RESUMO
Bacterial coaggregation is a highly specific type of cell-cell interaction, well-documented among oral bacteria, and involves specific characteristics of the cell surface of the coaggregating strains. However, the understanding of the mechanisms promoting coaggregation in aquatic systems remains limited. This gap is critical to address, given the broad implications of coaggregation for multispecies biofilm formation, water quality, the performance of engineered systems, and diverse biotechnological applications. Therefore, this study aims to comprehensively characterize the cell surface of the coaggregating strain Delftia acidovorans 005P, isolated from drinking water, alongside a non-coaggregating strain, D. acidovorans 009P. By analyzing two strains of the same species, we aim to identify the factors contributing to the coaggregation ability of strain 005P. To achieve this, we employed a combination of physicochemical characterization, Fourier-transform infrared spectroscopy (FTIR), and advancing imaging techniques [transmission electron microscopy and cryo-electron tomography (cryo-ET)]. The coaggregating strain (005P) exhibited higher surface hydrophobicity, negative surface charge, and cell surface and co-adhesion energies than the non-coaggregating strain (009P). The chemical characterization of bacterial surfaces through FTIR revealed subtle differences, particularly in spectral regions linked to carbohydrates and phosphodiesters/amide III of proteins (860-930 cm-1 and 1212-1240 cm-1, respectively). Cryo-ET highlighted significant differences in pili structures between the strains, such as variations in length, frequency, and arrangement. The pili in the 005P strain, identified as pili-like adhesins, serve as key mediators of coaggregation. By integrating physicochemical analyses and high-resolution imaging techniques, this study conclusively links the coaggregation ability of D. acidovorans 005P to its unique pili characteristics, emphasizing their crucial role in microbial coaggregation in aquatic environments.
Assuntos
Aderência Bacteriana , Biofilmes , Espectroscopia de Infravermelho com Transformada de Fourier , Propriedades de SuperfícieRESUMO
Antibiotics are a staple in current medicine for the therapy of infectious diseases. However, their extensive use and misuse, combined with the high adaptability of bacteria, has dangerously increased the incidence of multi-drug-resistant (MDR) bacteria. This makes the treatment of infections challenging, especially when MDR bacteria form biofilms. The most recent antibiotics entering the market have very similar modes of action to the existing ones, so bacteria rapidly catch up to those as well. As such, it is very important to adopt effective measures to avoid the development of antibiotic resistance by pathogenic bacteria, but also to perform bioprospecting of new molecules from diverse sources to expand the arsenal of drugs that are available to fight these infectious bacteria. Filamentous fungi have a large and vastly unexplored secondary metabolome and are rich in bioactive molecules that can be potential novel antimicrobial drugs. Their production can be challenging, as the associated biosynthetic pathways may not be active under standard culture conditions. New techniques involving metabolic and genetic engineering can help boost antibiotic production. This study aims to review the bioprospection of fungi to produce new drugs to face the growing problem of MDR bacteria and biofilm-associated infections.
RESUMO
Phototrophic and heterotrophic microorganisms coexist in complex and dynamic structures called periphyton. These structures shape the biogeochemistry and biodiversity of aquatic ecosystems. In particular, microalgae-bacteria interactions are a prominent focus of study by microbial ecologists and can provide biotechnological opportunities for numerous applications (i.e. microalgal bloom control, aquaculture, biorefinery, and wastewater bioremediation). In this review, we analyze the species dynamics (i.e. periphyton formation and factors determining the prevalence of one species over another), coexisting communities, exchange of resources, and communication mechanisms of periphytic microalgae and bacteria. We extend periphyton mathematical modelling as a tool to comprehend complex interactions. This review is expected to boost the applicability of microalgae-bacteria consortia, by drawing out knowledge from natural periphyton.
