Tritiated stainless steel (nano)particle release following a nuclear dismantling incident scenario: Significant exposure of freshwater ecosystem benthic zone.

Nuclear facilities continue to be developed to help meet global energy demands while reducing fossil fuel use. However, an incident during the dismantling of these facilities could accidentally release tritiated particles (e.g. stainless steel) into the environment. Herein, we investigated the environmental dosimetry, fate, and impact of tritiated stainless steel (nano)particles (1 mg.L-1 particles and 1 MBq.L-1 tritium) using indoor freshwater aquatic mesocosms to mimic a pond ecosystem. The tritium (bio)distribution and particle fate and (bio)transformation were monitored in the different environmental compartments over 4 weeks using beta counting and chemical analysis. Impacts on picoplanktonic and picobenthic communities, and the benthic freshwater snail, Anisus vortex, were assessed as indicators of environmental health. Following contamination, some tritium (∼16%) desorbed into the water column while the particles rapidly settled onto the sediment. After 4 weeks, the particles and the majority of the tritium (>80%) had accumulated in the sediment, indicating a high exposure of the benthic ecological niche. Indeed, the benthic grazers presented significant behavioral changes despite low steel uptake (<0.01%). These results provide knowledge on the potential environmental impacts of incidental tritiated (nano)particles, which will allow for improved hazard and risk management.

Bioaccumulation, release and genotoxicity of stainless steel particles in marine bivalve molluscs.

During the decommissioning and removal of radioactive material in nuclear facilities, fine, tritiated dusts of stainless steel, cement or tungsten are generated that could be accidently released to the environment. However, the potential radio- and ecotoxicological effects these tritiated particles may have are unknown. In this study, stainless steel particles (SSPs) representative of those likely to be tritiated are manufactured by hydrogenation and their tissue-specific bioaccumulation, release (depuration) and subsequent genotoxic response have been studied in the marine mussel, Mytilus galloprovincialis, as a baseline for future assessments of the potential effects of tritiated SSPs. Exposure to 1000 µg L-1 of SSPs and adopting Cr as a proxy for stainless steel revealed relatively rapid accumulation (∼5 h) in the various mussel tissues but mostly in the digestive gland. Over longer periods up to 18 days, SSPs were readily rejected and egested as faecal material. DNA strand breaks, as a measure of genotoxicity, were determined at each time point in mussel haemocytes using single cell gel electrophoresis, or the comet assay. Lack of chemical genotoxicity was attributed to the rapid processing of SSP particles and limited dissolution of elemental components of steel. Further work employing tritiated SSPs will enable radio-toxicology to be studied without the confounding effects of chemical toxicity.

Aquatic Mesocosm Strategies for the Environmental Fate and Risk Assessment of Engineered Nanomaterials.

In the past decade, mesocosms have emerged as a useful tool for the environmental study of engineered nanomaterials (ENMs) as they can mimic the relevant exposure scenario of contamination. Herein, we analyzed the scientific outcomes of aquatic mesocosm experiments, with regard to their designs, the ENMs tested, and the end points investigated. Several mesocosm designs were consistently applied in the past decade to virtually mimic various contamination scenarios with regard to ecosystem setting as well as ENMs class, dose, and dosing. Statistical analyses were carried out with the literature data to identify the main parameters driving ENM distribution in the mesocosms and the potential risk posed to benthic and planktonic communities as well as global ecosystem responses. These analyses showed that at the end of the exposure, mesocosm size (water volume), experiment duration, and location indoor/outdoor had major roles in defining the ENMs/metal partitioning. Moreover, a higher exposure of the benthic communities is often observed but did not necessarily translate to a higher risk due to the lower hazard posed by transformed ENMs in the sediments (e.g., aggregated, sulfidized). However, planktonic organisms were generally exposed to lower concentrations of potentially more reactive and toxic ENM species. Hence, mesocosms can be complementary tools to existing standard operational procedures for regulatory purposes and environmental fate and risk assessment of ENMs. To date, the research was markedly unbalanced toward the investigation of metal-based ENMs compared to metalloid- and carbon-based ENMs but also nanoenabled products. Future studies are expected to fill this gap, with special regard to high production volume and potentially hazardous ENMs. Finally, to take full advantage of mesocosms, future studies must be carefully planned to incorporate interdisciplinary approaches and ensure that the large data sets produced are fully exploited.

