One-step ultrasound-assisted recovery of yellow-orange-red natural coloring from defatted annatto seeds: A cleaner processing alternative.

The interest in natural colorants derived from sustainable processes has prompted research into obtaining bixin from defatted annatto (Bixa orellana L.) seeds. Bixin is a compound that imparts yellow-orange-red coloration, known for its high biodegradability, low toxicity, and wide industrial applicability. Meanwhile, high-intensity ultrasound (HIUS) technology has emerged as a promising method for extracting natural colorants, offering higher yields through shorter processes and minimizing thermal degradation. Although some studies have demonstrated the efficiency of HIUS technology in bixin extraction, research on the effects of acoustic cavitation on the properties of the colorant remains limited. Therefore, this study aimed to investigate the influence of HIUS-specific energy levels (0.02, 0.04, 0.12, and 0.20 kJ/g) on the chemical, physical, and morphological characteristics of annatto extracts containing bixin and geranylgeraniol. Single-step extractions of bixin using ethanol as a solvent were evaluated at various acoustic powers (4.6, 8.5, 14.5, and 20 W) and extraction times (0.5, 1, 3, and 5 min) to determine their impact on the yield of natural colorant extraction. Increasing the acoustic power from 4.6 to 20 W and extending the extraction time from 0.5 to 5 min resulted in higher yields of natural colorant, likely due to the effects of acoustic cavitation and increased heat under more intense conditions. However, elevated levels of mechanical and thermal energy did not affect the chemical properties of the colorant, as indicated by UV-Vis and FTIR spectra. Conversely, higher specific energies yielded colorants with a more intense red hue, consistent with increased bixin content, and altered the microstructure and physical state, as observed in X-ray diffractograms. Nevertheless, these alterations did not impact the solubility of the colorant. Therefore, employing a cleaner extraction procedure aided by one-step ultrasound facilitated the recovery of natural colorants and contributed to the biorefining of annatto seeds, enabling the production of a rich geranylgeraniol colorant through a sustainable approach.

Pulsed electric field technology in vegetable and fruit juice processing: A review.

The worldwide market for vegetable and fruit juices stands as a thriving sector with projected revenues reaching to $81.4 billion by 2024 and an anticipated annual growth rate of 5.27% until 2028. Juices offer a convenient means of consuming bioactive compounds and essential nutrients crucial for human health. However, conventional thermal treatments employed in the juice and beverage industry to inactivate spoilage and pathogenic microorganisms, as well as endogenous enzymes, can lead to the degradation of bioactive compounds and vitamins. In response, non-thermal technologies have emerged as promising alternatives to traditional heat processing, with pulsed electric field (PEF) technology standing out as an innovative and sustainable choice. In this context, this comprehensive review investigated the impact of PEF on the microbiological, physicochemical, functional, nutritional, and sensory qualities of vegetable and fruit juices. PEF induces electroporation phenomena in cell membranes, resulting in reversible or irreversible changes. Consequently, a detailed examination of the effects of PEF process variables on juice properties is essential. Monitoring factors such as electric field strength, frequency, pulse width, total treatment time, and specific energy is important to ensure the production of a safe and chemically/kinetically stable product. PEF technology proves effective in microbial and enzymatic inactivation within vegetable and fruit juices, mitigating factors contributing to deterioration while maintaining the physicochemical characteristics of these products. Furthermore, PEF treatment does not compromise the content of substances with functional, nutritional, and sensory properties, such as phenolic compounds and vitamins. When compared to alternative processing methods, such as mild thermal treatments and other non-thermal technologies, PEF treatment consistently demonstrates comparable outcomes in terms of physicochemical attributes, functional properties, nutritional quality, and overall safety.

Pulsed electric field technology as a promising pre-treatment for enhancing orange agro-industrial waste biorefinery.

