High Q-Factor Diamond Optomechanical Resonators with Silicon Vacancy Centers at Millikelvin Temperatures.

Phonons are envisioned as coherent intermediaries between different types of quantum systems. Engineered nanoscale devices, such as optomechanical crystals (OMCs), provide a platform to utilize phonons as quantum information carriers. Here we demonstrate OMCs in diamond designed for strong for interactions between phonons and a silicon vacancy (SiV) spin. Using optical measurements at millikelvin temperatures, we measure a line width of 13 kHz (Q-factor of ∼4.4 × 105) for a 6 GHz acoustic mode, a record for diamond in the GHz frequency range and within an order of magnitude of state-of-the-art line widths for OMCs in silicon. We investigate SiV optical and spin properties in these devices and outline a path toward a coherent spin-phonon interface.

Group CBT for men with intellectual disabilities and/or autism who have harmful sexual behaviour.

OBJECTIVES: Men with intellectual disabilities and/or autism sometimes engage in harmful sexual behaviour (HSB), but it may be harder for them to access treatment, than it is for non-disabled men. The aim of this study was to evaluate the effect of attending an adapted CBT group, known as SOTSEC-ID, on men with intellectual disabilities and/or autism who had HSB. METHOD: Ninety-eight men from intellectual disability services, who had ID and/or autism and a history of HSB were recruited, and they received group CBT for a year (46 of these men have been previously reported). Harmful sexual behaviour, sexual knowledge, distorted cognitions and victim empathy were measured before and after treatment, and at 6 month follow-up. RESULTS: There were low levels of further harmful sexual behaviour: 12% of men engaged in further HSB during the 1-year period of the group, and 8% engaged in further HSB in the 6-month follow-up period. There were also significant improvements in sexual knowledge, distorted cognitions and victim empathy following treatment, maintained at 6-month follow-up. Men with autism showed significantly more non-contact HSB, were less likely to have been interviewed by police and had higher rates of further HSB, compared to men without autism. CONCLUSIONS: It is concluded that SOTSEC-ID is a promising treatment for men with ID/autism and HSB. Nevertheless, the study had a number of limitations and lacked a control group, so there is now an urgent need for a proper controlled study.

Sub-1 Volt and high-bandwidth visible to near-infrared electro-optic modulators.

Integrated electro-optic (EO) modulators are fundamental photonics components with utility in domains ranging from digital communications to quantum information processing. At telecommunication wavelengths, thin-film lithium niobate modulators exhibit state-of-the-art performance in voltage-length product (VπL), optical loss, and EO bandwidth. However, applications in optical imaging, optogenetics, and quantum science generally require devices operating in the visible-to-near-infrared (VNIR) wavelength range. Here, we realize VNIR amplitude and phase modulators featuring VπL's of sub-1 V ⋅ cm, low optical loss, and high bandwidth EO response. Our Mach-Zehnder modulators exhibit a VπL as low as 0.55 V ⋅ cm at 738 nm, on-chip optical loss of ~0.7 dB/cm, and EO bandwidths in excess of 35 GHz. Furthermore, we highlight the opportunities these high-performance modulators offer by demonstrating integrated EO frequency combs operating at VNIR wavelengths, with over 50 lines and tunable spacing, and frequency shifting of pulsed light beyond its intrinsic bandwidth (up to 7x Fourier limit) by an EO shearing method.

Spectral control of nonclassical light pulses using an integrated thin-film lithium niobate modulator.

Manipulating the frequency and bandwidth of nonclassical light is essential for implementing frequency-encoded/multiplexed quantum computation, communication, and networking protocols, and for bridging spectral mismatch among various quantum systems. However, quantum spectral control requires a strong nonlinearity mediated by light, microwave, or acoustics, which is challenging to realize with high efficiency, low noise, and on an integrated chip. Here, we demonstrate both frequency shifting and bandwidth compression of heralded single-photon pulses using an integrated thin-film lithium niobate (TFLN) phase modulator. We achieve record-high electro-optic frequency shearing of telecom single photons over terahertz range (±641 GHz or ±5.2 nm), enabling high visibility quantum interference between frequency-nondegenerate photon pairs. We further operate the modulator as a time lens and demonstrate over eighteen-fold (6.55 nm to 0.35 nm) bandwidth compression of single photons. Our results showcase the viability and promise of on-chip quantum spectral control for scalable photonic quantum information processing.

