Solid waste collagen-associated fabrication of magnetic hematite nanoparticle@collagen nanobiocomposite for emission-adsorption of dyes.

The strategic utilization of hazardous particulate waste in eliminating environmental pollution is an important research hotspot. Herein, abundantly available hazardous solid collagenic waste of leather industry is converted into stable hybrid nanobiocomposite (HNP@SWDC) comprising magnetic hematite nanoparticles (HNP) and solid waste derived collagen (SWDC) via co-precipitation method. The structural, spectroscopic, surface, thermal, and magnetic properties; fluorescence quenching; dye selectivity; and adsorption are explored via microstructural analyzes of HNP@SWDC and dye adsorbed-HNP@SWDC using 1H nuclear magnetic resonance, Raman, ultraviolet-visible, Fourier-transform infrared (FTIR), X-ray photoelectron, and fluorescence spectroscopies; thermogravimetry; field-emission scanning electron microscopy; and vibrating-sample magnetometry (VSM). The intimate interaction of SWDC with HNP and elevated magnetic properties of HNP@SWDC are apprehended via amide-imidol tautomerism associated nonconventional hydrogen bondings, disappearance of goethite specific -OH def. in HNP@SWDC, and VSM. The as-fabricated reusable HNP@SWDC is employed for removing methylene blue (MB) and rhodamine B (RhB). Chemisorption of RhB/MB in HNP@SWDC via ionic, electrostatic, and hydrogen bonding interactions alongside dimerization of dyes are realized by ultraviolet-visible, FTIR, and fluorescence studies; pseudosecond order fitting; and activation energies. The adsorption capacity = 46.98-56.14/22.89-27.57 mg g-1 for RhB/MB is noted using 0.01 g HNP@SWDC within 5-20 ppm dyes and 288-318 K.

Nontraditional Redox Active Aliphatic Luminescent Polymer for Ratiometric pH Sensing and Sensing-Removal-Reduction of Cu(II): Strategic Optimization of Composition.

Here, redox active aliphatic luminescent polymers (ALPs) are synthesized via polymerization of N,N-dimethyl-2-propenamide (DMPA) and 2-methyl-2-propenoic acid (MPA). The structures and properties of the optimum ALP3, ALP3-aggregate and Cu(I)-ALP3, ratiometric pH sensing, redox activity, aggregation enhanced emission (AEE), Stokes shift, and oxygen-donor selective coordination-reduction of Cu(II) to Cu(I) are explored via spectroscopic, microscopic, density functional theory-reduced density gradient (DFT-RDG), fluorescence quenching, adsorption isotherm-thermodynamics, and electrochemical methods. The intense blue and green fluorescence of ALP3 emerges at pH = 7.0 and 9.0, respectively, due to alteration of fluorophores from -C(═O)N(CH3 )2 / -C(═O)OH to -C(O- )═N+ (CH3 )2 / -C(═O)O- , inferred from binding energies at 401.32 eV (-C(O- )═N+ (CH3 )2 ) and 533.08 eV (-C(═O)O- ), significant red shifting in absorption and emission spectra, and peak at 2154 cm-1 . The n-π* communications in ALP3-aggregate, hydrogen bondings within 2.34-2.93 Å (intramolecular) in ALP3 and within 1.66-2.89 Å (intermolecular) in ALP3-aggregate, respectively, contribute significantly in fluorescence, confirmed from NMR titration, ratiometric pH sensing, AEE, excitation dependent emission, and Stokes shift and DFT-RDG analyses. For ALP3, Stokes shift, excellent limit of detection, adsorption capacity, and redox potentials are 13561 cm-1 /1.68 eV, 0.137 ppb, 122.93 mg g-1 , and 0.33/-1.04 V at pH 7.0, respectively.

Ratiometric pH Sensing, Photophysics, and Cell Imaging of Nonaromatic Light-Emitting Polymers.

