Assessment of energy cane bagasse-derived cellulosic microfiber hydrogels on the growth of potted chili peppers.

Energy cane (Saccharum spp.) bagasse, a type of biomass waste, is often underutilized, burned, or left to dispose of itself. This research aimed to evaluate the potential of converting this bagasse into high-value cellulosic microfiber hydrogels (CMH) for water conservation and potted chili (Capsicum annuum) plant growth. CMH offers a biodegradable alternative to synthetic polyacrylamide (PA) hydrogels and provides the dual benefit of improved water use efficiency and reduced environmental impact due to their ability to naturally break down in the soil. In this study, CMH and PA hydrogels were compared for water retention value (WRV), and reswelling kinetics (RK), as well as their effects on plant height, leaf count, root-to-shoot ratios (R:S ratio), and soil moisture retention. Two versions of CMH, CMH65 and CMH60, were prepared with varying cellulose-chitosan ratios: 65:35 and 60:40, respectively. The hydrogels were tested at four concentrations (0, 0.5, 1.0, and 2.0% w/w) by being mixed in Promix® soil. Observations were recorded over a 16-day period without additional water. Also, the WRV of hydrogels at 240 min and RK (10-180 min) were compared over three swelling-deswelling cycles. The PA hydrogel exhibited higher WRV (exceeding 450%) compared to CMH (45%). However, PA led to reduced plant height, leaf count, and R:S ratio when compared to higher concentrations of CMH65 and CMH60. In general, CMH60 (0.5% and 2%) exhibited superior plant growth. All hydrogels exhibited a significant decrease (p < 0.05) in WRV across successive cycles. Notably, during cycle 2, both CMH65 and CMH60 peaked in WRV at 10 and 20 min, respectively, compared to cycle 1. This study demonstrates the potential of bagasse-derived hydrogels as a value-added product for water conservation and crop growth.

Editorial for Advanced Antennas for Wireless Communication Systems.

In recent years, there has been a significant expansion in wireless communication, evolving into a global network connecting billions of entities, including individuals and enterprises [...].

Development of metasurface based hyperthermia lens applicator for heating of cancerous tissues.

Numerous designs and methods have been examined to improve penetration depth (PD), but there is a need for research to explore the potential increase in PD through uniform heating, a compact applicator, and low input power. This paper presents metasurface based hyperthermia lens applicator with water bolus for uniform heating of cancerous tissues. The proposed applicator consists of a stacked spiral antenna and a spiral-shaped frequency selective surface as a superstrate. The spiral antenna and superstrate are optimized on a low cost FR4 substrate having a size of 32 × 32 × 3.27mm3 and 10 × 10 × 1.6mm3 (size of the unit cell), respectively. The proposed applicator is simulated with heterogeneous phantom (skin, fat, and muscle layers) and with the Gustav voxel model with and without a water bolus layer. The number of unit cells in the superstrate is optimized to direct the maximum energy toward the tumor location. The performance study of the applicator is carried out in terms of specific absorption rate, PD, and effective field size. Further, thermal analysis is carried out with 1.9 W of input power at the antenna port, and the highest 44.7 °C temperature rise is obtained. The cancerous tissue's (tumor) surrounding temperature is between 41 and 45 °C, which is adequate for efficient hyperthermia treatment. Finally, the proposed metasurface hyperthermia lens applicator is fabricated and experimentally validated in a mimicked phantom's presence. Supplementary Information: The online version contains supplementary material available at 10.1007/s13534-023-00300-z.

Diagnostic Accuracy of Cartridge Based Nucleic Acid Amplification Test (CBNAAT) in Stool Samples in Pediatric Tuberculosis.

OBJECTIVES: To find out the diagnostic accuracy of stool Cartridge-based nucleic acid amplification test (CBNAAT) as an alternate method as compared to CBNAAT in gastric aspirate (GA) samples in pediatric tuberculosis (TB). METHODS: This cross-sectional study was performed at Department of Pediatrics of a tertiary care hospital. Children aged 0-18 y diagnosed as presumptive tuberculosis were consecutively enrolled. Gastric aspirate and corresponding stool sample was subjected to CBNAAT and its performance was compared in both samples using appropriate statistical tests. RESULTS: Total 100 patients were enrolled in the study. Diagnostic accuracy of CBNAAT was 81% and 80% in gastric aspirate and stool sample respectively. On comparing gastric aspirate with corresponding stool sample there was 97% agreement, with Cohen's kappa value of 0.94. There was a statistically significant association observed between gastric aspirate CBNAAT and stool CBNAAT p <0.001 using chi square test. Sensitivity of gastric aspirate CBNAAT and stool CBNAAT was 75% and 73% respectively and specificity was 100% for both the samples compared against Composite Reference Standard (CRS). CONCLUSIONS: The diagnostic accuracy of stool CBNAAT is comparable to GA CBNAAT in children and can be used as a good alternative to gastric aspirate for diagnosis of pulmonary and disseminated tuberculosis in children.

