Probing gigahertz coherent acoustic phonons in TiO2 mesoporous thin films.

Ultrahigh-frequency acoustic-phonon resonators usually require atomically flat interfaces to avoid phonon scattering and dephasing, leading to expensive fabrication processes, such as molecular beam epitaxy. Mesoporous thin films are based on inexpensive wet chemical fabrication techniques that lead to relatively flat interfaces regardless the presence of nanopores. Here, we report mesoporous titanium dioxide-based acoustic resonators with resonances up to 90 GHz, and quality factors from 3 to 7. Numerical simulations show a good agreement with the picosecond ultrasonics experiments. We also numerically study the effect of changes in the speed of sound on the performance of the resonator. This change could be induced by liquid infiltration into the mesopores. Our findings constitute the first step towards the engineering of building blocks based on mesoporous thin films for reconfigurable optoacoustic sensors.

Data of synthesis, characterization and luminescence measurements in 1D lanthanide coordination polymers based on lanthanides.

In this work are presented all the conditions of synthesis explored to obtain a new family of compound with formula [Ln(4-OHBBA)3(H2O)2] (Ln = La, Pr). Powder X ray diffraction was used to identify the different phases obtained in the synthetic study. FT-IR spectroscopy and TG analysis for La and Pr pure phases are also reported. Optical properties of optically active CPs materials, solid state photoluminescence properties of La, Pr, La-(5%Eu) and La-(5%Tb) compounds were explored. We report the absorption, excitation and emission spectrum of the 4'-hydroxi-4-biphenylcarboxylic acid and a comparative description of the radiative (and no-radiative) processes in solid state in Ln-(4-OHBBA) and Ln-BPDC compounds. Finally, a principal component analysis was conducted in order to take in account both signal contributions from the sensor (LCE at 384 nm and the europium emission at 610 nm) and for classifying the type of analytes used to test the sensing response of the materials.

Electrostatically Driven Protein Adsorption: Charge Patches versus Charge Regulation.

The mechanisms of electrostatically driven adsorption of proteins on charged surfaces are studied with a new theoretical framework. The acid-base behavior, charge distribution, and electrostatic contributions to the thermodynamic properties of the proteins are modeled in the presence of a charged surface. The method is validated against experimental titration curves and apparent p Kas. The theory predicts that electrostatic interactions favor the adsorption of proteins at their isoelectric points on charged surfaces despite the fact that the protein has no net charge in solution. Two known mechanisms explain adsorption under these conditions: (i) charge regulation (the charge of the protein changes due to the presence of the surface) and (ii) charge patches (the protein orients to place charged amino acids near opposite surface charges). This work shows that both mechanisms contribute to adsorption at low ionic strengths, whereas only the charge-patch mechanism operates at high ionic strength. Interestingly, the contribution of charge regulation is insensitive to protein orientation under all conditions, which validates the use of constant-charge simulations to determine the most stable orientation of adsorbed proteins. The present study also shows that the charged surface can induce large shifts in the apparent p Kas of individual amino acids in adsorbed proteins. Our conclusions are valid for all proteins studied in this work (lysozyme, α-amylase, ribonuclease A, and ß-lactoglobulin), as well as for proteins that are not isoelectric but have instead a net charge in solution of the same sign as the surface charge, i.e. the problem of protein adsorption on the "wrong side" of the isoelectric point.

Exploring physical and chemical properties in new multifunctional indium-, bismuth-, and zinc-based 1D and 2D coordination polymers.

Main group element coordination polymers (MGE-CPs) are important compounds for the development of multifunctional materials. However, there has been a shortage of studies regarding their structural, optical, catalytic, mechanical, and antibacterial properties. This work presents an exhaustive study of a set of crystalline MGE-CPs obtained from bismuth and indium metals and iminodiacetate, 1,2,4,5-benzenetetracarboxylate, and 2,2'-bipyridine as building blocks. An in-depth topological analysis of the networks was carried out. Additionally, nanoindentation studies were performed on two representative low-dimensional compounds in order to find the relationships between their structural features and their intrinsic mechanical properties (hardness and elasticity). The solid-state photoluminescence (SSPL) properties were also studied in terms of excitation, emission, lifetimes values, and CIE chromaticites. Moreover, the heterogeneous catalytic activities of the compounds were evaluated with the cyanosilylation reaction using a set of carbonylic substrates under solvent-free conditions. Finally, the inhibitory effect of the Bi-CPs on the growth of microorganisms such as Escherichia coli, Salmonella enterica serovar Typhimurium, and Pseudomonas aeruginosa, which are associated with relevant infectious diseases, is reported.

Correction: Mesoporous titania thin films as efficient enzyme carriers for paraoxon determination/detoxification: effects of enzyme binding and pore hierarchy on the biocatalyst activity and reusability.

Correction for 'Mesoporous titania thin films as efficient enzyme carriers for paraoxon determination/detoxification: effects of enzyme binding and pore hierarchy on the biocatalyst activity and reusability' by N. Francicet al., Analyst, 2014, 139, 3127-3136.

Mesoporous titania thin films as efficient enzyme carriers for paraoxon determination/detoxification: effects of enzyme binding and pore hierarchy on the biocatalyst activity and reusability.