Optical bi-stability in cubic silicon carbide microring resonators.

We measure the photothermal nonlinear response in suspended cubic silicon carbide (3C-SiC) and 3C-SiC-on-insulator (SiCOI) microring resonators. Bi-stability and thermo-optic hysteresis is observed in both types of resonators, with the suspended resonators showing a stronger response. A photothermal nonlinear index of 4.02×10-15 m2/W is determined for the suspended resonators, while the SiCOI resonators demonstrate one order of magnitude lower photothermal nonlinear index of 4.32×10-16 m2/W. Cavity absorption and temperature analysis suggest that the differences in thermal bi-stability are due to variations in waveguide absorption, likely from crystal defect density differences throughout the epitaxially grown layers. Furthermore, coupled mode theory model shows that the strength of the optical bi-stability, in suspended and SiCOI resonators can be engineered for high power or nonlinear applications.

Mirror-induced reflection in the frequency domain.

Mirrors are ubiquitous in optics and are used to control the propagation of optical signals in space. Here we propose and demonstrate frequency domain mirrors that provide reflections of the optical energy in a frequency synthetic dimension, using electro-optic modulation. First, we theoretically explore the concept of frequency mirrors with the investigation of propagation loss, and reflectivity in the frequency domain. Next, we explore the mirror formed through polarization mode-splitting in a thin-film lithium niobate micro-resonator. By exciting the Bloch waves of the synthetic frequency crystal with different wave vectors, we show various states formed by the interference between forward propagating and reflected waves. Finally, we expand on this idea, and generate tunable frequency mirrors as well as demonstrate trapped states formed by these mirrors using coupled lithium niobate micro-resonators. The ability to control the flow of light in the frequency domain could enable a wide range of applications, including the study of random walks, boson sampling, frequency comb sources, optical computation, and topological photonics. Furthermore, demonstration of optical elements such as cavities, lasers, and photonic crystals in the frequency domain, may be possible.

Spectrally separable photon-pair generation in dispersion engineered thin-film lithium niobate.

Existing nonlinear-optic implementations of pure, unfiltered heralded single-photon sources do not offer the scalability required for densely integrated quantum networks. Additionally, lithium niobate has hitherto been unsuitable for such use due to its material dispersion. We engineer the dispersion and the quasi-phasematching conditions of a waveguide in the rapidly emerging thin-film lithium niobate platform to generate spectrally separable photon pairs in the telecommunications band. Such photon pairs can be used as spectrally pure heralded single-photon sources in quantum networks. We estimate a heralded-state spectral purity of >94% based on joint spectral intensity measurements. Further, a joint spectral phase-sensitive measurement of the unheralded time-integrated second-order correlation function yields a heralded-state purity of (86±5)%.

Diamond mirrors for high-power continuous-wave lasers.

High-power continuous-wave (CW) lasers are used in a variety of areas including industry, medicine, communications, and defense. Yet, conventional optics, which are based on multi-layer coatings, are damaged when illuminated by high-power CW laser light, primarily due to thermal loading. This hampers the effectiveness, restricts the scope and utility, and raises the cost and complexity of high-power CW laser applications. Here we demonstrate monolithic and highly reflective mirrors that operate under high-power CW laser irradiation without damage. In contrast to conventional mirrors, ours are realized by etching nanostructures into the surface of single-crystal diamond, a material with exceptional optical and thermal properties. We measure reflectivities of greater than 98% and demonstrate damage-free operation using 10 kW of CW laser light at 1070 nm, focused to a spot of 750 µm diameter. In contrast, we observe damage to a conventional dielectric mirror when illuminated by the same beam. Our results initiate a new category of optics that operate under extreme conditions, which has potential to improve or create new applications of high-power lasers.

Integrated silicon carbide electro-optic modulator.