In the processing of orange juice, 50-70% of the fresh fruit weight is converted into organic waste. Orange processing waste (OPW) primarily consists of peels, seeds, and pulp. Improper disposal of this residue can lead to greenhouse gas emissions, environmental pollution, and the wastage of natural resources. To address this ecological issues, recent research has focused on developing innovative process designs to maximize the valorization of OPW through biorefinery strategies. However, the current challenge in implementing these methods for industrial waste management is their significant energy consumption. In response to these challenges, recent studies have explored the potential of employing pulsed electric field (PEF) technology as a pre-treatment to improve energy efficiency in biorefinery processes. This non-thermal and emerging technology can enhance the mass transfer of intracellular components via electroporation of cell walls, thereby resulting in shorter processing times, lower energy inputs, greater retention of thermosensitive components, and higher extraction yields. In this regard, this review offers a comprehensive discussion on the innovative biorefinery strategies to the valorization of OPW, with a specific focus on recent studies assessing the technical feasibility of methodologies for the extraction of phytochemical compounds, dehydration processes, and bioconversion methods. Recent studies that discussed the potential of PEF technology to reduce energy demand by increasing the mass transfer of biological tissues were emphasized.

Non-Thermal Supercritical Carbon Dioxide Processing Retains the Quality Parameters and Improves the Kinetic Stability of an Araticum Beverage Enriched with Inulin-Type Dietary Fibers.

Fruit-based beverages have been considered excellent food vehicles for delivering prebiotics. However, the conventional thermal processes currently used to microbiologically and enzymatically stabilize these products may cause significant losses in their sensory, physicochemical, nutritional, and bioactive characteristics. Thus, in this study, we evaluate the effect of different levels of pressure (8, 15, and 21 MPa) and temperature (35 and 55 °C) on the characteristics of an inulin-enriched araticum beverage processed with non-thermal supercritical carbon dioxide (SC-CO2) technology. The temperature showed a significant effect on total soluble solids, pH, particle size distribution, and kinetic stability. In contrast, pressure affected only the particle size distribution. The interaction between pressure and temperature influenced the total soluble solids, pH, and particle size distribution. Color parameters, ζ-potential, and glucose and fructose contents were not modified after all SC-CO2 treatments. Moreover, the SC-CO2 treatments preserved the inulin molecular structure, thus maintaining its prebiotic functionality. Overall, the SC-CO2 treatment did not alter the sensory, nutritional, and functional quality of the beverage, while improving its physical stability during storage. Therefore, non-thermal SC-CO2 treatment can be an alternative to current conventional processes for stabilizing inulin-enriched fruit-based beverages.

High-intensity ultrasound-based process strategies for obtaining edible sunflower (Helianthus annuus L.) flour with low-phenolic and high-protein content.

The sunflower Helianthus annuus L. represents the 4th largest oilseed cultivated area worldwide. Its balanced amino acid content and low content of antinutrient factors give sunflower protein a good nutritional value. However, it is underexploited as a supplement to human nutrition due to the high content of phenolic compounds that reduce the sensory quality of the product. Thus, this study aimed at obtaining a high protein and low phenolic compound sunflower flour for use in the food industry by designing separation processes with high intensity ultrasound technology. First, sunflower meal, a residue of cold-press oil extraction processing, was defatted using supercritical CO2 technology. Subsequently, sunflower meal was subjected to different conditions for ultrasound-assisted extraction of phenolic compounds. The effects of solvent composition (water: ethanol) and pH (4 to 12) were investigated using different acoustic energies and continuous and pulsed process approaches. The employed process strategies reduced the oil content of sunflower meal by up to 90% and reduced 83% of the phenolic content. Furthermore, the protein content of sunflower flour was increased up to approximately 72% with respect to sunflower meal. The acoustic cavitation-based processes using the optimized solvent composition were efficient in breaking down the cellular structure of the plant matrix and facilitated the separation of proteins and phenolic compounds, while preserving the functional groups of the product. Therefore, a new ingredient with high protein content and potential application for human food was obtained from the residue of sunflower oil processing using green technologies.

Supercritical Carbon Dioxide Technology for Recovering Valuable Phytochemicals from Cannabis sativa L. and Valorization of Its Biomass for Food Applications.