Assuntos
Microalgas , Perifíton , Ecossistema , Bactérias , BiodiversidadeRESUMO
The presence of contaminants of emerging concern (CECs) in the environment has been recognized as a worldwide concern. In particular, water pollution by CECs is becoming a major global problem, which requires ongoing evaluation of water resources policies at all levels and the use of effective and innovative wastewaters treatment processes for their removal. Microalgae have been increasingly recognized as relevant for wastewater polishing, including CECs removal. These microorganisms are commonly cultivated in suspension. However, the use of planktonic microalgae for wastewater treatment has limitations in terms of microbiological contamination, process effectiveness and sustainability. The use of consortia of microalgae and bacteria represents a significant advance for sustainable wastewater polishing, particularly when the microorganisms are associated as biofilms. These immobilized mixed cultures can overcome the limitations of suspended-microalgae systems and improve the performance of the involved species for CECs removal. In addition, microalgae-bacteria based systems can offer a relevant combined effect for CECs removal and biomass production enhancement. This study reviews the advantages and advances on the use of microalgae for wastewater treatment, highlighting the potential on the use of microalgae-bacteria biofilms for CECs removal and the further biomass valorisation for third-generation biofuel production.
Assuntos
Microalgas , Purificação da Água , Biocombustíveis , Biomassa , Águas ResiduáriasRESUMO
Biofilm control is mainly based on chemical disinfection, without a clear understanding of the role of the biocides and process conditions on biofilm removal. This study aims to understand the effects of a biocide (benzyldimethyldodecyl ammonium chloride-BDMDAC) and mechanical treatment (an increase of shear stress -τw) on single- and dual-species biofilms formed by Bacillus cereus and Pseudomonas fluorescens on high-density polyethene (HDPE). BDMDAC effects were initially assessed on bacterial physicochemical properties and initial adhesion ability. Then, mature biofilms were formed on a rotating cylinder reactor (RCR) for 7 days to assess the effects of chemical and mechanical treatments, and the combination of both on biofilm removal. The results demonstrated that the initial adhesion does not predict the formation of mature biofilms. It was observed that the dual-species biofilms were the most susceptible to BDMDAC exposure. The exposure to increasing τw emphasised the mechanical stability of biofilms, as lower values of τw (1.66 Pa) caused high biofilm erosion and higher τw values (17.7 Pa) seem to compress the remaining biofilm. In general, the combination of BDMDAC and the mechanical treatment was synergic in increasing biofilm removal. However, these were insufficient to cause total biofilm removal (100%; an average standard deviation of 11% for the method accuracy should be considered) from HDPE.
RESUMO
The establishment of a sessile community is believed to occur in a sequence of steps where genetically distinct bacteria can become attached to partner cells via specific molecules, in a process known as coaggregation. The presence of bacteria with the ability to autoaggregate and coaggregate has been described for diverse aquatic systems, particularly freshwater, drinking water, wastewater, and marine water. In these aquatic systems, coaggregation already demonstrated a role in the development of complex multispecies sessile communities, including biofilms. While specific molecular aspects on coaggregation in aquatic systems remain to be understood, clear evidence exist on the impact of this mechanism in multispecies biofilm resilience and homeostasis. The identification of bridging bacteria among coaggregating consortia has potential to improve the performance of wastewater treatment plants and/or to contribute for the development of strategies to control undesirable biofilms. This study provides a comprehensive analysis on the occurrence and role of bacterial coaggregation in diverse aquatic systems. The potential of this mechanism in water-related biotechnology is further described, with particular emphasis on the role of bridging bacteria.
Assuntos
Bactérias , Aderência Bacteriana , Bactérias/genética , Biofilmes , Água DoceRESUMO
LegionellaDB is the first database on Legionella outbreaks; it is based on a metadata analysis of peer-reviewed manuscripts from PubMed and SCOPUS. LegionellaDB is dynamic and extensible, allowing users to search for specific outbreaks, suggest additional information to be included after curation, visualize statistical representations on specific outbreaks, and download selected data. The database is maintained online.
Assuntos
Bases de Dados Factuais , Legionella/fisiologia , Legionelose/microbiologia , Surtos de Doenças , Humanos , Legionella/classificação , Legionella/genética , Legionella/isolamento & purificação , Legionelose/epidemiologiaRESUMO
Biofilms are structures comprising microorganisms associated to surfaces and enclosed by an extracellular polymeric matrix produced by the colonizer cells. These structures protect microorganisms from adverse environmental conditions. Biofilms are typically associated with several negative impacts for health and industries and no effective strategy for their complete control/eradication has been identified so far. The antimicrobial properties of copper are well recognized among the scientific community, which increased their interest for the use of these materials in different applications. In this review the use of different copper materials (copper, copper alloys, nanoparticles and copper-based coatings) in medical settings, industrial equipment and plumbing systems will be discussed considering their potential to prevent and control biofilm formation. Particular attention is given to the mode of action of copper materials. The putative impact of copper materials in the health and/or products quality is reviewed taking into account their main use and the possible effects on the spread of antimicrobial resistance.
