Comparative Evaluation of Extrusion of Apical Debris and Irrigant using Three Different Rotary Systems with Conventional Irrigation Methods - An In vitro Study.

Aim: The present study aimed to compare and evaluate debris and irrigant extrusion from curved root canals using different rotary systems. Materials and Methods: 30 single-rooted mandibular canines were used in this study. The crown was decoronated, working length and initial apical diameter were established. A 1.5% agar gel model was used in this study. Samples were assigned randomly into 3 groups (n = 10 teeth per group). Protaper Next, OneShape, and Hanudent files were used according to the manufacturers' instructions for canal instrumentation. Apically extruded debris and irrigant was were computed by deducting the initial weight of the test apparatus without a tooth from its weight after the biomechanical preparation. Comparative analysis of the amount of apically extruded debris and irrigant for each of the instruments and the experimental models was performed. Results: The statistically significant difference was found between the three experimental groups. (P < .05). Among all the groups least extrusion was observed in the Protaper Next group when used in combination with conventional irrigation. Conclusion: All the instruments produced apically extruded debris and irrigant, but the maximum was seen with OneShape among the experimental groups.

CO2 Activation with Manganese Tricarbonyl Complexes through an H-Atom Responsive Benzimidazole Ligand.

Herein, we report the synthesis and characterization of two manganese tricarbonyl complexes, MnI (HL)(CO)3 Br (1 a-Br) and MnI (MeL)(CO)3 Br (1 b-Br) (where HL=2-(2'-pyridyl)benzimidazole; MeL=1-methyl-2-(2'-pyridy)benzimidazole) and assayed their electrocatalytic properties for CO2 reduction. A redox-active pyridine benzimidazole ancillary ligand in complex 1 a-Br displayed unique hydrogen atom transfer ability to facilitate electrocatalytic CO2 conversion at a markedly lower reduction potential than that observed for 1 b-Br. Notably, a one-electron reduction of 1 a-Br yields a structurally characterized H-bonded binuclear Mn(I) adduct (2 a') rather than the typically observed Mn(0)-Mn(0) dimer, suggesting a novel method for CO2 activation. Combining advanced electrochemical, spectroscopic, and single crystal X-ray diffraction techniques, we demonstrate the use of an H-atom responsive ligand may reveal an alternative, low-energy pathway for CO2 activation by an earth-abundant metal complex catalyst.

A first glance into mixed phosphine-stibine moieties as protecting ligands for gold clusters.

Atomically precise gold clusters have attracted considerable research interest as their tunable structure-property relationships have resulted in widespread applications, from sensing and biomedicine to energetic materials and catalysis. In this article, the synthesis and optical properties of a novel [Au6(SbP3)2][PF6]2 cluster are reported. Despite the lack of spherical symmetry in the core, the cluster shows exceptional thermal and chemical stability. Detailed structural attributes and optical properties are evaluated experimentally and theoretically. This, to the best of our knowledge, is the first report of a gold cluster protected via synergistic multidentate coordination of stibine (Sb) and phosphine moieties (P). To further show that the latter moieties give a set of unique properties that differs from monodentate phosphine-protected [Au6(PPh3)6]2+, geometric structure, electronic structure, and optical properties are analyzed theoretically. In addition, this report also demonstrates the critical role of overall-ligand architecture in stabilizing mixed ligand-protected gold clusters.

Phytoremediation of toxic chemicals in aquatic environment with special emphasis on duckweed mediated approaches.

The discharge of toxic chemicals into water bodies and their linked detrimental effects on health is a global concern. Phytoremediation, an environment-friendly plant-based technology, has gained intensive interest over the last decades. For the aquatic phytoremediation process, the commonly available duckweeds have recently attracted significant attention due to their capacity to grow in diverse ecological niches, fast growth characteristics, suitable morphology for easy handling of biomass, and capacity to remove and detoxify various potential toxic elements and compounds. This review presents the progress of duckweed-assisted aquatic phytoremediation of toxic chemicals. A brief background of general phytoremediation processes, including the different phytoremediation methods and advances in understanding their underlying mechanisms, has been described. A summary of different approaches commonly practiced to assess the growth of the plants and their metal removal capacity in the phytoremediation process has also been included. A vast majority of studies have established that duckweed is an efficient plant catalyst to accumulate toxic heavy metals and organic contaminants, such as pesticides, fluorides, toxins, and aromatic compounds, reducing their toxicity from water bodies. The potential of this plant-based phytoremediation process for its downstream applications in generating value-added products for the rural economy and industrial interest has been identified.