Supercritical carbon dioxide (CO2) extraction techniques meet all-new consumer market demands for health-promoting phytochemical compound-rich extracts produced from green and sustainable technology. In this regard, this review is dedicated to discussing is the promise of integrating high-pressure CO2 technologies into the Cannabis sativa L. processing chain to valorize its valuable pharmaceutical properties and food biomass. To do this, the cannabis plant, cannabinoids, and endocannabinoid system were reviewed to understand their therapeutic and side effects. The supercritical fluid extraction (SFE) technique was presented as a smart alternative to producing cannabis bioproducts. The impact of SFE operating conditions on cannabis compound extraction was examined for aerial parts (inflorescences, stems, and leaves), seeds, and byproducts. Furthermore, the opportunities of using non-thermal supercritical CO2 processing on cannabis biomass were addressed for industrial hemp valorization, focusing on its biorefinery to simultaneously produce cannabidiol and new ingredients for food applications as plant-based products.

Pulsed electric field assisted extraction of natural food pigments and colorings from plant matrices.

Coloring compounds are widely applied to manufacturing foods and beverages. The worldwide food market is replacing artificial colorants with natural alternatives, given the increased consumer demand for natural products. However, these substitutes are still an issue due to their high production cost and low chemical and physical stability. Furthermore, natural pigments are highly sensitive to processes applied in conventional extraction techniques, such as thermal, mechanical, and chemical stresses. In this regard, pulsed electric field (PEF) technology has emerged as a promising non-thermal alternative for recovering and producing natural colorings from food matrices. Its action mechanism on cell structures through the electroporation effect is a smart alternative to overcoming the challenging issues associated with producing natural colorants. In this scenario, this review provides an overview of the PEF assisted extraction of natural pigments and colorants, such as anthocyanins (red-blue-purple), betalains (red), carotenoids (yellow-orange-red), and chlorophylls (green) from plant sources. Moreover, the potential and limitations of this emerging technology to integrate the extraction process of natural colorants were discussed.

Study of the reaction between genipin and amino acids, dairy proteins, and milk to form a blue colorant ingredient.

Currently, one of the biggest challenges of the colorant industry is to obtain natural blue colorants. Among the different options, a blue pigment can be formed by a crosslinking reaction between genipin and primary amine groups. However, at the industrial level, obtaining an ingredient from pure compounds, such as amino acids, is economically unfeasible. The present work aimed to study the reaction and kinetics of the blue color formation, starting the study with pure compounds (genipin and amino acids) to more complex and cheaper natural sources, such as Genipa americana L. fruits and milk. The reaction kinetics of the monomers/dimers for different amino acids reacting with genipin was evaluated, as well as the preferential amino acid, genipin:amino acid ratio and pH, to obtain the most rapid and intense blue color. Finally, the blue pigment formed using milk and its proteins was characterized by SDS-PAGE. The results suggest that the reaction kinetic is influenced by the type and concentration of the amino acid used and the pH of the medium, which could facilitate the further standardization of the industrial process. We also suggested milk as an excellent reaction medium to obtain the colorant from genipin as it presents an ideal pH and favorable amino acid composition to facilitate the reaction.

Whey Beverage Emulsified System as Carrying Matrix of Fennel Seed Extract Obtained by Supercritical CO2 Extraction: Impact of Thermosonication Processing and Addition of Prebiotic Fibers.