Release and fate of nanoparticulate TiO2 UV filters from sunscreen: Effects of particle coating and formulation type.

Nanoparticulate mineral UV filters, such as titanium dioxide (TiO2) nanocomposites, are being increasingly used in sunscreens as an alternative to organic UV filters. However, there is still a lack of understanding regarding their fate and behavior in aquatic environments and potential environmental impacts after being released from a bather's skin during recreational activities. In this work, we assessed the release, fate, and transformation of two commercial nanocomposite TiO2 UV filters, one hydrophobic and one hydrophilic, in ultrapure water and simulated fresh- and seawater. The hydrophobic TiO2 nanocomposite, T-SA, was coated with a primary Al2O3 photopassivation layer and a secondary stearic acid layer, while the hydrophilic TiO2 nanocomposite, T-SiO2, was coated with a single SiO2 photopassivation layer. The influence of the sunscreen formulation was examined by dispersing the TiO2 nanocomposites in their typical continuous phase (i.e., oil for T-SA and water for T-SiO2) before introduction into the aqueous system. After 48 h of aqueous aging and 48 h of settling, 88-99% of the hydrophobic T-SA remained floating on top of the water column in all aqueous systems. On the other hand, 100% of the hydrophilic T-SiO2 settled out of the water column in the fresh- and seawaters. With respect to the photopassivation coatings, no loss of the T-SA Al2O3 layer was detected after aqueous aging, but 99-100% dissolution of the SiO2 layer on the T-SiO2 nanocomposite was observed after 48 h in the fresh- and seawaters. This dissolution left behind T-SiO2 by-products exhibiting a photocatalytic activity similar to that of bare rutile TiO2. Overall, the results demonstrated that the TiO2 surface coating and sunscreen formulation type drive environmental behavior and fate and that loss of the passivation layer can result in potentially harmful, photoactive by-products. These insights will help guide regulations and assist manufacturers in developing more environmentally safe sunscreens.

Aqueous aging of a silica coated TiO2 UV filter used in sunscreens: investigations at the molecular scale with dynamic nuclear polarization NMR.

Short-term, aqueous aging of a commercial nanocomposite TiO2 UV filter with a protective SiO2 shell was examined in abiotic simulated fresh- and seawater. Under these conditions, the SiO2 layer was quantitatively removed (∼88-98%) within 96 hours, as determined using inductively coupled plasma-atomic emission spectroscopy (ICP-AES). While these bulk ICP-AES analyses suggested almost identical SiO2 shell degradation after aging in fresh- and seawater, surface sensitive 29Si dynamic nuclear polarization (DNP) solid-state nuclear magnetic resonance (SSNMR), with signal enhancements of 5-10× compared to standard SSNMR, was able to distinguish differences in the aged nanocomposites at the molecular level. DNP-SSNMR revealed that the attachment of the silica layer to the underlying TiO2 core rested on substantial Si-O-Ti bond formation, bonds which were preserved after freshwater aging, yet barely present after aging in seawater. The removal of the protective SiO2 layer is due to ionic strength accelerated dissolution, which could present significant consequences to aqueous environments when the photoactive TiO2 core becomes exposed. This work demonstrates the importance of characterizing aged nanocomposites not only on the bulk scale, but also on the molecular level by employing surface sensitive techniques, such as DNP-NMR. Molecular level details on surface transformation and elemental speciation will be crucial for improving the environmental safety of nanocomposites.

Nanoparticle stability in lake water shaped by natural organic matter properties and presence of particulate matter.