Here, four nontraditional fluorescent polymers (NTFPs) of varying N,N-dimethyl-2-propenamide (DMPA) and butyl prop-2-enoate (BPE) mole ratios, i.e., 2:1 (NTFP1), 4:1 (NTFP2), 8:1 (NTFP3), and 16:1 (NTFP4), are prepared via random polymerization in water. The maximum fluorescence enhancement of NTFP3 makes it suitable for ratiometric pH sensing, Cu(II) sensing, and pH-dependent cell imaging of Madin-Darby canine kidney (MDCK) cells. The oxygen donor functionalities of NTFP3 involved in binding and sensing with Cu(II) ions are studied by absorption, emission, electron paramagnetic resonance, Fourier transform infrared (FTIR), and O1s/Cu2p X-ray photoelectron spectroscopies (XPS). The spectral responses of the ratiometric pH sensor within 1.5-11.5 confirm 22 and 44 nm red shifts in absorption and ratiometric emission, respectively. The striking color changes from blue (436 nm) to green (480 nm) via an increase in pH are thought to be the stabilization of the charged canonical form of tertiary amide, i.e., -C(O-)═N+(CH3)2, realized from the changes in the absorption/fluorescence spectra and XPS/FTIR analyses. The through-space n-π* interactions in the NTFP3 aggregate, N-branching-associated rigidity, and nonconventional intramolecular hydrogen bondings of adjacent NTFP3 moieties in the NTFP3 aggregate contribute to aggregation-enhanced emissions (AEEs). Here, structures of NTFP3, NTFP3 aggregate, and Cu(II)-NTFP3; absorption; n-π* interactions; hydrogen bondings; AEEs; and binding with Cu(II) are ascertained by density functional theory, time-dependent density functional theory, and reduced density gradient calculations. The excellent limits of detection and Stern-Volmer constants of NTFP3 are 2.24 nM/0.14234 ppb and 4.26 × 103 M-1 at pH = 6.5 and 0.95 nM/0.06037 ppb and 4.90 × 103 M-1 at pH = 8.0, respectively. Additionally, the Stokes shift and binding energy of NTFP3 are 13,636 cm-1/1.69 eV and -4.64 eV, respectively. The pH-dependent MDCK cell imaging ability of noncytotoxic NTFP3 is supported via fluorescence imaging and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay.

Synthesis of gum tragacanth-grafted pentapolymer hydrogels for As(III) exclusion: Roles of microwaves, RSM optimization, and DFT studies.

Microwave assisted homogeneous heating, selectivity in radical formation, and the faster polymerization facilitate the synthesis, structures, properties, and the higher branching associated stability of multifunctional multipolymers. Thus, the optimum gum tragacanth (GMTR)-grafted pentapolymer hydrogel/ HG2 was synthesized from three monomers, i.e., cis-butenedioic acid (cBDA), N-hydroxymethylacryalamide (NHMAm), and 2-(methacryloyloxy)ethanol (MAOE), and in situ generated 2-(3-((hydroxymethyl)amino)-3-oxopropoxy)ethyl-2-methylbutanoate (CM1) and 2-hydroxyethyl 3-(N-(hydroxymethyl)-2-methylbutanamido)-2-methylpropanoate (CM2) comonomers through microwave assisted facile polymerization in aqueous medium. Here, twenty-one GMTR-grafted-[cBDA-co-CM1-co-NHMAm-co-CM2-co-MAOE/ HG1] hydrogels were prepared by using variable amounts of synthesis parameters, of which the optimum HG2 was chosen for the scale-up repetitive As(III)-exclusion. RSM was used to measure the optimum power-temperature-time of microwave irradiation. The structures of HG1, HG2, and As(III)-adsorbed HG2/ As(III)-HG2, in situ anchored comonomers, GMTR-grafting, reusability, thermostability, and surface phenomena were comprehended by XPS, NMR, UV-vis, FTIR, TG, XRD, DLS, and SEM analyses; pHPZC; network parameters; and thermodynamic variables. The geometries, electronic structures, and variable coordinations of As(III) with HG2 were investigated through DFT studies of HG2 and As(OH)3-HG2. The highest exclusion efficiency of 25 mg HG2 within 5-100 mg L-1 As(III) and at 298 K was 192.91 mg g-1, which was significantly higher than that of HG1.

One-pot synthesis of sodium alginate-grafted-terpolymer hydrogel for As(III) and V(V) removal: In situ anchored comonomer and DFT studies on structures.

In this work, an optimum sodium alginate (NaAlg)-grafted-[sodium 2-methylenesuccinate-co-sodium 2-((2-(isobutyryloxy)ethoxy)methyl)succinate-co-ethylene glycol methacrylate, i.e., SMS-co-SIBEMS-co-EGMA, i.e., P1], i.e., P2, was selected among twelve hydrogels synthesized by employing variable amounts of synthesis parameters through a facile polymerization of SMS and EGMA monomers. In P1 and P2, SIBEMS third comonomer was strategically anchored in situ. The formation of terpolymer, i.e., P1, rather than generally expected copolymer, i.e., SMS-co-EGMA/ CoP1, was explored via closeness of experimental and simulated excitation energies of P1 and CoP1, measured by using density functional theory (DFT). The grafting of NaAlg into synthetic P1 elevated swelling, crosslink density (CD), network stability, reusability, and adsorption capacity (AC) of semisynthetic hydrogel, i.e., P2. The reusable P2 presenting optimum result among swelling, CD, and mean molar mass was chosen selectively for removals of As(III) and V(V). The structures of P1, P2, and adsorbed P2, i.e., As(III)-P2 and V(V)-P2; NaAlg-grafting; in situ anchored SIBEMS comonomer; reusability; thermostability; and surface properties were explored through XPS-NMR-FTIR-UV-vis, DFT, TG, DLS, XRD, SEM, pHPZC, and network and thermodynamic energies. The ACs of 0.025 g P2 for As(III) and V(V) were 112.24 and 88.89 mg g-1, respectively, at 308 K and within 5-100 mg L-1. The ACs reduced to 67.26, 75.49, 71.42, and 98.25 mg g-1 for As(III) and 40.25, 50.49, 45.37, and 67.88 mg g-1 for V(V) in the presence of Mn(II), Cu(II), Ni(II), and Zn(II), respectively.