RESUMO
Concerns on the presence of emerging contaminants (ECs) in water sources have increased in recent years. The lack of efficient technologies to remove ECs from residual waters contributes for their appearance in drinking water distribution systems (DWDS). Therefore, sessile microorganisms on DWDS pipes are continuously exposed to trace concentrations of ECs. However, no data exists on the role of ECs on the resident microbiota. The present work aims to understand the effects of prolonged exposure of a bacterial strain of Stenotrophomonas maltophilia, isolated from a DWDS, in both planktonic and biofilm states, to trace concentrations of selected ECs (antipyrine-ANTP; diclofenac sodium salt-DCF; ibuprofen-IBP; galaxolide-GAL; tonalide-TON; carbamazepine-CBZ; clofibric acid-CA; tylosin-TY) on its tolerance to sodium hypochlorite (NaOCl) and resistance to antibiotics. Pre-established S. maltophilia biofilms were exposed to ECs for 26 d. Subsequently, the planktonic behaviour of the biofilm cells grown in the presence of ECS was characterized in terms of susceptibility to NaOCl and to selected antibiotics (levofloxacin and trimethoprim-sulfamethoxazole). Moreover, S.maltophilia was tested on its biofilm productivity in the presence of ECs (alone and mixed). These biofilms were challenged by NaOCl in order to assess the role of ECs on biofilm susceptibility. The results did not evidence remarkable effects of ECs on planktonic S. maltophilia susceptibility to NaOCl and antibiotics. However, S. maltophilia biofilm production and susceptibility to NaOCl was affected from ECs pre-exposure, particularly by the combination of different ECs (CAâ¯+â¯CBZ, CAâ¯+â¯IBP, CAâ¯+â¯CBZâ¯+â¯IBP). S. maltophilia biofilms became more resistant to removal by NaOCl when developed in the presence of mixtures of CAâ¯+â¯CBZ and CAâ¯+â¯CBZâ¯+â¯IBP. Also, biofilm production was significantly affected. CA was present in all the combinations that altered biofilm behaviour. The overall results propose that exposure to ECs for 26â¯days had not a huge impact on S. maltophilia planktonic antimicrobial susceptibility. Nevertheless, the prolonged exposure to some ECs altered biofilm production and tolerance to NaOCl, with a potential practical outcome of hindering DWDS disinfection. The simultaneous presence of different ECs in the environment may amplify biofilm resilience.
Assuntos
Água Potável/microbiologia , Stenotrophomonas maltophilia/efeitos dos fármacos , Poluentes Químicos da Água/toxicidade , Antibacterianos , Biofilmes , Água Potável/química , PlânctonRESUMO
Biofilms can cause severe problems to human health due to the high tolerance to antimicrobials; consequently, biofilm science and technology constitutes an important research field. Growing a relevant biofilm in the laboratory provides insights into the basic understanding of the biofilm life cycle including responses to antibiotic therapies. Therefore, the selection of an appropriate biofilm reactor is a critical decision, necessary to obtain reproducible and reliable in vitro results. A reactor should be chosen based upon the study goals and a balance between the pros and cons associated with its use and operational conditions that are as similar as possible to the clinical setting. However, standardization in biofilm studies is rare. This review will focus on the four reactors (Calgary biofilm device, Center for Disease Control biofilm reactor, drip flow biofilm reactor, and rotating disk reactor) approved by a standard setting organization (ASTM International) for biofilm experiments and how researchers have modified these standardized reactors and associated protocols to improve the study and understanding of medical biofilms.
