Hyphenated techniques in speciation analysis of polyoxometalates: identification of individual [PMo12-xVxO40]-3-x (x = 1-3) in the reaction mixtures by high performance liquid chromatography and atomic emission spectrometry with inductively coupled plasma.

Unambiguous identification of polyoxometalate (POM) species generated in self-assembly reactions in solution is rather problematic due to close similarity of their properties such as solubility and spectral characteristics. The situation is made more complex by protonation equilibria (which can change their analytical signals) and the lack of individual compounds to serve as standards for individual members of these mixtures. In the present work a new approach to the study of such POMs has been suggested, taking molybdovanadates [PMo12-xVxO40]-3-x as a model. The key feature of this approach consists of generation of so-called "conditional model systems" that include most of the expected components of a mixture formed by self-assembly, tracked down by reliable detection techniques, e.g., 51V NMR-spectroscopy in this particular case. Then the proposed composition of the mixture is verified and corrected by means of high-performance liquid chromatography coupled with inductively coupled plasma atomic emission spectrometry (HPLC-ICP-AES).

Trapping molecular bromine: a one-dimensional bromobismuthate complex with Br2 as a linker.

The reaction between solid (NMP)n{[BiBr4]}n (1) (NMP = N-methylpyridinium) and Br2, generated in situ in HBr solution, results in the formation of (NMP)3[Bi2Br9]·Br2 (2). In the structure of 2, dibromine molecules connect discrete binuclear [Bi2Br9](3-) anions into an extended network. Complex 2 is thermally stable (up to 150 °C).

Platinum polyoxoniobates.

Reaction of [Nb6O19](8-) with [Pt(OH)4(H2O)2] upon heating yielded first characterized platinum polyniobates. A dimeric complex [Nb6O19{Pt(OH)2}]2(12-) (1) is produced in a 1 : 1 molar ratio. Increasing the Pt/Nb6 molar ratio to 1 : 2 yields a mixture of 1 and a sandwich-type complex [Pt(Nb6O19)2](12-) (2).

Grafting {Cp*Rh}(2+) on the surface of Nb and Ta Lindqvist-type POM.

New hybrid POM based on Lindqvist-type polyoxometalates [M6O19](8-) (M = Nb, Ta) and organometallic fragment {Cp*Rh}(2+) have been isolated and characterized. X-ray quality crystals of K4[(Cp*Rh)2Nb6O19]·20H2O () and Cs4[(Cp*Rh)2Ta6O19]·18H2O () were obtained from solutions with {Cp*Rh} : [M6O19](8-) stoichiometry 2 : 1. The solution behavior of the hybrid polyoxoanions was studied with ESI-MS and (1)H DOSY NMR. Amongst the poorly investigated chemistry of polyoxotantalates, complex is the first complex bearing a grafted organometallic fragment. The formation of 1 : 1 complexes was detected by ESI-MS techniques.

Coordination-induced condensation of [Ta6O19](8-): synthesis and structure of [{(C6H6)Ru}2Ta6O19](4-) and [{(C6H6)RuTa6O18}2(µ-O)](10-).

Reaction of [(C6H6)RuCl2]2 and Na8[Ta6O19] gives two new hybrid organometallic POM complexes, Na10[{(C6H6)RuTa6O18}2(µ-O)]·39.4H2O (Na10-1) and Na4(trans-[{(C6H6)Ru}2Ta6O19]·20H2O (Na4-2). In both cases the half-sandwich fragments {(C6H6)Ru}(2+) are coordinated as additional vertices to the {Ta3(µ2-O)3} triangles of the hexatantalate. According to NMR and ESI-MS data, the dimeric complex [{(C6H6)RuTa6O18}2(µ-O)](10-) dissociates in water with the formation of monomeric [(C6H6)RuTa6O19](6-) species (1a). X-ray structural characterization and aqueous speciation of the complexes by (13)C, (1)H, and DOSY NMR; ESI-MS; and capillary electrophoresis (CE) have been carried out.

Trapping {BW12}2 tungstoborate: synthesis and crystal structure of hybrid [{(H2BW12O42)2O}{Mo6O6S6(OH)4(H2O)2}]14- anion.

Reaction between monolacunary {BW(11)} tungstoborate and oxothiocationic building block, {Mo(2)O(2)S(2)}, results in the formation of a new polyoxothiometalate with a unique architecture in which two [H(2)BW(12)O(43)](9-) tungstoborate subunits are linked together with a hexamolybdate [Mo(V)(6)O(6)S(6)(OH)(4)(H(2)O)(2)](2+) bridge.

Preparation, structure, and reactivity of Ge-containing heterometallic cube derivatives of [M(3)E(4)(H2O)(9)](4+) (M = Mo, W; E = S, Se).