In this work we demonstrate the efficient immobilization of histidine 6-tagged organophosphate hydrolase (His6-OPH), an organophosphate-degrading enzyme, on mesoporous titania thin films. This permits the use of the biocatalyst films as efficient tools in the detection/detoxification of paraoxon. His6-OPH was immobilized on mesoporous thin films with uniform (9 nm) and bimodal (13-38 nm) pore size distribution, through covalent attachment and physical adsorption. The biocatalyst films show good activity, and enhanced stability with respect to the free enzyme at extreme conditions of pH and temperature, especially around neutral pH and room temperature. In addition, the bioactive films can be easily separated from the reaction media and reused multiple times without significant loss of activity.

Hyaluronan degrading silica nanoparticles for skin cancer therapy.

We report the first nanoformulation of Hyaluronidase (Hyal) and its enhanced adjuvant effect over the free enzyme. Hyaluronic acid (HA) degrading enzyme Hyal was immobilized on 250 nm silica nanoparticles (SiNP) maintaining specific activity of the enzyme via the layer-by-layer self-assembly technique. This process was characterized by dynamic light scattering (DLS), zeta potential, infrared and UV-Vis spectroscopy, transmission electron microscopy (TEM) and enzymatic activity measurements. The nanoparticles were tested in vivo as adjuvants of carboplatin (CP), peritumorally injected in A375 human melanoma bearing mice and compared with the non-immobilized enzyme, on the basis of equal enzymatic activity. Alcian Blue staining of A375 tumors indicated large overexpression of hyaluronan. At the end of the experiment, tumor volume reduction with SiNP-immobilized Hyal was significantly enhanced compared to non-immobilized Hyal. Field emission scanning electron microscopy (FE-SEM) images together with energy dispersive X-ray spectroscopy (EDS) spectra confirmed the presence of SiNP on the tumor. We mean a proof of concept: this extracellular matrix (ECM) degrading enzyme, immobilized on SiNP, is a more effective local adjuvant of cancer drugs than the non-immobilized enzyme. This could prove useful in future therapies using other or a combination of ECM degrading enzymes.

Aminopropyl-modified mesoporous silica SBA-15 as recovery agents of Cu(II)-sulfate solutions: Adsorption efficiency, functional stability and reusability aspects.

Hybrid mesoporous materials are potentially useful for metal ion scavenging and retrieval because of their high surface areas, controlled accessibility and tailored functionalization. Some aspects that are linked to the performance of HMM include pore accessibility, stability of the organic functions and reusability. Knowledge of these aspects is critical in the design of adsorption-desorption protocols. In this work we produce and characterize propylamino-substituted large pore silica (SBA-15-N), which is submitted to Cu(II) adsorption from copper sulfate solutions, followed by desorption in acid media and material regeneration. We find that the hybrid material is an efficient adsorbent (1.15-1.75mmol Cu(II)g(-1)), although a fraction of the organic groups is lost during the adsorption process. An X-ray photoelectron spectroscopy (XPS) study demonstrates that the contents of amino groups are higher in the material surface, leading to different behaviors in Cu(II) complexation along the material. These materials can be regenerated by exposure to acidic media. Thermal processing of the hybrid materials leads to better durability in aqueous solutions during reprocessing, due to enhanced polycondensation of the inorganic framework. Thermally treated samples, once regenerated, are efficient adsorbents in a second step of Cu(II) adsorption. We discuss the materials processing factors involved in the improved adsorption of Cu(II), its quantitative release and reusability of the material.

Controlled deposition of silver nanoparticles in mesoporous single- or multilayer thin films: from tuned pore filling to selective spatial location of nanometric objects.

Silver nanoparticle assemblies are embedded within mesoporous oxide thin films by an in situ mild reduction leading to nanoparticle-mesoporous oxide thin-film composites (NP@MOTF). A quantitative method based on X-ray reflectivity is developed and validated with energy dispersive spectroscopy in order to assess pore filling. The use of dilute formaldehyde solutions leads to control over the formation of silver nanoparticles within mesoporous titania films. Inclusion of silver nanoparticles in mesoporous silica requires more drastic conditions. This difference in reactivity can be exploited to selectively synthesize nanoparticles in a predetermined layer of a multilayered mesoporous stack leading to complex 1D-ordered multilayers with precise spatial location of nanometric objects. The metal oxide nanocomposites synthesized have potential applications in catalysis, optical devices, surface-enhanced Raman scattering, and metal enhancement fluorescence.

Mesoporous aluminophosphate thin films with cubic pore arrangement.

Mesoporous aluminophosphate thin films with 3D cubic (Im3m) pore arrangement were synthesized for the first time. Thin films were templated with block copolymer nonionic templates Pluronic F127 and F108 and deposited on a glass substrate by dip-coating. In situ SAXS investigations show the formation of a highly ordered mesostructure upon the dip-coating process, which remains stable up to at least 670 K. A cubic mesostructure was observed also by TEM. Template removal process was monitored by TG and FT-IR. A transition from an amorphous aluminophosphate gel to a well-defined aluminophosphate framework was observed by MAS NMR.

Mesoporous hybrid thin films: the physics and chemistry beneath.

Mesoporous films containing organic or biological functions within an organised array of cavities are produced by combining sol-gel, self-assembly of supramolecular templates and surface chemistry. This paper reviews the essential physics and chemical concepts behind the synthesis of these complex multifunctional materials.

Structural control in self-standing mesostructured silica oriented membranes and xerogels.

Large pore (a = 150-200 A) wormlike and highly oriented cubic (IM3m space group) and 2D-hexagonal (P6m) mesostructured xerogels have been reproducibly synthesised by Evaporation-Induced Self Assembly (EISA). Mesostructure control was attained by changing the template (nonionic block copolymer) and water (h = [H2O]/[Si]) ratio.