SO2 capture and detection with carbon microfibers (CMFs) synthesised from polyacrylonitrile.

SO2 emissions not only affect local air quality but can also contribute to other environmental issues. Developing low-cost and robust adsorbents with high uptake and selectivity is needed to reduce SO2 emissions. Here, we show the SO2 adsorption-desorption capacity of carbon microfibers (CMFs) at 298 K. CMFs showed a reversible SO2 uptake capacity (5 mmol g-1), cyclability over ten adsorption cycles with fast kinetics and good selectivity towards SO2/CO2 at low-pressure values. Additionally, CMFs' photoluminescence response to SO2 and CO2 was evaluated.

CYCU-3: an Al(III)-based MOF for SO2 capture and detection.

The Al(III)-based MOF CYCU-3 exhibits a relevant SO2 adsorption performance with a total uptake of 11.03 mmol g-1 at 1 bar and 298 K. CYCU-3 displays high chemical stability towards dry and wet SO2 exposure. DRIFTS experiments and computational calculations demonstrated that hydrogen bonding between SO2 molecules and bridging Al(III)-OH groups are the preferential adsorption sites. In addition, photoluminescence experiments demonstrated the relevance of CYCU-3 for application in SO2 detection with good selectivity for SO2 over CO2 and H2O. The change in fluorescence performance demonstrates a clear turn-on effect after SO2 interaction. Finally, the suppression of ligand-metal energy transfer along with the enhancement of ligand-centered π* → π electronic transition was proposed as a plausible fluorescence mechanism.

Surfactant-tail control of CsPbBr3 nanocrystal morphology.

CsPbBr3 nanocrystals (NCs) are promising optoelectronic and catalytic materials. Manipulating their morphology can improve their properties and stability. In this work, an alkene-derived zwitterionic ligand was used to control the morphology of CsPbBr3 NCs to yield the highly unusual rhombicuboctahedron morphology, showcasing the first example of a surfactant-tail controlled growth.

SU-101: a Bi(III)-based metal-organic framework as an efficient heterogeneous catalyst for the CO2 cycloaddition reaction.

A non-porous version of SU-101 (herein n-SU-101) was evaluated for the CO2 cycloaddition reaction. The findings revealed that open metal sites (Bi3+) are necessary for the reaction. n-SU-101 displays a high styrene oxide conversion of 96.6% under mild conditions (3 bar and 80 °C). The catalytic activity of n-SU-101 demonstrated its potential application for the cycloaddition of CO2 using styrene oxide.

Detection of SO2 using a chemically stable Ni(II)-MOF.

The MOF-type Ni2(dobpdc) shows a high chemical stability towards SO2, high capacity for SO2 capture at low pressure (4.3 mmol g-1 at 298 K and up to 0.05 bar), and exceptional cycling performance. Fluorescence experiments demonstrated the SO2 detection properties of Ni2(dobpdc) with a remarkable SO2 detection selectivity. Finally, time-resolved photoluminescence experiments provided a plausible mechanism of SO2 detection by this Ni(II)-based MOF material.

Modulated self-assembly of three flexible Cr(III) PCPs for SO2 adsorption and detection.

Modulated self-assembly protocols are used to develop facile, HF-free syntheses of the archetypal flexible PCP, MIL-53(Cr), and novel isoreticular analogues MIL-53(Cr)-Br and MIL-53(Cr)-NO2. All three PCPs show good SO2 uptake (298 K, 1 bar) and high chemical stabilities against dry and wet SO2. Solid-state photoluminescence spectroscopy indicates all three PCPs exhibit turn-off sensing of SO2, in particular MIL-53(Cr)-Br, which shows a 2.7-fold decrease in emission on exposure to SO2 at room temperature, indicating potential sensing applications.

Incorporation of Conjugated Diynes in Perovskites and their Post-Synthetic Modification.

Two-dimensional (2D) organic-inorganic hybrid perovskites have rapidly become an attractive alternative to three-dimensional (3D) perovskites as solar cell absorbers, owing to their improved stability, versatility, and ease of processing. Despite their advantages, the insulating nature of the organic cations makes these materials have lower absorbing and conducting properties, resulting in lower device efficiencies. A way to circumvent these issues is the integration of functional molecules that help mitigate these limitations. In this study, six new perovskites composed of three distinct diynes are synthesized, all of which can be thermally polymerized to form conjugated polymers within the perovskite layers. The incorporation of conjugated polymers results in drastic changes in these materials' optoelectronic properties and their overall stability. Furthermore, depending on the nature of the diyne and the inorganic layers, the materials show varying polymerization yields, optical bandgaps, and charge carrier densities. These results afford significant insight into the chemical nature of the polymerized species and thus highlight the versatility of this approach to post-synthetically generate conducting polymers within the layers of 2D perovskites, paving the way toward their use in optoelectronic devices.

