An efficient capture strategy for the purification of human adenovirus type 5 from cell lysates.

An efficient capture step for human adenovirus type 5 from cell lysate was developed as an initial virus purification step from cell debris supernatant. Organosilane-based polymer particles were synthesized and experimental monomer screening allowed the selection of appropriate functionalities for the development of particles for virus binding. After elution, virus recoveries of 83 % were obtained with significant reduction of matrix proteins and residual host cell DNA. Therefore, the implemented capture strategy for adenovirus via polymer particles provides a scalable and reproducible approach to reduce time and cost during virus purification processes.

Plastic Antibodies Mimicking the ACE2 Receptor for Selective Binding of SARS-CoV-2 Spike.

Molecular imprinting has proven to be a versatile and simple strategy to obtain selective materials also termed "plastic antibodies" for a wide variety of species, i.e., from ions to macromolecules and viruses. However, to the best of the authors' knowledge, the development of epitope-imprinted polymers for selective binding of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is not reported to date. An epitope from the SARS-CoV-2 spike protein comprising 17 amino acids is used as a template during the imprinting process. The interactions between the epitope template and organosilane monomers used for the polymer synthesis are predicted via molecular docking simulations. The molecularly imprinted polymer presents a 1.8-fold higher selectivity against the target epitope compared to non-imprinted control polymers. Rebinding studies with pseudoviruses containing SARS-CoV-2 spike protein demonstrate the superior selectivity of the molecularly imprinted matrices, which mimic the interactions of angiotensin-converting enzyme 2 receptors from human cells. The obtained results highlight the potential of SARS-CoV-2 molecularly imprinted polymers for a variety of applications including chem/biosensing and antiviral delivery.

Towards the direct detection of viral materials at the surface of protective face masks via infrared spectroscopy.

The ongoing COVID-19 pandemic represents a considerable risk for the general public and especially for health care workers. To avoid an overloading of the health care system and to control transmission chains, the development of rapid and cost-effective techniques allowing for the reliable diagnosis of individuals with acute respiratory infections are crucial. Uniquely, the present study focuses on the development of a direct face mask sampling approach, as worn (i.e., used) disposable face masks contain exogenous environmental constituents, as well as endogenously exhaled breath aerosols. Optical techniques-and specifically infrared (IR) molecular spectroscopic techniques-are promising tools for direct virus detection at the surface of such masks. In the present study, a rapid and non-destructive approach for monitoring exposure scenarios via medical face masks using attenuated total reflection infrared spectroscopy is presented. Complementarily, IR external reflection spectroscopy was evaluated in comparison for rapid mask analysis. The utility of a face mask-based sampling approach was demonstrated by differentiating water, proteins, and virus-like particles sampled onto the mask. Data analysis using multivariate statistical algorithms enabled unambiguously classifying spectral signatures of individual components and biospecies. This approach has the potential to be extended towards the rapid detection of SARS-CoV-2-as shown herein for the example of virus-like particles which are morphologically equivalent to authentic virus-without any additional sample preparation or elaborate testing equipment at laboratory facilities. Therefore, this strategy may be implemented as a routine large-scale monitoring routine, e.g., at health care institutions, nursing homes, etc. ensuring the health and safety of medical personnel.

Core-Shell Imprinted Particles for Adenovirus Binding.

Virus-imprinted polymers were synthesized via surface imprinting strategies to produce core-shell imprinted particles selective for human adenovirus type 5. High binding affinity of the target virus towards the resulting imprinted layer was confirmed and unspecific binding was reduced in presence of blocking agents, i.e., via bovine serum albumin and skim milk in combination with Tween 20. In addition, the imprinted materials were applied for adenovirus extraction from cell culture supernatants. High levels of virus binding with negligible binding of matrix proteins confirmed the suitability of these materials for binding and extraction of the target virus from complex matrices.

Use of Super-Resolution Optical Microscopy To Reveal Direct Virus Binding at Hybrid Core-Shell Matrixes.