Assuntos
Biofilmes , Pesquisa Biomédica , Reatores Biológicos , Modelos Biológicos , Animais , Pesquisa Biomédica/instrumentação , Pesquisa Biomédica/normas , Humanos , Técnicas Analíticas Microfluídicas , Reprodutibilidade dos TestesRESUMO
Combinations of selected phytochemicals (reserpine, pyrrolidine, quinine, morin and quercetin) with antibiotics (ciprofloxacin, tetracycline and erythromycin) were tested on the prevention and control of Staphylococcus aureus biofilms. The phytochemicals were also studied for their ability to avoid antibiotic adaptation and to inhibit antibiotic efflux pumps. Morin, pyrrolidine and quercetin at subinhibitory concentrations had significant effects in biofilm prevention and/or control when applied alone and combined with antibiotics. Synergism between antibiotics and phytochemicals was found especially against biofilms of NorA overexpressing strain S. aureus SA1199B. This strain when growing with subinhibitory concentrations of ciprofloxacin developed increased tolerance to this antibiotic. However, this was successfully reversed by quinine and morin. In addition, reserpine and quercetin showed significant efflux pump inhibition. The overall results demonstrate the role of phytochemicals in co-therapies to promote more efficient treatments and decrease antimicrobial resistance to antibiotics, with substantial effects against S. aureus in both planktonic and biofilm states.
Assuntos
Antibacterianos/farmacologia , Biofilmes/efeitos dos fármacos , Compostos Fitoquímicos/farmacologia , Staphylococcus aureus/efeitos dos fármacos , Antibacterianos/administração & dosagem , Ciprofloxacina/administração & dosagem , Ciprofloxacina/farmacologia , Sinergismo Farmacológico , Eritromicina/administração & dosagem , Eritromicina/farmacologia , Flavonoides/administração & dosagem , Flavonoides/farmacologia , Testes de Sensibilidade Microbiana , Compostos Fitoquímicos/administração & dosagem , Quercetina/efeitos adversos , Quercetina/farmacologia , Quinina/administração & dosagem , Quinina/farmacologia , Staphylococcus aureus/fisiologia , Tetraciclina/administração & dosagem , Tetraciclina/farmacologiaRESUMO
Plants contain numerous components that are important sources of new bioactive molecules with antimicrobial properties. Isothiocyanates (ITCs) are plant secondary metabolites found in cruciferous vegetables that are arising as promising antimicrobial agents in food industry. The aim of this study was to assess the antibacterial activity of two isothiocyanates (ITCs), allylisothiocyanate (AITC) and 2-phenylethylisothiocyanate (PEITC) against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Listeria monocytogenes. The antibacterial mode of action was also characterized by the assessment of different physiological indices: membrane integrity, intracellular potassium release, physicochemical surface properties and surface charge. The minimum inhibitory concentration (MIC) of AITC and PEITC was 100 µg/mL for all bacteria. The minimum bactericidal concentration (MBC) of the ITCs was at least 10 times higher than the MIC. Both AITC and PEITC changed the membrane properties of the bacteria decreasing their surface charge and compromising the integrity of the cytoplasmatic membrane with consequent potassium leakage and propidium iodide uptake. The surface hydrophobicity was also non-specifically altered (E. coli and L. monocytogenes become less hydrophilic; P. aeruginosa and S. aureus become more hydrophilic). This study shows that AITC and PEITC have strong antimicrobial potential against the bacteria tested, through the disruption of the bacterial cell membranes. Moreover, phytochemicals are highlighted as a valuable sustainable source of new bioactive products.
RESUMO
BACKGROUND: Plating methods are still the golden standard in microbiology; however, some studies have shown that these techniques can underestimate the microbial concentrations and diversity. A nutrient shock is one of the mechanisms proposed to explain this phenomenon. In this study, a tentative method to assess nutrient shock effects was tested. FINDINGS: To estimate the extent of nutrient shock effects, two strains isolated from tap water (Sphingomonas capsulata and Methylobacterium sp.) and two culture collection strains (E. coli CECT 434 and Pseudomonas fluorescens ATCC 13525) were exposed both to low and high nutrient conditions for different times and then placed in low nutrient medium (R2A) and rich nutrient medium (TSA).The average improvement (A.I.) of recovery between R2A and TSA for the different times was calculated to more simply assess the difference obtained in culturability between each medium. As expected, A.I. was higher when cells were plated after the exposition to water than when they were recovered from high-nutrient medium showing the existence of a nutrient shock for the diverse bacteria used. S. capsulata was the species most affected by this phenomenon. CONCLUSIONS: This work provides a method to consistently determine the extent of nutrient shock effects on different microorganisms and hence quantify the ability of each species to deal with sudden increases in substrate concentration.