SO2 capture and detection using a Cu(II)-metal-organic polyhedron.

The SO2 adsorption-desorption capacity at room temperature and 1 bar of the metal-organic polyhedron MOP-CDC was investigated. In addition, the qualitative solid-state absorption-emission properties of this material (before and after SO2 exposure) were measured and tested, and it demonstrated remarkable capability for SO2 detection. Our results represent the first example of fluorimetric SO2 detection in a MOP.

Chemical crystallography by serial femtosecond X-ray diffraction.

Inorganic-organic hybrid materials represent a large share of newly reported structures, owing to their simple synthetic routes and customizable properties1. This proliferation has led to a characterization bottleneck: many hybrid materials are obligate microcrystals with low symmetry and severe radiation sensitivity, interfering with the standard techniques of single-crystal X-ray diffraction2,3 and electron microdiffraction4-11. Here we demonstrate small-molecule serial femtosecond X-ray crystallography (smSFX) for the determination of material crystal structures from microcrystals. We subjected microcrystalline suspensions to X-ray free-electron laser radiation12,13 and obtained thousands of randomly oriented diffraction patterns. We determined unit cells by aggregating spot-finding results into high-resolution powder diffractograms. After indexing the sparse serial patterns by a graph theory approach14, the resulting datasets can be solved and refined using standard tools for single-crystal diffraction data15-17. We describe the ab initio structure solutions of mithrene (AgSePh)18-20, thiorene (AgSPh) and tethrene (AgTePh), of which the latter two were previously unknown structures. In thiorene, we identify a geometric change in the silver-silver bonding network that is linked to its divergent optoelectronic properties20. We demonstrate that smSFX can be applied as a general technique for structure determination of beam-sensitive microcrystalline materials at near-ambient temperature and pressure.

Efficient Emission in Halide Layered Double Perovskites: The Role of Sb3+ Substitution in Cs4Cd1-xMnxBi2Cl12 Phosphors.

Layered double perovskites have the potential to further expand the vast space of optoelectronic properties and applications of halide perovskites. Among the ∼60 known members, to date only the ⟨111⟩-oriented layered double perovskites, Cs4Cd1-xMnxBi2Cl12, have shown efficient photoluminescence (PL). The replacement of Bi with Sb in these materials was investigated, resulting in two new families of layered inorganic perovskite alloys with full solubility. The first, Cs4Cd1-xMnxSb2Cl12, exhibits a PL emission at 605 nm ascribed to Mn2+ centers, with a maximum quantum yield of 28.5%. The second, Cs4Cd0.8Mn0.2(Sb1-yBiy)2Cl12, contains a fixed amount of Mn2+ and Cd2+ but variable Sb3+ and Bi3+ concentrations. We observed a decreased efficiency of the Cs4Cd1-xMnxSb2Cl12 family compared to that of Cs4Cd1-xMnxBi2Cl12, which was attributed to a decreased spin-orbit and Jahn-Teller couplings in Sb and the subsequent increased electronic delocalization. The present work lays out a roadmap to achieve high photoluminescence efficiencies in layered double perovskites.

Influence of Calcium Scaling on Corrosion Behavior of Steel and Aluminum Alloys.

Calcium scaling is a serious problem encountered in the oil and gas industry because it is common that brines produced alongside oil and gas exhibit high concentrations of calcium ions, among others, which is expensive to remedy. The precipitation of calcium salts on the internal wall of the pipelines may occur because of the physical and chemical changes as fluids are produced from downhole to surface facilities. Although different researchers have address scaling and corrosion in the oil and gas industry, there are few reports in the literature relating the corrosion and scaling phenomena simultaneously. Despite there being indications that scales may produce corrosion problems, affecting the mechanical integrity of the infrastructure, there is minimal research in the literature addressing such relations. Previous studies presented aluminum alloys as excellent and reliable materials for applications in the petroleum industry, such as drilling activities. In this work, we evaluate the corrosion behavior of steel and aluminum alloys under highly scaling environments using supersaturated brines. Our results show that the presence of calcium carbonate and calcium sulfate as a scaling environment increases the corrosion rates for aluminum alloys and carbon steel; however, the same environments do not affect the corrosion behavior of stainless steel.

