Magnetic solid-phase extraction based on restricted-access molecularly imprinted polymers for ultrarapid determination of ractopamine residues from food samples by capillary electrophoresis.

An ultrafast, efficient, and eco-friendly method combining magnetic solid phase extraction and capillary electrophoresis with diode array detection have been developed to determine ractopamine residues in food samples. A restricted access material based on magnetic and mesoporous molecularly imprinted polymer has been properly synthesized and characterized, demonstrating excellent selectivity and high adsorbent capacity. Short-end injection capillary electrophoresis method was optimized: 75 mM triethylamine pH 7 as BGE, -20 kV, 50 mbar by hydrodynamic injection during 8 s, and capillary temperature at 25 °C; reaching ultrafast ractopamine analysis (∼0.6 min) with good peak asymmetry, and free from interfering and/or baseline noise. After sample preparation optimization, the conditions were: 1000 µL of sample at pH 6, 20 mg of adsorbent, stirring time of 120 s, 250 µL of ultrapure water as washing solvent, 1000 µL of methanol: acetic acid (7: 3, v/v) as eluent, and the adsorbent can be reused four times. In these conditions, the analytical method showed recoveries around to 100 %, linearity ranged from 9.74 to 974.0 µg kg-1, correlation coefficient (r) ≥ 0,99 in addition to adequate precision, accuracy, and robustness. After proper validation, the method was successfully applied in the analysis ractopamine residues in bovine milk and bovine and porcine muscle.

Magnetic and mesoporous molecularly imprinted polymer synthesized by rational computation design: Sample preparation and analysis of ractopamine.

Through density functional theory calculations was studied theoretically the formation process of a magnetic and mesoporous molecularly imprinted polymer for ractopamine (RAC), evaluating the molecular electrostatic potential map, functional monomers, functional monomer / template stoichiometry and crosslink agents. The results revealed that the best conditions for the synthesis were established with acrylic acid as functional monomer in a 1: 4 stoichiometry using acetonitrile as the solvent and ethylene glycol dimethacrylate as crosslink agent. It was observed that nine hydrogen bonds established between the RAC and acrylic acid play a key role on the pre-polymerization complex. In addition, three analytical methods using HPLC, UHPLC and CE instruments were optimized for rapid analysis. The adsorbent was experimentally synthesized considering the best conditions found at the molecular level and characterized by FTIR, DRX, TGA, SEM, TEM, surface analysis, and wettability. After that, the synthesized material was used in magnetic solid phase extraction combined with capillary electrophoresis in a preliminary RAC recovery study from milk samples. Finally, greenness metric with a score of 0.55 have been obtained for the sample preparation procedure using the online AGREEprep metric.

Molecularly imprinted polymers as a selective sorbent for forensic applications in biological samples-a review.

Molecularly imprinted polymers (MIP) consist of a molecular recognition technology with applicability in different areas, including forensic chemistry. Among the forensic applications, the use of MIP in biological fluid analysis has gained prominence. Biological fluids are complex samples that generally require a pre-treatment to eliminate interfering agents to improve the results of the analyses. In this review, we address the development of this molecular imprinting technology over the years, highlighting the forensic applications of molecularly imprinted polymers in biological sample preparation for analysis of stimulant drugs such as cocaine, amphetamines, and nicotine.

Chiral Capillary Electrokinetic Chromatography: Principle and Applications, Detection and Identification, Design of Experiment, and Exploration of Chiral Recognition Using Molecular Modeling.

This work reviews the literature of chiral capillary electrokinetic chromatography from January 2016 to March 2021. This is done to explore the state-of-the-art approach and recent developments carried out in this field. The separation principle of the technique is described and supported with simple graphical illustrations, showing migration under normal and reversed polarity modes of the separation voltage. The most relevant applications of the technique for enantioseparation of drugs and other enantiomeric molecules in different fields using chiral selectors in single, dual, or multiple systems are highlighted. Measures to improve the detection sensitivity of chiral capillary electrokinetic chromatography with UV detector are discussed, and the alternative aspects are explored, besides special emphases to hyphenation compatibility to mass spectrometry. Partial filling and counter migration techniques are described. Indirect identification of the separated enantiomers and the determination of enantiomeric migration order are mentioned. The application of Quality by Design principles to facilitate method development, optimization, and validation is presented. The elucidation and explanation of chiral recognition in molecular bases are discussed with special focus on the role of molecular modeling.

Magnetic molecularly imprinted conducting polymer for determination of praziquantel enantiomers in milk.

A new selective adsorbent based on magnetic molecularly imprinted conducting polymer was firstly synthetized and applied to the magnetic solid phase extraction (MSPE) for the determination of PZQ enantiomers in milk samples. The enantioselective separation was performed on a Chiralpak® IB column using mobile phase composed of ultrapure water : tetrahydrofuran : diethylamine (65 : 35 : 0.05, v/v/v). After MSPE optimization, in which a magnetic molecularly imprinted polypyrrole (MMIPPy) was used as adsorbent, the best conditions were: 500 µL of acetonitrile as eluent, 75 mg of MMPPy, 1000 µL of milk sample (pH adjusted to 6.5.). The analyses showed recoveries/relative standard deviation (RSD%) 79.7 ± 2.5 and 81.1 ± 2.2 for (R)-(-)-PZQ and (S)-(+)-PZQ, respectively. By computational study carried out on the molecular design of the synthesized MMIPPy, it was found that the formation of four hydrogen bonds and one π-π stacking interaction explain the formation of the PZQ-pyrrole pre-polymerization complex at the molecular level. From the analytical validation, the developed method showed to be linear in the concentration range of 0.01 to 10 µg mL-1, with correlation coefficient larger than 0.98 and RSD% values below 15%. The LOQ obtained was 0.01 µg mL-1 for both enantiomers, with RSD% and relative error below 20%. The method was successfully applied in real sheep milk samples from various local suppliers. Finally, the results showed that MMIPPy in MSPE is an economical, simple and easy-to-perform technique.