Assuntos
Bactérias/crescimento & desenvolvimento , Técnicas Bacteriológicas/métodos , Meios de Cultura/química , Estresse Fisiológico , Contagem de Colônia Microbiana , Escherichia coli/crescimento & desenvolvimento , Methylobacterium/crescimento & desenvolvimento , Viabilidade Microbiana , Pressão Osmótica , Pseudomonas fluorescens/crescimento & desenvolvimento , Sphingomonas/crescimento & desenvolvimentoRESUMO
This study investigated the physiology and behaviour following treatment with ortho-phthalaldehyde (OPA), of Pseudomonas fluorescens in both the planktonic and sessile states. Steady-state biofilms and planktonic cells were collected from a bioreactor and their extracellular polymeric substances (EPS) were extracted using a method that did not destroy the cells. Cell structure and physiology after EPS extraction were compared in terms of respiratory activity, morphology, cell protein and polysaccharide content, and expression of the outer membrane proteins (OMP). Significant differences were found between the physiological parameters analysed. Planktonic cells were more metabolically active, and contained greater amounts of proteins and polysaccharides than biofilm cells. Moreover, biofilm formation promoted the expression of distinct OMP. Additional experiments were performed with cells after EPS extraction in order to compare the susceptibility of planktonic and biofilm cells to OPA. Cells were completely inactivated after exposure to the biocide (minimum bactericidal concentration, MBC = 0.55 ± 0.20 mM for planktonic cells; MBC = 1.7 ± 0.30 mM for biofilm cells). After treatment, the potential of inactivated cells to recover from antimicrobial exposure was evaluated over time. Planktonic cells remained inactive over 48 h while cells from biofilms recovered 24 h after exposure to OPA, and the number of viable and culturable cells increased over time. The MBC of the recovered biofilm cells after a second exposure to OPA was 0.58 ± 0.40 mM, a concentration similar to the MBC of planktonic cells. This study demonstrates that persister cells may survive in biocide-treated biofilms, even in the absence of EPS.
Assuntos
Biofilmes/efeitos dos fármacos , Desinfetantes/farmacologia , Viabilidade Microbiana/efeitos dos fármacos , Pseudomonas fluorescens/citologia , Pseudomonas fluorescens/efeitos dos fármacos , o-Ftalaldeído/farmacologia , Biofilmes/crescimento & desenvolvimento , Reatores Biológicos , Farmacorresistência Bacteriana/efeitos dos fármacos , Testes de Sensibilidade Microbiana , Fenótipo , Plâncton/efeitos dos fármacos , Plâncton/crescimento & desenvolvimento , Pseudomonas fluorescens/fisiologiaRESUMO
Glutaraldehyde (GLUT) was evaluated for control of single and dual species biofilms of Bacillus cereus and Pseudomonas fluorescens on stainless steel surfaces using a chemostat system. The biofilms were characterized in terms of mass, cell density, total and matrix proteins and polysaccharides. The control action of GLUT was assessed in terms of inactivation and removal of biofilm. Post-biocide action was characterized 3, 7, 12, 24, 48 and 72 h after treatment. Tests with planktonic cells were also performed for comparison. The results demonstrated that in dual species biofilms the metabolic activity, cell density and the content of matrix proteins were higher than those of either single species. Planktonic B. cereus was more susceptible to GLUT than P. fluorescens. The biocide susceptibility of dual species planktonic cultures was an average of each single species. Planktonic cells were more susceptible to GLUT than their biofilm counterparts. Biofilm inactivation was similar for both of the single biofilms while dual biofilms were more resistant than single species biofilms. GLUT at 200 mg l(-1) caused low biofilm removal (<10%). Analysis of the post-biocide treatment data revealed the ability of biofilms to recover their activity over time. However, 12 h after biocide application, sloughing events were detected for both single and dual species biofilms, but were more marked for those formed by P. fluorescens (removal >40% of the total biofilm). The overall results suggest that GLUT exerts significant antimicrobial activity against planktonic bacteria and a partial and reversible activity against B. cereus and P. fluorescens single and dual species biofilms. The biocide had low antifouling effects when analysed immediately after treatment. However, GLUT had significant long-term effects on biofilm removal, inducing significant sloughing events (recovery in terms of mass 72 h after treatment for single biofilms and 42 h later for dual biofilms). In general, dual species biofilms demonstrated higher resistance and resilience to GLUT exposure than either of the single species biofilms. P. fluorescens biofilms were more susceptible to the biocide than B. cereus biofilms.