Design of customized implants and 3D printing of symmetric and asymmetric cranial cavities.

A methodology has been developed in this work to design customized cranial implants from computed tomography (CT) scan images for symmetric as well as asymmetric defects. The two-dimensional CT scan images were converted into three-dimensional geometric models using software packages. Two cases of cranial cavities at different locations were considered for implant design using two different approaches. Case 1 is having a symmetric cranial cavity while Case 2 has an asymmetric frontal cranial cavity. The craniums with defects were 3D reconstructed. Customized cranial implants were made for the two cases. In Case 1, symmetry was used to design the cranial implant. Symmetry cannot be used in Case 2. In Case 2, the implant was designed by blending from the surface available adjacent to the missing portion of the cranium. 3D reconstructed bone models and customized implants were 3D printed in poly-lactic acid (PLA) using a fused deposition modeling process for form and fit evaluation. Finite element analysis was performed to compare the mechanical behavior of bone, and the two biomaterials - polyether ether ketone (PEEK), and Ti6Al4V. Static structural finite element analysis was performed to simulate the impact of falling off a bicycle with an impact on the cranial implants in the two cases. The load was modeled as a normal force acting on the surface of the implant. It was found that the stresses in the titanium alloy are comparable to those of PEEK for both the cases. However, the strains and deformation were found to be much smaller compared to those in PEEK. Therefore, the titanium alloy is the material of choice for both the cases among the materials under consideration. The designed implants are solid hence may face the challenge in bone ingrowth. In future studies, the implant can be made porous by incorporating a lattice structure to enhance osseointegration and promote bone ingrowth. Implants for both symmetric and asymmetric defect cases in cranium were successfully designed.

People's perceptions on COVID-19 vaccination: an analysis of twitter discourse from four countries.

More than six and half million people have died as a result of the COVID-19 pandemic till Dec 2022. Vaccination is the most effective means to prevent mortality and infection attributed to COVID-19. Identifying public attitudes and perceptions on COVID-19 vaccination is essential to strengthening the vaccination programmes. This study aims to identify attitudes and perceptions of twitter users towards COVID-19 vaccinations in four different countries. A sentiment analysis of 663,377 tweets from October 2020 to September 2022 from four different countries (i.e., India, South Africa, UK, and Australia) was conducted. Text mining using roBERTA (Robustly Optimized Bert Pretraining approach) python library was used to identify the polarity of people's attitude as "negative", "positive" or "neutral" based on tweets. A sample of 2000 tweets (500 from each country) were thematically analysed to explore the people's perception concerning COVID-19 vaccines across the countries. The attitudes towards COVID-19 vaccines varied by countries. Negative attitudes were observed to be highest in India (58.48%), followed by United Kingdom (33.22%), Australia (31.42%) and South Africa (28.88%). Positive attitudes towards vaccines were highest in the United Kingdom (21.09%). The qualitative analysis yielded eight themes namely (i) vaccine shortages, (ii) vaccine side-effects, (iii) distrust on COVID-19 vaccines, (iv) voices for vaccine equity, (v) awareness about vaccines, (vi) myth busters, (vii) vaccines work and (viii) vaccines are safe. The twitter discourse reflected the evolving situation of COVID-19 pandemic and vaccination strategies, lacunae and positives in the respective countries studied.

Impact of inflammatory cytokine and adipokine gene variations in the development of HIV-associated lipodystrophy.