Studies leading to the incorporation of Group 14 germanium into the incomplete cuboidal clusters [M(3)E(4)(H2O)(9)](4+) (M = Mo, W; E = S, Se) have been carried out. From the clusters [Mo(3)E(4)(H2O)(9)](4+), corner-shared double cubes [Mo(6)GeE(8)(H2O)(18)] are obtained with GeO, by heating with Ge powder at 90 degrees C, or by heating with GeO(2) in the presence of H(3)PO(2) as reductant at 90 degrees C, illustrating the dominance of the double cubes. The yellow-green single cube [Mo(3)GeS(4) (H2O)(12)](6+) is only obtained by controlled air oxidation of [Mo(6)GeS(8)(H2O)(18)](8+) over a period of approximately 4 days followed by Dowex purification. In the case of the trinuclear clusters [W(3)E(4)(H2O)(9)](4+), the single cubes [W(3)GeE(4)(H2O)(12)](6+) are dominant and prepared by the reactions with GeO, or GeO(2)/H(3)PO(2). Conversion of [W(3)GeE(4)(H2O)(12)](6+) to the corresponding double cubes is achieved by reductive addition with BH(4)(-) in the presence of a further equivalent of [W(3)E(4)(H2O)(9)](4+). The crystal structures (pts(-) = p-toluene-sulfonate) of [Mo(6)GeS(8)(H2O)(18)](pts)(8).28H2O, (1); [W(6)GeS(8)(H2O)(18)](pts)(8).23H2O, (2); and [Mo(6)GeSe(8)(H2O)(18)](pts)(8).8H2O, (3); have been determined, of which (2) is the first structure of a W(6) double cube. The M-M bond lengths of approximately 2.7 A are consistent with metal-metal bonding, and the M-Ge of approximately 3.5 A corresponds to nonbonding separations. Of the Group 13-15 corner-shared double cubes from [Mo(3)S(4)(H2O)(9)](4+), [Mo(6)GeS(8)(H2O)(18)](8+) is the least reactive with [Co(dipic)(2)](-) as oxidant (0.077 M(-1) s(-1)), and [Mo(6)SnS(8)(H2O)(18)](8+) is next (14.9 M(-1) s(-1)). Both Ge and Sn (Group 14) have an even number of electrons, resulting in greater stability. In contrast, [W(6)GeS(8)(H2O)(18)](8+) is much more reactive (7.3 x 10(3) M(-1) s(-1)), and also reacts more rapidly with O(2).

Behavioral patterns of heterometallic cuboidal derivatives of [M3Q4(H2O)9]4+ (M = Mo, W; Q = S, Se).

This Account reports recent progress in the study of some approximately 20 heterometal derivatives of [Mo3S4(H2O)9]4+ with reference also to W and Se analogues. Single cubes (3:1) and corner-shared double cubes (6:1), as well as dimers of the 3:1 single cubes, are considered. A classification of the heterometals as subtypes A, B, and C is introduced.

Synthesis, Structure, and Properties of Molybdenum and Tungsten Cyano Complexes with Cuboidal M(4)(&mgr;(3)-E)(4) (M = Mo, W; E = S, Se, Te) Cores.

Four new tungsten and molybdenum cyano complexes of formula KCs(5)[W(4)S(4)(CN)(12)].CH(3)OH.2H(2)O (1), K(6)[W(4)Se(4)(CN)(12)].6H(2)O (2), K(6)[W(4)Te(4)(CN)(12)].5H(2)O (3), and K(7)[Mo(4)Te(4)(CN)(12)].12H(2)O (5) have been prepared by high-temperature 430-450 degrees C reaction of the polymeric chain compounds {W(3)S(7)Br(4)}(x)(), {W(3)Se(7)Br(4)}(x)(), {Mo(3)Te(7)I(4)}(x)() and solid-state WTe(2) with KCN, and crystallization from aqueous solutions. In addition Cs(6)[Mo(4)Te(4)(CN)(12)].2H(2)O (4) has been prepared by oxidation of 5 with bromine water. The molecular structures have been investigated by X-ray crystallography. Mixed-valence (3.5) compounds 1-4 are diamagnetic. Mixed-valence (3.25) compound 5 is paramagnetic (&mgr; = 2.03 &mgr;(B) at 77 K). In addition to the structural data for these complexes IR and UV-vis spectroscopy have been used to characterize the complexes. Cyclic-voltammetry data have shown that M(4)E(4)(n)()(+) (M = Mo, W; E = S, Se, Te) cubes are capable of existing in three oxidation states ranging from the most oxidized (n = 6; 10 electrons) to the most reduced electron-precise (n = 4; 12 electrons). The (77)Se, (125)Te, and (183)W NMR spectra of the cubes (1-3) demonstrate unambiguously the unaltered environments of the W and E atoms in aqueous solution.