Polymer particles with antibody-like affinity, i.e., molecularly imprinted polymers, offer an ideal platform for biopharmaceutical virus purification. In recent years, attempts combining molecular imprinting technology with a variety of visualization and detection techniques have been reported for directly confirming the localized presence of the template. Direct target visualization is crucial for the characterization of molecularly imprinted polymers, especially if biological templates such as viruses are used. In the present study, for the first time the viral binding behavior at virus-imprinted polymers (VIPs) via stimulated emission depletion (STED) microscopy is shown by imaging individual, fluorescently labeled virus particles. STED microscopy achieves among various other super-resolution techniques the best temporal resolution at high spatial resolution. An innovative virus purification material selective for human adenovirus type 5 (AdV5) offered highly purified virus for the subsequent fluorescent labeling procedure, thus enabling STED imaging. Excellent binding affinities (150-fold higher versus control particles) and high selectivity toward the target virus (AdV5) were observed at those VIPs, even in competitive binding experiments with minute virus of mice using dual-label STED microscopy.

Nanoparticle Tracking of Adenovirus by Light Scattering and Fluorescence Detection.

The detailed characterization of biological nanoparticles is of paramount importance for various industrial sectors, as for production of viral therapeutics. More recently, technologies that allow real-time quantification with simultaneous sizing and determination of surface potentials of virus particles in solution have been developed. In this study, nanoparticle tracking analysis (NTA) was applied to determine the size and the zeta potential of human adenovirus type 5 (AdV5), one the most frequently used therapeutic/oncolytic agents and viral vectors. Virus aggregation was detected, and the kinetics of the dissolution of virus aggregates were studied in real time. In addition, advanced fluorescence detection of AdV5 was performed enabling the measurements in matrices and discrimination of viral subpopulations. It was shown that NTA is an efficient approach for investigating infectious viruses in a live viewing mode. Consequently, NTA provides a promising methodology for virus particle detection and analysis in real time beyond assays requiring nucleic acids or infectivity.

Selective virus capture via hexon imprinting.

An imprinting technique has been developed to generate synthetic polymer beads suitable for selectively binding a supramolecular target. The viral hexon protein, which is the most abundant and accessible surface protein component of the human Adenovirus type 5 (hAdV5) icosahedral capsid, was applied as the template molecule to generate functional polymer beads entailing selectivity for the entire virus. Individual and competitive rebinding studies using two different viruses (i.e. hAdV5 and Minute Virus of Mice - MVM) revealed exquisite selectivity of the imprinted beads for the target hAdV5. Additionally, the morphology of thus imprinted beads was checked via scanning electron microscopy (SEM).

Enhanced Selectivity by Passivation: Molecular Imprints for Viruses with Exceptional Binding Properties.

Inspired by the recognition processes found in biology such as enzyme-substrate and antibody-antigen interactions, synthetic systems with comparable molecular recognition properties have been investigated during recent years based on molecular imprinting strategies. While materials with recognition capabilities for small molecules (i.e., with low molecular weight) have achieved substantial advancements, the synthesis of molecularly imprinted materials with virus recognition properties remains challenging to date. Likewise, protein-surface and protein-protein interactions are essential for a wide variety of biological applications in biotechnology. In biological sensor technology the coating of surfaces to prevent nonspecific adsorption interactions plays an important role. Particularly, polyethylene glycol (PEG) stands out for its high performance in preventing proteins from nonspecifically interactions. However, blocking agents such as the protein bovine serum albumin (BSA) can also be useful as unspecific binding prevention agents for passivation, without modification of the surface. Herein the influence of blocking agents as unspecific reaction components is investigated on the enhancements of selectivity from adenovirus-imprinted particles, whereas adenovirus was used as target species in molecular imprinting. Furthermore, quantitative polymerase chain reaction (qPCR) was used for the first time as virus quantification approach in this context.

Selective binding of matrix metalloproteases MMP-9 and MMP-12 to inhibitor-assisted thermolysin-imprinted beads.

Protein-imprinted polymers have been synthesized to recognize and specifically bind selected proteins. However, protein imprinting requires substantial amounts of pure protein to efficiently obtain imprinted polymers for large scale applications, e.g. protein purification by affinity chromatography. In the absence of large quantities of a pure protein of interest, an alternative strategy was developed. In this case study, neutral metalloprotease thermolysin was selected as a commercially available surrogate for imprinting polymer beads. Phosphoramidon-assisted thermolysin-imprinted beads were synthesized. During rebinding experiments, it was shown that these beads specifically bind to thermolysin. In addition, it was shown that these beads also bind in CHO cell culture supernatant to the matrix metalloprotease-9 and -12 (MMP-9, -12). Therefore, these beads can be applied as a selective sorbent for the rare metalloproteases MMP-9 and MMP-12 to remove these proteases from CHO cell culture supernatants. The high selectivity of thermolysin-imprinted beads can be extended to other proteases of the family of metalloproteases, and is not limited to thermolysin. This innovative approach is suitable to address the challenges in the field of protease purification and isolation from biotechnologically relevant media.