Assuntos
Bacillus cereus/efeitos dos fármacos , Incrustação Biológica/prevenção & controle , Desinfetantes/farmacologia , Glutaral/farmacologia , Pseudomonas fluorescens/efeitos dos fármacos , Bacillus cereus/fisiologia , Biomassa , Contagem de Colônia Microbiana , Farmacorresistência Bacteriana , Fenótipo , Pseudomonas fluorescens/fisiologia , Microbiologia da ÁguaRESUMO
The study of biofilm ecology and interactions might help to improve our understanding of their resistance mechanisms to control strategies. Concerns that the diversity of the biofilm communities can affect disinfection efficacy have led us to examine the effect of two antimicrobial agents on two important spoilage bacteria. Studies were conducted on single and dual species biofilms of Bacillus cereus and Pseudomonas fluorescens. Biofilms were formed on a stainless steel rotating device, in a bioreactor, at a constant Reynolds number of agitation (Re(A)). Biofilm phenotypic characterization showed significant differences, mainly in the metabolic activity and both extracellular proteins and polysaccharides content. Cetyl trimethyl ammonium bromide (CTAB) and glutaraldehyde (GLUT) solutions in conjunction with increasing Re(A) were used to treat biofilms in order to assess their ability to kill and remove biofilms. B. cereus and P. fluorescens biofilms were stratified in a layered structure with each layer having differential tolerance to chemical and mechanical stresses. Dual species biofilms and P. fluorescens single biofilms had both the highest resistance to removal when pre-treated with CTAB and GLUT, respectively. B. cereus biofilms were the most affected by hydrodynamic disturbance and the most susceptible to antimicrobials. Dual biofilms were more resistant to antimicrobials than each single species biofilm, with a significant proportion of the population remaining in a viable state after exposure to CTAB or GLUT. Moreover, the species association increased the proportion of viable cells of both bacteria, comparatively to the single species scenarios, enhancing each other's survival to antimicrobials and the biofilm shear stress stability.
Assuntos
Biofilmes/efeitos dos fármacos , Compostos de Cetrimônio/farmacologia , Glutaral/farmacologia , Bacillus cereus/citologia , Bacillus cereus/efeitos dos fármacos , Bacillus cereus/fisiologia , Aderência Bacteriana/efeitos dos fármacos , Reatores Biológicos , Cetrimônio , Viabilidade Microbiana/efeitos dos fármacos , Fenótipo , Pseudomonas fluorescens/citologia , Pseudomonas fluorescens/efeitos dos fármacos , Pseudomonas fluorescens/fisiologia , Especificidade da EspécieRESUMO
Three selected Pseudomonas fluorescens strains (the type strain and two strains originally isolated from a dairy processing plant - D3-348 and D3-350) were used to form turbulent and laminar flow-generated biofilms under laboratorial conditions using flow cell reactors with stainless steel substrata. The D3-348 and D3-350 strains were also used to form dual biofilms. Biofilm phenotypic characteristics, such as respiratory activity, total and culturable cells, biomass, total and matrix proteins and polysaccharides were compared. Biofilm mechanical stability, as a major feature involved in biofilm persistence, was also assessed using a rotating device system. The results indicate that hydrodynamic conditions have a remarkable impact on biofilm phenotype. Turbulent biofilms were more active, had more mass per adhesion surface area, a higher number of total and culturable cells, a higher amount of total proteins per gram of biofilm, similar matrix proteins and identical (D3-348 and D3-350 single and dual biofilms) or smaller (type strain) total and matrix polysaccharides content than their laminar counterparts. Biofilms formed by the type strain revealed a considerable higher amount of total and culturable cells and a higher amount of total proteins (turbulent biofilms) and total and matrix polysaccharides per gram of biofilm than single and dual biofilms formed by the other strains. Mechanical stability assays disclosed that biofilms formed by both type and D3-348 strains had the highest resistance to removal when exposed to mechanical stress. Dual strain biofilms population analysis revealed an apparent co-existence, evidencing neutral interactions. The overall results provided useful information regarding a broad spectrum of P. fluorescens biofilm phenotypic parameters, which can contribute to control and model biofilm processes in food industry.