Owing to its attractive optical and electronic properties, silicon carbide is an emerging platform for integrated photonics. However an integral component of the platform is missing-an electro-optic modulator, a device which encodes electrical signals onto light. As a non-centrosymmetric crystal, silicon carbide exhibits the Pockels effect, yet a modulator has not been realized since the discovery of this effect more than three decades ago. Here we design, fabricate, and demonstrate a Pockels modulator in silicon carbide. Specifically, we realize a waveguide-integrated, small form-factor, gigahertz-bandwidth modulator that operates using complementary metal-oxide-semiconductor (CMOS)-level voltages on a thin film of silicon carbide on insulator. Our device is fabricated using a CMOS foundry compatible fabrication process and features no signal degradation, no presence of photorefractive effects, and stable operation at high optical intensities (913 kW/mm2), allowing for high optical signal-to-noise ratios for modern communications. Our work unites Pockels electro-optics with a CMOS foundry compatible platform in silicon carbide.

Long-Lived Solid-State Optical Memory for High-Rate Quantum Repeaters.

We argue that long optical storage times are required to establish entanglement at high rates over large distances using memory-based quantum repeaters. Triggered by this conclusion, we investigate the 795.325 nm^{3} H_{6}↔^{3}H_{4} transition of Tm:Y_{3}Ga_{5}O_{12} (Tm:YGG). Most importantly, we find that the optical coherence time can reach 1.1 ms, and, using laser pulses, we demonstrate optical storage based on the atomic frequency comb protocol during up to 100 µs as well as a memory decay time T_{m} of 13.1 µs. Possibilities of how to narrow the gap between the measured value of T_{m} and its maximum of 275 µs are discussed. In addition, we demonstrate multiplexed storage, including with feed-forward selection, shifting and filtering of spectral modes, as well as quantum state storage using members of nonclassical photon pairs. Our results show the potential of Tm:YGG for creating multiplexed quantum memories with long optical storage times, and open the path to repeater-based quantum networks with high entanglement distribution rates.

On-chip electro-optic frequency shifters and beam splitters.

Efficient frequency shifting and beam splitting are important for a wide range of applications, including atomic physics1,2, microwave photonics3-6, optical communication7,8 and photonic quantum computing9-14. However, realizing gigahertz-scale frequency shifts with high efficiency, low loss and tunability-in particular using a miniature and scalable device-is challenging because it requires efficient and controllable nonlinear processes. Existing approaches based on acousto-optics6,15-17, all-optical wave mixing10,13,18-22 and electro-optics23-27 are either limited to low efficiencies or frequencies, or are bulky. Furthermore, most approaches are not bi-directional, which renders them unsuitable for frequency beam splitters. Here we demonstrate electro-optic frequency shifters that are controlled using only continuous and single-tone microwaves. This is accomplished by engineering the density of states of, and coupling between, optical modes in ultralow-loss waveguides and resonators in lithium niobate nanophotonics28. Our devices, consisting of two coupled ring-resonators, provide frequency shifts as high as 28 gigahertz with an on-chip conversion efficiency of approximately 90 per cent. Importantly, the devices can be reconfigured as tunable frequency-domain beam splitters. We also demonstrate a non-blocking and efficient swap of information between two frequency channels with one of the devices. Finally, we propose and demonstrate a scheme for cascaded frequency shifting that allows shifts of 119.2 gigahertz using a 29.8 gigahertz continuous and single-tone microwave signal. Our devices could become building blocks for future high-speed and large-scale classical information processors7,29 as well as emerging frequency-domain photonic quantum computers9,11,14.

Integrated microwave acousto-optic frequency shifter on thin-film lithium niobate.

Electrically driven acousto-optic devices that provide beam deflection and optical frequency shifting have broad applications from pulse synthesis to heterodyne detection. Commercially available acousto-optic modulators are based on bulk materials and consume Watts of radio frequency power. Here, we demonstrate an integrated 3-GHz acousto-optic frequency shifter on thin-film lithium niobate, featuring a carrier suppression over 30 dB. Further, we demonstrate a gigahertz-spaced optical frequency comb featuring more than 200 lines over a 0.6-THz optical bandwidth by recirculating the light in an active frequency shifting loop. Our integrated acousto-optic platform leads to the development of on-chip optical routing, isolation, and microwave signal processing.