Two N-terminally truncated variants of human ß-galactoside α2,6 sialyltransferase I with distinct properties for in vitro protein glycosylation.

Sialic acid groups of protein N-glycans are important determinants of biological activity. Exposed at the end of the glycan chain, they are potential targets for glycan remodeling. Sialyltransferases (STs; EC 2.4.99) are the enzymes that catalyze the sialic acid transfer from a CMP-activated donor on to a carbohydrate acceptor in vivo. Recombinant expression of the full-length human ß-galactoside α2,6 sialyltransferase I (ST6Gal-I) was hampered and therefore variants with truncated N-termini were investigated. We report on the distinct properties of two N-terminally truncated versions of ST6Gal-I, namely Δ89ST6Gal-I and Δ108ST6Gal-I, which were successfully expressed in human embryonic kidney cells. The different properties of these enzymes result most probably from the loss of interactions from helix α1 in the Δ108ST6Gal-I variant, which plays a role in acceptor substrate binding. The Km for N-acetyl-d-lactosamine was 10-fold increased for Δ108ST6Gal-I (84 mM) as compared to Δ89ST6Gal-I (8.3 mM). The two enzyme variants constitute a suitable tool box for the terminal modification of N-glycans. While the enzyme Δ89ST6Gal-I exhibited both ST (di-sialylation) and sialidase activity on a monoclonal antibody, the enzyme Δ108ST6Gal-I showed only ST activity with specificity for mono-sialylation.

High-quality production of human α-2,6-sialyltransferase in Pichia pastoris requires control over N-terminal truncations by host-inherent protease activities.

BACKGROUND: α-2,6-sialyltransferase catalyzes the terminal step of complex N-glycan biosynthesis on human glycoproteins, attaching sialic acid to outermost galactosyl residues on otherwise fully assembled branched glycans. This "capping" of N-glycans is critical for therapeutic efficacy of pharmaceutical glycoproteins, making the degree of sialylation an important parameter of glycoprotein quality control. Expression of recombinant glycoproteins in mammalian cells usually delivers heterogeneous N-glycans, with a minor degree of sialylation. In-vitro chemo-enzymatic glycoengineering of the N-glycans provides an elegant solution to increase the degree of sialylation for analytical purposes but also possibly for modification of therapeutic proteins. RESULTS: Human α-2,6-sialyltransferase (ST6Gal-I) was secretory expressed in P.pastoris KM71H. ST6Gal-I featuring complete deletion of both the N-terminal cytoplasmic tail and the transmembrane domain, and also partial truncation of the stem region up to residue 108 were expressed N-terminally fused to a His or FLAG-Tag. FLAG-tagged proteins proved much more resistant to proteolysis during production than the corresponding His-tagged proteins. Because volumetric transferase activity measured on small-molecule and native glycoprotein acceptor substrates did not correlate to ST6Gal-I in the supernatant, enzymes were purified and characterized in their action on non-sialylated protein-linked and released N-glycans, and the respective N-terminal sequences were determined by automated Edman degradation. Irrespective of deletion construct used (Δ27, Δ48, Δ62, Δ89), isolated proteins showed N-terminal processing to a highly similar degree, with prominent truncations at residue 108 - 114, whereby only Δ108ST6Gal-I retained activity. FLAG-tagged Δ108ST6Gal-I was therefore produced and obtained with a yield of 4.5 mg protein/L medium. The protein was isolated and shown by MS to be intact. Purified enzyme exhibited useful activity (0.18 U/mg) for sialylation of different substrates. CONCLUSIONS: Functional expression of human ST6Gal-I as secretory protein in P.pastoris necessitates that N-terminal truncations promoted by host-inherent proteases be tightly controlled. N-terminal FLAG-Tag contributes extra stability to the N-terminal region as compared to N-terminal His-Tag. Proteolytic degradation proceeds up to residues 108 - 114 and of the resulting short-form variants, only Δ108ST6Gal-I seems to be active. FLAG-Δ108ST6Gal-I transfers sialic acids to monoclonal antibody substrate with sufficient yields, and because it is stably produced in P.pastoris, it is identified here as an interesting glycoengineering catalyst.