Scale-up one-pot synthesis of waste collagen and apple pomace pectin incorporated pentapolymer biocomposites: Roles of waste collagen for elevations of properties and unary/ ternary removals of Ti(IV), As(V), and V(V).

Herein, hazardous solid particulate waste collagenic fibers (SWCFs) of leather industries were incorporated into apple pomace pectin (APPN)-grafted-pentapolymer, i.e., APPN-g-[sodium 2-methylidenebutanedioate(SMBD)-co-N-((3-(isopropylamino)-3-oxopropoxy) methyl) butyramide (CM1)-co-N-(hydroxymethyl)prop-2-enamide (NHMPE)-co-N-(hydroxymethyl)-4-(N-isopropylbutyramido)butanamide (CM2)-co-N-(propan-2-yl)prop-2-enamide NPYPE)/ PENP1], i.e., APPN-g-PENP1/ PENP2, prepared via one-pot facile polymerization of APPN and synthetic monomers, i.e., SMBD, NHMPE, and NPYPE, in aqueous medium, to fabricate an optimum multifunctional hybrid biocomposite adsorbent/ HCOM3. In PENP1, PENP2, and HCOM3, fourth/ CM1 and fifth/ CM2 multifunctional comonomers were anchored in situ. The structures of PENP1, PENP2, HCOM3, CM1, CM2, and metal-ion adsorbed HCOM3; APPN-grafting; SWCF incorporation; and surface properties were analyzed through NMR, XPS, FTIR, XRD, and SEM. The elevated adsorption efficiencies (AEs), reusability, thermostability, swelling, network durability, and crosslink density of HCOM3 were attributed to variable functionalities of SWCF/ APPN, explored by DLS and TGA, swelling, network, and thermodynamic parameters. Compared to SWCF, APPN, PENP1, and PENP2, the elevated AEs and reusability compelled HCOM3 as more suitable for scalable waste management. The maximum AEs, i.e., 171.79, 180.47, and 177.27 mg g-1, for Ti(IV), As(V), and V(V) at pHop = 7.0, 3.0, and 5.0, respectively, within 5-100 mg L-1 and at 298 K for 25 mg HCOM3 deteriorated during ternary adsorption by the antagonistic effects.

Nonconjugated Biocompatible Macromolecular Luminogens for Sensing and Removals of Fe(III) and Cu(II): DFT Studies on Selective Coordination(s) and On-Off Sensing.

This work reports the design and synthesis of two nonaromatic biocompatible macromolecular luminogens, i.e., 2-(dimethylamino)ethyl methacrylate-co-2-(dimethylamino)ethyl 3-(N-(methylol)acrylamido)-2-methylpropanoate-co-N-(methylol)acrylamide/DMAEMA-co-DMAENMAMP-co-NMA (P1) and methacrylic acid-co-3-(N-(methylol)acrylamido)-2-methylpropanoic acid-co-N-(methylol)acrylamide/MEA-co-NMAMPA-co-NMA (P2), prepared through in situ anchored acrylamido-ester/DMAENMAMP and acrylamido-acid/NMAMPA third comonomers, respectively, in a facile polymerization of two non-luminous monomers in water medium to circumvent the drawbacks related to aggregation-caused quenching of aromatic luminogens. The structures of P1/P2, in situ anchored comonomers, fluorophores, N-branching associated n-π* interactions, and hydrogen bonding assisted aggregation-enhanced emissions are comprehended by nuclear magnetic resonance, Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible, thermogravimetric analysis (TGA), dynamic light scattering (DLS), transmission electron microscopy (TEM), fluorescence lifetime, and fluorescence imaging. P1 and P2 are appropriate for sensitive detections/exclusions of Fe(III)/Cu(II) and cell-imaging. The intrinsic fluorescence, on-off sensing, selective coordinations of Fe(III) and Cu(II) with fluorophores, emission quenching mechanisms, and removals of Fe(III) and Cu(II) are investigated by DFT/NTO analyses of P1/P2 and Fe(III)-P1 and Cu(II)-P2 complexes, XPS, and isotherms and kinetics parameters. The excellent biocompatibilities, comparable limit of detections, i.e., 1.70 × 10-7 and 1.59 × 10-7 [m], and higher adsorption capacities, i.e., 77.25 and 154.13 mg g-1 , at low ppm; 303 K; and pH = 7 compel P1/P2 to be acceptable for multipurpose applications.