High-Q suspended optical resonators in 3C silicon carbide obtained by thermal annealing.

We fabricate suspended single-mode optical waveguides and ring resonators in 3C silicon carbide (SiC) that operate at telecommunication wavelength, and leverage post-fabrication thermal annealing to minimize optical propagation losses. Annealed optical resonators yield quality factors of over 41,000, which corresponds to a propagation loss of 7 dB/cm, and is a significant improvement over the 24 dB/cm in the case of the non-annealed chip. This improvement is attributed to the enhancement of SiC crystallinity and a significant reduction of waveguide surface roughness, from 2.4 nm to below 1.7 nm. The latter is attributed to surface layer oxide growth during the annealing step. We confirm that the thermo-optic coefficient, an important parameter governing high-power and temperature-dependent performance of SiC, does not vary with annealing and is comparable to that of bulk SiC. Our annealing-based approach, which is especially suitable for suspended structures, offers a straightforward way to realize high-performance 3C-SiC integrated circuits.

Prehospital critical care is associated with increased survival in adult trauma patients in Scotland.

BACKGROUND: Scotland has three prehospital critical care teams (PHCCTs) providing enhanced care support to a usually paramedic-delivered ambulance service. The effect of the PHCCTs on patient survival following trauma in Scotland is not currently known nationally. METHODS: National registry-based retrospective cohort study using 2011-2016 data from the Scottish Trauma Audit Group. 30-day mortality was compared between groups after multivariate analysis to account for confounding variables. RESULTS: Our data set comprised 17 157 patients, with a mean age of 54.7 years and 8206 (57.5%) of male gender. 2877 patients in the registry were excluded due to incomplete data on their level of prehospital care, leaving an eligible group of 14 280. 13 504 injured adults who received care from ambulance clinicians (paramedics or technicians) were compared with 776 whose care included input from a PHCCT. The median Injury Severity Score (ISS) across all eligible patients was 9; 3076 patients (21.5%) met the ISS>15 criterion for major trauma. Patients in the PHCCT cohort were statistically significantly (all p<0.01) more likely to be male; be transported to a prospective Major Trauma Centre; have suffered major trauma; have suffered a severe head injury; be transported by air and be intubated prior to arrival in hospital. Following multivariate analysis, the OR for 30-day mortality for patients seen by a PHCCT was 0.56 (95% CI 0.36 to 0.86, p=0.01). CONCLUSION: Prehospital care provided by a physician-led critical care team was associated with an increased chance of survival at 30 days when compared with care provided by ambulance clinicians.

Coherent acoustic control of a single silicon vacancy spin in diamond.

Phonons are considered to be universal quantum transducers due to their ability to couple to a wide variety of quantum systems. Among these systems, solid-state point defect spins are known for being long-lived optically accessible quantum memories. Recently, it has been shown that inversion-symmetric defects in diamond, such as the negatively charged silicon vacancy center (SiV), feature spin qubits that are highly susceptible to strain. Here, we leverage this strain response to achieve coherent and low-power acoustic control of a single SiV spin, and perform acoustically driven Ramsey interferometry of a single spin. Our results demonstrate an efficient method of spin control for these systems, offering a path towards strong spin-phonon coupling and phonon-mediated hybrid quantum systems.

Impact of drug and equipment preparation on pre-hospital emergency Anaesthesia (PHEA) procedural time, error rate and cognitive load.

BACKGROUND: We examined the effect of advanced preparation and organisation of equipment and drugs for Pre-hospital Emergency Anaesthesia (PHEA) and tracheal intubation on procedural time, error rates, and cognitive load. METHODS: This study was a randomised, controlled experiment with a crossover design. Clinical teams (physician and paramedic) from the Emergency Medical Retrieval Service and the Scottish Air Ambulance Division were randomised to perform a standardised pre-hospital clinical simulation using either unprepared (standard practice) or pre-prepared (experimental method) PHEA equipment and drugs. Following a two-week washout period, each team performed the corresponding simulation. The primary outcome was intervention time. Secondary outcomes were safety-related incidents and errors, and degree of cognitive load. RESULTS: In total 23 experiments were completed, 12 using experimental method and 11 using standard practice. Time required to perform PHEA using the experimental method was significantly shorter than with standard practice (11,45 versus 20:59) minutes: seconds; p = < 0.001). The experimental method also significantly reduced procedural errors (0 versus 9, p = 0.007) and the cognitive load experienced by the intubator assistant (41.9 versus 68.7 mm, p = 0.006). CONCLUSIONS: Pre-preparation of PHEA equipment and drugs resulted in safer performance of PHEA and has the potential to reduce on-scene time by up to a third.