Atomic resolution structure of a lysine-specific endoproteinase from Lysobacter enzymogenes suggests a hydroxyl group bound to the oxyanion hole.

Lysobacter enzymogenes lysyl endoproteinase (LysC) is a trypsin-type serine protease with a high pH optimum that hydrolyses all Lys-Xaa peptide bonds. The high specificity of LysC renders it useful for biotechnological purposes. The K30R variant of a related lysyl endoproteinase from Achromobacter lyticus has favourable enzymatic properties that might be transferrable to LysC. To visualize structural differences in the substrate-binding sites, the crystal structures of wild-type and the K30R variant of LysC were determined. The mutation is located at a distance of 12 Šfrom the catalytic triad and subtly changes the surface properties of the substrate-binding site. The high pH optimum of LysC can be attributed to electrostatic effects of an aromatic Tyr/His stack on the catalytic aspartate and is a general feature of this enzyme subfamily. LysC crystals in complex with the covalent inhibitor N(α)-p-tosyl-lysyl chloromethylketone yielded data to 1.1 and 0.9 Šresolution, resulting in unprecedented precision of the active and substrate-binding sites for this enzyme subfamily. Error estimates on bond lengths and difference electron density indicate that instead of the expected oxyanion a hydroxyl group binds to the partially solvent-exposed oxyanion hole. Protonation of the alkoxide catalytic intermediate might be a recurring feature during serine protease catalysis.

The structure of human α-2,6-sialyltransferase reveals the binding mode of complex glycans.

Human ß-galactoside α-2,6-sialyltransferase I (ST6Gal-I) establishes the final glycosylation pattern of many glycoproteins by transferring a sialyl moiety to a terminal galactose. Complete sialylation of therapeutic immunoglobulins is essential for their anti-inflammatory activity and protein stability, but is difficult to achieve in vitro owing to the limited activity of ST6Gal-I towards some galactose acceptors. No structural information on ST6Gal-I that could help to improve the enzymatic properties of ST6Gal-I for biotechnological purposes is currently available. Here, the crystal structures of human ST6Gal-I in complex with the product cytidine 5'-monophosphate and in complex with cytidine and phosphate are described. These complexes allow the rationalization of the inhibitory activity of cytosine-based nucleotides. ST6Gal-I adopts a variant of the canonical glycosyltransferase A fold and differs from related sialyltransferases by several large insertions and deletions that determine its regiospecificity and substrate specificity. A large glycan from a symmetry mate localizes to the active site of ST6Gal-I in an orientation compatible with catalysis. The glycan binding mode can be generalized to any glycoprotein that is a substrate of ST6Gal-I. Comparison with a bacterial sialyltransferase in complex with a modified sialyl donor lends insight into the Michaelis complex. The results support an SN2 mechanism with inversion of configuration at the sialyl residue and suggest substrate-assisted catalysis with a charge-relay mechanism that bears a conceptual similarity to serine proteases.

Structure of gentlyase, the neutral metalloprotease of Paenibacillus polymyxa.

Gentlyase is a bacterial extracellular metalloprotease that is widely applied in cell culture and for tissue dissociation and that belongs to the family of thermolysin-like proteases. The structure of thermolysin has been known since 1972 and that of Bacillus cereus neutral protease since 1992. However, the structure determination of other Bacillus neutral proteases has been hindered by their tendency to cannibalistic autolysis. High calcium conditions that allow the concentration and crystallization of the active Gentlyase metalloprotease without autoproteolysis were identified using thermal fluorescent shift assays. X-ray structures of the protease were solved in the absence and in the presence of the inhibitor phosphoramidon at 1.59 and 1.76 Šresolution, respectively. No domain movement was observed upon inhibitor binding, although such movement is thought to be a general feature of the thermolysin-like protease family. Further analysis of the structure shows that the observed calcium dependency of Gentlyase stability may arise from a partly degenerated calcium site Ca1-2 and a deletion near site Ca3.