H2O2 pretreated rice seedlings specifically reduces arsenate not arsenite: difference in nutrient uptake and antioxidant defense response in a contrasting pair of rice cultivars.

The study investigated the reduction in metalloid uptake at equimolar concentrations (~53.3 µM) of As(III) and As(V) in contrasting pair of rice seedlings by pretreating with H2O2 (1.0 µM) and SA (1.0 mM). Results obtained from the contrasting pair (arsenic tolerant vs. sensitive) of rice seedlings (cv. Pant Dhan 11 and MTU 7029, respectively) shows that pretreatment of H2O2 and H2O2 + SA reduces As(V) uptake significantly in both the cultivars, while no reduction in the As(III) uptake. The higher growth inhibition, higher H2O2 and TBARS content in sensitive cultivar against As(III) and As(V) treatments along with higher As accumulation (~1.2 mg g(-1) dw) than in cv. P11, unravels the fundamental difference in the response between the sensitive and tolerant cultivar. In the H2O2 pretreated plants, the translocation of As increased in tolerant cultivar against AsIII, whereas, it decreased in sensitive cultivar both against AsIII and AsV. In both the cultivars translocation of Mn increased in the H2O2 pretreated plants against As(III), whereas, the translocation of Cu increased against As(V). In tolerant cultivar the translocation of Fe increased against As(V) with H2O2 pretreatment whereas, it decreased in the sensitive cultivar. In both the cultivars, Zn translocation increased against As(III) and decreased against As(V). The higher level of H2O2 and SOD (EC 1.15.1.1) activity in sensitive cultivar whereas, higher, APX (EC 1.11.1.11), GR (EC 1.6.4.2) and GST (EC 1.6.4.2) activity in tolerant cultivar, also demonstrated the differential anti-oxidative defence responses between the contrasting rice cultivars.

Co-application of selenite and phosphate reduces arsenite uptake in hydroponically grown rice seedlings: toxicity and defence mechanism.

The study empirically evaluates the abatement of As(III) uptake in rice seedlings (7d), in presence of Se and phosphate (P) under hydroponic condition. Positive correlation between As(III) translocation to the shoots of As(III) and P treated seedlings, shows P dependent As(III) translocation in rice. Whereas, presence of both P (5 and 10µgml(-1)) and (0.75µgml(-1)) of Se significantly reduces the As(III) uptake in rice seedlings. Application of Se alone also reduces As(III) uptake both in shoots and roots significantly, however, the seedlings suffers from lipid peroxidation. Among all the studied treatments, lower rates of P (5µgml(-1)) and Se (0.75µgml(-1)) when co-applied, significantly reduced As(III) translocation to the shoots without inflicting much toxicity in the seedlings which is manifested as significant increase in biomass with lower thio-barbituric reactive substances (TBARS). Also, significantly lower TBARS in seedlings receiving As(4)+Se(0.75) and higher TBARS in As(4)+Se(1.5), demonstrates that Se applied at lower rates (0.75µgml(-1)), lowers As induced toxicity. Higher SOD, APX and guaiacol peroxidase (POD) activities in As(4)+P(5)+Se(0.75) compared to that of As(4)+P(5) and As(4)+Se(0.75), supports that lower rate of P and Se provides tolerance towards As induced stress. The nitrogen metabolism in As(4)+P+Se treated seedlings is affected adversely at higher rates of Se and P application. Overall study concluded that application of lower rates of P (5µgml(-1)) and Se (0.75µgml(-1)) provides maximum amelioration of As(III) toxicity in rice seedlings.

Comparison of two ferns (Adiantum capillus-veneris Linn. and Microsorium punctatum (Linn.) Copel) for their Cr accumulation potential and antioxidant responses.