Duckweed is an aquatic plant widely available in diverse ecosystems on the earth. Due to its fast growth in various environmental conditions, capacity to accumulate and transform different toxic chemicals, and a suitable morphology for handling and processing its biomass easily, duckweed has been projected as an efficient floating plant species for the aquatic phytoremediation technology. Moreover, the duckweed biomass generated from the post phytoremediation process may be transformed into various value-added products to support the rural economy.

Crystal Structure and Optical Properties of a Chiral Mixed Thiolate/Stibine-Protected Au18 Cluster.

We report the first example of a chiral mixed thiolate/stibine-protected gold cluster, formulated as Au18(S-Adm)8(SbPh3)4Br2 (where S-Adm = 1-adamantanethiolate). Single crystal X-ray crystallography reveals the origin of chirality in the cluster to be the introduction of the rotating arrangement of Au2(S-Adm)3 and Au(S-Adm)2 staple motifs on an achiral Au13 core and the subsequent capping of the remaining gold atoms by SbPh3 and Br- ligands. Interestingly, the structure and properties of this new Au18 cluster are found to be different from other reported achiral Au18 clusters and the only other stibine-protected [Au13(SbPh3)8Cl4]+ cluster. Detailed analyses on the geometric and electronic structures of the new cluster are carried out to gain insights into its optical properties as well as reactivity and stability of such mixed monolayer-protected clusters.

Possible involvement of agmatine in neuropharmacological actions of metformin in diabetic mice.

The risk of psychiatric and neurological disorders is significantly higher in patients with diabetes mellitus. Diabetic patients are more susceptible to depression, anxiety and memory impairment as compared with non-diabetic individuals. Metformin, a biguanide used for the management of type 2 diabetes mellitus (T2DM), promotes neurogenesis, enhances spatial memory function and protects the brain against oxidative imbalance beyond its effect on glucose metabolism. However, the exact mechanism of its neuropharmacological actions in T2DM is not known. We investigated the role of the agmatinergic system in neuropharmacological actions of metformin in diabetic mice. Diabetes was induced by the streptozotocin (STZ) injection and confirmed by high blood glucose levels. After 28 days, STZ treated mice exhibited memory impairment in radial arm maze, depression-like behavior in forced swim test and anxiety-like behavior in elevated plus maze along with increased expression of pro-inflammatory cytokines like TNF-α, IL-1ß, IL-6, IL-10 also, reduced agmatine and BDNF levels in the hippocampus and prefrontal cortex compared to the control animals. Metformin and agmatine alone or in combination, by once-daily administration during 14-27 day of the protocol significantly reversed the STZ induced high blood glucose levels, memory impairment, depression and anxiety-like behaviors. It also reduced neuro-inflammatory markers and increased agmatine and BDNF levels in the hippocampus and prefrontal cortex. The present study suggests the importance of endogenous agmatine in the neuropharmacological action of metformin in diabetic mice. The data projects agmatine and metformin combination as a potential therapeutic strategy for diabetes associated memory impairment, depression, anxiety, and other comorbidities.

Effect of Curing on Micro-Physical Performance of Polypropylene Fiber Reinforced and Silica Fume stabilized Expansive Soil Under Freezing Thawing Cycles.

This study presents the micro-physical investigation of polypropylene (PP) fiber-reinforced, and silica fume (SF) stabilized expansive soil (BC) subgrade. The coupling effect of soil, PP fiber, and SF has been evaluated under the freezing-thawing (F-T) cycle to assess the durability of treated BC Soil. The curing method and duration staggeringly influence the strength of SF treated BC soil; therefore, three different curing method, i.e., moisture-controlled curing (MC), gunny bag curing (GC), and water submerged curing (SC) to a period of 7, 14, and 28 days were considered. The BC soil has been reinforced with 0.25%, 0.50%, and 1.00% PP fiber and stabilized with 2%, 4%, 6% and 8% SF. The physical, chemical, and microstructural properties were determined before and after 2,4,6,8,10 F-T cycles. With the increase in SF content, the unconfined compressive strength of the expansive soil has been increased due to the formation of Calcium Silicate Hydrate (C-S-H) gel. The chemically inert, hydrophobic, non-corrosive nature, and higher tensile strength of PP fiber, it has a higher potential to reinforce the BC soil for durability under tensile failure. This research confirms the possibility of incorporating SF and PP Fiber in road work applications, with significant environmental benefits.