New property-performance optimization of scalable alginate-g-terpolymer for Ce(IV), Mo(VI), and W(VI) exclusions.

New property-performance optimization approach of purely-aliphatic scalable-and-reusable multifunctional terpolymer hydrogels envisaging the excellent performance potential has been reported. Accordingly, the optimum potassium alginate (KA)-g-[2-hydroxyethylmethacrylate (HEMA)-co-3-(2-(isobutyryloxy)ethoxy)-2-methylpropanoic acid (IBEMPA)-co-methacrylic acid (MAA)/ 1], i.e., 2, among twelve KA-grafted terpolymer hydrogels has been designed and synthesized via OH functionalized OC/ CC coupled in situ protrusion of third monomer, i.e., IBEMPA, and grafting of KA into 1 in polymerization of two monomers employing variable monomer ratio; pH; amounts of KA, crosslinker, and initiators; and temperatures. The structures of 1/ 2, in situ IBEMPA, grafted-KA, thermal stabilities, surface properties, superadsorption mechanism, and reusability have been explored via 1H/ 13C NMR, FTIR, XPS, TGA, XRD, SEM, DLS, network parameters, pHPZC, %graft-ratio, %gel-content, and thermodynamic-parameters. The maximum adsorption capacities of Ce(IV), Mo(VI), and W(VI) are 1575.57, 1581.32, and 1990.11 mg g-1, respectively, within 500-1000 ppm at 308 K for 0.02 g adsorbent.

Synthesis of Biocompatible Aliphatic Terpolymers via In Situ Fluorescent Monomers for Three-in-One Applications: Polymerization of Hydrophobic Monomers in Water.

Biocompatible, nonconventional, multifunctional, purely aliphatic, light-emitting terpolymers, i.e., acrylonitrile-co-3-(N-isopropylacrylamido)propanenitrile-co-N-isopropylacrylamide (AN-co-NIPAMPN-co-NIPA, 1) and acrylonitrile-co-3-(N-hydroxymethylacrylamido)propanenitrile-co-N-hydroxymethylacrylamide (AN-co-NHMAMPN-co-NHMA, 2), were designed and synthesized via N-H-functionalized C-C + N-C-coupled in situ protrusions/grafting of fluorophore monomers, i.e., NIPAMPN and NHMAMPN, by solution polymerization of two highly hydrophobic nonemissive monomers in water. These scalable and reusable 1 and 2 were suitable for high-performance three-in-one applications, such as Fe(III) sensors, imaging of Madin-Darby canine kidney (MDCK) and human lung cancer (A549) cells, and security inks. The structures of 1 and 2, N-C-coupled in situ attachments/grafting of third fluorophore monomers, grafting events, and aggregation-enhanced emissions (AEEs), were analyzed by 1H and 13C NMR spectroscopy, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-vis) spectroscopy, thermogravimetric (TG) analysis, high-resolution transmission electron microscopy (HRTEM), dynamic light scattering (DLS), fluorescence imaging, and fluorescence lifetime. The geometries, electronic structures, and absorption/emission properties of 1 and 2 at optimized compositions were examined by density functional theory (DFT), time-dependent DFT (TDDFT), and natural transition orbital (NTO) analyses. The limits of detection were 3.20 × 10-7 and 1.37 × 10-7 M for 1 and 2, respectively. The excellent biocompatibility of 1 and 2 was confirmed by >95% retention of MDCK and A549 cell morphologies.

Light-Emitting Multifunctional Maleic Acid-co-2-(N-(hydroxymethyl)acrylamido)succinic Acid-co-N-(hydroxymethyl)acrylamide for Fe(III) Sensing, Removal, and Cell Imaging.

The intrinsically fluorescent highly hydrophilic multifunctional aliphatic terpolymer, maleic acid (MA)-co-2-(N-(hydroxymethyl)acrylamido)succinic acid (NHASA)-co-N-(hydroxymethyl)acrylamide (NHMA), that is, 1, was designed and synthesized via C-C/N-C-coupled in situ allocation of a fluorophore monomer, that is, NHASA, composed of amido and carboxylic acid functionalities in the polymerization of two nonemissive MA and NHMA. The scalable and reusable intrinsically fluorescent biocompatible 1 was suitable for sensing and high-performance adsorptive exclusion of Fe(III), along with the imaging of Madin-Darby canine kidney cells. The structure of 1, in situ fluorophore monomer, aggregation-induced enhanced emission, cell-imaging ability, and superadsorption mechanism were studied via microstructural analyses using 1H/13C NMR, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, atomic absorption spectroscopy, ultraviolet-visible spectroscopy, thermogravimetric analysis, dynamic light scattering, high-resolution transmission electron microscopy, solid-state fluorescence, fluorescence lifetime, and fluorescence imaging, along with measuring kinetics, isotherms, and thermodynamic parameters. The location, electronic structures, and geometries of the fluorophore and absorption and emission properties of 1 were investigated using density functional theory and natural transition orbital analyses. The limit of detection and the maximum adsorption capacity were 2.45 × 10-7 M and 542.81 mg g-1, respectively.