Study was undertaken to compare Cr accumulation in two ferns (Adiantum capillus-veneris Linn. and Microsorium punctatum (Linn.) Copel) and the role of antioxidants were also investigated towards metal tolerance in order to assess the use of ferns in phytomediation/ phytostabilization. Different concentrations (0, 50, 100, 150 microg g(-1) dw) of Cr were added to fern planted in pot containing 1 kg soil. In both the ferns, Cr accumulation increased with increase in metal concentration and maximum accumulation of 800.5 microg g(-1) (fronds) and 1457.4 microg g(-1) (roots) in M. punctatum and 660.8 microg g(-1) (fronds) and 1259.6 microg g(-1) (roots) in A. capillus-veneris was recorded. The increase in the levels of malondialdehyde, antioxidants and antioxidant enzymes (superoxide dismutase, glutathione peroxidase) in A. capillus-veneris was less pronounced than M. punctatum under Cr exposure as compared to their respective controls. In view of less decrease in chlorophyll content and antioxidants along with higher accumulation of Cr in the fronds M. punctatum, is indicative of its higher tolerance towards Cr. However, bioaccumulation factor (concentration of Cr in fronds/concentration of Cr in the soil) of both the ferns was recorded > 1 which qualifies the plants as potential Cr hyperaccumulator and suitable for phytoremediaton.

Modeling and optimization of trihalomethanes formation potential of surface water (a drinking water source) using Box-Behnken design.

PURPOSE: The present research aims to investigate the individual and interactive effects of chlorine dose/dissolved organic carbon ratio, pH, temperature, bromide concentration, and reaction time on trihalomethanes (THMs) formation in surface water (a drinking water source) during disinfection by chlorination in a prototype laboratory-scale simulation and to develop a model for the prediction and optimization of THMs levels in chlorinated water for their effective control. METHODS: A five-factor Box-Behnken experimental design combined with response surface and optimization modeling was used for predicting the THMs levels in chlorinated water. The adequacy of the selected model and statistical significance of the regression coefficients, independent variables, and their interactions were tested by the analysis of variance and t test statistics. RESULTS: The THMs levels predicted by the model were very close to the experimental values (R(2) = 0.95). Optimization modeling predicted maximum (192 µg/l) TMHs formation (highest risk) level in water during chlorination was very close to the experimental value (186.8 ± 1.72 µg/l) determined in laboratory experiments. The pH of water followed by reaction time and temperature were the most significant factors that affect the THMs formation during chlorination. CONCLUSION: The developed model can be used to determine the optimum characteristics of raw water and chlorination conditions for maintaining the THMs levels within the safe limit.

Effect of chromium on accumulation and antioxidants in Cucumis utillissimus L.: response under enhanced bioavailability condition.

This study compares the accumulation of Cr(VI) and biochemical changes (total chlorophyll, carotenoid, protein, malondialdehyde (MDA) and cysteine contents) and roles of antioxidant enzymes (superoxide dismutase (SOD), guaiacol peroxidase (GPX), ascorbate peroxidase (APX)) in tolerance to metal induced stress in Cucumis utillissimus L. grown in Cr contaminated soil (CS) with garden soil (GS). Furthermore, Cr bioavailability was enhanced by ethylene diamine tetra-acetic acid (EDTA) addition to the soil to forecast the plant's accumulation pattern at elevated Cr environment. Accumulation of Cr in the leaves of the plant increased with increase in substrate metals concentration. It further increased with the addition of EDTA by 1437% and 487% in GS and CS, respectively at the highest treatment level. The lipid peroxidation increased proportionately with increase in Cr accumulation in the leaves. All the activity of antioxidant enzymes (SOD, GPX and APX) and the level of cysteine increased with dose dependant manner. SOD and cysteine were observed to be higher in the GS than in CS, but APX and GPX were found to be higher in CS than in GS. The increase in GPX and APX activities with the increase in Cr concentration could be assumed that these two enzymes have a major role in the defense mechanism towards stress induced by Cr in C. utillissimus.

Study on arsenate tolerant and sensitive cultivars of Zea mays L.: differential detoxification mechanism and effect on nutrients status.