Elucidation of the chromatographic enantiomer elution order for praziquantel: An experimental and theoretical assessment.

In this work, we have studied both experimentally and theoretically the praziquantel (PZQ) chiral discrimination. According to the main results, the enantioseparation of PZQ was efficiently optimized by HPLC on the reverse phase from the Chiralpak IB column, which has cellulose tris (3,5-dimethylphenylcarbamate) (CDMPC) as a chiral selector. The thermodynamic and structural parameters obtained via density functional theory (DFT) calculations pointed out the chiral discrimination as well as the enantiomeric elution order of PZQ, thus elucidating the experimental data and validating our proposed method. Finally, the hydrogen bonds and π-π stacking interactions played a key role in the discrimination between the PZQ diastereomeric complexes formed.

Development and validation of an experimental and theoretical method for the chiral discrimination of dinotefuran.

Dinotefuran is a low-cost agrochemical considered a highly toxic product. In this sense, there is a need for its constant environmental, biological, and food control, aiming to ensure its use to humans as well as to preserve biodiversity and ecosystems. In the present work, we developed an experimental and theoretical method for dinotefuran chiral discrimination. According to the main results, the dinotefuran enantioselective separation was efficiently optimized by high-performance liquid chromatography evaluating the influence of different percentage compositions in the mobile phase to improve the resolution of the peaks in the chromatogram. The novelty of this work was the proposition of a reduced molecular model for the chiral selector amylose-Tris-(3,5-dimethylphenylcarbamate) polysaccharide that was able to adequately describe at the molecular level its interaction with the dinotefuran enantiomers. Besides, the thermodynamic and structural parameters obtained via density functional theory calculations pointed out the chiral discrimination as well as the enantiomeric elution order of the analyte studied, confirming the experimental data, thus validating our proposed method. Finally, hydrogen bonds and repulsive interactions played a key role in the discrimination between the diastereomeric complexes, and consequently, for the dinotefuran enantioselective separation.

Rational design of a molecularly imprinted polymer for dinotefuran: theoretical and experimental studies aimed at the development of an efficient adsorbent for microextraction by packed sorbent.

In this work, we studied theoretically the formation process of a molecularly imprinted polymer (MIP) for dinotefuran (DNF), testing distinct functional monomers (FM) in various solvents through density functional theory calculations. The results revealed that the best conditions for MIP synthesis were established with methacrylic acid (MAA) as FM in a 1 : 4 stoichiometry and with chloroform as the solvent. This protocol showed the most favourable stabilization energies for the pre-polymerization complexes. Furthermore, the formation of the FM/template complex is enthalpy driven and the occurrence of hydrogen bonds between the DNF and MAA plays a major role in the complex stability. To confirm the theoretical results, MIP was experimentally synthesized considering the best conditions found at the molecular level and characterized by scanning electron microscopy and thermogravimetric analysis. After that, the synthesized material was efficiently employed in microextraction by packed sorbent combined with high-performance liquid chromatography in a preliminary study of the recovery of DNF from water and artificial saliva samples.

Efficient molecularly imprinted polymer as a pipette-tip solid-phase sorbent for determination of carvedilol enantiomers in human urine.

In this work, an efficient pipette tip based on molecularly imprinted polymers solid-phase extraction (PT-MIP-SPE) method was developed for carvedilol (CAR) analysis. This compound is available in clinical practice as a racemic mixture, in which (-)-(S)-CAR is a ß- and α1-adrenergic antagonist, while (+)-(R)-CAR only acts as an α1-adrenergic antagonist. Enantioseparation of CAR presented satisfactory retention times (5.85 and 14.84min), acceptable theoretical plates (N=2048 and 2018) and good resolution (Rs=9.27). The separation was performed using a Chiralpak® IA column (100mm×4.6mm, 3µm), a mixture of methanol:ethanol:water (64:15:21, v/v/v) plus 0.3% diethylamine as mobile phase, temperature of 35°C and flow rate of 1.5mLmin-1. After density functional theory calculations based on prepolymerization complexes, the best protocol for the MIP synthesis was chosen. Then, some parameters that affect the PT-MIP-SPE technique were investigated. After optimization, the best conditions were 300µL of water as washing solvent, 500µL of acetonitrile:acetic acid (7:3, v/v) as eluting solvent, 20mg of MIP, 500µL of urine sample (pH 12.5) and no addition of NaCl. Recoveries±relative standard deviation (RSD%) for (+)-(R)-CAR and (-)-(S)-CAR were 101.9±4.8% and 104.6±2.1%, respectively. The method was linear over the concentration range from 20 to 1280ngmL-1 for each enantiomer, with correlation coefficients larger than 0.99 for both enantiomers. The method was applied successfully in a preliminary study of urinary excretion after administration of CAR racemate to a healthy volunteer.