Whey beverages that were enriched with fructooligosaccharides (FOS) and xylooligosaccharides (XOS) were used for carrying Foeniculum vulgare extract that was obtained by the supercritical CO2 extraction technique to produce novel functional products. Fennel-based whey beverages were subjected to thermosonication processing (100, 200, and 300 W at 60 °C for 15 min) to verify the performance of the dairy colloidal system for protecting the bioactive fennel compounds. The impacts of thermosonication processing on the quality attributes of the functional whey beverages were examined according to their droplet size distribution, microstructure, kinetic stability, color parameters, browning index, total phenolic content (TPC), and antioxidant capacity by DPPH (2,2-diphenyl-1-picrylhydrazyl) and ABTS (2,2-Azino-bis-(3-ethylbenzothiazoline)-6-sulphonic acid) assays. The enrichment of the whey beverages with FOS and XOS did not affect their kinetic stability. However, the addition of prebiotic dietary fibers contributed to reducing the mean droplet size due to the formation of whey protein-FOS/XOS conjugates. The thermosonication treatments did not promote color changes that were discernible to the human eye. On the other hand, the thermosonication processing reduced the kinetic stability of the beverages. Overall, the colloidal dairy systems preserved the antioxidant capacity of the fennel seed extract, regardless of thermosonication treatment intensity. The whey beverages enriched with FOS and XOS proved to be effective carrying matrices for protecting the lipophilic bioactive fennel compounds.

Low-frequency ultrasound-assisted esterification of Bixa orellana L. seed starch with octenyl succinic anhydride.

This study aimed to evaluate the impact of the ultrasound intensity (0, 5, 10, and 20 W/cm2) on the esterification of annatto (Bixa orellana L.) seed starch with octenyl succinic anhydride (OSA) employing a short processing time (5 min) to produce a novel emulsifier. OSA-esterified annatto seed starches were examined according to their degree of substitution (DS), amylose content, granule size distribution, microstructure, and X-ray diffractogram. Also, the performance of the OSA-modified annatto seed starch to stabilize colloidal systems was compared to commercial samples of OSA-modified starches. For this, annatto seed oil-in-water emulsions were produced and characterized according to their droplet size distribution, microstructure, and kinetic stability. Increasing ultrasound intensity from 5 W/cm2 to 20 W/cm2, DS values reached up to 0.139 ± 0.031. Likewise, these treatments yielded approximately 1.24-1.36 times more amylose content than the sample without ultrasound application. Most of the starch granules presented smooth surfaces without visible fissures. The higher ultrasound intensity hindered the aggregation of starch granules, thus forming well-defined elliptical particles. On the other hand, the increase of the ultrasound intensity did not change Brouckere mean diameter of the starch granules. No significant qualitative differences were seen in the X-ray diffractograms in terms of diffraction angle and peak intensity, indicating that the main functional characteristics of starches were not altered with ultrasound treatment. Furthermore, modified annatto starch was able to stabilize annatto seed oil-in-water emulsions. When compared to two commercial modified starches, OSA-esterified annatto starch produced a colloidal system with a larger Sauter mean diameter (14 ± 2 µm). However, the emulsion stabilized with modified annatto starch was more kinetically stable during the storage time in comparison to those stabilized with commercial starches.

Low-Frequency Ultrasound Coupled with High-Pressure Technologies: Impact of Hybridized Techniques on the Recovery of Phytochemical Compounds.

The coupling of innovative technologies has emerged as a smart alternative for the process intensification of bioactive compound extraction from plant matrices. In this regard, the development of hybridized techniques based on the low-frequency and high-power ultrasound and high-pressure technologies, such as supercritical fluid extraction, pressurized liquids extraction, and gas-expanded liquids extraction, can enhance the recovery yields of phytochemicals due to their different action mechanisms. Therefore, this paper reviewed and discussed the current scenario in this field where ultrasound-related technologies are coupled with high-pressure techniques. The main findings, gaps, challenges, advances in knowledge, innovations, and future perspectives were highlighted.

Fructans with different degrees of polymerization and their performance as carrier matrices of spray dried blue colorant.

Inulin-type fructans with different degrees of polymerization (DPs) were used as wall materials for the blue colorant produced from the crosslinking between genipin and milk proteins. The impact of using fructooligosaccharides (FOS) with DP = 5 and inulins with DP ≥ 10 (GR-In) and DP ≥ 23 (HP-In) on the physical (microstructure, size, water activity, wettability, solubility, water adsorption, glass transition temperature, and color), chemical (free genipin retention and moisture), and technological (colorant power, pH stability, and thermal stability) properties of the powdered blue colorant was examined. Inulins were more efficient carriers as seen from the physical characteristics of the microparticles. FOS and GR-In promoted higher retention of free genipin than HP-In. Additionally, their lower DP influenced the rehydration proprieties as well as the color intensity and colorant power. The DP did not affect the physical stability of the colorant at different pH conditions or at high temperature. Our findings demonstrated that the DP of the fructan exhibited a strong impact on the blue intensity of the samples and also their rehydration capacity.

