The Influence of an Isocyanate Structure on a Polyurethane Delivery System for 2'-Deoxycytidine-5'-monophosphate.

The delivery of nucleosides represents an interesting research trend in recent years due to their application in various viral infections. The main aims of this study were to develop and to characterize polyurethane particles that are intended to be used for the transport of nucleosides. Three samples have been prepared using aliphatic diisocyanates, a mixture of polyethylene glycol, polycaprolactone, and diols, respectively. The samples were characterized through refractivity measurements, drug loading efficacy, release and penetration rate investigations, FTIR and Raman spectroscopy, thermal analyses, Zetasizer, SEM, HDFa cells viability, and irritation tests on mice skin. The results indicate the obtaining of particles with sizes between 132 and 190 nm, positive Zeta potential values (28.3-31.5 mV), and a refractivity index around 1.60. A good thermal stability was found, and SEM images show a medium tendency to agglomerate. The samples' color, pH, and electrical conductivity have changed only to a small extent over time, and the evaluations indicate an almost 70% encapsulation efficacy, a prolonged release, and that around 70% of particles have penetrated an artificial membrane in the first 24 h. The synthesized products should be tested in further clinical trials, and the current tests on cell cultures and mice skin revealed no side effects.

Design and Assessment of a Polyurethane Carrier Used for the Transmembrane Transfer of Acyclovir.

THE Herpes simplex viruses (HSV-1, HSV-2) are responsible for a wide variety of conditions, from cutaneous-mucosal to central nervous system (CNS) infections and occasional infections of the visceral organs, some of them with a lethal end. Acyclovir is often used intravenously, orally, or locally to treat herpetic infections but it must be administered with caution to patients with kidney disease and to children of early age. The main objectives of this study were to synthesize and evaluate new polyurethane nanoparticles that might be used as proper transmembrane carriers for acyclovir. Polyurethane particles were obtained by a polyaddition process: a mixture of two aliphatic diisocyanates used as organic phase was added to a mixture of butanediol and polyethylene glycol used as aqueous phase. Two different samples (with and without acyclovir, respectively) were synthesized and characterized by UV-Vis spectra in order to assess the encapsulation efficacy and the release profile, FT-IR, DSC, SEM, and SANS for structural characterization, as well as skin irritation tests. Nearly homogeneous samples with particle sizes between 78 and 91 nm have been prepared and characterized revealing a medium tendency to form clusters and a high resistance to heat up to 300 °C. The release profile of these nanoparticles is characteristic to a drug delivery system with a late discharge of the loaded active agents. Very slight increases in the level of transepidermal water loss and erythema were found in a 15-day evaluation on human skin. The results suggest the synthesis of a non-irritative carrier with a high encapsulation efficacy that can be successfully used for the transmembrane transfer of acyclovir.

Pharmaceutical Mixtures: Still A Concern for Human and Environmental Health.

In the present work, recent data on the sources, occurrence and fate of human-use pharmaceutical active compounds (PhACs) in the aquatic environment have been reviewed. Since PhACs and their metabolites are usually present as mixtures in the environment at very low concentrations, a particular emphasis was placed onto the PhACs mixtures, as well as on their short-term and long-term effects against human and environmental health. Moreover, a general overview of the main conventional as well as of the latest trends in wastewaters decontaminant technologies was outlined. Advantages and disadvantages of current processes were also pointed out. It appears that numerous gaps still exist in the current knowledge related to this field of interest, and further studies should be conducted at the global level in order to ensure a more efficient monitorisation of the presence of PhACs and their metabolites into the aquatic environment and to develop new mitigation measures.

Evaluation of phenolic profile, antioxidant and anticancer potential of two main representants of Zingiberaceae family against B164A5 murine melanoma cells.

BACKGROUND: Curcuma longa Linnaeus and Zingiber officinale Roscoe are two main representatives of Zingiberaceae family studied for a wide range of therapeutic properties, including: antioxidant, anti-inflammatory, anti-angiogenic, antibacterial, analgesic, immunomodulatory, proapoptotic, anti-human immunodeficiency virus properties and anticancer effects. This study was aimed to analyse the ethanolic extracts of Curcuma rhizome (Curcuma longa Linnaeus) and Zingiber rhizome (Zingiber officinale Roscoe) in terms of polyphenols, antioxidant activity and anti-melanoma potential employing the B164A5 murine melanoma cell line. RESULTS: In order to evaluate the total content of polyphenols we used Folin-Ciocâlteu method. The antioxidant activity of the two ethanolic extracts was determined by DPPH assay, and for the control of antiproliferative effect it was used MTT proliferation assay, DAPI staining and Annexin-FITC-7AAD double staining test. Results showed increased polyphenols amount and antioxidant activity for Curcuma rhizome ethanolic extract. Moreover, 100 µg/ml of ethanolic plant extract from both vegetal products presented in a different manner an antiproliferative, respectively a proapoptotic effect on the selected cell line. CONCLUSIONS: The study concludes that Curcuma rhizome may be a promising natural source for active compounds against malignant melanoma.

