Ion Beam Nanostructuring of HgCdTe Ternary Compound.

Systematic study of mercury cadmium telluride thin films subjected to the ion beam bombardment was carried out. The evolution of surface morphology of (111) Hg1 - x Cd x Te (x ~ 0.223) epilayers due to 100 keV B+ and Ag+ ion irradiation was studied by AFM and SEM methods. X-ray photoelectron spectroscopy and X-ray diffraction methods were used for the investigation of the chemical compound and structural properties of the surface and subsurface region. It was found that in the range of nanoscale, arrays of holes and mounds on Hg0.777Cd0.223Te (111) surface as well as the polycrystalline Hg1 - x Cd x Te cubic phase with alternative compound (x ~ 0.20) have been fabricated using 100 keV ion beam irradiation of the basic material. Charge transport investigation with non-stationary impedance spectroscopy method has shown that boron-implanted structures are characterized by capacity-type impedance whereas for silver-implanted structures, an inductive-type impedance (or "negative capacitance") is observed. A hybrid system, which integrates the nanostructured ternary compound (HgCdTe) with metal-oxide (Ag2O) inclusions, was fabricated by Ag+ ion bombardment. The sensitivity of such metal-oxide-semiconductor hybrid structure for sub-THz radiation was detected with NEP ~ 4.5 × 10-8 W/Hz1/2at ν ≈ 140 GHz and 296 K without amplification.

Structural and Magnetoresistive Properties of Nanometric Films Based on Iron and Chromium Oxides on the Si Substrate.

Ultraviolet photons of KrF laser (248 nm) was used for the synthesis of nanometric films based on iron and chromium oxides (Fe2O3 - X (0 ≤ x ≤ 1) and Cr3 - X O3 - Y (0 ≤ x ≤ 2; 0 ≤ y ≤ 2)) with variable thickness, stoichiometry, and electrical properties. Film deposition was carried out on the silicon substrate Si < 100 > at the substrate's temperature T S = 293 K. X-ray diffraction and X-ray reflectometry analysis were used for the obtained structure characterization. Such a combined investigation reveals the composition and texture for samples investigated and provides useful information about layer thickness and roughness. Fe2O3 - X (0 ≤ x ≤ 1) nanometric films demonstrate the negative magnetoresistance in magnetic fields up 7 kOe. At the same time, for hybrid systems of the alternate layers Fe2O3 - X (0 ≤ x ≤ 1)/Cr3 - X O3 - Y (0 ≤ x ≤ 2; 0 ≤ y ≤ 2), the positive magnetoresistance as well as the magnetic hysteresis and magnetoresistivity switching effect in the low magnetic fields were observed.

Silicon Substrate Strained and Structured via Cavitation Effect for Photovoltaic and Biomedical Application.

A hybrid structure, which integrates the nanostructured silicon with a bio-active silicate, is fabricated using the method of MHz sonication in the cryogenic environment. Optical, atomic force, and scanning electron microscopy techniques as well as energy dispersive X-ray spectroscopy were used for the investigation of the morphology and chemical compound of the structured surface. Micro-Raman as well as X-ray diffraction, ellipsometry, and photovoltage spectroscopy was used for the obtained structures characterization. Ellipsometer measurements demonstrated the formation of the layer with the thicknesses ~700 nm and optical parameters closed to SiO2 compound with an additional top layer of the thicknesses ~15 nm and the refractive index ~1. Micro-Raman investigation detects an appearance of Ca-O local vibrational mode, and the stretching vibration of SiO4 chains characterized the wollastonite form of CaSiO3. A significant rise in the value and an expansion of the spectral range of the surface photovoltage for silicon structured via the megasonic processing was found. The concept of biocompatible photovoltaic cell on the base of Si\CaSiO3 structure for the application in bioelectronics was proposed.