Predicting nanoparticle (NP) fate in the environment continues to remain a challenge, especially for natural surface water systems, where NPs can hetero-aggregate with natural organic and mineral suspended matter. Here we present the interactions and aggregation behavior of TiO2 NPs with natural organic matter (NOM) in a natural lake water. NP fate in a synthetic water of the same pH and ionic composition was also tested in the presence and absence of NOM analogs to gain insight into the different stabilizing effects of each NOM type. Several complementary analytical techniques were utilized to assess lake NOM composition, including pyrolysis-gas chromatography-mass spectrometry, gel permeation chromatography, the polarity rapid-assessment method, and Nanoparticle Tracking Analysis. In the natural lake water, the TiO2 NPs preferentially interacted with mostly anionic NOM of high and medium molecular weight (~1200-1450 and 400-520 Da). Specifically, strong interactions with proteins and polyhydroxy aromatics were observed. NP fate and stability were determined in both raw lake water containing mineral particulate matter and total NOM (NOMtot) and filtered lake water containing only NOM <0.8 µm (NOM<0.8), with different aggregation profiles observed over time. Additionally, three times the number of TiO2 NPs remained in suspension when only NOM<0.8 was present compared to the unfiltered water containing mineral particulate matter and NOMtot. These results demonstrate the contrasting NP fates in the aquatic environment according to the presence of NOMtot vs. NOM<0.8 and further suggest that the use of pure NOM analogs may not accurately represent NP interactions and fate in the natural system.

Dual action antimicrobial surfaces via combined nitric oxide and silver release.

Recent research has demonstrated that silver sulfadiazine and small molecule nitric oxide (NO) donors kill a number of bacterial species synergistically in solution-based assays. Herein, we report on multilayered silica-based xerogels that release both NO and silver. Release of each agent was achieved by exposing amine-modified xerogels to high pressures of NO, and doping silver nitrate (AgNO3) into an alkyl-silane xerogel. Total achievable releases were 3.5 µmol cm(-2) and 1.7 ppm for NO and Ag+, respectively, with release of each agent controlled independent of the other. The NO/Ag+-releasing coating reduced bacterial adhesion and exhibited greater-than-additive killing against both Pseudomonas aeruginosa and Staphylococcus aureus. In contrast, cytotoxicity assays against L929 fibroblasts suggest that the combination does not cause greater-than-additive killing to mammalian cells. Such materials may prove useful in the design of biomedical devices prone to infection such as bone and surgical screws.

Nitric oxide-releasing quaternary ammonium-modified poly(amidoamine) dendrimers as dual action antibacterial agents.

Herein we describe the synthesis of nitric oxide (NO)-releasing quaternary ammonium (QA)-functionalized generation 1 (G1) and generation 4 (G4) poly(amidoamine) (PAMAM) dendrimers. Dendrimers were modified with QA moieties of different alkyl chain lengths (i.e., methyl, butyl, octyl, dodecyl) via a ring-opening reaction. The resultant secondary amines were then modified with N-diazeniumdiolate NO donors to yield NO-releasing QA-modified PAMAM dendrimers capable of spontaneous NO release (payloads of ~0.75 µmol/mg over 4 h). The bactericidal efficacy of individual (i.e., non-NO-releasing) and dual action (i.e., NO-releasing) QA-modified PAMAM dendrimers was evaluated against Gram-positive Staphylococcus aureus and Gram-negative Pseudomonas aeruginosa bacteria. Bactericidal activity was found to be dependent on dendrimer generation, QA alkyl chain length, and bacterial Gram class for both systems. Shorter alkyl chains (i.e., methylQA, butylQA) demonstrated increased bactericidal activity against P. aeruginosa versus S. aureus for both generations, with NO release markedly enhancing overall killing.

Nitric oxide-releasing chitosan oligosaccharides as antibacterial agents.