The study identifies sensitive and tolerant cultivars of Zea mays L. (cv. Azad kamal (AK) and Azad uttam (AU)) towards As(V) induced stress, based upon growth biochemical parameters and metal(loid) levels in a sand culture. As(V) (µgg⁻¹ dw) accumulation was lower in cv. AK (31 ± 1 and 107 ± 30) than cv. AU (34.5 ± 3.3 and 132.6) in leaves and roots, respectively, which correlated with lower levels of malondialdehyde and H2O2. No definite trend of Mn, Cu, Zn, Fe, Ca, K and Na accumulation signifies that As(V) has little influence on their uptake. Total chlorophyll and protein levels increased in cv. AK and decreased in cv. AU at 7d. Higher levels of SOD and GR in cv. AK and conversely higher levels of APX, GPX and CAT in cv. AU could be a possible differential detoxification mechanism between the cultivars. The results indicate that cv. AK seems to be arsenate tolerant than cv. AU. We assure that the undertaken study does not involve humans or experimental animals and were conducted in accordance with national and institutional guidelines for the protection of human subjects and animal welfare.

Optimizing adsorption of crystal violet dye from water by magnetic nanocomposite using response surface modeling approach.

A magnetic nanocomposite was developed and characterized. Adsorption of crystal violet (CV) dye from water was studied using the nanocomposite. A four-factor central composite design (CCD) combined with response surface modeling (RSM) was employed for maximizing CV removal from aqueous solution by the nanocomposite based on 30 different experimental data obtained in a batch study. Four independent variables, viz. temperature (10-50°C), pH of solution (2-10), dye concentration (240-400 mg/l), and adsorbent dose (1-5 g/l) were transformed to coded values and a second-order quadratic model was built to predict the responses. The significance of independent variables and their interactions were tested by the analysis of variance (ANOVA) and t-test statistics. Adequacy of the model was tested by the correlation between experimental and predicted values of the response and enumeration of prediction errors. Optimization of the process variables for maximum adsorption of CV by nanocomposite was performed using the quadratic model. The Langmuir adsorption capacity of the adsorbent was determined as 81.70 mg/g. The model predicted maximum adsorption of 113.31 mg/g under the optimum conditions of variables (concentration 240 mg/l; temperature 50°C; pH 8.50; dose 1g/l), which was very close to the experimental value (111.80 mg/g) determined in batch experiment.

Metal accumulation, growth, antioxidants and oil yield of Brassica juncea L. exposed to different metals.

In agricultural fields, heavy metal contamination is responsible for limiting the crop productivity and quality. This study reports that the plants of Brassica juncea L. cv. Pusa bold grown on contaminated substrates [Cu, Cr(VI), As(III), As(V)] under simulated field conditions have shown translocation of metals to the upper part and its sequestration in the leaves without significantly affecting on oil yield, except for Cr and higher concentration of As(V), compared to control. Decrease in the oil content in As(V) treated plants was observed in a dose dependent manner; however, maximum decrease was recorded in Cr treated plants. Among all the metal treatments, Cr was the most toxic as evident from the decrease in oil content, growth parameters and antioxidants. The accumulation of metals was below the detection limit in the seeds grown on 10 and 30 mg kg(-1) As(III) and Cr(VI); 10 mg kg(-1) As(V)) and thus can be recommended only for oil cultivation.

Interactive effects of Cr and Fe treatments on plants growth, nutrition and oxidative status in Zea mays L.