Assuntos
Proteínas de Bactérias/metabolismo , Biofilmes/crescimento & desenvolvimento , Reatores Biológicos , Polissacarídeos/metabolismo , Pseudomonas fluorescens/fisiologia , Biomassa , Biopolímeros/metabolismo , Contagem de Colônia Microbiana , Contaminação de Alimentos/análise , Contaminação de Alimentos/prevenção & controle , Fenótipo , RespiraçãoRESUMO
In the environment, many microorganisms coexist in communities competing for resources, and they are often associated as biofilms. The investigation of bacterial ecology and interactions may help to improve understanding of the ability of biofilms to persist. In this study, the behaviour of Bacillus cereus and Pseudomonas fluorescens in the planktonic and sessile states was compared. Planktonic tests were performed with single and dual species cultures in growth medium with and without supplemental FeCl3. B. cereus and P. fluorescens single cultures had equivalent growth behaviours. Also, when in co-culture under Fe-supplemented conditions, the bacteria coexisted and showed similar growth profiles. Under Fe limitation, 8 h after co-culture and over time, the number of viable B. cereus cells decreased compared with P. fluorescens. Spores were detected during the course of the experiment, but were not correlated with the decrease in the number of viable cells. This growth inhibitory effect was correlated with the release of metabolite molecules by P. fluorescens through Fe-dependent mechanisms. Biofilm studies were carried out with single and dual species using a continuous flow bioreactor rotating system with stainless steel (SS) substrata. Steady-state biofilms were exposed to a series of increasing shear stress forces. Analysis of the removal of dual species biofilms revealed that the outer layer was colonised mainly by B. cereus. This bacterium was able to grow in the outermost layers of the biofilm due to the inhibitory effect of P. fluorescens being decreased by the exposure of the cells to fresh culture medium. B. cereus also constituted the surface primary coloniser due to its favourable adhesion to SS. P. fluorescens was the main coloniser of the middle layers of the biofilm. Single and dual species biofilm removal data also revealed that B. cereus biofilms had the highest physical stability, followed by P. fluorescens biofilms. This study highlights the inadequacy of planktonic systems to mimic the behaviour of bacteria in biofilms and shows how the culturing system affects the action of antagonist metabolite molecules because dilution and consequent loss of activity occurred in continuously operating systems. Furthermore, the data demonstrate the biocontrol potential of P. fluorescens on the planktonic growth of B. cereus and the ability of the two species to coexist in a stratified biofilm structure.
Assuntos
Bacillus cereus/fisiologia , Biofilmes/crescimento & desenvolvimento , Plâncton/fisiologia , Pseudomonas fluorescens/fisiologia , Bacillus cereus/citologia , Aderência Bacteriana/fisiologia , Técnicas Bacteriológicas , Reatores Biológicos , Técnicas de Cocultura , Ferro/metabolismo , Plâncton/citologia , Pseudomonas fluorescens/citologia , Esporos Bacterianos/crescimento & desenvolvimento , Aço Inoxidável/química , Termodinâmica , Fatores de TempoRESUMO
The effect of the anionic surfactant sodium dodecyl sulfate (SDS) on Pseudomonas fluorescens biofilms was investigated using flow cell reactors with stainless steel substrata, under turbulent (Re = 5200) and laminar (Re = 2000) flow. Steady-state biofilms were exposed to SDS in single doses (0.5, 1, 3 and 7 mM) and biofilm respiratory activity and mass measured at 0, 3, 7 and 12 h after the SDS application. The effect of SDS on biofilm mechanical stability was assessed using a rotating bioreactor. Whilst high concentrations (7 mM) of SDS promoted significant biofilm inactivation, it did not significantly reduce biofouling. Turbulent and laminar flow-generated biofilms had comparable susceptibility to SDS application. Following SDS exposure, biofilms rapidly recovered over the following 12 h, achieving higher respiratory activity values than before treatment. This phenomenon of post-treatment recovery was more pronounced for turbulent flow-generated biofilms, with an increase in SDS concentration. The mechanical stability of the biofilms increased with surfactant application, except for SDS concentrations near the critical micellar concentration, as measured by biofilm removal due to an increase in external shear stress forces. The data suggest that although SDS exerts antimicrobial action against P. fluorescens biofilms, even if only partial and reversible, it had only limited antifouling efficacy, increasing biofilm mechanical stability at low concentrations and allowing significant and rapid recovery of turbulent flow-generated biofilms.