Anthocyanins Recovered from Agri-Food By-Products Using Innovative Processes: Trends, Challenges, and Perspectives for Their Application in Food Systems.

Anthocyanins are naturally occurring phytochemicals that have attracted growing interest from consumers and the food industry due to their multiple biological properties and technological applications. Nevertheless, conventional extraction techniques based on thermal technologies can compromise both the recovery and stability of anthocyanins, reducing their global yield and/or limiting their application in food systems. The current review provides an overview of the main innovative processes (e.g., pulsed electric field, microwave, and ultrasound) used to recover anthocyanins from agri-food waste/by-products and the mechanisms involved in anthocyanin extraction and their impacts on the stability of these compounds. Moreover, trends and perspectives of anthocyanins' applications in food systems, such as antioxidants, natural colorants, preservatives, and active and smart packaging components, are addressed. Challenges behind anthocyanin implementation in food systems are displayed and potential solutions to overcome these drawbacks are proposed.

Supercritical CO2 Processing of a Functional Beverage Containing Apple Juice and Aqueous Extract of Pfaffia glomerata Roots: Fructooligosaccharides Chemical Stability after Non-Thermal and Thermal Treatments.

The effects of supercritical CO2 processing on the chemical stability of fructooligosaccharides (FOS) and other functional and nutritional compounds were evaluated employing non-thermal and thermal approaches. Apple juice was enriched with Pfaffia glomerata roots aqueous extract due to its high content of short-chain FOS and then subjected to different levels of temperature (40 and 60 °C), pressure (8 and 21 MPa), and CO2 volume ratio (20 and 50%). The percentage of CO2 volume was evaluated concerning the total volume of the high-pressure reactor. Also, the functional beverage was thermally treated at 105 °C for 10 min. Physicochemical properties (pH and soluble solid content), beta-ecdysone, sugars (glucose, fructose, and sucrose), and FOS (1-kestose, nystose, and fructofuranosylnystose) content were determined. The pH and soluble solid content did not modify after all treatments. The pressure and CO2 volume ratio did not influence the FOS content and their chemical profile, however, the temperature increase from 40 to 60 °C increased the nystose and fructofuranosylnystose content. High-temperature thermal processing favored the hydrolysis of 1-kestose and reduced the sucrose content. Regarding beta-ecdysone, its content remained constant after all stabilization treatments demonstrating thus its high chemical stability. Our results demonstrated that supercritical CO2 technology is a promising technique for the stabilization of FOS-rich beverages since the molecular structures of these fructans were preserved, thus maintaining their prebiotic functionality.

Ultrasound stabilization of raw milk: Microbial and enzymatic inactivation, physicochemical properties and kinetic stability.

The aim of this study was to evaluate the effects of non-thermal and thermal high-intensity ultrasound (HIUS) treatment on the microbial and enzymatic inactivation, physicochemical properties, and kinetic stability of the raw milk by applying different energy densities (1, 3, 5, and 7 kJ/mL). Two HIUS treatments were evaluated based on different nominal powers, named HIUS-A and HIUS-B, using 100 W and 475 W, respectively. HIUS-A treatment was non-thermal processing while HIUS-B was a thermal treatment only for the energy densities of 5 and 7 kJ/mL since the final temperature was above 70 °C. The HIUS-B treatment showed to be more efficient. Log reductions up to 3.9 cycles of aerobic mesophilic heterotrophic bacteria (AMHB) were achieved. Significant reductions of the fat globule size, with diameters lower than 1 µm, better color parameters, and kinetic stability during the storage were observed. Also, HIUS-B treatment inactivated the alkaline phosphatase and lactoperoxidase. The HIUS-B treatment at 3 kJ/mL worked below 57 °C being considered a border temperature since it did not cause unwanted physicochemical effects. Furthermore, a microbial inactivation of 1.8 ± 0.1 log cycles of AMHB was observed. A proper inactivation of only the Alkaline phosphatase and a significant reduction of the fat globules sizes, which kept the milk kinetically stable during storage was achieved.

