Crystal Structure and Thermal Properties of Double-Complex Salts [M1(NH3)6][M2(C2O4)3] (M1, M2 = Co, Rh) and K3[Rh(NH3)6][Rh(C2O4)3]2∙6H2O.

Here, seven new double-complex salts, [M1(NH3)6][M2(C2O4)3] (M1, M2 = Co, Rh) and K3[Rh(NH3)6][Rh(C2O4)3]2∙6H2O types, are synthesised. The crystal structure and composition of DCS (double-complex salts) are studied by SCXRD, XRD, CHN and IR methods. The complex salts of the [M1(NH3)6][M2(C2O4)3] (M1, M2 = Co, Rh) type can be crystallised both as a crystalline hydrate [M1(NH3)6][M2(C2O4)3]·3H2O (sp. gr. P-3) and as an anhydrous complex (sp. gr. P-1) depending on the synthesis conditions. The process of [Rh(NH3)6][Rh(C2O4)3] formation is significantly dependent on the synthesis temperature. At room temperature, a mixture is formed comprising [Rh(NH3)6][Rh(C2O4)3] and K3[Rh(NH3)6][Rh(C2O4)3]2∙6H2O, while the [Rh(NH3)6][Rh(C2O4)3] target product crystallises at elevated temperatures. The thermal behaviour of double-complex salts is studied by the STA, EGA-MS, IR and XRD methods. The complete decomposition of complex salts in helium and hydrogen atmospheres resulting in metals or CoxRh1-x solid solutions is achieved at temperatures of 320-450 °C.

Assessment of soil development during rapid urbanization using the carbon and nitrogen stable isotope composition.

The proposed paper is devoted to the analysis of the urbanization effects on soil cover using physico-chemical parameters and stable isotopic signatures on the example of Tyumen. The study methods included analysis of C and N elemental and isotope (δ13C and δ15N) composition, analysis of soil physico-chemical properties and major oxides content. The results of the survey have shown that soil properties within the city limits vary significantly depending on both anthropogenic activities and geomorphological context. The urban soils of Tyumen differ from very strongly acidic with pH values down to 4.8 to strongly alkaline with pH values reaching 8.9, and from sandy loams to silty loams by texture. The study results have shown that δ13C values varied from - 33.86 to - 25.14‰ and δ15N values varied in range, especially, from - 1.66 to 13.38‰. The range of these signatures was smaller than those reported for urbanized areas in Europe and USA. The δ13C values in our case were more related to the geological and landscape parameters of the study area, rather than with urban disturbances and development of urban ecosystems. At the same time, the δ15N values probably indicate zones with increased atmospheric N deposition in the case of Tyumen. The application δ13C and δ15N is a promising tool for analysis of urban soil disturbances and functions, though the regional context should be taken into account.

Comparative analysis of labor input required to produce one carat at different methods of synthesis and mining of diamonds.

Diamond is a form of carbon that has been attracting attention for hundreds of years, owing to its physical and chemical properties of hardness, thermal conductivity, chemical inertness, and transparency. Labor and the long-term impact of a diverse workforce, is one of the most important factors in diamond mining and production and must be considered when assessing economic benefits. In the present study, we examined the labor input required to obtain one carat of diamond, via three methods: open-cast mining, high-pressure high-temperature synthesis and 2.45-GHz microwave plasma chemical vapor deposition. We discovered that to produce a carat of (near-) colorless diamond, the labor inputs are approximately 1.83 h and 3.43 h of work using the HPHT and 2.45-GHz MP CVD methods, respectively. We noted a lower labor input of work per carat for the mining of diamonds of assorted sizes and colors from the two main DeBeers diamond fields in Botswana (Orapa and Jwaneng). This paper is based on our observations and public reports, and we think that our findings will be helpful in understanding the labor input per carat for the analyzed methods, understanding the main technological challenges facing the diamond industry that could potentially affect future labor productivity.

Formation of Catalytically Active Nanoparticles under Thermolysis of Silver Chloroplatinate(II) and Chloroplatinate(IV).