Secondary amine-functionalized chitosan oligosaccharides of different molecular weights (i.e., ~2500, 5000, 10,000) were synthesized by grafting 2-methyl aziridine from the primary amines on chitosan oligosaccharides, followed by reaction with nitric oxide (NO) gas under basic conditions to yield N-diazeniumdiolate NO donors. The total NO storage, maximum NO flux, and half-life of the resulting NO-releasing chitosan oligosaccharides were controlled by the molar ratio of 2-methyl aziridine to primary amines (e.g., 1:1, 2:1) and the functional group surrounding the N-diazeniumdiolates (e.g., polyethylene glycol (PEG) chains), respectively. The secondary amine-modified chitosan oligosaccharides greatly increased the NO payload over existing biodegradable macromolecular NO donors. In addition, the water-solubility of the chitosan oligosaccharides enabled their penetration across the extracellular polysaccharides matrix of Pseudomonas aeruginosa biofilms and association with embedded bacteria. The effectiveness of these chitosan oligosaccharides at biofilm eradication was shown to depend on both the molecular weight and ionic characteristics. Low molecular weight and cationic chitosan oligosaccharides exhibited rapid association with bacteria throughout the entire biofilm, leading to enhanced biofilm killing. At concentrations resulting in 5-log killing of bacteria in Pseudomonas aeruginosa (P. aeruginosa) biofilms, the NO-releasing and control chitosan oligosaccharides elicited no significant cytotoxicity to mouse fibroblast L929 cells in vitro.

Role of size and shape on biofilm eradication for nitric oxide-releasing silica nanoparticles.

Nitric oxide (NO), a reactive free radical, has proven effective in eradicating bacterial biofilms with reduced risk of fostering antibacterial resistance. Herein, we evaluated the efficacy of NO-releasing silica nanoparticles against Gram-negative Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus biofilms as a function of particle size and shape. Three sizes of NO-releasing silica nanoparticles (i.e., 14, 50, and 150 nm) with identical total NO release (∼0.3 µmol/mg) were utilized to study antibiofilm eradication as a function of size. To observe the role of particle shape on biofilm killing, we varied the aspect ratio of the NO-releasing silica particles from 1 to 8 while maintaining constant particle volume (∼0.02 µm(3)) and NO-release totals (∼0.7 µmol/mg). Nitric oxide-releasing particles with decreased size and increased aspect ratio were more effective against both P. aeruginosa and S. aureus biofilms, with the Gram-negative species exhibiting the greatest susceptibility to NO. To further understand the influence of these nanoparticle properties on NO-mediated antibacterial activity, we visualized intracellular NO concentrations and cell death with confocal microscopy. Smaller NO-releasing particles (14 nm) exhibited better NO delivery and enhanced bacteria killing compared to the larger (50 and 150 nm) particles. Likewise, the rod-like NO-releasing particles proved more effective than spherical particles in delivering NO and inducing greater antibacterial action throughout the biofilm.

Nitric oxide-releasing amphiphilic poly(amidoamine) (PAMAM) dendrimers as antibacterial agents.

A series of amphiphilic nitric oxide (NO)-releasing poly(amidoamine) (PAMAM) dendrimers with different exterior functionalities were synthesized by a ring-opening reaction between primary amines on the dendrimer and propylene oxide (PO), 1,2-epoxy-9-decene (ED), or a ratio of the two, followed by reaction with NO at 10 atm to produce N-diazeniumdiolate-modified scaffolds with a total storage of ~1 µmol/mg. The hydrophobicity of the exterior functionality was tuned by varying the ratio of PO and ED grafted onto the dendrimers. The bactericidal efficacy of these NO-releasing vehicles against established Gram-negative Pseudomonas aeruginosa biofilms was then evaluated as a function of dendrimer exterior hydrophobicity (i.e., ratio of PO/ED), size (i.e., generation), and NO release. Both the size and exterior functionalization of dendrimer proved important to a number of parameters including dendrimer-bacteria association, NO delivery efficiency, bacteria membrane disruption, migration within the biofilm, and toxicity to mammalian cells. Although enhanced bactericidal efficacy was observed for the hydrophobic chains (e.g., ED), toxicity to L929 mouse fibroblast cells was also noted at concentrations necessary to reduce bacterial viability by 5-logs (99.999% killing). The optimal PO to ED ratios for biofilm eradication with minimal toxicity against L929 mouse fibroblast cells were 7:3 and 5:5. The study presented herein demonstrated the importance of both dendrimer size and exterior properties in determining efficacy against established biofilms without compromising biocompatibility to mammalian cells.

Nitric oxide-releasing silica nanoparticle-doped polyurethane electrospun fibers.