The effects of Cr and Fe, singly and in combination were investigated on nutrients uptake (Cu, Zn and Mn), lipid peroxidation, antioxidant enzymes, chlorophyll content and growth parameters in Zea mays L. var. Ruchi (SRHM 445). Roots of the Cr treated plants were stunted and root hair formation was greatly impaired. The leaves were bearing wilted appearance. Cr was primarily accumulated in the roots with a low translocation rate to the leaves. Cu absorption decreased with increase in Cr concentrations only in roots. In leaves there is no correlation. Iron induced lipid peroxidation was higher in the leaves at both the concentrations (3 and 9 microg ml(-1)) after 7d, and decreased significantly by the addition of Cr. Concentrations of most leaves antioxidants were lower in mixed metal treatment compared to single treatments, indicating an interaction between metals leading to reduced cellular effects as indicated by lower lipid peroxidation levels. Changes in APX and GPX activities observed in the leaves of contaminated-plants suggest their involvement in heavy-metal stress tolerance. The plant seems to be tolerant as the translocation of Cr was recorded less, which decreased in the presence of Fe.

Multivariate modeling of chromium-induced oxidative stress and biochemical changes in plants of Pistia stratiotes L.

Biochemical changes in the plants of Pistia stratiotes L., a free floating macrophyte exposed to different concentrations of hexavalent chromium (0, 10, 40, 60, 80 and 160 microM) for 48, 96 and 144 h were studied. Chromium-induced oxidative stress in macrophyte was investigated using the multivariate modeling approaches. Cluster analysis rendered two fairly distinct clusters (roots and shoots) of similar characteristics in terms of their biochemical responses. Discriminant analysis identified ascorbate peroxidase (APX) as discriminating variable between the root and shoot tissues. Principal components analysis results suggested that malondialdehyde (MDA), superoxide dismutase (SOD), APX, non-protein thiols (NP-SH), cysteine, ascorbic acid, and Cr-accumulation are dominant in root tissues, whereas, protein and guaiacol peroxidase (GPX) in shoots of the plant. Discriminant partial least squares analysis results further confirmed that MDA, SOD, NP-SH, cysteine, GPX, APX, ascorbic acid and Cr-accumulation dominated in the root tissues, while protein in the shoot. Three-way analysis helped in visualizing simultaneous influence of metal concentration and exposure duration on biochemical variables in plant tissues. The multivariate approaches, thus, allowed for the interpretation of the induced biochemical changes in the plant tissues exposed to chromium, which otherwise using the conventional approaches is difficult.

Role of antioxidants in Cr tolerance of three crop plants: Metal accumulation in seeds.

Pot experiments were conducted on three crop plants (Vigna radiata cv. PDM54, V. radiata cv. NM1, Brassica juncea cv. vaibhav) which were grown on six different tannery sludge (TS) amendments. The translocation of Cr to the seeds was found to be higher in B. juncea than the two cultivars of V. radiata, and their levels were below detectable limits in all the three plants grown on lower amendments of tannery sludge (T10 and T25). There was a gradual increase in protein content and antioxidant levels in all the plants grown on lower sludge amendments. However, the levels of all the antioxidants were higher in B. juncea than the two cultivars of V. radiata. The increase in malondialdehyde content of B. juncea was lower than the two cultivars of V. radiata as compared to their respective controls. Overall, the plants of B. juncea have shown better tolerance than both the cultivars of V. radiata.

Growth and metal accumulation response of Vigna radiata L. var PDM 54 (mung bean) grown on fly ash-amended soil: effect on dietary intake.

Plants of Vigna radiata L. var. PDM 54 (mung bean) were grown in soil amended with different amounts (10 and 25%) of fly ash (FA). Although total metal content increased with increasing FA amendment, DTPA-extractable metals were higher for 10% FA. Accumulation of metals by the plants increased with increasing FA amendment and was greater in shoots than in roots (except for Mn and Cu) and seeds (except Mn). The total daily intake (TDI) of all the tested metals in seeds was within the recommended dietary allowance (RDA)/provisional tolerable daily intake (PTDI) for adults, except for Cd, which was higher than recommended values. Principal-components analysis (PCA) based on studies of physicochemical properties, DTPA-extractable metals, and metal accumulation in the different parts of V. radiata showed that physicochemical properties such as cation-exchange capacity, organic carbon, and organic matter had significant positive effects on accumulation of Cd, Co, Ni, and Pb by the plant, whereas EC had a significant negative effect. Although addition of fly ash (10%) initially increased the rate of growth, toxic symptoms were observed for 25% FA. Results from analysis of antioxidants (carotenoids, ascorbic acid, non-protein thiol, and free proline) revealed that these increased more in plants grown in 10% FA than in those grown in garden soil. Cysteine and malondialdehyde (MDA) content increased with increasing FA amendment. PCA also showed that all the antioxidants studied behaved similarly except cysteine, for which there was a close relationship with MDA content. Thus, the results obtained during this study revealed that V. radiata L. var. PDM 54 may be grown in 10% FA and/or contaminated agricultural soil.