Fluorescent Terpolymers Using Two Non-Emissive Monomers for Cr(III) Sensors, Removal, and Bio-Imaging.

The nonconventional purely aliphatic intrinsically fluorescent multifunctional terpolymers, such as 2-acrylamido-2-methylpropane sulfonic acid-co-2-(3-acrylamidopropylamido)-2-methylpropane sulfonic acid-co-acrylamide (AMPS-co-APMPS-co-AM, 1), acrylic acid-co-3-acrylamidopropanoic acid-co-acrylamide (AA-co-APA-co-AM, 2), and methacrylic acid-co-3-acrylamido-2-methyl propanoic acid-co-acrylamide (MAA-co-AMPA-co-AM, 3), were synthesized via N-H functionalized multi-C-C/N-C coupled in situ attachments of fluorophore monomers, that is, APMPS, APA, and AMPA, in solution polymerization of two non-fluorescent monomers. These terpolymers were suitable for selective Cr(III) sensors, high-performance exclusions of Cr(III), and fluorescence imaging of human osteosarcoma cancer cells. The structures of 1, 2, and 3, in situ attachments of fluorescent amino acid monomers, locations of fluorophores, aggregation-induced enhanced emissions, and the superadsorption mechanism were understood via microstructural analyses. The geometries, electronic structures, and the low-lying singlet-singlet absorption and emission of 1, 2, and 3 were explored using density functional theory (DFT), time-dependent DFT, and natural transition orbital analyses. The ionic and variable interactions of 1, 2, and 3 with Cr(III) were envisaged via analyses of adsorbed microstructures, fitting of kinetics data to a pseudo-second-order model, and the measurements of activation energies. For 1/2/3, limit of detection values and adsorption capacities were 1.88 × 10-7/3.75 × 10-7/1.25 × 10-7 M and 1316.35/1431.40/1372.18 mg g-1, respectively, at pHi = 7.0, 303 K, and 1000 ppm. The better overall properties made 3 to be more suitable in sensing and cell imaging.

Intrinsically Fluorescent Biocompatible Terpolymers for Detection and Removal of Bi(III) and Cell Imaging.

Intrinsically fluorescent biocompatible multifunctional multipurpose terpolymers, i.e., methyl methacrylate-co-methyl 3-(N-isopropylacrylamido)-2-methylpropanoate-co-N-isopropylacrylamide (MMA-co-MNIPAMP-co-NIPAm, 1) and methyl methacrylate-co-methyl 3-(N-hydroxymethylacrylamido)-2-methylpropanoate-co-N-hydroxymethylacrylamide (MMA-co-MNHMAMP-co-NHMAm, 2), were synthesized via in situ-attached acrylamido-ester monomers during polymerization of hydrophobic monomers in water medium. These nonconjugated fluorescent terpolymers presenting aggregation-enhanced emissions (AEEs) were suitable for Bi(III) sensors, Bi(III) removal, cell imaging, and security inks. The fluorescence properties, mechanisms of quenching, interactions of Bi(III) with 1 and 2, and Bi(III) adsorption were explored using theoretical analyses of 1, 2, Bi(III)-1, and Bi(III)-2. Considering the overall properties, 1 was more suitable for diverse prospective applications.

Fluorescent Guar Gum-g-Terpolymer via In Situ Acrylamido-Acid Fluorophore-Monomer in Cell Imaging, Pb(II) Sensor, and Security Ink.

The nonconventional purely aliphatic scalable and reusable fluorescent guar gum (GRGM)-grafted-acrylic acid-co-3-(N-isopropylacrylamido)propanoic acid (NIPAPA)-co-N-isopropylacrylamide (GRGM-grafted-1, i.e., 2), was synthesized via grafting of the optimum amount of GRGM and N-H functionalized in situ protrusion of acrylamido-acid fluorophore-monomer, i.e., NIPAPA, in multi C-C/N-C/O-C coupled solution polymerization of two non-emissive monomers in water. The intrinsically fluorescent noncytotoxic 2 envisaged the excellent potentials in sensing and removal of Pb(II), security ink, logic function, and imaging of both cancer and normal cells. The emission intensities of 2 elevated in concentrated solutions and solid state because of concentration-enhanced emission and aggregation-induced enhanced emission (AIEE) characteristics of 2. Additionally, the emission efficiency of 2 elevated considerably with increasing GRGM contents and temperatures. The structure of 2, in situ attached fluorophore-monomer, AIEE, cell-imaging ability, and the superadsorption mechanism were studied employing 1H/13C NMR, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, ultraviolet-visible spectroscopy, atomic absorption spectroscopy, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, dynamic light scattering, high-resolution transmission electron microscopy, fluorescence imaging, and fluorescence lifetime, along with measuring isotherms, kinetics, and thermodynamic parameters. The location, geometries, and electronic-structures of fluorophore, along with absorption and emission properties, of 2 were explored via density functional theory (DFT), time-dependent DFT, and natural transition orbital analyses. In solution, cyan light-emitting 2 envisaged an average 1.22 ns lifetime in CHCl3. The limit of detection and the maximum adsorption capacity were 2.94 × 10-7 M and 1100.25 mg g-1 at pH 7.0, 303 K, and 1000 ppm, respectively.