Cytokines affect lipid and glucose metabolism and also alter the body's habitus. They play a role in the development of lipodystrophy syndrome. Adipocytes secrete the pro-inflammatory cytokines IL-1, TNF-α and IL-6. The plasma cytokine concentration is associated with the percentage and distribution of fat tissue in the body. The metabolic disturbances are strongly associated with increased levels of pro-inflammatory cytokines (IL-1, IL-6 and TNF-α). Plasma levels of cytokines such as TNF-α, IL-6 and leptin were found to be increased while plasma resistin levels were found to be variable in patients suffering from obesity and type II diabetes mellitus. Until now, limited information has been available on the polymorphism of cytokine and adipokine genes in patients of HIV-associated lipodystrophy (HIVLD), which can contribute to individual variations in susceptibility to metabolic diseases, especially to HIVLD. Hence, we studied the association of cytokine and adipokine gene polymorphisms in various diseases and their impact on HIVLD. We carry out an extensive search using several databases, including PubMed, EMBASE and Google Scholar. The distribution of cytokine and adipokine gene polymorphisms and their expression levels varied among various populations. We examined the variants of cytokine and adipokine genes, which can contribute to individual variations in susceptibility to metabolic diseases, especially to HIVLD. In the current review, we present a brief account of the risk factors of HIVLD, the pathogenesis of HIVLD and the polymorphism of cytokine and adipokine genes in various diseases with special reference to their impact on HIVLD.

A comparison of the quality of images of chest X-ray between handheld portable digital X-ray & routinely used digital X-ray machine.

Background & objectives: Chest X-ray (CXR) is an important screening tool for pulmonary tuberculosis (TB). Accessibility to CXR facilities in difficult-to-reach and underserved populations is a challenge. This can potentially be overcome by deploying digital X-ray machines that are portable. However, these portable X-ray machines need to be validated before their deployment in the field. Here, we compare the image quality of CXR taken by a newly developed handheld X-ray machine with routinely used reference digital X-ray machine through the conduct of a feasibility study. Methods: A total of 100 participants with suspected pulmonary TB were recruited from the outpatient departments of a medical college and a community health centre in Agra. Each participant underwent CXR twice, once with each machine. Both sets of de-identified images were independently read by two radiologists, who were blinded to the type of X-ray machine used. The primary outcome was agreement between image qualities produced by these two machines. Results: The intra-observer (radiologist) agreements regarding the status of the 15 CXR parameters ranged between 74 per cent and 100 per cent, with an unweighted mean of 87.2 per cent (95% confidence interval: 71.5-100). The median Cohen's kappa values for intra-observer agreement were 0.62 and 0.67 for radiologists 1 and 2, respectively. In addition, on comparison of the overall median score of quality of the image, the handheld machine images had a higher score for image quality. Interpretation & conclusions: The current study shows that a handheld X-ray machine, which is easy to use and can potentially be carried to any area, produces X-ray images with quality that is comparable to digital X-ray machines routinely used in health facilities.

Predicting COVID-19 statistics using machine learning regression model: Li-MuLi-Poly.

In this paper, linear regression (LR), multi-linear regression (MLR) and polynomial regression (PR) techniques are applied to propose a model Li-MuLi-Poly. The model predicts COVID-19 deaths happening in the United States of America. The experiment was carried out on machine learning model, minimum mean square error model, and maximum likelihood ratio model. The best-fitting model was selected according to the measures of mean square error, adjusted mean square error, mean square error, root mean square error (RMSE) and maximum likelihood ratio, and the statistical t-test was used to verify the results. Data sets are analyzed, cleaned up and debated before being applied to the proposed regression model. The correlation of the selected independent parameters was determined by the heat map and the Carl Pearson correlation matrix. It was found that the accuracy of the LR model best-fits the dataset when all the independent parameters are used in modeling, however, RMSE and mean absolute error (MAE) are high as compared to PR models. The PR models of a high degree are required to best-fit the dataset when not much independent parameter is considered in modeling. However, the PR models of low degree best-fits the dataset when independent parameters from all dimensions are considered in modeling.

Intestinal viral infections of nSARS-CoV2 in the Indian community: Risk of virus spread in India.