Antioxidant response in sesame plants grown on industrially contaminated soil: effect on oil yield and tolerance to lipid peroxidation.

The plants of sesame white (Sesamum indicum L. var. T55) grown on tannery sludge (TS) contaminated soil have shown that Cr level in the seeds was found below detection limits in 10% and 25% TS, however, the levels of Ni, Pb and Cd were found above the recommended limits. In roots, the level of antioxidants increased in the plants grown upto 35% TS at 30d over their respective controls. Total chlorophyll content increased significantly (p<0.5) in the plants (leaves) grown on lower sludge amendments (upto 35% TS at 30d and 25% TS at 60d) over their respective controls. In addition, the oil content increased (35% increase over control) in the plants grown on 35% TS. No significant change was observed in thiobarbituric acid reactive substances (TBARS), a lipid peroxidation index, in the plants (upto 50% TS). The number of trichomes in the leaves of treated plants was found more than control. In lower and upper leaves surfaces, the anterior end of the trichomes was found acute tipped and bent downwards, whereas, the trichome tip was straight and blunt in control. The stomata on upper and lower surfaces of the leaves were found partially or totally closed in the plants grown on 100% TS as compared to control. The toxicity was observed at higher amendments which are evident from the observed morphological changes and decrease in chlorophyll content. This study concludes that it is not advisable to grow the plants on contaminated area, besides its healthy growth.

Iron-induced oxidative stress in a macrophyte: a chemometric approach.

Iron-induced oxidative stress in plants of Bacopa monnieri L., a macrophyte with medicinal value, was investigated using the chemometric approach. Cluster analysis (CA) rendered two distinct clusters of roots and shoots. Discriminant analysis (DA) identified discriminating variables (NP-SH and APX) between the root and shoot tissues. Principal component analysis (PCA) results suggested that protein, superoxide dismutase (SOD), ascorbic acid, proline, and Fe uptake are dominant in root tissues, whereas malondialdehyde (MDA), guaiacol peroxidase (POD), cysteine, and non-protein thiol (NP-SH) in shoot of the stress plant. Discriminant partial-least squares (DPLS) results further confirmed that SOD and ascorbic acid contents dominated in root tissues, while NP-SH, cysteine, POD, ascorbate peroxidase (APX), and MDA in shoot. MDA and NP-SH were identified as most pronounced variables in plant during the highest exposure time. The chemometric approach allowed for the interpretation of the induced biochemical changes in plant tissues exposed to iron.

Liquid-phase adsorption of phenols using activated carbons derived from agricultural waste material.