Multi-C-C/C-N-Coupled Light-Emitting Aliphatic Terpolymers: N-H-Functionalized Fluorophore Monomers and High-Performance Applications.

To circumvent costly fluorescent labeling, five nonconventional, multifunctional, intrinsically fluorescent aliphatic terpolymers (1-5) have been synthesized by C-C/C-N-coupled, solution polymerization of two non-emissive monomers with protrusions of fluorophore monomers generated in situ. These scalable terpolymers were suitable for sensing and high-performance exclusion of CuII , logic function, and bioimaging. The structures of the terpolymers, in situ attachment of fluorescent monomers, aggregation-induced enhanced emission, bioimaging ability, and super adsorption were investigated by 1 H and 13 C NMR, EPR, FTIR, X-ray photoelectron, UV/Vis, and atomic absorption spectroscopy, thermogravimetric analysis, high-resolution transmission electron microscopy, dynamic light scattering, solid-state fluorescence, fluorescence imaging, and fluorescence lifetime measurements, as well as by isotherm, kinetics, and thermodynamic studies. The geometries and electronic structures of the fluorophores and the absorption and emission properties of the terpolymers were examined by DFT, time-dependent DFT, and natural transition orbital analyses. For 1, 2, and 5, the limits of detection were determined to be 1.03×10-7 , 1.65×10-7 , and 1.77×10-7 m, respectively, and the maximum adsorption capacities are 1575.21, 1433.70, and 1472.21 mg g-1 , respectively.

Chitosan-grafted tetrapolymer using two monomers: pH-responsive high-performance removals of Cu(II), Cd(II), Pb(II), dichromate, and biphosphate and analyses of adsorbed microstructures.

For circumventing the cumbersome and expensive multifunctional and multipolymer adsorbents for high-performance removals of hazardous water-contaminant(s), chitosan-g-[2-acrylamido-2-methyl-1-propanoic acid (AMPS)-co-2-(3-acrylamidopropanamido)-2-methylpropane-1-sulfonic acid (APAMPS)-co-2-(N-(3-amino-3-oxopropyl)acrylamido)-2-methylpropane-1-sulfonic acid (NAOPAMPS)-co-acrylamide (AM)] (i.e., chitosan-g-tetrapolymer), a multifunctional scalable and reusable hydrogel, was synthesized by grafting of chitosan and in situ attachments of N-H functionalized NAOPAMPS and APAMPS hydrophilic acrylamido-monomers during free-radical solution-polymerization of the two ex situ added AMPS and AM monomers in water. The response surface methodology was employed to synthesize one hydrogel envisaging the optimum balance between swelling and stability for the superadsorption of Cu(II), Cd(II), Pb(II), Cr2O72-, and HPO42-. The in situ attachments of NAOPAMPS and APAMPS, grafting of chitosan into tetrapolymer, structures and properties, pH-responsive abilities, superadsorption mechanism, and reusability were understood via in depth microstructural analyses of adsorbed and/or unadsorbed chitosan-g-tetrapolymer(s) through 1H/13C NMR, FTIR, XPS, TGA, XRD, DLS, and pHPZC. The maximum adsorption capacities of Cd(II), Cu(II), Pb(II), Cr2O72-, and HPO42- were 1374.41, 1521.08, 1554.08, 47.76, and 32.76 mg g-1, respectively.

Fluorescent Terpolymers via In Situ Allocation of Aliphatic Fluorophore Monomers: Fe(III) Sensor, High-Performance Removals, and Bioimaging.

Herein, purely aliphatic intrinsically fluorescent terpolymers, i.e., 1 and 2, are synthesized through one-pot solution polymerization via N-H functionalized and multi C-C/C-N coupled in situ protrusion of fluorescent monomers using two nonemissive monomers. These scalable terpolymers are suitable for highly selective Fe(III) sensing, high-performance exclusion of Fe(III), logic function and the imaging of normal mammalian Madin-Darby canine kidney and human osteosarcoma cancer cell lines. The structures of terpolymers, in situ attachment of fluorescent monomers, clusteroluminescence, adsorption-mechanism, and cell-imaging abilities are understood via unadsorbed and/or adsorbed microstructural analyses using 1 H/13 C NMR, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, UV-vis spectroscopy, atomic absorption spectroscopy, thermogravimetric analysis, high-resolution transmission electron microscopy, dynamic light scattering, fluorescence imaging, and fluorescence lifetime. The geometries, electronic structures, location of fluorophores, and singlet-singlet absorption and emission of terpolymers are examined using density functional theory (DFT) and time-dependent DFT. For the precise identification of fluorophores, transition from occupied natural transition orbitals (NTOs) to unoccupied NTOs is computed. For 1/2, limit of detection (LOD) values and adsorption capacities are 6.0 × 10-7 /8.0 × 10-7 m and 147.82/120.56 mg g-1 at pHi = 7.0 and 303 K, respectively. The overall properties of 1 are more advantageous compared to 2 in sensing, cell imaging, and adsorptive exclusion of Fe(III).