Clinician tasking in ambulance control improves the identification of major trauma patients and pre-hospital critical care team tasking.

INTRODUCTION: Trauma remains the fourth leading cause of death in western countries and is the leading cause of death in the first four decades of life. NICE guidance in 2016 advocated the attendance of pre-hospital critical care trauma team (PHCCT) in the pre-hospital stage of the care of patients with major trauma. Previous publications support dispatch by clinicians who are also actively involved in the delivery of the PHCCT service; however there is a lack of objective outcome measures across the current reviewed evidence base. In this study, we aimed to assess the accuracy of PHCCT clinician led dispatch, when measured by Injury Severity Score (ISS). METHODS: A retrospective cohort study over a 2 year period pre and post implementation of a PHCCT clinician led dispatch of PHCCT for potential major trauma patients, using national ambulance data combined with national trauma registry data. RESULTS: A total of 99,702 trauma related calls were made to SAS including 495 major trauma patients with an ISS >15, and a total of 454 dispatches of a PHCCT. Following the introduction of a PHCCT clinician staffed trauma desk, the sensitivity for major trauma was increased from 11.3% to 25.9%. The difference in sensitivity between the pre and post trauma desk group was significant at 14.6% (95% CI 7.4%-21.4%, p < .001). DISCUSSION: The results from the study support the results from other studies recommending that a PHCCT clinician should be located in ambulance control to identify major trauma patients as early as possible and co-ordinate the response.

Spectral multiplexing for scalable quantum photonics using an atomic frequency comb quantum memory and feed-forward control.

Future multiphoton applications of quantum optics and quantum information science require quantum memories that simultaneously store many photon states, each encoded into a different optical mode, and enable one to select the mapping between any input and a specific retrieved mode during storage. Here we show, with the example of a quantum repeater, how to employ spectrally multiplexed states and memories with fixed storage times that allow such mapping between spectral modes. Furthermore, using a Ti:Tm:LiNbO_{3} waveguide cooled to 3 K, a phase modulator, and a spectral filter, we demonstrate storage followed by the required feed-forward-controlled frequency manipulation with time-bin qubits encoded into up to 26 multiplexed spectral modes and 97% fidelity.

Two-photon interference of weak coherent laser pulses recalled from separate solid-state quantum memories.

Quantum memories allowing reversible transfer of quantum states between light and matter are central to quantum repeaters, quantum networks and linear optics quantum computing. Significant progress regarding the faithful transfer of quantum information has been reported in recent years. However, none of these demonstrations confirm that the re-emitted photons remain suitable for two-photon interference measurements, such as C-NOT gates and Bell-state measurements, which constitute another key ingredient for all aforementioned applications. Here, using pairs of laser pulses at the single-photon level, we demonstrate two-photon interference and Bell-state measurements after either none, one or both pulses have been reversibly mapped to separate thulium-doped lithium niobate waveguides. As the interference is always near the theoretical maximum, we conclude that our solid-state quantum memories, in addition to faithfully mapping quantum information, also preserve the entire photonic wavefunction. Hence, our memories are generally suitable for future applications of quantum information processing that require two-photon interference.

Conditional detection of pure quantum states of light after storage in a Tm-doped waveguide.

We demonstrate the conditional detection of time-bin qubits after storage in and retrieval from a photon-echo-based waveguide quantum memory. Each qubit is encoded into one member of a photon pair produced via spontaneous parametric down-conversion, and the conditioning is achieved by the detection of the other member of the pair. By performing projection measurements with the stored and retrieved photons onto different bases, we obtain an average storage fidelity of 0.885±0.020, which exceeds the relevant classical bounds and shows the suitability of our integrated light-matter interface for future applications of quantum information processing.