Physical and chemical properties of activated carbons prepared from coconut shells (SAC and ATSAC) were studied. The adsorption equilibria and kinetics of phenol and 2,4-dichlorophenol from aqueous solutions on such carbons were then examined at three different temperatures (10, 25 and 40 degrees C). Adsorption of both phenol and 2,4-dichlorophenol increased with an increase in temperature. The experimental data were analyzed using the Langmuir and Freundlich isotherm models. Both the isotherm models adequately fit the adsorption data for both the phenols. The carbon developed through the acid treatment of coconut shells (ATSAC) exhibited relatively higher monolayer adsorption capacity for phenol (0.53 mmol g(-1)) and 2,4-dichlorophenol (0.31 mmol g(-1)) as compared to that developed by thermal activation (SAC) with adsorption capacity of 0.36 and 0.20 mmol g(-1), for phenol and 2,4-dichlorophenol, respectively. The equilibrium sorption and kinetics model parameters and thermodynamic functions were estimated and discussed. The thermodynamic parameters (free energy, enthalpy and entropy changes) exhibited the feasibility and spontaneous nature of the adsorption process. The sorption kinetics was studied using the pseudo-first-order and second-order kinetics models. The adsorption kinetics data for both the phenol and 2,4-dichlorophenol fitted better to the second-order model. An attempt was also made to identify the rate-limiting step involved in the adsorption process. Results of mass transfer analysis suggested the endothermic nature of the reaction and change in the mechanism with time and initial concentration of the adsorbate. The results of the study show that the activated carbons derived from coconut shells can be used as potential adsorbent for phenols in water/wastewater.

Comparative growth response of two varieties of Vigna radiata L. (var. PDM 54 and var. NM 1) grown on different tannery sludge applications: effects of treated wastewater and ground water used for irrigation.

This study evaluates the possibility of using contaminated soil by treated tannery wastewater and the use of tannery sludge in agriculture. The plants of Vigna radiata var. PDM 54 grown on contaminated soil and irrigated with ground water have not shown the translocation of toxic metal (Cr) in the upper part. The biomass of the plant increased when irrigated with treated tannery wastewater compared to ground water, whereas no significant change was observed in chlorophyll and protein contents. In both the varieties (var. PDM 54 and var. NM 1) of V. radiata grown on tannery sludge amendments, the growth parameters exhibited a pronounced positive growth response up to 35% tannery sludge amendments compared with the plants grown on garden soil. Despite the Cr accumulation at lower amendments, no toxicity symptoms were observed in both the varieties of the plants. Higher amendments affected various growth parameters, NR activity, and carbohydrate content of the plants. The results suggest that the plants of V. radiata (var. PDM 54) may be grown on contaminated soil or lower sludge amendments and irrigated with ground water. No translocation of toxic metal Cr was found in the seeds of the plants grown in up to 25% tannery sludge. However, periodical monitoring is required before the consumption of seeds. Overall, the results showed that plant growth patterns were influenced to some extent by the level of soil contamination and the water used for irrigation.

Decontamination and/or revegetation of fly ash dykes through naturally growing plants.

Present study is focused on the decontamination and/or revegetation of fly ash dykes through naturally growing plants, namely Calotropis procera, Cassia tora, Chenopodium album, Sida cardifolia, Blumea lacera. The results of sequential extraction study showed that maximum amount of metals (Na, K, Fe, Mn, Cr, Pb, Ni, Cd) were associated with residual and Fe-Mn fractions. Diethylenetriamine penta acetic acid (DTPA)-triethanolamine (TEA) extraction assessed the bioavailability of the metals. The total metal accumulation in tested plants was found in the order; C. album>S. cardifolia>C. tora>C. procera>B. lacera. The maximum bioconcentration factor (BCF) was recorded in S. cardifolia for the metals (Na, Fe, Zn, Cd), in C. procera for the metals (Mn, Cu, Ni, Cr) and in C. album for the metals (Co, Pb). However, the translocation factor (TF) of most of the metals was found more in S. cardifolia followed by C. album than other plants. Among all the plants, C. album have shown high BCF and low TF values for toxic metals (Pb, Cd) and suitable for phytostabilization of these metals. Principal component analysis was used to predict translocation behavior of the metals in different parts of the plants which was found similar for the metals (Cu, Zn, Mn, Cr). All examined plants are suitable for revegetation (naturally grows on fly ash dykes) and S. cardifolia and C. album may be used for decontamination purposes.

Receptor modeling for source apportionment of polycyclic aromatic hydrocarbons in urban atmosphere.