Electrospun polyurethane fibers doped with nitric oxide (NO)-releasing silica particles are presented as novel macromolecular scaffolds with prolonged NO-release and high porosity. Fiber diameter (119-614 nm) and mechanical strength (1.7-34.5 MPa of modulus) were varied by altering polyurethane type and concentration, as well as the NO-releasing particle composition, size, and concentration. The resulting NO-releasing electrospun nanofibers exhibited ~83% porosity with flexible plastic or elastomeric behavior. The use of N-diazeniumdiolate- or S-nitrosothiol-modified particles yielded scaffolds exhibiting a wide range of NO release totals and durations (7.5 nmol mg(-1)-0.12 µmol mg(-1) and 7 h to 2 weeks, respectively). The application of NO-releasing porous materials as coatings for subcutaneous implants may improve tissue biocompatibility by mitigating the foreign body response and promoting cell integration.

Shape- and nitric oxide flux-dependent bactericidal activity of nitric oxide-releasing silica nanorods.

Silica nanorods (SNRs) are synthesized and then functionalized with aminoalkoxysilanes to prepare a new class of nitric oxide (NO)-releasing materials. The aspect ratio and size of the SNRs are tuned by varying the temperature, pH, and silane concentration used during the surfactant-templated synthesis. N-Diazeniumdiolate nitric oxide (NO) donors are formed on the secondary amine-functionalized SNRs by reaction with NO gas under basic conditions. Particle surface modifications are employed to manipulate the NO release kinetics. The diverse morphology (i.e., aspect ratio ∼1-8), NO-release kinetics (2000-14,000 ppb NO/mg particle) and similar sizes (i.e., particle volume ∼0.02 µm³) of the resulting NO-releasing SNRs facilitates further studies of how particle shape and NO flux impacts bactericidal activity against Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Pseudomonas aeruginosa (P. aeruginosa) bacteria. The bactericidal efficacies of these materials improves with increasing particle aspect ratio and initial NO flux. Both chemical (i.e., NO-release kinetics) and physical (i.e., morphology) properties greatly influenced the bactericidal activity of these materials.

Nitric oxide-releasing dendrimers as antibacterial agents.

The antibacterial activity of a series of nitric oxide (NO)-releasing poly(propylene imine) (PPI) dendrimers was evaluated against both Gram-positive and Gram-negative pathogenic bacteria, including methicillin-resistant Staphylococcus aureus . A direct comparison of the bactericidal efficacy between NO-releasing and control PPI dendrimers (i.e., non-NO-releasing) revealed both enhanced biocidal action of NO-releasing dendrimers and reduced toxicity against mammalian fibroblast cells. Antibacterial activity for the NO donor-functionalized PPI dendrimers was shown to be a function of both dendrimer size (molecular weight) and exterior functionality. In addition to minimal toxicity against fibroblasts, NO-releasing PPI dendrimers modified with styrene oxide exhibited the greatest biocidal activity (≥99.999% killing) against all bacterial strains tested. The N-diazeniumdiolate NO donor-functionalized PPI dendrimers presented in this study hold promise as effective NO-based therapeutics for combating bacterial infections.

Dual action antimicrobials: nitric oxide release from quaternary ammonium-functionalized silica nanoparticles.

The synthesis of quaternary ammonium (QA)-functionalized silica nanoparticles with and without nitric oxide (NO) release capabilities is described. Glycidyltrialkylammonium chlorides of varied alkyl chain lengths (i.e., methyl, butyl, octyl, and dodecyl) were tethered to the surface of amine-containing silica nanoparticles via a ring-opening reaction. Secondary amines throughout the particle were then functionalized with N-diazeniumdiolate NO donors to yield dual functional nanomaterials with surface QAs and total NO payloads of 0.3 µmol/mg. The bactericidal activities of singly (i.e., only NO-releasing or only QA-functionalized) and dual (i.e., NO-releasing and QA-functionalized) functional nanoparticles were tested against Gram-positive Staphylococcus aureus and Gram-negative Pseudomonas aeruginosa . Particles with only NO release capabilities alone were found to be more effective against P. aeruginosa , while particles with only QA-functionalities exhibited greater toxicity toward S. aureus . The minimum bactericidal concentrations (MBC) of QA-functionalized particles decreased with increasing alkyl chain length against both microbes tested. Combining NO release and QA-functionalities on the same particle resulted in an increase in bactericidal efficacy against S. aureus ; however, no change in activity against P. aeruginosa was observed compared to NO-releasing particles alone.