Fluorometric detection of iodine by MIL-53(Al)-TDC.

The fluorescent properties of MIL-53(Al)-TDC are drastically changed due to the presence of iodine, even in small quantities, as a result of an energy transfer process from the host material (MIL-53(Al)-TDC) to the guest molecule (I2). While MIL-53(Al)-TDC's emission spectrum shows a weak and broad band, after I2 adsorption, it exhibits well-resolved and long-lasting emission lines, which could be exploited for iodine detection. Density Functional Theory periodical calculations demonstrated that in the most stable MIL-53(Al)-TDCI2 configuration, the I2 molecule is bonded mainly by an O-HI hydrogen bond. The QTAIM showed that other non-covalent interactions also provided stability to MIL-53(Al)-TDCI2. The electrostatic potential analysis indicated that the I2 molecule adsorption occurs by a combination of specific interactions with a strong electrostatic contribution and weak interactions. These results postulate fluorescent MIL-53(Al)-TDC as an efficient I2 detector (potentially for radioactive I2), using a simple fluorimetric test.

Two-Dimensional Halide Perovskites in Solar Cells: 2D or not 2D?

Two-dimensional (2D) halide perovskites have recently emerged as a more stable and more versatile family of materials than three-dimensional (3D) perovskite solar cell absorbers. Although solar cells made with 2D perovskites have yet to improve their power conversion efficiencies to compete with 3D perovskite solar cells, their immense diversity offers great opportunities and avenues for research that will likely close the gap between these two. Further, 2D perovskites can have various roles within a solar cell, either as the primary light absorber, as a capping layer, passivating layer, or within a mixed 2D/3D perovskite solar cell absorber. In this Minireview, we will review the history of 2D perovskites in solar cells, the relevant properties of such materials, the different roles that they can play in a solar cell, as well as current trends and challenges.

Thousand-fold Conductivity Increase in 2D Perovskites by Polydiacetylene Incorporation and Doping.

Two-dimensional (2D) organic-inorganic perovskites have rapidly become an attractive alternative to traditional three-dimensional (3D) perovskite solar-cell absorbers owing to their improved stability and processability. Despite their advantages, the insulating nature of the organic cations and diminished light absorption limit their overall performance. Herein, it is demonstrated that the incorporation of conjugated diynes in hybrid 2D perovskites, and subsequent thermal treatment results in the formation of 2D perovskites that incorporate polydiacetylenes in their structure. Furthermore, it is shown that oxygen or iodine doping results in the formation of stable radicals within the material alongside a drastic shift of the band gap from 3.0 to 1.4 eV and in-plane conductivity improvements of up to three orders of magnitude, which lead to record conductivities for 2D halide perovskites (n=1).

Confinement of H2O and EtOH to enhance CO2 capture in MIL-53(Al)-TDC.

EtOH sorption properties were investigated in MIL-53(Al)-TDC and found a strong interaction between EtOH and the MOF material (ΔHads = 69.6 kJ mol-1). CO2 capture was enhanced upon confining small amounts of H2O. Upon confining small amounts of EtOH however, the CO2 uptake was not improved. The difference in CO2 uptake with EtOH and H2O was rationalised using computational calculations. The analysis of the quantum theory of atoms in molecules (QTAIM) showed a covalent interaction between a MOF model and confined molecules (EtOH and H2O), and no difference in the hydrogen bonds between confined molecules and CO2.

Sterically controlled mechanochemistry under hydrostatic pressure.

Mechanical stimuli can modify the energy landscape of chemical reactions and enable reaction pathways, offering a synthetic strategy that complements conventional chemistry. These mechanochemical mechanisms have been studied extensively in one-dimensional polymers under tensile stress using ring-opening and reorganization, polymer unzipping and disulfide reduction as model reactions. In these systems, the pulling force stretches chemical bonds, initiating the reaction. Additionally, it has been shown that forces orthogonal to the chemical bonds can alter the rate of bond dissociation. However, these bond activation mechanisms have not been possible under isotropic, compressive stress (that is, hydrostatic pressure). Here we show that mechanochemistry through isotropic compression is possible by molecularly engineering structures that can translate macroscopic isotropic stress into molecular-level anisotropic strain. We engineer molecules with mechanically heterogeneous components-a compressible ('soft') mechanophore and incompressible ('hard') ligands. In these 'molecular anvils', isotropic stress leads to relative motions of the rigid ligands, anisotropically deforming the compressible mechanophore and activating bonds. Conversely, rigid ligands in steric contact impede relative motion, blocking reactivity. We combine experiments and computations to demonstrate hydrostatic-pressure-driven redox reactions in metal-organic chalcogenides that incorporate molecular elements that have heterogeneous compressibility, in which bending of bond angles or shearing of adjacent chains activates the metal-chalcogen bonds, leading to the formation of the elemental metal. These results reveal an unexplored reaction mechanism and suggest possible strategies for high-specificity mechanosynthesis.