Exploring the sampling rate effect on digital time of flight response for fast scintillator detectors.

A systematic study is conducted to understand the digital time of flight (TOF) response for a pair of fast scintillator detectors; BaF2-LaBr3, BaF2-BC501A, and LaBr3-BC501A respectively. Coincidence signals from each detector pair, irradiated by 22Na source, are acquired by LeCroy HDO5000A digital oscilloscope. While operating the oscilloscope at 2.5 giga samples per second (GSPS) and 500 mega samples per second (MSPS) of sampling rates, over 10 k coincidence signals were collected for each pair of detectors. Data at different sampling rates; 1.66 GSPS, 1.25 GSPS, 833 MSPS, 625 MSPS, 333 MSPS, and 250 MSPS were generated by down-sampling method. Using anode signal, the photon arrival time marker is determined by digital constant fraction (DCF) algorithm for each detector pair on event-by-event basis. For a given rate, the algorithm is optimized at various delay and fraction values to get the minimum TOF dispersion. Mentioned pairs reveals the TOF resolution (FWHM) as; 0.58 ns, 0.79 ns, 0.907 ns and 0.53 ns, 0.94 ns, 1.08 ns at 250 MSPS and 2.5 GSPS respectively. While analysing the events, a saturation in the TOF width is observed from 500 MSPS onward. The saturated dispersion values for the aforementioned pairs are found to be 0.53 ns, 0.94 ns, and 1 ns respectively. Effect is being understood by calculating the optimum DCF transition region distribution for BC501A and LaBr3 detectors, reveals a constant curvature profile at different rates. To further explain the saturation effect on computational ground, a simple pulse fitting approach is adopted using Landau distribution. Event-by-Event processing of fitted pulses followed by TOF resolution calculation reproduces the experimental numbers.

Selective photocatalytic hydroxylation and epoxidation reactions by an iron complex using water as the oxygen source.

The iron complex [(bTAML)FeIII-OH2]- (1) selectively catalyses the photocatalytic hydroxylation and epoxidation reactions of alkanes and alkenes, respectively, using water as the oxygen-atom source. Upon the oxidation of unactivated alkanes, which included several substrates including natural products, hydroxylation was observed mostly at the 3° C-H bonds with 3° : 2° selectivity up to ∼100 : 1. When alkenes were used as the substrates, epoxides were predominantly formed with high yields. In the presence of H218O, more than 90% of the 18O-labelled oxygen atoms were incorporated into the hydroxylated and epoxide product indicating that water was the primary oxygen source. Mechanistic studies indicate the formation of an active [{(bTAML)FeIV}2-µ-oxo]2- (2) dimer from the starting complex 1via PCET. The subsequent disproportionation of 2 upon addition of substrate, leading to the formation of FeV(O), renders the high selectivity observed in these reactions.

Selective C-H Bond Oxidation Catalyzed by the Fe-bTAML Complex: Mechanistic Implications.

Nonheme iron complexes bearing tetradentate N-atom-donor ligands with cis labile sites show great promise for chemoselective aliphatic C-H hydroxylation. However, several challenges still limit their widespread application. We report a mechanism-guided development of a peroxidase mimicking iron complex based on the bTAML macrocyclic ligand framework (Fe-bTAML: biuret-modified tetraamido macrocyclic ligand) as a catalyst to perform selective oxidation of unactivated 3° bonds with unprecedented regioselectivity (3°:2° of 110:1 for adamantane oxidation), high stereoretention (99%), and turnover numbers (TONs) up to 300 using mCPBA as the oxidant. Ligand decomposition pathways involving acid-induced demetalation were identified, and this led to the development of more robust and efficient Fe-bTAML complexes that catalyzed chemoselective C-H oxidation. Mechanistic studies, which include correlation of the product formed with the FeV(O) reactive intermediates generated during the reaction, indicate that the major pathway involves the cleavage of C-H bonds by FeV(O). When these oxidations were performed in the presence of air, the yield of the oxidized product doubled, but the stereoretention remained unchanged. On the basis of 18O labeling and other mechanistic studies, we propose a mechanism that involves the dual activation of mCPBA and O2 by Fe-bTAML, leading to formation of the FeV(O) intermediate. This high-valent iron oxo remains the active intermediate for most of the reaction, resulting in high regio- and stereoselectivity during product formation.