This study reports source apportionment of polycyclic aromatic hydrocarbons (PAHs) in particulate depositions on vegetation foliages near highway in the urban environment of Lucknow city (India) using the principal components analysis/absolute principal components scores (PCA/APCS) receptor modeling approach. The multivariate method enables identification of major PAHs sources along with their quantitative contributions with respect to individual PAH. The PCA identified three major sources of PAHs viz. combustion, vehicular emissions, and diesel based activities. The PCA/APCS receptor modeling approach revealed that the combustion sources (natural gas, wood, coal/coke, biomass) contributed 19-97% of various PAHs, vehicular emissions 0-70%, diesel based sources 0-81% and other miscellaneous sources 0-20% of different PAHs. The contributions of major pyrolytic and petrogenic sources to the total PAHs were 56 and 42%, respectively. Further, the combustion related sources contribute major fraction of the carcinogenic PAHs in the study area. High correlation coefficient (R2 > 0.75 for most PAHs) between the measured and predicted concentrations of PAHs suggests for the applicability of the PCA/APCS receptor modeling approach for estimation of source contribution to the PAHs in particulates.

Exploring groundwater hydrochemistry of alluvial aquifers using multi-way modeling.

A three-way data set pertaining to hydrochemistry of the groundwater of north Indo-Gangetic alluvial plains was analyzed using three-way component analysis method with the purpose of extracting the information on spatial and temporal variation trends in groundwater composition. Three-way data modeling was performed using PARAFAC and Tucker3 models. The models were tested for their stability and goodness of optimal fit using core consistency diagnostic and split-half analysis. Although, a two-component PARAFAC model, explaining 50.47% of data variance, yielded 100% core consistency, it failed to qualify the validation test. Tucker3 model (3, 3, 1) captured 55.18% of the data variance and yielded simple diagonal core with three significant elements, explaining 100% of the core variability. Interpretation of the information obtained through Tucker3 model revealed that the groundwater quality in Khar watershed is mainly dominated by water hardness and related variables, whereas, water composition of the dug wells is dominated by alkalinity and carbonate/bicarbonates. Moreover, shallow groundwater sources in the region are contaminated with nitrate derived from fertilizers application in the region. The shallow aquifers are relatively more contaminated during the post-monsoon season.

Assessment of single extraction methods for the prediction of bioavailability of metals to Brassica juncea L. Czern. (var. Vaibhav) grown on tannery waste contaminated soil.

Various single extractant (DTPA, EDTA, NH(4)NO(3), CaCl(2), and NaNO(3)) was used to evaluate the bioavailability of heavy metals from tannery wastewater contaminated soil and translocation of metals to the plant of Brassica juncea L. Czern. (var. Vaibhav). The extraction capacity of the metals was found in the order: EDTA>DTPA>NH(4)NO(3)>CaCl(2)>NaNO(3). Cluster analysis between different extractants showed close relationship between DTPA, CaCl(2), NH(4)NO(3) except EDTA and NaNO(3), which showed dispersed relationship. Principal components analysis (PCA) applied to metals extracted with EDTA showed different grouping of metals (i) Na, Co, Pb, Ni and (ii) K, Mn, Zn, Cr, in the loading plot which showed similar availability from contaminated soil. PCA applied on metals accumulation data in the plants also exhibited different grouping of variables (i) Cu, Co, Ni, Cd and (ii) Mn, Zn, Pb, Fe showed almost similar accumulation pattern in the plants. The data displayed positive loading for Mn and negative loading for Cr with PC(2). Cd and Zn have shown high loadings in PC(1) and PC(2), respectively. The translocation of most of the tested metals (Pb, Mn, Cd, Ni, Fe) in the shoot of the plant was found better except Cr, Cu, Co and K. The correlation analysis between different extractable metals and metal accumulation in the shoot of the plant showed significant positive correlation with Pb and Cr. Overall, extraction capacity and cluster analysis augmented that EDTA was found suitable extractant for tannery wastewater contaminated soil to B. juncea.