Influence of emulsifiers on the characteristics of polyurethane structures used as drug carrier.

BACKGROUND: Emulsifiers have a significant role in the emulsion polymerization by reducing the interfacial tension thus increasing the stability of colloidal dispersions of polymer nanostructures. This study evaluates the impact of four emulsifiers on the characteristics of polyurethane hollow structures used as drug delivery system. RESULTS: Polyurethane (PU) structures with high stability and sizes ranging from nano- to micro-scale were obtained by interfacial polyaddition combined with spontaneous emulsification. The pH of PU aqueous solutions (0.1% w/w) was slightly acidic, which is acceptable for products intended to be used on human skin. Agglomerated structures with irregular shapes were observed by scanning electron microscopy. The synthesized structures have melting points between 245-265°C and reveal promising results in different evaluations (TEWL, mexametry) on murine skin. CONCLUSIONS: In this study hollow PU structures of reduced noxiousness were synthesized, their size and stability being influenced by emulsifiers. Such structures could be used in the pharmaceutical field as future drug delivery systems.

Synthesis and preliminary in vivo evaluations of polyurethane microstructures for transdermal drug delivery.

BACKGROUND: Polymers have been considered as important materials in fabrication of microstructures for various medical purposes including drug delivery. This study evaluates polyurethane as material for hollow microstructures preparation. RESULTS: Polyurethane microstructures were obtained by interfacial polyaddition combined with spontaneous emulsification and present slightly acid pH values. Scanning electron microscopy revealed the existence of irregular shapes and agglomerated microstructures. The material is heat resistant up to 280°C. Good results were recorded on murine skin tests in case of polyurethane microstructures based on isophorone diisocyanate. Mesenchymal stem cells viability presents good results for the same sample after 48 hours based on the Alamar Blue test. CONCLUSIONS: The research revealed the reduced noxiousness of this type of microstructures and consequently the possibility of their use for therapeutic purposes.

A comparison investigation on the solubilization of betulin and betulinic acid in cyclodextrin derivatives.

Betulin (BET) and betulinic acid (BA) are naturally occurring pentacyclic lupane triterpenes, exhibit great promise as bioactive agents for the treatment of many diseases. The poor solubilities of BET and BA in water have limited their applications. In the present work, BET and BA were selected as guest molecules, three hydrophilic gamma-cyclodextrin (CD) thioethers were synthesized and selected as host molecules. beta-, Hydroxypropyl-beta-CD, (HP-beta-CD), gamma-CD and HP-gamma-CD were also investigated as hosts in order to compare the solubilization abilities of these host molecules. The solubilities of BET and BA were estimated from 1H NMR measurements by comparing the relative integral areas of the proton signals between CDs and guests. gamma-CD thioethers 5-7solubilized BET and BA to much higher extends than other host molecules. The obtained maximal solubilities of BET and BA were 5.2 and 4.5 mM, respectively. The topographies of the inclusion compounds were determined by ROESY NMR spectroscopy.

Physico-chemical comparison of betulinic acid, betulin and birch bark extract and in vitro investigation of their cytotoxic effects towards skin epidermoid carcinoma (A431), breast carcinoma (MCF7) and cervix adenocarcinoma (HeLa) cell lines.

Betulin and betulinic acid are pentacyclic triterpenes present in the bark of the birch tree and other vegetal sources. Quantitatively, in birch bark betulin is more significant than betulinic acid; therefore, birch can be a large and feasible source of raw material for betulin extraction. Betulin can be used as extracted or, after chemical modification, as a starting compound for its acid, betulinic acid, with both substances possessing various interesting pharmacological properties. The purpose of this study is to analyse the betulin and betulinic acid content of a birch tree bark extract, as well as its cytotoxic activity. The extraction was done using a Soxhlet extractor and chloroform/dichlormethane/methanol (1 : 1 : 1) as solvent. The betulin and betulinic acid content of the extract was estimated using standards of pure betulin and betulinic acid, by thermal analysis as opposed to pure substance (thermogravimetric and differential thermal analysis). The extract and the main compounds were also analysed by NMR. The results indicated a high amount of betulin in the final extract (up to 50%), and an important quantity of betulinic acid: over 3%. The cytotoxic activity indicated a high proliferation inhibition for the birch tree extract but was still comparable with betulinic acid and betulin.