In December 2019, novel severe acute respiratory syndrome coronavirus 2 (nSARS-CoV-2) virus outbreaks emerged from Wuhan, China, and spread all over the world, including India. Molecular diagnosis of Coronavirus Disease 2019 (COVID) 19 for densely and highly populated countries like India is time-consuming. A few reports have described the successful diagnosis of nSARS-CoV-2 virus from sewage and wastewater samples contaminated with fecal matter, suggesting the diagnosis of COVID 19 from the same to raise an alarm about the community transmission of virus for implementation of evacuation and lockdown strategies. So far, the association between the detection of virus and its concentration in stool samples with severity of the disease and the presence or absence of gastrointestinal symptoms have been rarely reported. We led the search utilizing multiple databases, specifically PubMed (Medline), EMBASE, and Google Scholar. We conducted a literature survey on gastrointestinal infection and the spread of this virus through fecal-oral transmission. Reports suggested that the existence and persistence of nSARS-CoV-2 in anal/rectal swabs and stool specimens for a longer period of time than in nasopharyngeal swabs provides a strong tenable outcome of gastrointestinal contamination and dissemination of this infection via potential fecal-oral transmission. This review may be helpful to conduct further studies to address the enteric involvement and excretion of nSARS-CoV-2 RNA in feces and control the community spread in both COVID-19 patients ahead of the onset of symptoms and in asymptomatic individuals through wastewater and sewage surveillance as an early indication of infection. The existence of the viral genome and active viral particle actively participate in genomic variations. Hence, we comprehended the enteric spread of different viruses amongst communities with special reference to nSARS-CoV-2.

Deep Learning Approach for Analyzing the COVID-19 Chest X-Rays.

PURPOSE: The purpose of this study is to analyze the utility of Convolutional Neural Network (CNN) in medical image analysis. In this study, deep learning (DL) models were used to classify the X-ray into COVID, viral pneumonia, and normal categories. MATERIALS AND METHODS: In this study, we have compared the results 9 layers CNN model (9 LC) developed by us with 2 transfer learning models (Visual Geometry Group) 16 and VGG19. Two different datasets used in this study were obtained from the Kaggle database and the Radiodiagnosis department of our institution. RESULTS: In our study, VGG16 yields the highest accuracy among all three models for different datasets as the Kaggle dataset-94.96% and the department of Radiodiagnosis dataset 85.71%. Although, the precision was found better while using 9 LC and VGG19 for both datasets. CONCLUSIONS: DL can help the radiologists in the speedy prediction of diseases and detecting minor features of the disease which may be missed by the human eye. In the present study, we have used three models, i.e.,, CNN with 9 LCs, VGG16, and VGG19 transfer learning models for the classification of X-ray images with good accuracy and precision. DL may play a key role in analyzing the medical image dataset.

Clinical Outcome of Cu-T 375 PPIUCD by Novel Dedicated Inserter Technique.

BACKGROUND: Intrauterine contraceptive devices (IUCDs) have been used by women in India for decades for spacing pregnancies. The increased institutional deliveries are an opportunity to provide women easy access to immediate PPIUCD services. Hence, we planned a study to evaluate the role of a novel dedicated inserter technique to improve compliance in postpartum women. MATERIALS AND METHODS: A prospective case-control study was conducted on postpartum women who underwent vaginal delivery. Cases were selected and divided randomly into two groups: the long inserter (n = 292) and control groups (n = 301 using conventional method of insertion). PPIUD was inserted by trained providers, followed by ultrasound within 48 hours of insertion to assess location and fundal placement of the IUD. Follow-up was done at 2 weeks, 6 weeks and 3 months post-insertion, and ultrasound assessment was done for IUD location at each visit. Final statistical analysis was done by using Chi-square test. RESULTS: There were fewer complications like pain and irregular bleeding in the long inserter group as compared to the control group. None of the cases reported missing thread in the long inserter group. Expulsion was seen in only one case from the long inserter group and five cases in the control group. Client satisfaction was good (98.4%) in the long inserter group, and with each follow-up, satisfaction level also improved in the control group (96.6%, p value- 0.03). CONCLUSION: The long inserter PPIUD insertion is a safe and convenient method. It has better ease of insertion, high fundal placement and good thread visibility and has reduced risk of infections as compared to the conventional PPIUD insertion technique.

Constructed wetland for improved wastewater management and increased water use efficiency in resource scarce SAT villages: a case study from Kothapally village, in India.