Low-frequency and high-power ultrasound-assisted production of natural blue colorant from the milk and unripe Genipa americana L.

This study presents the production of a novel natural blue colorant obtained from the cross-linking between milk proteins and genipin assisted by low-frequency and high-power ultrasound technology. Genipin was extracted from unripe Genipa americana L. using milk as a solvent. Also, milk colloidal system was used as a reaction medium and carrier for the blue color compounds. The effects of ultrasound nominal power (100, 200, 300, and 400 W) on the blue color formation kinetics in milk samples were evaluated at 2, 24, and 48 h of cold storage in relation to their free-genipin content and color parameters. In addition, Fourier transform infrared (FTIR) spectrum, droplet size distribution, microstructure, and kinetic stability of the blue colorant-loaded milk samples were assessed. Our results have demonstrated that the ultrasound technology was a promising and efficient technique to obtain blue colorant-loaded milk samples. One-step acoustic cavitation assisted the genipin extraction and its diffusion into the milk colloidal system favoring its cross-linking with milk proteins. Ultrasound process intensification by increasing the nominal power promoted higher genipin recovery resulting in bluer milk samples. However, the application of high temperatures associated with intensified acoustic cavitation processing favored the occurrence of non-enzymatic browning due to the formation of complex melanin substances from the Maillard reaction. Also, the blue milk samples were chemically stable since their functional groups were not modified after ultrasound processing. Likewise, all blue colorant-loaded milk samples were kinetically stable during their cold storage. Therefore, a novel natural blue colorant with high-potential application in food products like ice creams, dairy beverages, bakery products, and candies was produced.

Clove essential oil emulsion-filled cellulose nanofiber hydrogel produced by high-intensity ultrasound technology for tissue engineering applications.

High-intensity ultrasound (HIUS) was used to produce emulsion-filled cellulose nanofiber (CNF) hydrogel using clove essential oil (0.1, 0.5 and 1.0 wt%) as dispersed phase towards tissue engineering applications. The novel encapsulating systems obtained using HIUS specific energy at the levels of 0.10, 0.17, and 0.24 kJ/g were characterized by oil entrapment efficiency, microstructure, water retention value, color parameters, and viscoelastic properties. Freeze-dried emulsion-filled CNF hydrogels were characterized by porosity and swelling capacity. In addition, human gingival fibroblast cell cytocompatibility tests were performed to evaluate their potential applications as tissue engineering scaffold. The clove essential oil content strongly affected the oil entrapment efficiency, water retention value, color difference and whiteness of the prepared emulsion-filled CNF hydrogel. And, the HIUS energy only affected the yellowness of the emulsion-filled CNF hydrogel. Via HIUS processing, the CNF hydrogel successfully acted as a continuous phase in the emulsion-filled gel system with maximum oil entrapment efficiency of 34% when 0.5 wt% clove essential oil was added to the system. The encapsulating systems had predominantly gel-like property with maximum elastic modulus of 411 Pa. Furthermore, the emulsion-filled CNF hydrogels with the addition of clove essential oil up to 0.5 wt% indicated good cell viability rates (74-101%) to human gingival fibroblast cells. The newly developed clove essential oil emulsion-filled CNF hydrogel shows desirable cytocompatibility characteristics and can be considered as an alternative scaffold for tissue engineering applications.

High-intensity ultrasound-assisted formation of cellulose nanofiber scaffold with low and high lignin content and their cytocompatibility with gingival fibroblast cells.