Scalable Synthesis of Collagenic-Waste and Natural Rubber-Based Biocomposite for Removal of Hg(II) and Dyes: Approach for Cost-Friendly Waste Management.

For initiating a prosperous cost-friendly waste management of small-scale industries, cow buffing dust (CBD), one of the abundantly available semisynthetic collagenic solid wastes, has been used as a nonsulfur cross-linker of natural rubber (NR) for fabricating an NRCBD-biocomposite superadsorbent. The as-prepared reusable biocomposite bearing variegated collagenic and noncollagenic N-donors, along with the O-donors, has been reported for ligand-selective preferential superadsorption from waste water. Thus, a CBD and NR-based scalable biocomposite bearing optimum cross-linking, excellent physicochemical properties, and reusability has been developed via systematic optimization of the torque and reaction time for cost-friendly adsorptive exclusion of dyes, such as 2,8-dimethyl-3,7-diamino-phenazine (i.e., safranine, SF) and (7-amino-8-phenoxazin-3-ylidene)-diethylazanium dichlorozinc dichloride (i.e., brilliant cresyl blue), BCB, and Hg(II). The CBD-aided curing of NR has been achieved through the formation of a cross-linked chromane-ring originated via reaction between the methylol-phenol ring of phenol-formaldehyde resin and isoprene unit of NR. The partial disappearance of unsaturation in cured-NRCBD, relative variation of crystallinity, surface properties, elevated thermal stabilities, and ligand-selective superadsorption have been studied by advanced microstructural analyses of unadsorbed and/or adsorbed NRCBD using Fourier transform infrared (FTIR), 13C nuclear magnetic resonance, ultraviolet-visible, and O 1s-/N 1s-/C 1s-/Hg 4f7/2,5/2-X-ray photoelectron spectroscopies, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, field emission scanning electron microscopy, energy-dispersive spectroscopy, and pHPZC. Response surface methodology-based optimization has been employed to attain the optimum potential of NRCBD, considering the interactive effects between pHi, temperature, and concentration of the dye. H-aggregate and time-dependent hypochromic effect has been observed during individual adsorption of dyes. Moreover, the prevalence of chemisorption via ionic interaction between NRCBD and SF, BCB, and Hg(II) has been realized by FTIR, fitting of kinetics data to the pseudosecond-order model, and measurement of activation energies. The Brunauer-Emmett-Teller and Langmuir isotherms fit the best to BCB and SF/Hg(II), respectively. Thermodynamically spontaneous chemisorption have shown the maximum adsorption capacities of 303.61, 46.14, and 166.46 mg g-1 for SF, BCB, and Hg(II), respectively, at low initial concentration of Hg(II)/dyes = 40 ppm, 303 K, and adsorbent dose = 0.01 g.

In Situ Attachment of Acrylamido Sulfonic Acid-Based Monomer in Terpolymer Hydrogel Optimized by Response Surface Methodology for Individual and/or Simultaneous Removal(s) of M(III) and Cationic Dyes.