Evaluation a field-scale of constructed wetland (CW) for the treatment of rural wastewater (WW), in resource-scarce semi-arid tropic (SAT) villages, to provide improved wastewater management and increased water use efficiency, was the main objective of this study. A CW was commissioned in Kothapally village of Telangana to treat the wastewater generated from 100 households. The CW was vegetated with Typha latifolia and Canna indica. Average COD, sulfate and inorganic nitrogen removal efficiencies observed were 65%, 60% and 67% respectively, for the study period (one year). Removal efficiency for total coliform was consistently above 80%. The treated wastewater was stored in a farm pond and was utilized for irrigation in the nearby agricultural fields (0.6 ha). This perennial source of water, helped the nearby farmers to cultivate two additional crops, chickpea during rabi and sweetcorn during summer. The assured availability of water reduced their vulnerability to dry spells during the kharif by providing means for lifesaving irrigation. The biomass harvested from the constructed wetland was used as fodder for the livestock. A net additional income of Rs.70,000 (∼US$1,000) was realized by the farmers using the treated wastewater for cultivation. Similar constructed wetland-based wastewater management system can be scaled up across water scarce semi-arid tropics. Novelty statementField-scale performance evaluation of constructed wetland based wastewater treatment in a semi-arid tropic village is scarce in the literature. The work presented gives a feasibility assessment for this technology critical for its wide-scale application to augment rural wastewater management in resource poor villages.

ZnAlMCM-41: a very ecofriendly and reusable solid acid catalyst for the highly selective synthesis of 1,3-dioxanes by the Prins cyclization of olefins.

The Prins cyclization of styrene (SE) with paraformaldehyde (PFCHO) was conducted with mesoporous ZnAlMCM-41 catalysts for the synthesis of 4-phenyl-1,3-dioxane (4-PDO) using a liquid phase heterogeneous catalytic method. For a comparison study, the Prins cyclization reaction was also conducted over different nanoporous catalysts, e.g. mesoporous solid acid catalysts, AlMCM-41(21) and ZnMCM-41(21), and microporous catalysts, USY, Hß, HZSM-5, and H-mordenite. The recyclable mesoporous ZnAlMCM-41 catalysts were reused in this reaction to evaluate their catalytic stabilities. Since ZnAlMCM-41(75) has higher catalytic activity than other solid acid catalysts, washed ZnAlMCM-41(75)/W-ZnAlMCM-41(75) was prepared using an efficient chemical treatment method and used with various reaction parameters to find an optimal parameter for the highly selective synthesis of 4-PDO. W-ZnAlMCM-41(75) was also used in the Prins cyclization of olefins with PFCHO and formalin (FN, 37% aqueous solution of formaldehyde (FCHO)) under different reaction conditions to obtain 1,3-dioxanes, which are widely used as solvents or intermediates in organic synthesis. Based on the nature of catalysts used under different reaction conditions, a reasonable plausible reaction mechanism for the Prins cyclization of SE with PFCHO is proposed. Notably, it can be seen from the catalytic results of all catalysts that the W-ZnAlMCM-41(75) catalyst has higher 4-PDO selectivity with exceptional catalytic activity than other microporous and mesoporous catalysts.

Polymorphisms in miRNAs Gene (146a, 149, 196a) and Susceptibility to ARV-associated Hepatotoxicity.

BACKGROUND: Micro RNAs act as a regulatory layer for pharmacogenomics-related gene ex-pression. It could play a role in the efficacy and toxicity of the drug. The SNPs in miRNA genes are linked with different functional consequences. METHODS: Hence, we examined the miR (146a G/C, 149C/T, and 196aC/T) polymorphisms in 34 pa-tients with hepatotoxicity, 123 patients without hepatotoxicity, and 155 healthy controls using a PCR-RFLP method. RESULTS: In patients with hepatotoxicity, miR196aCT genotype and combined genotype GCT showed a risk for hepatotoxicity severity with borderline significance (OR=2.08, P=0.07; OR=2.88, P=0.06). While comparing between patients with hepatotoxicity and healthy controls, the combined genotypes CCC and GCT have shown a susceptibility to hepatotoxicity severity (OR=2.89, P=0.05; OR=2.60, P=0.09). The miR196TT genotype was associated with the individuals of advanced HIV disease stage (OR=3.68, P=0.04). In HIV patients who consumed alcohol and did not have hepatotoxicity, the miR 196aCT genotype showed susceptibility to acquisition of hepatotoxicity with borderline significance (OR=2.36, P=0.06). DISCUSSION: The miR149TT and 196aTT genotypes showed a risk of acquisition of hepatotoxicity to nevirapine usage among HIV patients without hepatotoxicity (OR=4.19, P=0.07; OR=1.97, P=0.84). In HIV patients with and without hepatotoxicity, the miR 196aCT genotype showed a risk of acquisition of hepatotoxicity and its severity to the combined use of alcohol and nevirapine, respectively (OR=14.18, P=0.08; OR=2.29, P=0.08). In multivariate logistic regression, taking nevirapine, 196aCT genotype had an independent risk factor for hepatotoxicity severity (OR=5.98, P=0.005; OR=2.38, P=0.05).Conclusion: In conclusion, miR196aC/T polymorphism and combined genotypes GCT and CCC may facilitate the risk for acquisition of hepatotoxicity and its severity.