Cellulose nanofiber (CNF) hydrogels with low lignin (8%) (LL-CNF) and high lignin (18%) (HL-CNF) content were produced at nominal powers of 240, 720 and 1200 W using high-intensity ultrasound technology (HIUS). Freeze-dried CNF hydrogels were evaluated as scaffolds for gingival fibroblast cells proliferation aiming biomedical applications. HIUS processing improved the dispersibility of the CNF and increased the water retention value by more than 5 times. The LL-CNF had a maximum fibrillation yield of 46 wt.%, whereas the HL-CNF had a maximum fibrillation yield of 40 wt.% at nominal power of ≥720 W. Regardless of the lignin content, the CNF hydrogels exhibited a typical elastic gel-like behavior with the highest elasticity of 263 Pa. After freeze-drying, the CNF aerogels had porosity ≥ 96.8%, and swelling capacity up to 42.1 g PBS/g aerogel. Moreover, the cell proliferation assay showed no differences in proliferation among the LL-CNF and HL-CNF scaffolds up to 11 days. Therefore, CNF scaffolds prepared with lignin content up to 18% present promising application in the biomedical field.

High-intensity ultrasound energy density: How different modes of application influence the quality parameters of a dairy beverage.

This study evaluated the influence of the high-intensity ultrasound (HIUS) technology on the quality parameters of a model dairy beverage (chocolate whey beverage), operating under the same energy density (5000 J/mL), but applied at different ways. Two processes were performed varying nominal power and processing time: HIUS-A (160 W and 937 s), and HIUS-B (720 W and 208 s). Our objective was to understand how different modes of application of the same HIUS energy density could influence the microstructure, droplet size distribution, zeta potential, phase separation kinetic, color parameters and mineral profile of the chocolate whey beverage. The results demonstrated that the different modes of application of the same HIUS energy density directly influenced the final quality of the product, resulting in whey beverages with distinct physical and microstructural characteristics. The HIUS-B processing was characterized as a thermal processing, since the final processing temperature reached 71 °C, while the HIUS-A processing was a non-thermal process, reaching a final temperature of 34 °C. Moreover, HIUS-B process greatly reduced the droplet size and increased the lightness value in relation to the HIUS-A processing. Both treatments resulted in whey beverages with similar phase separation kinetics and were more stable than the untreated sample. The HIUS processes did not modify the mineral content profile. Overall, the study emphasizes the versatility of the HIUS technology, highlighting that the processing must not be based only on the applied energy density, since different powers and processing times produce dairy beverages with distinct characteristics.

Xylooligosaccharides chemical stability after high-intensity ultrasound processing of prebiotic orange juice.

The effects of the high-intensity ultrasound (HIUS) technology at the nominal powers of 300, 600, 900, and 1200 W were evaluated on the chemical stability of xylooligosaccharides (XOS) used to enrich orange juice. The ultrasound energy performance for each nominal power applied to the XOS-enriched orange juice was determined by calculating acoustic powers (W), HIUS intensity (W/cm2), and energy density (kJ/mL). Physicochemical properties (pH and soluble solid content), organic acid content (ascorbic, malic, and citric acids), total phenolic content (TPC), antioxidant activity by the FRAP (Ferric reducing ability of plasma) method, sugar (glucose, fructose, and sucrose), and XOS (xylobiose, xylotriose, xylotetraose, xylopentaose, and xylohexaose) content were determined. The pH and soluble solid content did not change after all HIUS treatments. The HIUS process severity was monitored by quantifying ascorbic acid content after the treatments. A significant linear decrease in the ascorbic acid content was observed in prebiotic orange juice with the HIUS process intensification by increasing nominal power. The malic acid and citric acid contents had similar behavior according to the HIUS process intensification. The nominal power increase from 300 to 600 W increased the concentration of both organic acids, however, the intensification up to 1200 W reduced their concentration in the functional beverage. The TPC and FRAP data corroborated with the results observed for the ascorbic acid content. However, the HIUS processing did not alter sugar and XOS contents. The XOS chromatographic profiles were not modified by the HIUS treatment and presented the same amount of all prebiotic compounds before and after the HIUS treatment. Overall, HIUS technology has been evaluated as a promising stabilization technique for prebiotic beverages enriched with XOS due to their high chemical stability to this emerging technology under severe process conditions.