Herein, grafting of starch (STR) and in situ strategic inclusion of 2-(3-(acrylamido)propylamido)-2-methylpropane sulfonic acid (APMPS) via solution polymerization of 2-(acrylamido)-2-methylpropanesulfonic acid (AMPS) and acrylamide (AM) have resulted in the synthesis of smart STR-grafted-AMPS-co-APMPS-co-AM (i.e., STR-g-TerPol) interpenetrating terpolymer (TerPol) network hydrogels. For fabricating the optimum hydrogel showing excellent physicochemical properties and recyclability, amounts of ingredients and temperature of synthesis have been optimized using multistage response surface methodology. STR-g-TerPol bearing the maximum swelling ability, along with the retention of network integrity, has been employed for individual and/or simultaneous removal(s) of metal ions (i.e., M(III)), such as Bi(III) and Sb(III), and dyes, such as tris(4-(dimethylamino)phenyl)methylium chloride (i.e., crystal violet) and (7-amino-8-phenoxazin-3-ylidene)-diethylazanium dichlorozinc dichloride (i.e., brilliant cresyl blue). The in situ strategic protrusion of APMPS, grafting of STR into the TerPol matrix, variation of crystallinity, thermal stabilities, surface properties, mechanical properties, swellability, adsorption capacities (ACs), and ligand-selective superadsorption have been inferred via analyses of unadsorbed and/or adsorbed STR-g-TerPol using Fourier transform infrared (FTIR), 1H/13C NMR, UV-vis, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, field emission scanning electron microscopy, energy-dispersive X-ray, dynamic light scattering, and rheological analyses and measuring the lower critical solution temperature, % gel content, pH at point of zero charge (pHPZC), and network parameters, such as ρc and M c. The prevalence of covalent, ionic (I), and variegated interactions between STR-g-TerPol and M(III) has been understood through FTIR analyses, fitting of kinetics data to the pseudosecond-order model, and by the measurement of activation energies of adsorption. The formation of H-aggregate type dimers and hypochromic and hypsochromic shifts has been explained via UV-vis analyses during individual and/or simultaneous removal(s) of cationic dyes. Several isotherm models were fitted to the equilibrium experimental data, of which Langmuir and combined Langmuir-Freundlich models have been best fitted for individual Bi(III)/Sb(III) and simultaneous Sb(III) + Bi(III) removals, respectively. Thermodynamically spontaneous chemisorption processes have shown the maximum ACs of 1047.39/282.39 and 932.08/137.85 mg g-1 for Bi(III) and Sb(III), respectively, at 303 K, adsorbent dose = 0.01 g, and initial concentration of M(III) = 1000/30 ppm. The maximum ACs have been changed to 173.09 and 136.02 mg g-1 for Bi(III) and Sb(III), respectively, for binary Sb(III) + Bi(III) removals at 303 K, adsorbent dose = 0.01 g, and initial concentration of Bi(III)/Sb(III) at 30/5 and 5/30 ppm.

Structures, Properties, and Performances-Relationships of Polymeric Membranes for Pervaporative Desalination.

For the fulfilment of increasing global demand and associated challenges related to the supply of clean-and-safe water, PV has been considered as one of the most attractive and promising areas in desalinating salty-water of varied salinities. In pervaporative desalination, the sustainability, endurance, and structural features of membrane, along with operating parameters, play the dominant roles and impart paramount impact in governing the overall PV efficiency. Indeed, polymeric- and organic-membranes suffer from several drawbacks, including inferior structural stability and durability, whereas the fabrication of purely inorganic membranes is complicated and costly. Therefore, recent development on the high-performance and cost-friendly PV membrane is mostly concentrated on synthesizing composite- and NCP-membranes possessing the advantages of both organic- and inorganic-membranes. This review reflects the insights into the physicochemical properties and fabrication approaches of different classes of PV membranes, especially composite- and NCP-membranes. The mass transport mechanisms interrelated to the specialized structural features have been discussed. Additionally, the performance potential and application prospects of these membranes in a wide spectrum of desalination and wastewater treatment have been elaborated. Finally, the challenges and future perspectives have been identified in developing and scaling up different high-performance membranes suitable for broader commercial applications.

Starch-g-tetrapolymer hydrogel via in situ attached monomers for removals of Bi(III) and/or Hg(II) and dye(s): RSM-based optimization.

Response surface methodology (i.e., RSM)-optimized starch-g-[2-acrylamido-2-methylpropane sulfonic acid (AMPS)-co-[2-(N-(3-(hydroxymethyl)amino)-3-oxopropyl)acrylamido)-2-methylpropane sulfonic acid] (NHMAOAMPS)-co-[2-(3-(N-(hydroxymethyl)acrylamido)propanamido)-2-methylpropane sulfonic acid (NHMAPMPS)]-co-N-(hydroxymethyl)acrylamide (NHMA)] (i.e., starch-g-tetrapolymer) was synthesized via grafting of starch and in situ strategic protrusion of NHMAOAMPS and NHMAPMPS, using optimum ingredients and temperature. This interpenetrating tetrapolymer-hydrogel bearing extraordinary physicochemical properties and recyclability was applied for unary and/or binary removal(s) of Bi(III)-Hg(II) and brilliant green-crystal violet. The N-H-activated in situ allocation of monomers, grafting of starch, thermal stabilities, surface properties, swellability, sustainability, adsorption capacities, and superadsorption were apprehended via microstructural analyses of unadsorbed and/or adsorbed starch-g-tetrapolymer(s) through FTIR-1H-/13C-NMR-UV-vis, TGA-DSC, XRD, SEM-EDX, DLS, and %gel-content-pHPZC-%graft-ratio. The chemisorption data for metal ions best fitted with Langmuir and combined Langmuir-Freundlich isotherm models for unary and binary adsorption, respectively. The unary/binary adsorption capacities were 1005.41/959.25 and 1087.79/758.56 mg g-1 for Bi(III) and Hg(II), respectively, at 293 K, 0.02 g, and within 500-1000 ppm.