Silica nanoparticle phytotoxicity to Arabidopsis thaliana.

The phytotoxicity of silica nanoparticles (SiNPs) was evaluated as a function of particle size (14, 50, and 200 nm), concentration (250 and 1000 mg L(-1)), and surface composition toward Arabidopsis thaliana plants grown hydroponically for 3 and 6 weeks. Reduced development and chlorosis were observed for plants exposed to highly negative SiNPs (-20.3 and -31.9 mV for the 50 and 200 nm SiNPs, respectively) regardless of particle concentration when not controlling pH of the hydroponic medium, which resulted in increased alkalinity (~pH 8). Particles were no longer toxic to the plants at either concentration upon calcination or removal of surface silanols from the SiNP surface, or adjusting the pH of the growth medium to pH 5.8. The phytotoxic effects observed for the negatively charged 50 and 200 nm SiNPs were attributed to pH effects and the adsorption of macro- and micro-nutrients to the silica surface. Size-dependent uptake of the nanoparticles by the plants was confirmed using transmission electron microscopy (TEM) and inductively coupled plasma-optical emission spectroscopy (ICP-OES) with plant roots containing 32.0, 1.85, and 7.00 × 10(-3) mg Si·kg tissue(-1)/nm(3) (normalized for SiNP volume) for the 14, 50, and 200 nm SiNPs respectively, after 6 weeks exposure at 1000 ppm (pH 5.8). This study demonstrates that the silica scaffolds are not phytotoxic up to 1000 ppm despite significant uptake of the SiNPs (14, 50, and 200 nm) into the root system of A. thaliana.

The effect of nitric oxide surface flux on the foreign body response to subcutaneous implants.

Although the release of nitric oxide (NO) from biomaterials has been shown to reduce the foreign body response (FBR), the optimal NO release kinetics and doses remain unknown. Herein, polyurethane-coated wire substrates with varying NO release properties were implanted into porcine subcutaneous tissue for 3, 7, 21 and 42 d. Histological analysis revealed that materials with short NO release durations (i.e., 24 h) were insufficient to reduce the collagen capsule thickness at 3 and 6 weeks, whereas implants with longer release durations (i.e., 3 and 14 d) and greater NO payloads significantly reduced the collagen encapsulation at both 3 and 6 weeks. The acute inflammatory response was mitigated most notably by systems with the longest duration and greatest dose of NO release, supporting the notion that these properties are most critical in circumventing the FBR for subcutaneous biomedical applications (e.g., glucose sensors).

Influence of scaffold size on bactericidal activity of nitric oxide-releasing silica nanoparticles.

A reverse microemulsion synthesis was used to prepare amine-functionalized silica nanoparticles of three distinct sizes (i.e., 50, 100, and 200 nm) with similar amine content. The resulting hybrid nanoparticles, consisting of N-(6-aminohexyl)aminopropyltrimethoxysilane and tetraethoxysilane, were highly monodisperse in size. N-Diazeniumdiolate nitric oxide (NO) donors were subsequently formed on secondary amines while controlling reaction conditions to keep the total amount of NO released constant for each particle size. The bactericidal efficacy of the NO-releasing nanoparticles against Pseudomonas aeruginosa increased with decreasing particle size. Additionally, smaller diameter nanoparticles were found to associate with the bacteria at a faster rate and to a greater extent than larger particles. Neither control (non-NO-releasing) nor NO-releasing particles exhibited toxicity toward L929 mouse fibroblasts at concentrations above their respective minimum bactericidal concentrations. This study represents the first investigation of the bactericidal efficacy of NO-releasing silica nanoparticles as a function of particle size.