Bacteriophage Therapy of Chronic Nonhealing Wound: Clinical Study.

BACKGROUND: A chronic wound usually results due to halt in the inflammatory phase of wound healing. Bacterial infections and biofilm formation are considered to be the basic cause of it. Chronic wounds significantly impair the quality of life. Antibiotics are now failing due to biofilm formation emergence of drug-resistant bacteria. OBJECTIVE: This study aims to see the effect of bacteriophage therapy in chronic nonhealing wound infected with the following bacteria: Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa. SUBJECT: Patients with chronic nonhealing wound not responding to conventional local debridement and antibiotic therapy were included in the study. The age of patients ranged between 12 and 60 years. METHOD: A total of 20 patients selected and tissue biopsies and wound swabs were taken for isolation of the bacteria. After confirmation of organism, a cocktail of customized bacteriophages was topically applied over the wound on alternate days till the wound surface became microbiologically sterile. Mean bacterial count and clinical assessment were done and compared at the time of presentation and after 3 and 5 doses of application. RESULTS: A significant improvement was observed in the wound healing, and there were no signs of infection clinically and microbiologically after 3 to 5 doses of topical bacteriophage therapy. Seven patients achieved complete healing on day21 during follow up while in others healthy margins and healthy granulation tissue were observed. CONCLUSION: Topical bacteriophage application may be quite effective therapy for the treatment of chronic nonhealing wounds.

Principles and Applications of Nucleic Acid Strand Displacement Reactions.

Dynamic DNA nanotechnology, a subfield of DNA nanotechnology, is concerned with the study and application of nucleic acid strand-displacement reactions. Strand-displacement reactions generally proceed by three-way or four-way branch migration and initially were investigated for their relevance to genetic recombination. Through the use of toeholds, which are single-stranded segments of DNA to which an invader strand can bind to initiate branch migration, the rate with which strand displacement reactions proceed can be varied by more than 6 orders of magnitude. In addition, the use of toeholds enables the construction of enzyme-free DNA reaction networks exhibiting complex dynamical behavior. A demonstration of this was provided in the year 2000, in which strand displacement reactions were employed to drive a DNA-based nanomachine (Yurke, B.; et al. Nature 2000, 406, 605-608). Since then, toehold-mediated strand displacement reactions have been used with ever increasing sophistication and the field of dynamic DNA nanotechnology has grown exponentially. Besides molecular machines, the field has produced enzyme-free catalytic systems, all DNA chemical oscillators and the most complex molecular computers yet devised. Enzyme-free catalytic systems can function as chemical amplifiers and as such have received considerable attention for sensing and detection applications in chemistry and medical diagnostics. Strand-displacement reactions have been combined with other enzymatically driven processes and have also been employed within living cells (Groves, B.; et al. Nat. Nanotechnol. 2015, 11, 287-294). Strand-displacement principles have also been applied in synthetic biology to enable artificial gene regulation and computation in bacteria. Given the enormous progress of dynamic DNA nanotechnology over the past years, the field now seems poised for practical application.

Glucose-Regulated TET2 Activity Links Cancer to Diabetes.

Diabetes has long been associated with an increased risk of cancer. While many molecular connections likely exist between the diseases, a recent publication discovered a clear molecular link, demonstrating that a glucose-dependent destabilisation of the DNA demethylase TET2 can promote malignant transformation via an AMPK-dependent phosphoswitch.

Post-Translational Modification, Phase Separation, and Robust Gene Transcription.

A few recent reports reveal fundamental new insights into the intricate regulatory mechanisms that govern RNA polymerase II (Pol II)-mediated gene transcription. Whereas a histidine-rich domain (HRD) triggers phase separation, promoting transcription elongation, a phosphatase switch promotes transcription termination. A paradigm that might govern the underlying mechanisms leading to robust gene transcription is now starting to emerge.