Spectroscopic and Reactivity Comparisons of a Pair of bTAML Complexes with FeV═O and FeIV═O Units.

In this report we compare the geometric and electronic structures and reactivities of [FeV(O)]- and [FeIV(O)]2- species supported by the same ancillary nonheme biuret tetraamido macrocyclic ligand (bTAML). Resonance Raman studies show that the Fe═O vibration of the [FeIV(O)]2- complex 2 is at 798 cm-1, compared to 862 cm-1 for the corresponding [FeV(O)]- species 3, a 64 cm-1 frequency difference reasonably reproduced by density functional theory calculations. These values are, respectively, the lowest and the highest frequencies observed thus far for nonheme high-valent Fe═O complexes. Extended X-ray absorption fine structure analysis of 3 reveals an Fe═O bond length of 1.59 Å, which is 0.05 Å shorter than that found in complex 2. The redox potentials of 2 and 3 are 0.44 V (measured at pH 12) and 1.19 V (measured at pH 7) versus normal hydrogen electrode, respectively, corresponding to the [FeIV(O)]2-/[FeIII(OH)]2- and [FeV(O)]-/[FeIV(O)]2- couples. Consistent with its higher potential (even after correcting for the pH difference), 3 oxidizes benzyl alcohol at pH 7 with a second-order rate constant that is 2500-fold bigger than that for 2 at pH 12. Furthermore, 2 exhibits a classical kinteic isotope effect (KIE) of 3 in the oxidation of benzyl alcohol to benzaldehyde versus a nonclassical KIE of 12 for 3, emphasizing the reactivity differences between 2 and 3.

Reductive activation of O2 by a bioinspired Fe complex for catalytic epoxidation reactions.

Aerobic epoxidation of olefins catalyzed by iron complexes without the use of a sacrificial coreductant is unknown. We report the reductive activation of O2 by a bioinspired [(bTAML)FeIII(H2O)]- (1) complex to catalyze the epoxidation of alkenes with TONs of up to 80. Spectroscopic and kinetic evidence indicates the involvement of FeV(O) as the active oxidant during the reaction.

Electrochemical Formation of FeV (O) and Mechanism of Its Reaction with Water During O-O Bond Formation.

A detailed electrochemical investigation of a series of iron complexes (biuret-modified tetraamido iron macrocycles FeIII -bTAML), including the first electrochemical generation of FeV (O), and demonstration of their efficacy as homogeneous catalysts for electrochemical water oxidation (WO) in aqueous medium are reported. Spectroelectrochemical and mass spectral studies indicated FeV (O) as the active oxidant, formed due to two redox transitions, which were assigned as FeIV (O)/FeIII (OH2 ) and FeV (O)/FeIV (O). The spectral properties of both of these high-valent iron oxo species perfectly match those of their chemically synthesised versions, which were thoroughly characterised by several spectroscopic techniques. The O-O bond-formation step occurs by nucleophilic attack of H2 O on FeV (O). A kinetic isotope effect of 3.2 indicates an atom-proton transfer (APT) mechanism. The reaction of chemically synthesised FeV (O) in CH3 CN and water was directly probed by electrochemistry and was found to be first-order in water. The pKa value of the buffer base plays a critical role in the rate-determining step by increasing the reaction rate several-fold. The electronic effect on redox potential, WO rates, and onset overpotential was studied by employing a series of iron complexes. The catalytic activity was enhanced by the presence of electron-withdrawing groups on the bTAML framework. Changing the substituents from OMe to NO2 resulted in an eightfold increase in reaction rate, while the overpotential increased threefold.