A Direct Bandgap Copper-Antimony Halide Perovskite.

Since the establishment of perovskite solar cells (PSCs), there has been an intense search for alternative materials to replace lead and improve their stability toward moisture and light. As single-metal perovskite structures have yielded unsatisfactory performances, an alternative is the use of double perovskites that incorporate a combination of metals. To this day, only a handful of these compounds have been synthesized, but most of them have indirect bandgaps and/or do not have bandgaps energies well-suited for photovoltaic applications. Here we report the synthesis and characterization of a unique mixed metal ⟨111⟩-oriented layered perovskite, Cs4CuSb2Cl12 (1), that incorporates Cu2+ and Sb3+ into layers that are three octahedra thick (n = 3). In addition to being made of abundant and nontoxic elements, we show that this material behaves as a semiconductor with a direct bandgap of 1.0 eV and its conductivity is 1 order of magnitude greater than that of MAPbI3 (MA = methylammonium). Furthermore, 1 has high photo- and thermal-stability and is tolerant to humidity. We conclude that 1 is a promising material for photovoltaic applications and represents a new type of layered perovskite structure that incorporates metals in 2+ and 3+ oxidation states, thus significantly widening the possible combinations of metals to replace lead in PSCs.

Hybrid metal-organic chalcogenide nanowires with electrically conductive inorganic core through diamondoid-directed assembly.

Controlling inorganic structure and dimensionality through structure-directing agents is a versatile approach for new materials synthesis that has been used extensively for metal-organic frameworks and coordination polymers. However, the lack of 'solid' inorganic cores requires charge transport through single-atom chains and/or organic groups, limiting their electronic properties. Here, we report that strongly interacting diamondoid structure-directing agents guide the growth of hybrid metal-organic chalcogenide nanowires with solid inorganic cores having three-atom cross-sections, representing the smallest possible nanowires. The strong van der Waals attraction between diamondoids overcomes steric repulsion leading to a cis configuration at the active growth front, enabling face-on addition of precursors for nanowire elongation. These nanowires have band-like electronic properties, low effective carrier masses and three orders-of-magnitude conductivity modulation by hole doping. This discovery highlights a previously unexplored regime of structure-directing agents compared with traditional surfactant, block copolymer or metal-organic framework linkers.

A layered hybrid perovskite solar-cell absorber with enhanced moisture stability.

Two-dimensional hybrid perovskites are used as absorbers in solar cells. Our first-generation devices containing (PEA)2(MA)2[Pb3I10] (1; PEA=C6H5(CH2)2NH3(+), MA=CH3NH3(+)) show an open-circuit voltage of 1.18 V and a power conversion efficiency of 4.73%. The layered structure allows for high-quality films to be deposited through spin coating and high-temperature annealing is not required for device fabrication. The 3D perovskite (MA)[PbI3] (2) has recently been identified as a promising absorber for solar cells. However, its instability to moisture requires anhydrous processing and operating conditions. Films of 1 are more moisture resistant than films of 2 and devices containing 1 can be fabricated under ambient humidity levels. The larger bandgap of the 2D structure is also suitable as the higher bandgap absorber in a dual-absorber tandem device. Compared to 2, the layered perovskite structure may offer greater tunability at the molecular level for material optimization.

Trinuclear Pd3O2 intermediate in aerobic oxidation catalysis.

The activation of O2 is a key step in selective catalytic aerobic oxidation reactions mediated by transition metals. The bridging trinuclear palladium species, [(LPd(II))3(µ(3)-O)2](2+) (L=2,9-dimethylphenanthroline), was identified during the [LPd(OAc)]2(OTf)2-catalyzed aerobic oxidation of 1,2-propanediol. Independent synthesis, structural characterization, and catalytic studies of the trinuclear compound show that it is a product of oxygen activation by reduced palladium species and is a competent intermediate in the catalytic aerobic oxidation of alcohols. The formation and catalytic activity of the trinuclear Pd3O2 species illuminates a multinuclear pathway for aerobic oxidation reactions catalyzed by Pd complexes.