S8) have attracted considerable attention for energy storage applications. However, common synthetic routes towards pentlandites either involve energy intensive high temperature procedures or solvothermal methods with specialized precursors and non-sustainable organic solvents. Herein, we demonstrate that ball milling is a simple and efficient method to synthesize nanosized bimetallic pentlandite particles (Fe4.5Ni4.5S8, Pn) with an average size of ca. 250 nm in a single synthetic step from elemental- or sulfidic mixtures. We herein highlight the effects of the milling ball quantity, precursor types and milling time on the product quality. Along this line, Raman spectroscopy as well as temperature/pressure monitoring during the milling processes provide valuable insights into mechanistic differences between the mechanochemical Pn-formation. By employing the obtained Pn-nanosized particles as cathodic electrocatalysts for water splitting in a zero-gap PEM electrolyzer we provide a comprehensive path for a potential sustainable future process involving non-noble metal catalysts.
RESUMO
We herein present a series of hitherto unprecedented seleno-pentlandites (Fe4.5Ni4.5S8-YSeY). By analysing the influence of S/Se exchange on the catalyst structure and activity in the electrochemical hydrogen evolution reaction we herein showcase the potential and limitations of homologous S/Se exchanges within pentlandite HER catalysts.
RESUMO
The efficient reduction of protons by non-noble metals under mild conditions is a challenge for our modern society. Nature utilises hydrogenases, enzymatic machineries that comprise iron- and nickel- containing active sites, to perform the conversion of protons to hydrogen. We herein report a straightforward synthetic pathway towards well-defined particles of the bio-inspired material FexNi9-xS8, a structural and functional analogue of hydrogenase metal sulfur clusters. Moreover, the potential of pentlandites to serve as photocatalysts for solar-driven H2-production is assessed for the first time. The FexNi9-xS8 materials are visible light responsive (band gaps between 2.02 and 2.49 eV, depending on the pentlandite's Fe : Ni content) and display a conduction band energy close to the thermodynamic potential for proton reduction. Despite the limited driving force, a modest activity for photocatalytic H2 has been observed. Our observations show the potential for the future development of pentlandites as photocatalysts. This work provides a basis to explore powerful synergies between biomimetic chemistry and material design to unlock novel applications in solar energy conversion.
RESUMO
The electrocatalytic reduction of carbon dioxide (CO2RR) to valuable bulk chemicals is set to become a vital factor in the prevention of environmental pollution and the selective storage of sustainable energy. Inspired by structural analogues to the active site of the enzyme CODHNi, we envisioned that bulk Fe/Ni sulfides would enable the efficient reduction of CO2. By careful adjustment of the process conditions, we demonstrate that pentlandite (Fe4.5Ni4.5S8) electrodes, in addition to HER, also support the CO2RR reaching a peak faradaic efficiency of 87% and 13% for the formation of CO and methane, respectively at 3 mA cm-2. The choice of solvent, the presence of water/protons and CO2 solubility are identified as key-properties to adjust the balance between HER and CO2RR in favour of the latter. Such experiments can thus serve as model reactions to elucidate a potential catalyst within gas diffusion electrodes.
RESUMO
Three new Ru(ii) bioconjugates with the C-terminal hexapeptide sequence of neurotensin, RRPYIL, namely trans,cis-RuCl2(CO)2(cppH-RRPYIL-κNp) (7), [Ru([9]aneS3)(cppH-RRPYIL-κNp)(PTA)](Cl)2 (8), and [Ru([9]aneS3)Cl(cppH-RRPYIL-κNp)]Cl (11), where cppH is the asymmetric linker 2-(2'-pyridyl)pyrimidine-4-carboxylic acid, were prepared in pure form and structurally characterized in solution. The cppH linker is capable of forming stereoisomers (i.e. linkage isomers), depending on whether the nitrogen atom ortho (No) or para (Np) to the carboxylate on C4 in the pyrimidine ring binds the metal ion. Thus, one of the aims of this work was to obtain pairs of stereoisomeric conjugates and investigate their biological (anticancer, antibacterial) activity. A thorough NMR characterization clearly indicated that in all cases exclusively Np conjugates were obtained in pure form. In addition, the NMR studies showed that, whereas in DMSO-d6 each conjugate exists as a single species, in D2O two (7) or even three if not four (8 and 11) very similar stable species form (each one corresponding to an individual compound). Similar results were observed for the cppH-RRPYIL ligand alone. Overall, the NMR findings are consistent with the occurrence of a strong intramolecular stacking interaction between the phenol ring of tyrosine and the pyridyl ring of cppH. Such stacking interactions between aromatic rings are expected to be stronger in water. This interaction leads to two stereoisomeric species in the free cppH-RRPYIL ligand and in the bioconjugate 7, and is somehow modulated by the less symmetrical Ru coordination environments in 8 and 11, affording three to four very similar species.