Electrocatalytic water oxidation by a molecular cobalt complex through a high valent cobalt oxo intermediate.

Biuret-modified tetraamidomacrocyclic cobalt complex [CoIII-bTAML]- is shown to catalyze electrochemical water oxidation at basic pH leading to the formation of O2. Electrochemical and spectroscopic studies indicate a high valent cobalt oxo intermediate isoelectronic to CoV(O) as the active oxidant. The kinetic isotope effect of 8.63 indicates an atom proton transfer mechanism.

Synthesis of 4-piperidone Based Curcuminoids with Anti-inflammatory and Anti-Proliferation Potential in Human Cancer Cell Lines.

A series of 4-piperidone based curcuminoids were synthesized and anticancer potential of these compounds was evaluated against human myeloid leukemia (KBM5) and colon cancer (HCT116) cell lines. Their anti-inflammatory potential was determined through the down-regulation of tumor necrosis factor (TNF)-α-induced nuclear factor (NF)-κB. All compounds, except one, were found to exhibit better cytotoxicity than curcumin at 5 µM. Furthermore, many compounds have shown good potential to inhibit the TNF-α-induced NF-κB activation. Docking study of the compounds with NF-κB revealed that the binding affinity of the compounds ranged from ‒9.0 to ‒6.5 kcal/mol with 0-8 H-bonds. It was also observed that amido-ether based mono-carbonyl compounds bound around the same region of NF-κB where polynucleotides are known to bind to exhibit their activity.

Mechanism of Oxygen Atom Transfer from Fe(V)(O) to Olefins at Room Temperature.

In biological oxidations, the intermediate Fe(V)(O)(OH) has been proposed to be the active species for catalyzing the epoxidation of alkenes by nonheme iron complexes. However, no study has been reported yet that elucidates the mechanism of direct O-atom transfer during the reaction of Fe(V)(O) with alkenes to form the corresponding epoxide. For the first time, we study the mechanism of O-atom transfer to alkenes using the Fe(V)(O) complex of biuret-modified Fe-TAML at room temperature. The second-order rate constant (k2) for the reaction of different alkenes with Fe(V)(O) was determined under single-turnover conditions. An 8000-fold rate difference was found between electron-rich (4-methoxystyrene; k2 = 216 M(-1) s(-1)) and electron-deficient (methyl trans-cinnamate; k2 = 0.03 M(-1) s(-1)) substrates. This rate difference indicates the electrophilic character of Fe(V)(O). The use of cis-stilbene as a mechanistic probe leads to the formation of both cis- and trans-stilbene epoxides (73:27). This suggests the formation of a radical intermediate, which would allow C-C bond rotation to yield both stereoisomers of stilbene-epoxide. Additionally, a Hammett ρ value of -0.56 was obtained for the para-substituted styrene derivatives. Detailed DFT calculations show that the reaction proceeds via a two-step process through a doublet spin surface. Finally, using biuret-modified Fe-TAML as the catalyst and NaOCl as the oxidant under catalytic conditions epoxide was formed with modest yields and turnover numbers.

Tuning the reactivity of Fe(V)(O) toward C-H bonds at room temperature: effect of water.

The presence of an Fe(V)(O) species has been postulated as the active intermediate for the oxidation of both C-H and C═C bonds in the Rieske dioxygenase family of enzymes. Understanding the reactivity of these high valent iron-oxo intermediates, especially in an aqueous medium, would provide a better understanding of these enzymatic reaction mechanisms. The formation of an Fe(V)(O) complex at room temperature in an aqueous CH3CN mixture that contains up to 90% water using NaOCl as the oxidant is reported here. The stability of Fe(V)(O) decreases with increasing water concentration. We show that the reactivity of Fe(V)(O) toward the oxidation of C-H bonds, such as those in toluene, can be tuned by varying the amount of water in the H2O/CH3CN mixture. Rate acceleration of up to 60 times is observed for the oxidation of toluene upon increasing the water concentration. The role of water in accelerating the rate of the reaction has been studied using kinetic measurements, isotope labeling experiments, and density functional theory (DFT) calculations. A kinetic isotope effect of ∼13 was observed for the oxidation of toluene and d8-toluene showing that C-H abstraction was involved in the rate-determining step. Activation parameters determined for toluene oxidation in H2O/CH3CN mixtures on the basis of Eyring plots for the rate constants show a gain in enthalpy with a concomitant loss in entropy. This points to the formation of a more-ordered transition state involving water molecules. To further understand the role of water, we performed a careful DFT study, concentrating mostly on the rate-determining hydrogen abstraction step. The DFT-optimized structure of the starting Fe(V)(O) and the transition state indicates that the rate enhancement is due to the transition state's favored stabilization over the reactant due to enhanced hydrogen bonding with water.