The thermal behaviour of Ag2[PtCl4] and Ag2[PtCl6] complex salts in inert and reducing atmospheres has been studied. The thermolysis of compounds in a helium atmosphere is shown to occur in two stages. At the first stage, the complexes decompose in the temperature range of 350-500 °C with the formation of platinum and silver chloride and the release of chlorine gas. At the second stage, silver chloride is sublimated in the temperature range of 700-900 °C, while metallic platinum remains in the solid phase. In contrast to the thermolysis of Ag2[PtCl6], the thermal decomposition of Ag2[PtCl4] at 350 °C is accompanied by significant heat release, which is associated with disproportionation of the initial salt to Ag2[PtCl6], silver chloride, and platinum metal. It is confirmed by DSC measurements, DFT calculations of a suggested reaction, and XRD. The thermolysis of Ag2[PtCl4] and Ag2[PtCl6] compounds is shown to occur in a hydrogen atmosphere in two poorly separable steps. The compounds are decomposed within 170-350 °C, and silver and platinum are reduced to a metallic state, while a metastable single-phase solid solution of Ag0.67Pt0.33 is formed. The catalytic activity of the resulting nanoalloy Ag0.67Pt0.33 is studied in the reaction of CO total (TOX) and preferential (PROX) oxidation. Ag0.67Pt0.33 enhanced Pt nano-powder activity in CO TOX, but was not selective in CO PROX.

IoTCrawler: Challenges and Solutions for Searching the Internet of Things.

Due to the rapid development of the Internet of Things (IoT) and consequently, the availability of more and more IoT data sources, mechanisms for searching and integrating IoT data sources become essential to leverage all relevant data for improving processes and services. This paper presents the IoT search framework IoTCrawler. The IoTCrawler framework is not only another IoT framework, it is a system of systems which connects existing solutions to offer interoperability and to overcome data fragmentation. In addition to its domain-independent design, IoTCrawler features a layered approach, offering solutions for crawling, indexing and searching IoT data sources, while ensuring privacy and security, adaptivity and reliability. The concept is proven by addressing a list of requirements defined for searching the IoT and an extensive evaluation. In addition, real world use cases showcase the applicability of the framework and provide examples of how it can be instantiated for new scenarios.

Temporal enhancement of 2D color Doppler echocardiography sequences by fragment-based frame reordering and refinement.

PURPOSE: The goal of this study was to develop an algorithm that enhances the temporal resolution of two-dimensional color Doppler echocardiography (2D CDE) by reordering all the acquired frames and filtering out the frames corrupted by out-of-plane motion and arrhythmia. METHODS: The algorithm splits original frame sequence into the fragments based on the correlation with a reference frame. Then, the fragments are aligned temporally and merged into a resulting sequence that has higher temporal resolution. We evaluated the algorithm with 10 animal epicardial 2D CDE datasets of the right ventricle and compared it with the existing approaches in terms of resulting frame rate, image stability and execution time. RESULTS: We identified the optimal combination of alternatives for each step, which resulted in an increase in frame rate from 14 ± 0.87 to 238 ± 93 Hz. The average execution time was 7.23 ± 0.48 s in comparison with 0.009 ± 0.001 s for ECG gating and 1167.37 ± 587.85 s for flow reordering. Our approach demonstrated a significant (p < 0.01) increase in image stability compared with ECG gating and flow reordering. CONCLUSION: This work presents an offline algorithm for temporal enhancement of 2D CDE. Unlike previous frame reordering approaches, it can filter out-of-plane or corrupted frames, increasing the quality of the results, which substantially increases diagnostic value of 2D CDE. It can be used for high-frame-rate intraoperative imaging of intraventricular and valve regurgitant flows and is potentially modifiable for real-time use on ultrasound machines.

Chemolysis of calcium oxalate stones: study in vitro and possible clinical application.

The flow cell modeling clinical conditions have been used to study the interaction between dilute chemolytic solutions and large calcium oxalate renal stones. The stone treatment with 5% disodium ethylenediaminetetraacetate aqueous solutions or citrate buffer are found not to provide notable disruption of the samples studied. The significant improvement is reached with the mixed compositions containing both natural and synthetic chelating reagents:citrate and ethylenediaminetetraacetate ions as well as an antibiotic. Description of the chemolytic irrigation, numerical results and their possible clinical application are the main topic of the present research.