Homogeneous photochemical water oxidation by biuret-modified Fe-TAML: evidence of Fe(V)(O) intermediate.

Water splitting, leading to hydrogen and oxygen in a process that mimics natural photosynthesis, is extremely important for devising a sustainable solar energy conversion system. Development of earth-abundant, transition metal-based catalysts that mimic the oxygen-evolving complex of photosystem II, which is involved in oxidation of water to O2 during natural photosynthesis, represents a major challenge. Further, understanding the exact mechanism, including elucidation of the role of active metal-oxo intermediates during water oxidation (WO), is critical to the development of more efficient catalysts. Herein, we report Fe(III) complexes of biuret-modified tetra-amidomacrocyclic ligands (Fe-TAML; 1a and 1b) that catalyze fast, homogeneous, photochemical WO to give O2, with moderate efficiency (maximum TON = 220, TOF = 0.76 s(-1)). Previous studies on photochemical WO using iron complexes resulted in demetalation of the iron complexes with concomitant formation of iron oxide nanoparticles (NPs) that were responsible for WO. Herein, we show for the first time that a high valent Fe(V)(O) intermediate species is photochemically generated as the active intermediate for the oxidation of water to O2. To the best of our knowledge, this represents the first example of a molecular iron complex catalyzing photochemical WO through a Fe(V)(O) intermediate.

High density, multi-range analog output Versa Module Europa board for control system applications.

A new VMEDAC64, 12-bit 64 channel digital-to-analog converter, a Versa Module Europa (VME) module, features 64 analog voltage outputs with user selectable multiple ranges, has been developed for control system applications at Inter University Accelerator Centre. The FPGA (Field Programmable Gate Array) is the module's core, i.e., it implements the DAC control logic and complexity of VMEbus slave interface logic. The VMEbus slave interface and DAC control logic are completely designed and implemented on a single FPGA chip to achieve high density of 64 channels in a single width VME module and will reduce the module count in the control system applications, and hence will reduce the power consumption and cost of overall system. One of our early design goals was to develop the VME interface such that it can be easily integrated with the peripheral devices and satisfy the timing specifications of VME standard. The modular design of this module reduces the amount of time required to develop other custom modules for control system. The VME slave interface is written as a single component inside FPGA which will be used as a basic building block for any VMEbus interface project. The module offers multiple output voltage ranges depending upon the requirement. The output voltage range can be reduced or expanded by writing range selection bits in the control register. The module has programmable refresh rate and by default hold capacitors in the sample and hold circuit for each channel are charged periodically every 7.040 ms (i.e., update frequency 284 Hz). Each channel has software controlled output switch which disconnects analog output from the field. The modularity in the firmware design on FPGA makes the debugging very easy. On-board DC/DC converters are incorporated for isolated power supply for the analog section of the board.

Formation of a room temperature stable Fe(V)(O) complex: reactivity toward unactivated C-H bonds.

An Fe(V)(O) complex has been synthesized from equimolar solutions of (Et4N)2[Fe(III)(Cl)(biuret-amide)] and mCPBA in CH3CN at room temperature. The Fe(V)(O) complex has been characterized by UV-vis, EPR, Mössbauer, and HRMS and shown to be capable of oxidizing a series of alkanes having C-H bond dissociation energies ranging from 99.3 kcal mol(-1) (cyclohexane) to 84.5 kcal mol(-1) (cumene). Linearity in the Bell-Evans-Polayni graph and the finding of a large kinetic isotope effect suggest that hydrogen abstraction is engaged the rate-determining step.